My computer has been stuck at "please wait while your windows files and settings are being restored System restore is restoring the registry" for almost 24 hours. I have a Toshiba with Windows 7 home premium 64bit .
View 1 RepliesI am having trouble with a friends computer... his computer was becoming unresponsive with up to an hour start up times before he was able to use it. We tried to run anti-virus software but wouldn't complete any scans.
We decided to go ahead and save all the files he needed and do a complete system recovery f11 (format hard drives back to factory settings) when started it takes about an hour or two and hangs up at 9% and will go no further. Left it overnight to no avail.
I bought a new laptop yesterday and today decided to create a system repair disk. I inserted a blank DVD RW and started the process the progress bar went to about 60-70% (estimate, does not give actual progress %) in half an hour and has now been at that exact same point for the last 5 hours. I have had no errors and the window still says "creating disk..." and it still sounds as though the DVD drive is still writing onto the dvd. I Wouldn't think it would take this long to create especially with no progress.
View 2 Replies View RelatedPrevious Windows OS's let me quickly and easily restore to a time that I wanted, however what I'm getting with 7 is "no restore points have been created". Hmmm. I've searched this forum for an explanation that makes sense to me to no avail; not yet ready to admit to stupidity but will acknowledge that I'm past middle age and well into frustration.
I'm in safe mode now; in regular mode my laptop has slowed to the point of only allowing my desktop to appear & I can't get anything else to work. Every time I click on something that infernal little blue donut just keeps running and running.
64 bit Sony. Is it possible to restore to a config that was working 2 days ago?
I have a windows 7 hp touchsmart that is stuck on systrm repair. The compurer was working fine yesterday, but was playing a sims game on it. I forgot to remove it and turned off the computer with it in.
Now, as I titried to turn it on today, it wen straight to system repair. I have used the system restore three times already and it says succesful, but it keeps on foing the same thing over and over again.i have run a few tests and its says everything is fine.
I saw on another thread that I should do a system restore from safe mode on my Acer laptop because when I logged into my computer I couldnt open anything. The system restore was completed (I only restored it to a few days earlier) but when my computer restarted it never allowed me to log on and is stuck on the welcome screen with the little circle thing just turning... I am wondering how long it should take after a system restore for my computer to get to the log in screen. It has been about 8 hours now on the welcome screen. I am started to get a little worried and wondering if I should manually restart my computer by holding down the power button, or will that ruin the system restore or somehow damage my computer?
View 2 Replies View RelatedLast night I closed my laptop without shutting it down. I woke up this morning and turned it on and it went to the system repair screen and ran through that. It says there are problems but they are not automatically repairable. I then tried to do the system restore to an earlier point in time and had one option for a couple days ago. I ran through that but it says there is an error and when I expand to see the error one of the things listed is no OS installed. I have windows 7 64bit. Why it would say I don't have an OS installed but it is running through the system start up repair as well as listing a date that I could restore it back to. I have not tried installing the hard drive into a new computer yet.
View 9 Replies View RelatedOk, so earlier today i decided that i needed to restore my laptop to factory default. As you can see from the title, i use an acer laptop which means i used the acer Erecovery software. All went well at first, although it took a stangely long time at a screen which said "setup is starting." The problem now is, I am now stuck on the acer 'software installation screen!' It is stuck at 41/48 where it is trying to install clear.fi v1.0. I think i heard the sound of an error earlier which worries me as i dont want to force restart my laptop as it clearly says not to do that and doing this caused my hard-drive to break last time
View 4 Replies View RelatedMy computer during system restore was turned off and keeps saying loading files what can I do to reset it to factory I did the f8 and the zero ideas already.
View 2 Replies View RelatedI'm running a Chkdsk/r on my WIndows 7 laptop.The HDD in it has size of about 500 gigabytes, and 400 gigabytes have been used.There's no symptoms of failing recently, but I've got a feeling that it must be checked.So I ran Chkdsk/r about more than 24 hours ago.When it reached stage 4 of 5 at about 36 percent (316831 of 586736 files processed),it seem to be stuck. and It has been the same state for about 30 hours now. But the harddisk is seem to be still active as I can still hear it running. And no, there're no weird voices that came from the harddisk.Is it normal judging by the size of my HDD and the size of its usage ?Should I stop it or let it continue ?P.S. : the chkdsk is running on boot?
View 5 Replies View RelatedI refuse to believe my 500g Sata Hard drive that has over 400gs of file and information, is all now magically a paper weight. No Physical damage has happened to the Drive at all. This is the Issue:Originally Half of the Drive was Encrypted with True Crypt and the other Half was the System Drive((C drive 50g)) and a "general" Drive/ ((175gigs)). The Problem started when some odd way it seems My Encrypted drive become corrupted to the point it would no longer easily mount. It would take 4~5Min's to mount as opposed to the normal 4~5 seconds.What happens when it did mount, The Drive was not working correctly. I couldn't access my files on that drive at all. Not only that, While it seemed like it did Mount the True Crypt Drive, my entire CPU became Non responsive. I couldn't do anything. I was unable to click on anything on the desktop, bring up task manager or even ctrl+alt+del to log off or anything. It was like it was frozen but I was only able to move the mouse...I waited a while((15~20Min's)) and went to restart the CPU by holding the power button.
