Chkdsk/r Has Been Stuck For More Than 24 Hours At Stage 4

Jan 15, 2013

I'm running a Chkdsk/r on my WIndows 7 laptop.The HDD in it has size of about 500 gigabytes, and 400 gigabytes have been used.There's no symptoms of failing recently, but I've got a feeling that it must be checked.So I ran Chkdsk/r about more than 24 hours ago.When it reached stage 4 of 5 at about 36 percent (316831 of 586736 files processed),it seem to be stuck. and It has been the same state for about 30 hours now. But the harddisk is seem to be still active as I can still hear it running. And no, there're no weird voices that came from the harddisk.Is it normal judging by the size of my HDD and the size of its usage ?Should I stop it or let it continue ?P.S. : the chkdsk is running on boot?

View 5 Replies


ADVERTISEMENT

Configuring Windows Updates And It Has Been 7 Hours And It Is Still On Stage 1 / 30%?

Oct 16, 2011

I am configuring Windows updates and it has been 7 hours and it is still on stage 1 30%,

View 4 Replies View Related

CHKDSK 2% Complete After 18 Hours?

Jun 9, 2012

My problem was that startup repair wasn't workiing and was in loop, i tried everything and didnt know what to do, anyways i was bored so i kept trying the infinite loop tutorial several times only to see I/o errors..... I kept trying one got through so i closed the cmd and reatarted the laptop only to find the CHKDSK waiting, i thought this was good but it has taken 18 hours to get to 2% complete and its only in stage 1

View 5 Replies View Related

System Recovery Stuck At 9% For Hours?

Jan 24, 2012

I am having trouble with a friends computer... his computer was becoming unresponsive with up to an hour start up times before he was able to use it. We tried to run anti-virus software but wouldn't complete any scans.

We decided to go ahead and save all the files he needed and do a complete system recovery f11 (format hard drives back to factory settings) when started it takes about an hour or two and hangs up at 9% and will go no further. Left it overnight to no avail.

View 4 Replies View Related

Computer Stuck On System Restore For 24 Hours

Dec 8, 2012

My computer has been stuck at "please wait while your windows files and settings are being restored System restore is restoring the registry" for almost 24 hours. I have a Toshiba with Windows 7 home premium 64bit .

View 1 Replies View Related

Not Sure If CHKDSK Stuck Or Should Wait It Out

Feb 22, 2012

my computer was not booting up so last night I went to the built in startup repair in Windows 7 and through the command prompt did a "chkdsk c: /f /b" which I saw online. It took about 15 hrs to get where it is at now which it finished the stage 5 and now says "Free space verification is complete." I thought that meant it finished but im assuming not because it won't let me type in the CMD box. Its been at this point for about 2 hours now and im wondering if I should try to shut down and boot up my computer or wait out until it does more. Also during stage 4 it said a couple times that windows repaired bad clusters?

View 1 Replies View Related

HDD No Longer Booting-Hangs For Over 2 Hours-Stuck On Starting Windows 7?

Dec 31, 2010

I refuse to believe my 500g Sata Hard drive that has over 400gs of file and information, is all now magically a paper weight. No Physical damage has happened to the Drive at all. This is the Issue:Originally Half of the Drive was Encrypted with True Crypt and the other Half was the System Drive((C drive 50g)) and a "general" Drive/ ((175gigs)). The Problem started when some odd way it seems My Encrypted drive become corrupted to the point it would no longer easily mount. It would take 4~5Min's to mount as opposed to the normal 4~5 seconds.What happens when it did mount, The Drive was not working correctly. I couldn't access my files on that drive at all. Not only that, While it seemed like it did Mount the True Crypt Drive, my entire CPU became Non responsive. I couldn't do anything. I was unable to click on anything on the desktop, bring up task manager or even ctrl+alt+del to log off or anything. It was like it was frozen but I was only able to move the mouse...I waited a while((15~20Min's)) and went to restart the CPU by holding the power button.

