System Not Dual Boot After System Restore In Windows 7
Oct 19, 2012
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies
ADVERTISEMENT
May 8, 2012
I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies
View Related
Aug 10, 2011
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies
View Related
Jun 23, 2010
I have sony vaio laptop and i was running windows vista on it. I did a partition and dual boot the system with ubuntu 10.4. Then i download easybcd tool to set windows vista as a default OS to boot with, but accidently in easybcd software i unistalled vista boot loader. now when i reboot the system ubuntu works fine but when i try to load vista its says NTLDR is missing Press Ctrl+Alt and Delete to restart. Then tried to boot from cdrom because i have a fresh copy of Windows 7. the system doesnt boot from cdrom. So now i am stuck with ubuntu on my system.
View 1 Replies
View Related
Mar 8, 2011
I have a system that dual boots with Windows 7 (64 bit) and Windows XP (32 bit); each OS is on its own hard drive. I want to reformat the Windows 7, deleting the OS in the process. What I'm wondering is where is the boot loader located? Is it on the Windows 7 drive (since it was installed after XP), and will I need to do anything special to have the system load Windows XP by default after the Windows 7 installation is gone? Will the system simply detect the old XP installation and load it without the bootloader?
View 2 Replies
View Related
Mar 6, 2011
I want to keep XP for compatibility reasons with some older hardware I still use often. I have XP installed on one hard drive and Windows 7 installed on another. When I installed Windows 7, I just went with the option for it to install a boot manager, and have been using that one ever since to dual boot my system. Nothing special, but it works.The current motherboard is an ASUS model, and has always had problems with the USB section (it took me quite a while to realize it was a motherboard problem, though). Then it began to develop problems reading the DVD drive several months after I installed it (back when it was only an XP system). Once again, not suspecting the motherboard, I replaced the DVD drive, thinking it had gone bad -- it hadn't, works fine in another system. And pretty soon thereafter the current drive began to work sporadically, and now doesn't work at all. Same as before.
This ASUS mb has a 3-year warranty, and it's not quite 2 years old. So, I should probably just suck it up and jump through the dozen or so hoops they toss in your path to get the mb repaired/replaced. Still, I'm guessing that if I'm successful, I may end up with a mb that is different enough from the one I have now where it's gonna break Windows 7 and XP.
I went through this when I originally replaced the motherboard, and ended up having to completely reinstall XP, reactivate it, and then d/l all the updates. I guess I'll be looking at having to do this now for both OSes, eh? If I have to reinstall both OSes, I'm thinking that I should install XP first, then Windows 7, mostly to preserve the dual-boot capabilty?
If I don't get satisfaction from ASUS, I'll probably just drop back 10 and punt, and go with a new mb. I'm gonna try to avoid this though because it's getting harder and harder to find mbs with PCI slots (I need three). I guess if I do this, it will probably amount to the same amount of work as if ASUS sends me a board that is substantially different from the old one.
View 9 Replies
View Related
Dec 10, 2012
I've just ran a full system restore on my niece's Dell Inspiron N5030 which runs Windows 7. After the restore the laptop restarted and went into the setup screen... then it tells me it's unable to continue the setup whilst in safe mode and asks me to restart...thus the loop continues.how to start in normal mode and continue the setup?I've tried going to the black boot screen which has a variety of options including "Start Windows Normally" but none of these worked.
View 10 Replies
View Related
Jan 15, 2012
I used to have Windows 7 which works flawlessly... I used to have linux Mint 11 dual booting with Windows 7, I recently upgraded to Linux Mint 12 and from that upgrade I cannot see the windows 7 option in the boot menu.. I tried to reinstall the boot loader of windows 7 from the Windows 7 CD but when I press "Repair Your Computer" then it does not show any operating system existing on my computer... install the boot menu in the MBR again.
View 1 Replies
View Related
Feb 15, 2013
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies
View Related
May 29, 2012
In my system I have three operating systems installed for me to boot into - Windows 7, XP & Ubuntu. Windows 7 is the default and probably even the most used one.The problem is that each time I boot into Windows XP, Windows 7's system restore points get wiped out totally. The same does not happen with XP though.