Now When ever I try to load or boot from that Hard drive...Nothing Happens....It hangs at the "starting Windows" screen. I have windows 7-64bit ultimate. I tried to load from the Win 7 disk, and it hangs at a blank Screen. When I tried to use the repair feature of the Win Xp service pack 2((Remember windows XP *_*??))It hangs at analyzing the Hard drive "47850 asapii at 0 at 0 something something"..When I try to use the advance options of the Windows 7 boot, Safe mode of all types hangs at lading the drivers, Last Known good Configuration hangs at starting windows. Its Like part of the HDD doesn't want to load for anything in the world . And When I have mentioned Hangs I mean it sits there for 1~2 hours and nothing has changed.
I have ideas in my head But I don't even Know if they are possible. Oh Oh..at when I try to Load the HDD by having a back up 40g hard drive be the main booter it STILL hangs at the starting windows screen. I know its sometimes suggested to try it HDD in another CPU but if its not the main Boot Drive is that the same thing? Really don't have any Mobos that have Sata Slots for me to try that out on.I'm praying a simple chkdsk would Solve everything But there's no way I can Issue that Command. My Question(s) are:s there a Way to force the CPU to do a chkdsk command pre boot?Is there a way to have the HDD disabled at start up and enable it during the back up drives desktop((Via check for hardware changes or the "Manage" feature by right clicking computer from the start menu
I started to do a full system recovery on my son's Acer Aspire 5750z, Windows 7 Home Premium 64-bit using the (4) Recovery DVD's we made when we bought it. Everything was working fine through the first three discs. I was called away while the third disc was in use (maybe 10 minutes) and when I got back to the machine, the window was up asking me to remove disc 3 and insert disc 4. I did, and in the 4 hours and 15 minutes since then, nothing has happened. The Acer eRecovery Management (v8.3.2) Window is up. Step 5 "Restore Progres" is highlighted. The elapsed time counter is continuing to run (currently at 5 hours 8 minutes and counting), the "Restoring System" bar is full and shows 100%, and the "Updating System" bar is stuck at 2%, which is where it was when I put in the 4th disc. I am tempted to shut down the laptop and start all over again, but I am afraid that it will mess something up if I do..
View 3 Replies View Relatedmy computer started laggin really bad, couldnt even move mouse without major lag. Anyways so i got sick of it and reinstalled windows 7 64 bit, now my computer gets stuck at loading operating system. Thought it was SSD so took it out and put in a 500gp wd hard drive (I know it works fine, becuase had it run on company server all week before i used it) so then i installed it on their and still was stuck so then i took out my other 500gb wd hard drive where i store all my files, just so i could make sure that my OS can only install on one item and not be corrupted by any other drives. So now the problem still presit and i have tried resetting my bios by taking out battery for 10 min, still no results, so then i ran startup repair (Had no hope) and it still didnt work. Need help and bellow I will post all my hardware, by the way my computer is a custom build and has been working fine for 2-3 months. Also I do overclock, but i doubt that had anything to do with it, because it started to lag weeks after i started overclocking. [code]
View 2 Replies View Relatedmy computer doesn't have 'factory settings'.I'm not all that versed in computers and this is the first one I've build on my own, however, it's beginning to run very slowly and I would like to completely restore it back to it's original form, from when I first built it.I have my windows discs (but i don't have the drivers for my hardware, which I'm assuming I can find online).Is there a way to restore a home build computer? Everything I've read talks about 'factory settings'.
View 4 Replies View Relatedmy computer says windows is starting up, then windows is shutting down.
View 1 Replies View RelatedEarlier this evening I downloaded My Colors and put it on my computer. For some reason it wouldn't load up all the icons and was messing up my browser when I would go online. I did a system restore back to a previous date. Now I am in a huge mess. It will not boot up fully. I get a window with an easy access button in the lower left corner and a shut down button in the lower right corner and that is it. I don't want to do a full restore. I have a Dell Inspiron 1545 laptop. It is running Windows 7. I'm not sure what more information you need or that I can really get to you at this time.
View 4 Replies View Relatedso i dont know what happened to my hard drive but it went blank, so not it real life but i have a very very old computer. Its one of em hp media center pc's from the 2007 or the 2006. my intel thingy is intel platinum 4. my windows is windows 7 and when i launch the system repair disk it does not sense my hard drive and when i dont launch a disk in the computer and i boot it it says "please insert a boot disk or press a key to boot thingy"
View 9 Replies View RelatedI'm writing this from a different computer because I can't even get onto the internet on mine.Pretty much all programs fail to run. When I double-click on the icon, I get the usual spinning "loading" circle and then nothing happens.When I try to open straight from a saved file, I get an error message. For example, whenever I try to open a word doc, I get this error message: "There was a problem sending the command to the program."Symantec Endpoint Protection has been turned off and every time I go to the Action Center to turn it back on, nothing happens. I get the usual message that asks if I want to allow the change and when I click "allow," nothing changes.I've done several system restores, even in Safe Mode, and they have all failed. System repairs have all failed too. Obviously, virus scans are out of the question and Windows Defender (one of the programs that actually will run) keeps telling me that there is no malicious software to be found on my system.