Now When ever I try to load or boot from that Hard drive...Nothing Happens....It hangs at the "starting Windows" screen. I have windows 7-64bit ultimate. I tried to load from the Win 7 disk, and it hangs at a blank Screen. When I tried to use the repair feature of the Win Xp service pack 2((Remember windows XP *_*??))It hangs at analyzing the Hard drive "47850 asapii at 0 at 0 something something"..When I try to use the advance options of the Windows 7 boot, Safe mode of all types hangs at lading the drivers, Last Known good Configuration hangs at starting windows. Its Like part of the HDD doesn't want to load for anything in the world . And When I have mentioned Hangs I mean it sits there for 1~2 hours and nothing has changed.

I have ideas in my head But I don't even Know if they are possible. Oh Oh..at when I try to Load the HDD by having a back up 40g hard drive be the main booter it STILL hangs at the starting windows screen. I know its sometimes suggested to try it HDD in another CPU but if its not the main Boot Drive is that the same thing? Really don't have any Mobos that have Sata Slots for me to try that out on.I'm praying a simple chkdsk would Solve everything But there's no way I can Issue that Command. My Question(s) are:s there a Way to force the CPU to do a chkdsk command pre boot?Is there a way to have the HDD disabled at start up and enable it during the back up drives desktop((Via check for hardware changes or the "Manage" feature by right clicking computer from the start menu

View 5 Replies View Related

Windows 7 Breaks Then Hangs / Now Stuck On CHKDSK

Jan 5, 2011

when I registered and put all the information about my computer in you all can see that which should save me some time. I've been running my Windows 7 x64 machine for about 3 weeks without problem. All of my programs are installed on the SSD and the HDD is for data files. Simple. Easy.I run dual display with no problem, 1920x1080 on the 24" LED (DVI), and extended to a 19" LCD (VGA).My dad was kind enough to buy me a 32" 1080p Insignia TV for christmas. I bought a cheap HDMI cable online, and when it came in the mail i decided I would set my computer up to have 3 monitors. (I didn't know that my graphics card only supports 2 at a time, I know this now.)So I plugged in the HDMI Cable to the TV and to the Computer. The 24" LED screen (my main one) Twitches for a moment then returns to normal, the TV comes on, and the 19" LCD goes blank. All is good except Aero magically shut off. After fiddling with the display settings and realizing i can only have two monitors at a time. I decide on the 24" and the 32" for now, but leave all three plugged in. I restart the computer in hopes of returning Aero. THe computer takes a VERY long time to start up and when it does, i'm presented with a dialog telling me that a page file has been created for me.
My page file SHOULD have been on my HDD (to keep room on my SSD, with 8GB of RAM i didnt think page file was THAT important).

I click the dialog and the page file settings open up. i go to check and make sure they are correct, but when i select the HDD from the listbox, everything stops working right. Page file dialogs go not responding. I open task manager and all looks good in processes. Start bar won't open. It looks like the computer is thrashing, but it never gets around to catching up with itself, so i shut it off and try again with the same results.Then i unplug everything but the DVI monitor, the mouse and the keyboard, and try again... same results. Tried safe mode... same results.so i shut it off and let it be for a day (i was pretty frustrated)I come back today, turn it on and it hangs forever on the 'Starting Windows' boot screen.I shut it off and figure.. I didnt have that much on there, I might as well wipe the drive and start from scratch, thats the easiest solution, so i pop in the Windows 7 x64 DVD, reboot the machine, all looks good, and i go for install, and it Hangs forever on the 'Setup is starting' screen with a spinning wheel cursor.One more time i restarted the computer without the disc booted 'normally' and it hung on the 'Starting Windows' screen for a little while, then entered CHKDSK. I let that run, and for the last 20 minutes, it's been sitting saying 'CHKDSK is verifying Usn Journal...'

View 4 Replies View Related

CHKDSK - Windows Stuck In Loop When Booting

Jan 25, 2012

When I tried to boot Windows 7 yesterday, I got a prompt saying that a disk check had been scheduled. I initially thought this got stuck because it seemed to freeze on 10% and the numbers alongside that figure didn't go up. I rebooted my computer and let it start again, after a few hours(!) the disk check finished and started on another of my drives. Again, I let this complete and it eventually rebooted itself. Upon rebooting it however, it did the exact same thing and appears to be in a loop just doing the disk check over and over.

I Googled this and opened the command prompt and checked all my drives (it disk checked f and c) but none are marked as dirty. I ran the command to stop the disk check on all drives anyway but still the problem persists.

