Blank Screen After An Update, Cannot Restore Back Or Create Restore Point
Dec 7, 2012
I recently installed some updates in my Proline notebook, but after installing the 30 percent, it failed to restart, with the screen showing nothing (as if it's off). I then tried to restore it to an earlier time via safe mode but the restore point available is only the one as at the time of the update. I tried to create a restore point, but when i tried, i cannot even find system protection when i looked for it and it directs me to system properties where my computer's description is blank and it cannot be edited.Even the updates cannot be uninstalled via safe mode.Is there no other options i can try in order to start my laptop normally again?
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
I want to restore my computer to May 31, 2012 11.am so I type this in and I'm told the restore point has been created successfully. However, when it finishes I see that the computer will be restored.
can we write a windows 7 system restore point in a dvd or cd coz some virus delete the system restore point in windows 7 therefor using this cd /dvd can we restore the system can't we but c drive System Protection is on?
I just came upon a very strange problem with my computer today. I started it as usual, ran a TuneUp Utilities check (as I usually do) and, in the meantime, was prompted by my iTunes installer to install a new version of iTunes. I clicked OK on the install thing, then all of a sudden I get this message from the HP Support Assistant: Windows System Restore is not activated. So I go to the System Protection folder to try to manually enable it, but I get an error message that says an unexpected error occurred: System restore has found an error, try to run System restore again. I do this a thousand times, and the same message pops up.
So I run my Norton antivirus and SpyBot Search and Destroy. The Norton search comes up empty, but the SpyBot returns this: Babylon Toolbar and Win32.Downloader.bltu. So I click to fix the problems and an error message pops up in SpyBot saying I'm not running it as admin, so the problems can't be fixed. Well, my user account is an admin account (the only one I have in this computer), so there's obviously something very wrong here, for it seems like whatever this is, it's keeping me from executing whatever task may remove it. I also execute sfc /scannow from a command prompt and the returning message is that I cannot run sfc /scannow because I'm not an administrator.
I want my system to automatically create a restore point before installing any program/software in it? How can set this up on my windows 7 64 bit laptop?
I currently can't make a system image or restore point. The error I receive for the system image attempt is: The backup failed. Windows Backup timed-out before the shared protection point was created. (0x80780021)
My problem is that installing software or running Windows Update takes loads of time (6 minutes longer than usual) while the system otherwise appears to run quickly. Running Win7x64 and Security Essentials.
Upon troubleshooting, I found that my computer cannot make System Restore Points, and it apparently tries to do so for 6 minutes. I deleted all restore points, expanded the space to 100%, and turned off and on system restore, without any success - I cannot create a restore point. My VSS service seems to be running just fine. The specific error is EID: 8193, and the text is: Failed to create restore point (Process = C:Windowssystem32 undll32.exe /d srrstr.dll,ExecuteScheduledSPPCreation; Description = Scheduled Checkpoint; Error = 0x81000101).
I wouldn't go so far to say, I'm totally computer illiterate, but not far from it.. If there's anyone out there, who's up for a challenge I'm running windows 7. I am the administrator. Someone I don't trust at all, used my PC a while back. After he (did whatever he did) I noticed I couldn't access several files. I get a "access denied" or you don't have permission to view this file, owner info etc.. I can see a lot of the files, but their either empty now or I can't view them. I have used restore many times in the past, but now I get a message " no restore points".. I don't know what he did, or if he did anything.. It could be one of my kids changed properties by mistake, before I wised up and created a basic user acct w/ limited access for them.. I almost forgot. When I go into file properties there is a red x by my user name (administrator) Not in every property, but several.. Sometimes there is a red x by other user names, as well, but mostly mine.
I have had this problem for quite a while. I'm able to create restore points (and they show up in the list), but I'm unable to 'restore' them... I get the system cannot restore error. I have Norton-Comcast and have deactivated 'tamper protection' with no luck.
I dont know what happened to me suddenly my antivirus AVG 2012 detect an intruder on the web browser and remove the browser morzila and after that I have no restore point but i dont know what happens and I feel that my PC has something strange how I can solve this problem?
On this recent windows update, 2/14/13, my computer froze on the "Preparing to configure windows" screen for several hours. I rebooted normally and the screen went to "configuring updates" and stuck at 67% for about an hour. I got frustrated with it and rebooted to safe mode to see if I could do a system restore and when I did it said there was no restore point back up! So I rebooted normally and now it is still just sitting on the "Preparing to Configure Windows" screen with the circle spinning. I am using Windows 7 Ultimate on a Dell Dimension 2400.
I receive "The restore point selected was damaged or deleted during the restore" after I try system restore. I have already tried different restore points and have Run SFC /SCANNOW but to no avail. Did a start up repair too but no problems were detected.
I am having a problem with my system. Windows will not reboot for me and I have booted from the windows 7 cd, ran the repair option but the system restore points have vanished. I have tried doing a repair install but with no restore points what do I? I have way too much data stored on this laptop that I can not afford to lose.
Do you guys know of a way to save a restore point and locking it that no matter what, it won't delete? I made a restore point and then installed Windows 7 service pack 1. The service pack screwed me so bad with software and hardware I used, I regret that I didn't do an acronis backup!When trying to fix the problems, I had reinstalled various drivers and uninstalled the Service pack, thus forcing Windows to create more automated restore points. Since my C drive is configured to use %30 of it's capacity for restore points, along the way, I guess my restore point was deleted because it's not in the restore points list, even if I check "show more restore points".I want to prevent this in the future so I am asking if if anyone knows how to create a restore point and LOCK it so no matter what, my restore point won't get deleted.
I created a restore point but fatfingered the description and it's bugging me. I want to rename it (the text in the "description" column of the restore point). I know restore points are in the System Volume folder and I deprotected the one for the C: volume to the extent.
I could and tried to recursively grep it in an administrator shell but many files were still "permission denied". Anyone know the exact files where the descriptions of the restore points are located? (I searched the registry without luck, so I assume they're in that directory with the actual data from the restore point.)
i want to exclude the restore point files from defragmentation (Defraggler has that option). Where are the restore points stored? I found a tool to make hidden files visible. There is some information on Google where XP stores the files, but it seems to be different in Windows 7.My reason for excluding that from defragging (and excluding my download and temp folders) is to speed up defragmentation. Those files ae in flux anyway and fast access is not needed.BTW: how can I add a picture to my name in this forum??? I didn't find it in my account
is virus will still exist in a affected files after doing a restore point in the day that the virus affect the file? hmm is doing a restore point is a effective way to avoid virus? now im experiencing a virus that cannot detect by anti-virus, i know that is a virus but every time i scan it with bit defender ,it scans that there's no treat found file that file name is sexy.jpg , xxx.mp4 and autorun (for sure its a virus) its came from flash drive of my cousin i try to scan it but the result was no treat found.when i try to open .jpg files all of my .txt files and installer files was collapse but there memory consume still exist i also try to show hidden files but no hidden in the flash drive.im not thinking of the files now but more i think of what if it affects my files without any notice.
I set a restore point 2 days ago manually. Today I have found it has been deleted and I may have to reformat because of this.I set my drive to hold 1.15gb in size for restore points. The current restore point is a mere 200mb yet it STILL decided to delete the old ones. Previously I've checked only to find 0 restore points despite the settings being adequate.It seems restore points simply don't work on my OS. They show up for a handful of hours and are automatically deleted (even the manually made ones).
I run win7 home on an asus with intel i7920 with 9 gig ram and nvidia gtx260. The problem I've encountered is that I am unable to restore to any previous restore point. After going through the motions, I get a message that the restore failed due to an "unspecified error occurence at 0X80071a90. It doesn't matter what earlier restore point I choose.