View 14 Replies
View Related
Feb 6, 2012
I have just given my Dad my old PC, to replace his ancient one from around 2000.It has a SATA hard drive with Windows 7 installed on it. The problem is he can't use his old printer with Windows 7. There is an available driver, but when I attempt to extract it, the message says there isn't enough storage space. This seems a bit crazy to be honest, as it;s not a very big hard drive (75GB total), but there is around 30GB free.Anyway, unless you guys have a solution to that problem I was going to take his old hard drive (80GB) and put XP on it and make a dual boot setup. Then he could use his printer in that at least. I was wondering though if I could simply pop that one into the new machine as it does currently have a recently installed copy of XP on it. I am aware that this may cause issues, but I wanted some good advice.
Also, this hard drive is an old style one (the one with the jumper) settings and I only have one connection on the motherboard for it. So I have had to connect the DVD drive and the hard drive on the same cable. I know that's not ideal, but it seems like there isn't another option. That won't cause problems with the dual boot setup will it?
View 2 Replies
View Related
Jul 8, 2012
I have:
4 hard drives
1 160 gigabyte at sata controller 0 position 0
1 64 gigabyte at 0 1
2 bluesy drives at 1 2 & 3
1 1tb drive at 1 4
1 2tb drive at 1 5
The 1 tb is a Debian system running ext4
The 2 tb is a data drive running ext4
The 64 gb is empty And the 160 is empty and where I intend to install windows However it seems that I can't it is not partitioned however when ever I say that it is to be partitioned through the windows install partitioner it again says that it's invalid and I can not continue?
View 5 Replies
View Related
Jan 1, 2013
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies
View Related
Aug 29, 2012
I was trying to make a dual boot system and came across this problem. I have two HDDs, one with Win XP in it and other in which I am trying to load Win 7. I made a primary partition (NTFS) through Win XP in the second HDD (labelled it I) and started loading Win 7 through a bootable pendrive. Things went fine till the installation was complete. Then, when I restarted the system, there was no Boot manager screen, Win 7 just started booting the system ! When I looked into the file system, the partition in which Win7 was installed (I: ) was labelled to C (whereas C was the name of the partition in which Win XP is installed !).
I have two queries:
1. Is it possible to install Win 7 in drive labelled I only (I understand that physically it is the same drive in which I had intended to install it). That's because a small sys. reserved folder is getting created which (most probably) is storing the swap data.
2. How to get the boot manager screen option ie. get the selection screen in the beginning to select b/w XP and 7.
View 9 Replies
View Related
Sep 29, 2009
i am running a dual boot system with Vista 32 bit and Windows7 32bit
also using 190.62 nvidia driver on both,with samsung 20'' monitor in
16 x 10i play a game called silent hunter3 online and offline
if i play on vista the driver allows me to switch between 4.3 & 16x10
on windows7 it dosn't allow me to switch,it defaults to 4.3
the game in question is set to 1024x700 it can't be changed.there is some
fault with windows7 not useing the driver the way it should.
View 2 Replies
View Related
Feb 12, 2011
In a dual boot system with 2 hard drives, one for Vista and one for Win 7, do both OS partitions need to be "Active & Boot & System"?
View 7 Replies
View Related
May 18, 2011
My PC is set up for dual booting...first OS installed is Windows XP sp3 and the second is Windows 7 Ultimate x32. Both are installed on separate hard drives. I want to reformat the drive with Windows 7 on it and do a clean install of itctions on how to do this? For some reason I can't get the PC to boot up with the DVD disc instead of the hard drives, and I don't know much about the BIOS to mess around in there.
View 5 Replies
View Related
Sep 29, 2009
Just today I needed to reinstall XP on the same partition that it was on. Now my problem is that because of the reinstall, the bootloader that Windows 7 changed is now gone and I no longer have the option to select Win 7 during bootup.
Is there away to get the option back without having to re-install Windows 7 all over again?
View 9 Replies
View Related
Jan 18, 2009
I have Vista and W7 dual-booting. I was using iTunes on Vista, and now wish to use it in W7, using the same library. Has anyone achieved this? If so, how?
View 8 Replies
View Related
Jun 24, 2012
Earlier this evening I downloaded My Colors and put it on my computer. For some reason it wouldn't load up all the icons and was messing up my browser when I would go online. I did a system restore back to a previous date. Now I am in a huge mess. It will not boot up fully. I get a window with an easy access button in the lower left corner and a shut down button in the lower right corner and that is it. I don't want to do a full restore. I have a Dell Inspiron 1545 laptop. It is running Windows 7. I'm not sure what more information you need or that I can really get to you at this time.