Right at the start it says I can cancel the check by pressing any key on the keyboard but for some reason, it doesn't work - not sure if it's not recognising the keyboard or not.

I've also tried to boot into safe mode to see if that bypasses it but that hangs at classpnp.sys so that's a no go right now as well. I tried renaming the file to classpnp.old as a forum suggested but it blue screens and restarts if I do that. I'm currently trying a linux boot cd to replace to file to see if that works.

View 7 Replies View Related

Creating System Repair Disk - Process Stuck At Same Point For Last 5 Hours

Dec 6, 2011

I bought a new laptop yesterday and today decided to create a system repair disk. I inserted a blank DVD RW and started the process the progress bar went to about 60-70% (estimate, does not give actual progress %) in half an hour and has now been at that exact same point for the last 5 hours. I have had no errors and the window still says "creating disk..." and it still sounds as though the DVD drive is still writing onto the dvd. I Wouldn't think it would take this long to create especially with no progress.

View 2 Replies View Related

GRUB Loading Stage 1.5 Error 17?

Oct 29, 2011

I had Backtrack and Windows 7 in separate partitions, i just deleted the partion of Backtrack in Windows 7 using diskmgmt. When i restarted the computer it is showing GRUB loading stage 1.5 error 17

View 3 Replies View Related

Win7 Freezes After First Stage Of Installing

Oct 20, 2009

I'm trying to install Windows 7 32bit on one of my drives via Vista, I click install on the DVD and click the drive. It does the first stage of installing and expanding files (whatever that is!). Then it restarts.. upon restart it boots onto Windows Setup and I get the logo which glows for a while then freezes.

I've looked this up and i've removed ram so I just have 1stick of 1gig and i've unplugged various USB items except my keyboard and mouse and still get the issue.

Any ideas?

View 4 Replies View Related

Windows 7 Upgrade From Vista Fails At 2nd Stage

Mar 6, 2010

I purchased the Win 7 upgrade (Home Premium). I'm running Vista (64 bit) on my 2 years old HP laptop.I have opted for the custom install to clean up. I've saved all the docs/pics/mp3 etc and I have the programs I need to reinstall. I've uninstalled my anti-virus (AVG) as it seemed reluctant to turn off.I then ran the installation from the cd (64 bit). When I reached the second stage of Expanding Windows Files it throws up the following "Windows could not prepare the computer to boot into the next phase of installation. To install windows, restart the installation".I've tried this 3 times and same thing happens at 20% of the same stage every time.I think I need to post an error log but I searched for and could not find what I needed.

View 3 Replies View Related

Screen Goes Black (PC Does NOT Hang) After First Stage Of Installation

Apr 6, 2010

My problem is that during Windows 7 Ultimate installation (right after the first reboot) the screen goes black! The monitor does not loose the signal because I can still see the green solid LED on it. I have run into this issue four times with four different PCs with four different configurations. The only common denominator here is the type of video card (I say the type of video card because this has happened with different brands and models of video cards). This has happened only with video cards that have DVI, S-Video and VGA ports, but only on the ones that have the VGA port that PLUGS through a little ribbon cable to the card it self. I have successfully installed Windows 7 on systems that have video cards with the same ports but the VGA port is solder to the card. It seems that after the first reboot and after it displays "Starting Windows", Windows thinks that the active port on the video card is the DVI port and NOT the VGA port that has been using up until that point! I know this because I have used a DVI to VGA adapter right after the screen goes black and there it is! the setup process waiting for my input (create a user)...

View 5 Replies View Related

Windows 7 32&64 Bit Won't Pass First Stage Of Completing Installation?

Jun 5, 2011

Windows 7 32&64bit wont pass first stage of Completing Installation due to "VGA DRIVER" After many weeks of trying to fix my mistake

[code]...

