I saw on another thread that I should do a system restore from safe mode on my Acer laptop because when I logged into my computer I couldnt open anything. The system restore was completed (I only restored it to a few days earlier) but when my computer restarted it never allowed me to log on and is stuck on the welcome screen with the little circle thing just turning... I am wondering how long it should take after a system restore for my computer to get to the log in screen. It has been about 8 hours now on the welcome screen. I am started to get a little worried and wondering if I should manually restart my computer by holding down the power button, or will that ruin the system restore or somehow damage my computer?
I have a windows 7 hp touchsmart that is stuck on systrm repair. The compurer was working fine yesterday, but was playing a sims game on it. I forgot to remove it and turned off the computer with it in.
Now, as I titried to turn it on today, it wen straight to system repair. I have used the system restore three times already and it says succesful, but it keeps on foing the same thing over and over again.i have run a few tests and its says everything is fine.
My computer has been stuck at "please wait while your windows files and settings are being restored System restore is restoring the registry" for almost 24 hours. I have a Toshiba with Windows 7 home premium 64bit .
Last night I closed my laptop without shutting it down. I woke up this morning and turned it on and it went to the system repair screen and ran through that. It says there are problems but they are not automatically repairable. I then tried to do the system restore to an earlier point in time and had one option for a couple days ago. I ran through that but it says there is an error and when I expand to see the error one of the things listed is no OS installed. I have windows 7 64bit. Why it would say I don't have an OS installed but it is running through the system start up repair as well as listing a date that I could restore it back to. I have not tried installing the hard drive into a new computer yet.
Ok, so earlier today i decided that i needed to restore my laptop to factory default. As you can see from the title, i use an acer laptop which means i used the acer Erecovery software. All went well at first, although it took a stangely long time at a screen which said "setup is starting." The problem now is, I am now stuck on the acer 'software installation screen!' It is stuck at 41/48 where it is trying to install clear.fi v1.0. I think i heard the sound of an error earlier which worries me as i dont want to force restart my laptop as it clearly says not to do that and doing this caused my hard-drive to break last time
My computer during system restore was turned off and keeps saying loading files what can I do to reset it to factory I did the f8 and the zero ideas already.
I'm trying to fix my mom's Lenovo B570. I did a disk cleanup, defrag, and ran a full anti-malware scan. After cleaning off 122 malware items, I restarted the laptop for it to take affect. After entering her password, it's stuck on the welcome screen. Even my dad, who's been in IT for 30 years, can't help me. I've done a forced shut down, but that didn't work and I can't bring up the task manager.
I started to do a full system recovery on my son's Acer Aspire 5750z, Windows 7 Home Premium 64-bit using the (4) Recovery DVD's we made when we bought it. Everything was working fine through the first three discs. I was called away while the third disc was in use (maybe 10 minutes) and when I got back to the machine, the window was up asking me to remove disc 3 and insert disc 4. I did, and in the 4 hours and 15 minutes since then, nothing has happened. The Acer eRecovery Management (v8.3.2) Window is up. Step 5 "Restore Progres" is highlighted. The elapsed time counter is continuing to run (currently at 5 hours 8 minutes and counting), the "Restoring System" bar is full and shows 100%, and the "Updating System" bar is stuck at 2%, which is where it was when I put in the 4th disc. I am tempted to shut down the laptop and start all over again, but I am afraid that it will mess something up if I do..
Yesterday my laptop froze, i could do nothing. I reset the laptop, and upon restart it took long for everything to load, and then froze again, then i tried system restore in safe mode but just got blanc screens, also managed to open system restore on normal login but aslo still blanc screen, then i opened task manager, complete blanc screen everywhere, msconfig the same. As soon as i open browser the pc freezes, it has also given me bkue screen from time to time
Just since yesterday my laptop was attacked by some kind of malware that tries to scare me into buying their products and hiding all my files. I managed to unhide all my files but somehow the virus still remains. I tried every solution on the web to get rid of this virus but to no avail **** does not work at all.And to top it all this particular virus shuts down all my usb ports and disabling me to connect to another computer to share files even. So I decided to reformat my laptop. But the thing is when after I clicked system restore, the thing shut down. Ok fine everything was normal and it started up as usual, but the next thing that happened was that it was stuck on a black screen. I thought the program was processing but I was wrong ( I've never reformatted a computer so please bare with my sillyness ) I've tried many many times by shutting down and trying to click on system restore but still same result, stuck on a black screen. And pressing F11 doesn't really help either, it will still result in a black screen. I've tried to use the system recovery disc but it didn't work at all.
I have Windows 7. Earlier, my computer was acting funny after trying to open some videos from my camera that I had connected. I retarted hoping it would act normal. I got the opposite. Every time I try to start up, it goes to a black screen after I put in my password. I will not let me open task manager or anything. I see a cursor that I can move around, but just a black screen. I've tried to google the problem (I am currently in safe mode) and tons of people said to do a system restore. Problem is, it says I haven't created any restore points and to open up system protection.