View 4 Replies
View Related
Apr 18, 2012
I got the smart hdd virus last night, I tried to install malwarebytes but it was blocked by the virus, so I did a system restore from safe mode to 5 days ago. When the restore finished, it booted and said that the restore had not fully worked, but it appeared to have had, with all my files visible again, same with my programs. I then installed malwarebytes and restarted. In the middle of booting windows, it bsod'ed, I did not catch the error message. It does this when I try to boot every time. When it goes into system repair, this message:Windows failed to start. A recent hardware or software change may have caused the problem. To fix this:
1. Insert your windows installation disc and restart the computer.
2. Choose your language settings, then click next.
3. Click repair your computer.
If you do not have this disc, please contact your system admin or manufacturer for assistance.Status: 0xc000000e Info: The boot selection failed because a required device is inaccessable.I do not have a Win 7 home premium disc, only a win7 pro disc. I am able to make a clean install if required with the pro disc.Will this work with the windows 7 professional disc?
View 3 Replies
View Related
May 25, 2011
I have my hard drive partitioned to boot Windows 7 and Kubuntu 10.04. The default operating system is set to Kubuntu but I would like to change this to Windows 7.
View 1 Replies
View Related
Oct 20, 2009
I have just got my Win XPpro 32bit & Windows 7 64bit dual boot system working fine, but i have a problem with syncing mail between the 2 OS's, is it possible and how do i do it.
View 3 Replies
View Related
Dec 30, 2009
Well, I did a dual-boot system with Vista 32-bit and 7 64-bit. Now the problem is that, when I'm in Vista, the drive letter of Vista would be C: and 7 would be in B:.
But when I'm in 7, its partition would have the letter C: while Vista would have B:.
Is this normal? What would happen if I installed a program on the path C: in Windows 7?
View 4 Replies
View Related
Jul 6, 2009
I am dual booting Vista and Windows7 RC 7100. They are both on the same Hard Drive on different partitions. I have made the decision to stick with the new OS (Windows7) and give Vista the boot. So I want to get rid of the extra partition and revert to a single OS (Windows7).
I don't want to reformat the whole hard drive and completely re-install the windows7 operating system. I want to remove Vista from the dual boot menu and keep windows7. Then I want to format the Vista Partition. How can I do this and keep my present installation of Windows7 without having to reinstall Windows7?
View 6 Replies
View Related
Jan 15, 2013
I am at a bit of a loss here in regards to partitions, as I've never really done it, I want to configure a new system setup under the following circumstances:
SSD(1): (dual-boot OS drive)
+ Partition 1: Windows 7
+ Partition 2: Windows Server 2012
SSD(2): (program / file drive)
+ Partition 1: one large single partition for application / program storage; e.g., Visual Studio 2012 and SharePoint Server 2013.
I need to have an instance of Windows Server to use SharePoint Server. At times I will want to run the server set-up to facilitate TFS and SharePoint with a very small team of developers, school related for example. And at other times I would like to boot into Windows 7 Ultimate so I can have a normal browsing experience and play games, etc. But of course I could also develop with VS11.X in Win 7 environment if needed.
My question, is what I'm proposing possible? I want to use Windows 7 normally most the times, but at others I will require Server 2012 to use SharePoint. Can I share the same program resources on the second SSD regardless what OS I boot into? What issues may rise if I tried running SharePoint (or just having SharePoint) while booted into Windows 7? Will I have to create two partitions on the 2nd SSD, a copy of apps for each OS due to system registry constraints.
View 1 Replies
View Related
May 10, 2012
I am attempting to restore from a system image, but keep receiving a boot manager error message: Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible
The computer boots no problem normally, it is only when restarting to restore the system image.
View 4 Replies
View Related
Mar 28, 2012
I have a new Toshiba Qosmio X770 laptop with Dual 120 Gb SSD drives. From the factory it had Win 7 Home. I upgraded immediately to Win 7 Ultimate x64. I set up the VM to use XP (Have to use XP because current dev projects with work are stuck in old ages on XP for the time being). I can run the XP Mode in VM fine and even Visual Studios functions fine. There is a problem with the 3rd party drivers for the USB comm boards we are using, the USB drivers apparently cannot be shared across the VM environment for the particular ones we are using.
View 1 Replies
View Related
Aug 28, 2012
how to enable dual boot os selection during system startup after installing xp in Windows 7
View 2 Replies
View Related
Mar 8, 2012
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
View 3 Replies
View Related
Sep 21, 2012
After a power outage, my windows 7 will not boot without going into safe mode.How can I restore my system to boot automatically without going into safe mode.
View 1 Replies
View Related