Well first off the computer was running Windows xp64 pro and I performed clean install of windows 7 64BIT, Everything was working great and installed all updates up to sp1. Then I got a "twitch" in my brain and deciced to update my bios which I have never done nor even really used bios before and even better I updated when I was using windows 7. I was nable to open safari and I think other things were glitching out but cant remember. So of ourse now I know that my bios settings changed with the update and I attempted to reset and oll back and now have the old bios reinstalled and have tried many different settings with no change in installation. So I thought maby another clean install will fix my mistakes.and now after many many attempts to install both 32 AND 64BIT Windows 7 I found that using Shift f10 and going to device manager I can see that only the VGA DRIVER has a question mark and there is not a display drivers folder. I have tried onboard with no card installed with same results. I have also tried 3 different video cards and even ownloaded the driver for them for windows 7 64 and 32 from microsoft update catalog and it will say it can not be installed at the load driver option during windows 7 install, it will find the driver and put it on the list so it knows what Im trying to install just wont install it.(like it doesn't recognize the hardware)So im going crazy because I know windows 7 will run on this maching I just dont know what to do to make it work again other then find a working vga driver or video card that will install its drivers during the install from the windows 7 disc.I have tried:2 different hd both formated with windows 7 disc from cmd prompt disabled everything in bios I am not needing for installinstalling from usb with nothing attached to motherboard except a video card because I dont think onboard is compatable.Have tried to install in safe mode tried to disable vga during completing installation tried disabling usb after first restart and removed usb.I have tried installing in a different computer then puting hd back in and repair says it can not repair.Well im stuck believing I need to have a working VGA driver for installation to complete or it is not recognizing my card to know to install the driver.I have two VGA cards to try.Geforce 8500GT Geforce 7300LE Also my ethernet driver will not install ither so I dont have internet when using shift f10 to attempt installing driver over internet. I have been keeping it disables to prevent a problem there also.

View 9 Replies View Related

Device Stage - Devices And Printers Blank

May 15, 2009

Really weird, when selecting Devices and Printers (Device Stage) in the menu the progress bar would take forever and never display anything - just blank.

Finally discovered it was actually a bluetooth issue in services. I don't even know why I looked there - -

THE FIX at least for me..

Click Start button, type "services" into the search program and files box. This brings up a list in the menu, select Services. This should open a list of local services on your system.., Find 'Bluetooth Service" and make sure it has started, right click and set to 'automatic' (mine was already set), Select "Bluetooth Support Service" and start, set to automatic (mine was set on manual) --

This fixed my issue, hopefully yours as well..

View 2 Replies View Related

Sony VAIO BSOD At Windows Password Stage

May 1, 2012

My daughter's Sony VAIO PCG-71911M running windows 7 is suffering from the BSOD within seconds of entering her windows password. The blue screen is all gibberish to me but Bad_Pool_Header appears as the error at the top of the screen on most occassions.

I am able to boot using Safe Mode and Networking and the laptop appears to be very stable when this option is selected.

Through Safe Mode I have attempted system restores which allow me to get past the windows password stage on a normal boot. But I then get error messages and network connectivity is unavailable when i then reboot I end up with the BSOD issue again.

View 8 Replies View Related

Microsoft LifeCam Studio Webcam - No Device Stage

Apr 10, 2012

Device Stage was working in Windows 7 Professional 64-bit, after I formatted my hard drive it installed correctly but there is no device stage for the webcam. There is a default webcam icon and it is using the generic drivers. I have updated the firmware and installed the latest version of Lifecam and drivers, but still nothing has changed. Done all the windows updates and changed the device installation settings. How do get device stage to work again?

View 2 Replies View Related

Winodws 7 Hang At Completing Installation 2nd Stage - Cdrom Has Bad Block

May 1, 2012

I am stuck at the completing installation stage after reboot. Heres what I've tried:

Removing all but 1 stick of ram
Only have the HDD im installing to plugged in
Using the mobo vga with video card undone
Have all USB devices unplugged ( except keyboard )
Disabling everything in "Other" in device manager
Disabled display driver in device manager

I received this error in the event log: Cd rom has bad block under the administrative tab

ASUS Sabertooth Z77
Intel Sandy Bridge i5-2500k
GSkill 8gig Ares series

View 6 Replies View Related

"Configuring Stage 3 Of 3 - 0% Complete"

Nov 11, 2011

Working on friends system. Dell Inspiron 530 with Windows 7 Home Premium. Working fine until 3 updates automatically installed. When the system boots up it eventually gets to a window screen that says: "Configuring stage 3 of 3 - 0% complete". Shows working icon for about 30 - 40 seconds then reboots. This goes on and on for hours. I can get to the system diagnostic screen to do a system restore, but it says that there are no restore points. Start up repair also does no good.As a side note, when given the option to "start with command prompt", it will not work either?