Here lies ANOTHER problem in my awesome string of luck. When I click on it, the system protection tab is not there. It's completely missing. I tried going to start, right clicking computer and going to properties. Guess what? It's not there either like it should be.
At first it started with me downloading Cataclyst Control Center to update my graphics card wich is a X-fire ATI 5000 series. There apeared a black border around my screen of around 1 inch, but wherever I chekked the resolution showed it was my native 1920x1080, while still showing the black border.I tried de-installing CCC at that point but it didn't work, I also tried a system restore, but that didn't work either. I formatted my pc to factory defaults at that point.After a month I started using the pc again, and when playing Battlefield 3 I got an error that my graphocs card was failing or something. So this time I went to the device manager and tired updating it there, but it automaticly installed CCC again and my resolution got screwed again.I found a solution from: [Solved] 4870 not displaying 1920x1080 on Acer H233H - ATI - Graphic-Displays."I just went through this myself with an Acer P235H. The problem has nothing to do with Acer, and everything to do with ATI. You see, ATI assumes that you'll use your HDMI cable to hook up to a TV. Since most TVs are configured with overscan (i.e. the edges of the broadcasted image don't appear), ATI aggressively defaults to shrinking the image by 15% when using HDMI to ensure that the entire desktop will be visible.
The solution is to install the ATI Catalyst Control Center, available from their website. There's a section called something like "desktops & displays." On the bottom of that tab will be an area with a small icon of a monitor. Right click on that and select "Configure..." One of the tabs that shows up has a slider for display scaling. Move the slider to 0%, and voila! It was for my wife's computer. I had already promised to reduce the cable clutter by having a single thin cable for both audio and video, so not getting HDMI working would have entailed a serious loss of face."So I tried looking in the CCC, but found no such option, and then went to the website to update CCC. I got the latest version, and again found no such option. I chose to do a system restore and never again try to update my drivers for the sake of having a normal screen.When the restore was finished it automaticly restarted my pc, and I got to the password screen (with normal resolution now) and typed in my password, after that I got a blackish screen with only my mouse on it, wich I could still move.I restared my pc again then and this time I didnt even get to the password screen, it just straight out went to the blackish screen with my mouse on it after the welcome screen.
I have Windows 7. Earlier, my computer was acting funny after trying to open some videos from my camera that I had connected. I retarted hoping it would act normal. I got the opposite. Every time I try to start up, it goes to a black screen after I put in my password. I will not let me open task manager or anything. I see a cursor that I can move around, but just a black screen. I've tried to google the problem (I am currently in safe mode) and tons of people said to do a system restore. Problem is, it says I haven't created any restore points and to open up system protection. Here lies ANOTHER problem in my awesome string of luck. When I click on it, the system protection tab is not there. It's completely missing. I tried going to start, right clicking computer and going to properties.
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
When I start my laptop, it shows the HP logo, begins to boot and is almost instantly interrupted by a white screen that scrolls down from the top. It reboots right after the white screen.I am able at the HP logo screen able to navigate to System Restore and that is where I run into my next problem.When the System Restore window opens for confirmation it shows that "Local Disk (C) (System)" status: "Ready to restore" and the check-box next to it is checked.The next line has a empty check-box for "Local Disk (C)" with the status: "The drive cannot be found." I can also successfully boot into Safe Mode with Networking. I can access all my files. Which leads me to believe that it is a hardware problem. Possibly the motherboard or graphics card.
Yesterday morning I started my laptop and it was frozen at the Acer screen. After I restarted a few times I called acer tech support. Via remote access the tech support agent was able to see that, even though I have McAfee installed, my computer had trojans and a lot of files had been affected. He told me he could fix it but it would cost $200 which I can't afford right now. So I ordered the windows 7 reinstall disc and hung up. I decided to try doing a system resore back to factory settings. I began the restore and had no problems. Then when the computer went to automaticaly restart it continued to remain stuck on the acer load screen but I found that if I left it alone for about 45 minutes it would automatically restart and continue with the restore process, adding files and whatnot. My newest problem is that the restore is stuck. It started loading Office 2010 and has been doing it for 12 hours now.
My Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
I lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
I recently installed some updates in my Proline notebook, but after installing the 30 percent, it failed to restart, with the screen showing nothing (as if it's off). I then tried to restore it to an earlier time via safe mode but the restore point available is only the one as at the time of the update. I tried to create a restore point, but when i tried, i cannot even find system protection when i looked for it and it directs me to system properties where my computer's description is blank and it cannot be edited.Even the updates cannot be uninstalled via safe mode.Is there no other options i can try in order to start my laptop normally again?
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
System restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
my Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
I now have another issue with my pretty new laptop. Windows won't start up. Well it starts up but when I get to the password screen and type that in my laptop just gets stuck on the welcome screen. I don't know what to do fix it. This all started last night when I accidentally pulled the power cord out of the wall and the CPU shut down. The battery pack wasn't in( didn't wanna bust my battery)