This all started yesterday afternoon. I was running Firefox as usual and had a word document open that I was typing in. I walked away from my laptop and when I came back, there were three pop-ups on the screen from a virus that I had just managed to get rid of several days before. I closed them out and was preparing to run Malwarebytes when my computer shut itself down suddenly. There haven't been any pop-ups or anything that would indicate that this is a virus. However, I tried the same fix that I used to remove the virus the first time (copying the Malwarebyes file 'mbam.exe' to the desktop and naming it as 'mbam.COM' so that it will open) but even that does not work. I've tried the regedit fix that I've found in forums here but that didn't work either.
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies View RelatedI recently did a system restore to factory settings and now my computer is running very slow. I have done all the windows updates and checked for any updates on the drivers. I also defraged it. I noticed that the physical memory is always very high between 85 and 100. The CPU is 10-50.
View 5 Replies View RelatedComputer frozen on restore systems after power outage. I cannot use disc 2 reboot - all keyboard actions frozen. All I want to know is - would I have lost what's on my hard drive and how to be able 2 get it running again.
View 3 Replies View RelatedI am losing my system restore points and my computer is not creating them on its own.
View 5 Replies View RelatedDoes anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View RelatedI have windows 7 Home Premium and I am facing some problems with Hibernate and Standby. The first Problem is that my system doesn't hibernate but instead it just perform a log off. The second problem is that when I put the system in standby, it wakes up automatically after 2 to 3 hours which makes a serious problem if my laptop is in the bag.
View 4 Replies View RelatedAfter a system recovery repair my clock is 2 hours ahead ..I am loath to change as I think windows time is corrupt..I know how to change it..but ...How can I tell..what might would happen to my system file, installs etc..if I adjusted the clock time or region.
View 3 Replies View RelatedI have just purchased a refurbished Dell Inspiron Mini 10 netbook with windows 7 starter. Not sure if the problem I am experiencing is to do with a dodgy netbook or with the operating system. It set up yesterday without any major issues, a bit slow and sticky at browsing but then on powering it up today it started automatically installing updates. Fine I thought, but now some 10 hrs later it has been stuck on update 62 or 62 for the last 5 hours!
I basically can not do anything and have tried rebooting and switching off despite the screen's advise. I have no start menu and none of the keys are responding not even the F range. So am a complete blonde as you may have gathered on such technical matters anyhow. Should I return or is there a simple solution to fixing the matter?? Screen states 'Please do not power off or unplay your machine. Installing update 62 of 62'.
Everything on my system is running like I like it to with the exception of the system clock in windows 7. It got this way when I installed Ubuntu 11.04 on a separate SSD that has to be chosen in BIOS. The Ubuntu clock is correct but every time I switch from Windows to Ubuntu and back again the clock in Windows is exactly six hours fast. I have re-set the clock to the correct time but this happens every time.
View 4 Replies View RelatedI have an Acer Aspire timeline computer I bought 2 years ago. This computer advertised great battery life, internal cooling, and all sorts of other cool things....unfortunately, it was all a lie. But enough about that, As of like 3 days ago, I noticed my computer would respond slowly and take forever to complete a shutdown. I thought nothing of it until I decided to scan it usingSuperAntiSpyware. It came back with 40 tracking cookies, which I deleted. Upon rebooting my computer, I noticed it was still running slowly. So I decided a system restore would be niceI tried the first availible restore date. That apparently failed. Then I tried several others, with no success. I kept getting error codes telling me that the system restore failed to extract the file. It said the disk failiure might have been caused by bad sectors....I have no idea what that means. Ive tried multiple restore dates, they all come back with the same message.
I do not have Norton on my computer ( I read this was part of the problem in many other machines with the same restore error, but just to make it clear, that is not part of the problem with my computer). I can only use my computer in safe mode, because the regular boot mode is wayy too slow and laggy. Also I have plenty space on my computer so it couldnt possibly be slowing down because its getting full or something.
A few days ago, I went to turn on my computer and it just gave me a black screen after the "Starting Windows" screen. I attempted to use System Repair, which failed. It said there was an unspecified error possibly caused by a change in system configuration. I have not changed anything on my computer, for the record, between the last time it worked and now. My husband said it downloaded updates, which would explain why it was off in the first place instead of just being on stand-by. Anyway, I then tried System Restore, which also failed. I can get it to start in Safe Mode with Networking, but it seems that everything I try to run to figure out what the problem is, is saying it can't find the problem. I enabled bootlogging and found this...
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%teredo.displayname%;Microsoft Teredo Tunneling Adapter
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @netavpna.inf,%mp-agilevpn-dispname%;WAN Miniport (IKEv2)
[code]....
I have intel core 2 duo E6400 2.13ghz......and i bought it 5 years ago so i wanted to know can i use it for 12 hours consecutively or will it harm my computer.....or should i use it for 10 hour and give it a 2 hour rest and the use it for next 6 hours?
View 9 Replies View Relatedmy desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies View Related