View 1 Replies View Related

BSOD Every Few Hours?

Sep 3, 2012

Every few hours I'm running into an error and I can't seem to figure out where its stemming from.

View 1 Replies View Related

Pc Is Crashing After 2 Hours

Sep 28, 2012

my pc is crashing every 2-3 hours...ive run spy bot for worms ,microsoft essentials can't update,and i can,t log in facebook,gmail,ymail,Internet because of another error that i will upload with the zip file that sf diagnostic tool took.

View 1 Replies View Related

Shutting Down For Hours?

Apr 19, 2012

my PC recently started to get stuck shutting down and I have to use the reset botton a couple of times and then it shuts down normally.I recover it from a early date and it work OK for a couple of days but it is back doing the samething again.

View 2 Replies View Related

Use Computer For More Than 12 Hours?

Jun 20, 2012

I have intel core 2 duo E6400 2.13ghz......and i bought it 5 years ago so i wanted to know can i use it for 12 hours consecutively or will it harm my computer.....or should i use it for 10 hour and give it a 2 hour rest and the use it for next 6 hours?

View 9 Replies View Related

PC Slowing To Stop After A Few Hours Use?

Jan 7, 2012

I have a Lenovo G560, about 8 months old. Lately, after about 2 hours use, it begins to get slower and slower until in the end it freezes.I have de fragged, run virus scans and done a registry cleaner etc, but it make no difference. It does not appear to be getting over heated as the fan kicks in and out, not permanently running.

View 15 Replies View Related

How Many Hours Has A Hard Drive Run

Feb 14, 2012

I have two older hard drives, both 120G. I want to put one in a friend's computer who is running out of space with his old 40G.I bought both 120G at the same time and put one in my laptop and used the other as a USB backup. Sooo, the laptop one has 5 years use on it, maybe 25,000-hours, the other maybe 50 hours.Given the drives are both S.M.A.R.T. technology, it has occurred that I might be able check the hours and give my friend the 50-hour one and keep the other for back ups.

View 2 Replies View Related

HP Dv6 Laptop Shutting Down After 12-14 Hours?

Jan 11, 2012

I have a new HP dv6 laptop. The operating system is windows 7, 64 bit. I've had it less than a week. The power option I have set on it (default) calls for the system to go into the sleep mode after 20 minutes(closing the lid). I don't even see any option available to select that would shut the computer down after a certain time. The problem is, after having not used the laptop for approx. 12-14 hours, when I am ready to use it again, it has shut itself down. I don't know why it doesn't stay in the sleep mode.Any ideas why the laptop is shutting down? It's not overheating because I keep it in a cool room and the air flow around it is not restricted.

View 2 Replies View Related

Start Up Taking 8 Hours?

Jan 31, 2012

My Windows 7 hung itsself up this morning. I had to use the power button to restart. I chose Safe Mode. I now have the screen:

Start up repair. Start up repair is checking your system for problems Attemping Might take an hour

That was 8 hours ago and it is still running. I pressed the Cance button and got the answer "Cannot cancel"

View 1 Replies View Related

How To Restore Computer To 48 Hours Ago?

Feb 14, 2012

Previous Windows OS's let me quickly and easily restore to a time that I wanted, however what I'm getting with 7 is "no restore points have been created". Hmmm. I've searched this forum for an explanation that makes sense to me to no avail; not yet ready to admit to stupidity but will acknowledge that I'm past middle age and well into frustration.

I'm in safe mode now; in regular mode my laptop has slowed to the point of only allowing my desktop to appear & I can't get anything else to work. Every time I click on something that infernal little blue donut just keeps running and running.

64 bit Sony. Is it possible to restore to a config that was working 2 days ago?

View 4 Replies View Related

Computer Shuts Off After Few Hours

Sep 24, 2012

My computer has been shutting itself off within 6 hours or so of being turned on. It is always idle when it shuts off.

View 4 Replies View Related

Notebook 24 Hours Open?

Feb 5, 2011

Can I leave my notebook 24 hours open? I am doing video editing and it takes time and it uses lots of performance of the notebook too. Will I damage my notebook by keeping it open to do video editing always?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved