System Restore Won't Let Computer Boot All The Way Up?
Jun 24, 2012
Earlier this evening I downloaded My Colors and put it on my computer. For some reason it wouldn't load up all the icons and was messing up my browser when I would go online. I did a system restore back to a previous date. Now I am in a huge mess. It will not boot up fully. I get a window with an easy access button in the lower left corner and a shut down button in the lower right corner and that is it. I don't want to do a full restore. I have a Dell Inspiron 1545 laptop. It is running Windows 7. I'm not sure what more information you need or that I can really get to you at this time.
View 4 Replies
ADVERTISEMENT
Jan 4, 2013
A few days ago, I went to turn on my computer and it just gave me a black screen after the "Starting Windows" screen. I attempted to use System Repair, which failed. It said there was an unspecified error possibly caused by a change in system configuration. I have not changed anything on my computer, for the record, between the last time it worked and now. My husband said it downloaded updates, which would explain why it was off in the first place instead of just being on stand-by. Anyway, I then tried System Restore, which also failed. I can get it to start in Safe Mode with Networking, but it seems that everything I try to run to figure out what the problem is, is saying it can't find the problem. I enabled bootlogging and found this...
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%teredo.displayname%;Microsoft Teredo Tunneling Adapter
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @netavpna.inf,%mp-agilevpn-dispname%;WAN Miniport (IKEv2)
[code]....
View 3 Replies
View Related
Mar 28, 2012
my desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies
View Related
Oct 19, 2012
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies
View Related
Apr 18, 2012
I got the smart hdd virus last night, I tried to install malwarebytes but it was blocked by the virus, so I did a system restore from safe mode to 5 days ago. When the restore finished, it booted and said that the restore had not fully worked, but it appeared to have had, with all my files visible again, same with my programs. I then installed malwarebytes and restarted. In the middle of booting windows, it bsod'ed, I did not catch the error message. It does this when I try to boot every time. When it goes into system repair, this message:Windows failed to start. A recent hardware or software change may have caused the problem. To fix this:
1. Insert your windows installation disc and restart the computer.
2. Choose your language settings, then click next.
3. Click repair your computer.
If you do not have this disc, please contact your system admin or manufacturer for assistance.Status: 0xc000000e Info: The boot selection failed because a required device is inaccessable.I do not have a Win 7 home premium disc, only a win7 pro disc. I am able to make a clean install if required with the pro disc.Will this work with the windows 7 professional disc?
View 3 Replies
View Related
Mar 27, 2012
my computer doesn't have 'factory settings'.I'm not all that versed in computers and this is the first one I've build on my own, however, it's beginning to run very slowly and I would like to completely restore it back to it's original form, from when I first built it.I have my windows discs (but i don't have the drivers for my hardware, which I'm assuming I can find online).Is there a way to restore a home build computer? Everything I've read talks about 'factory settings'.
View 4 Replies
View Related
May 10, 2012
I am attempting to restore from a system image, but keep receiving a boot manager error message: Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible
The computer boots no problem normally, it is only when restarting to restore the system image.
View 4 Replies
View Related
Jan 14, 2013
my computer says windows is starting up, then windows is shutting down.
View 1 Replies
View Related
Oct 22, 2012
so i dont know what happened to my hard drive but it went blank, so not it real life but i have a very very old computer. Its one of em hp media center pc's from the 2007 or the 2006. my intel thingy is intel platinum 4. my windows is windows 7 and when i launch the system repair disk it does not sense my hard drive and when i dont launch a disk in the computer and i boot it it says "please insert a boot disk or press a key to boot thingy"
View 9 Replies
View Related
Dec 10, 2012
I've just ran a full system restore on my niece's Dell Inspiron N5030 which runs Windows 7. After the restore the laptop restarted and went into the setup screen... then it tells me it's unable to continue the setup whilst in safe mode and asks me to restart...thus the loop continues.how to start in normal mode and continue the setup?I've tried going to the black boot screen which has a variety of options including "Start Windows Normally" but none of these worked.
View 10 Replies
View Related
Jan 15, 2012
I used to have Windows 7 which works flawlessly... I used to have linux Mint 11 dual booting with Windows 7, I recently upgraded to Linux Mint 12 and from that upgrade I cannot see the windows 7 option in the boot menu.. I tried to reinstall the boot loader of windows 7 from the Windows 7 CD but when I press "Repair Your Computer" then it does not show any operating system existing on my computer... install the boot menu in the MBR again.
View 1 Replies
View Related
Sep 21, 2012
After a power outage, my windows 7 will not boot without going into safe mode.How can I restore my system to boot automatically without going into safe mode.
View 1 Replies
View Related
Jul 31, 2011
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies
View Related
Dec 24, 2011
I'm writing this from a different computer because I can't even get onto the internet on mine.Pretty much all programs fail to run. When I double-click on the icon, I get the usual spinning "loading" circle and then nothing happens.When I try to open straight from a saved file, I get an error message. For example, whenever I try to open a word doc, I get this error message: "There was a problem sending the command to the program."Symantec Endpoint Protection has been turned off and every time I go to the Action Center to turn it back on, nothing happens. I get the usual message that asks if I want to allow the change and when I click "allow," nothing changes.I've done several system restores, even in Safe Mode, and they have all failed. System repairs have all failed too. Obviously, virus scans are out of the question and Windows Defender (one of the programs that actually will run) keeps telling me that there is no malicious software to be found on my system.
This all started yesterday afternoon. I was running Firefox as usual and had a word document open that I was typing in. I walked away from my laptop and when I came back, there were three pop-ups on the screen from a virus that I had just managed to get rid of several days before. I closed them out and was preparing to run Malwarebytes when my computer shut itself down suddenly. There haven't been any pop-ups or anything that would indicate that this is a virus. However, I tried the same fix that I used to remove the virus the first time (copying the Malwarebyes file 'mbam.exe' to the desktop and naming it as 'mbam.COM' so that it will open) but even that does not work. I've tried the regedit fix that I've found in forums here but that didn't work either.
View 9 Replies
View Related
Dec 8, 2012
My computer has been stuck at "please wait while your windows files and settings are being restored System restore is restoring the registry" for almost 24 hours. I have a Toshiba with Windows 7 home premium 64bit .
View 1 Replies
View Related
Oct 21, 2012
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies
View Related
May 29, 2012
In my system I have three operating systems installed for me to boot into - Windows 7, XP & Ubuntu. Windows 7 is the default and probably even the most used one.The problem is that each time I boot into Windows XP, Windows 7's system restore points get wiped out totally. The same does not happen with XP though.
View 14 Replies
View Related
Apr 10, 2012
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies
View Related
Sep 17, 2012
I recently did a system restore to factory settings and now my computer is running very slow. I have done all the windows updates and checked for any updates on the drivers. I also defraged it. I noticed that the physical memory is always very high between 85 and 100. The CPU is 10-50.
View 5 Replies
View Related
Aug 18, 2012
Computer frozen on restore systems after power outage. I cannot use disc 2 reboot - all keyboard actions frozen. All I want to know is - would I have lost what's on my hard drive and how to be able 2 get it running again.
View 3 Replies
View Related
Feb 5, 2013
I am losing my system restore points and my computer is not creating them on its own.
View 5 Replies
View Related
Aug 10, 2011
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies
View Related
Jan 1, 2013
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies
View Related
Dec 23, 2011
I have an Acer Aspire timeline computer I bought 2 years ago. This computer advertised great battery life, internal cooling, and all sorts of other cool things....unfortunately, it was all a lie. But enough about that, As of like 3 days ago, I noticed my computer would respond slowly and take forever to complete a shutdown. I thought nothing of it until I decided to scan it usingSuperAntiSpyware. It came back with 40 tracking cookies, which I deleted. Upon rebooting my computer, I noticed it was still running slowly. So I decided a system restore would be niceI tried the first availible restore date. That apparently failed. Then I tried several others, with no success. I kept getting error codes telling me that the system restore failed to extract the file. It said the disk failiure might have been caused by bad sectors....I have no idea what that means. Ive tried multiple restore dates, they all come back with the same message.
I do not have Norton on my computer ( I read this was part of the problem in many other machines with the same restore error, but just to make it clear, that is not part of the problem with my computer). I can only use my computer in safe mode, because the regular boot mode is wayy too slow and laggy. Also I have plenty space on my computer so it couldnt possibly be slowing down because its getting full or something.
View 8 Replies
View Related
Jan 27, 2011
After switching on computer win7 x32 receive the error RPLUD is compressed. Press CTRL+ALT+DEL to restart After switching on your computer received the error RPLUD is compressed. Press CTRL+ALT+DEL to restart on a black screen with white writing when trying to boot into Windows.Also tried to system restore by inserting win 7 disk but its also not happening.I keep getting the following from all the restore points I try."System Restore did not complete successfully. Your computer�s system files and settings were no changed.
Details:System Restore failed to extract the file (C:) from the restore point. An unspecified error occurred during System Restore. (0x8000ffff)You can try System Restore again and choose a different restore point. If you continue to see this error, you can try an advanced recovery method. For more information, see What is Recovery?"
View 1 Replies
View Related
Jun 26, 2011
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies
View Related
Feb 9, 2012
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies
View Related
Dec 28, 2011
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies
View Related
Apr 17, 2012
not A legel verison of window 7. wont to restore to factory setings.
View 1 Replies
View Related
Jan 18, 2013
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies
View Related
Aug 26, 2012
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies
View Related
