I own a Samsung QX410 and while I was browsing the Internet it crashed and would not start normally without crashing. So I've tried running Repair my system, even Repair my computer from my windows disk. But every time I do that it comes to a blue splash screen (with the bird, leaf, etc.) and it would not do anything. No options would come up and it would just sit there.
View 2 RepliesI recently got my first crash(0x00000050) on my pretty new Asus G74SX-A1 laptop while playing Half-Life: Source and never had any other blue screens before that. After that, I restarted and went to desktop and it eventually crashed again but when it did I opened Steam(not sure if connected). After that second crash, I went and scanned my PC on safe mode and then restarted again and tried to do a system repair but right after it was done I got the second BSOD(0x0000001a).
I have not recently installed any new hardware or anything that could change my system in any way. The last time I updated my PC's hardware was when I updated my graphics card (Nvidia gtx 560m) to a beta client about 3-4 weeks ago and haven't had any problems.
I looked through some of the error dumps my self to see what was causing the problems and it says it was "ntoskrnl.exe+7f1c0" but I'm not too sure what to do.
I provided the dump files in the attachements(2 dump files zipped). Edit: I think I might have fixed it by updating my graphics card, performing hard drive error checking, and chkdsk /f. I am not totally sure if it is resolved yet and if it is not, I will post back with more information informing that it has not worked.
My hp laptop suddenly always starting with startup repair. It has been working fine for months and now it cant startup. Could this be caused by running a java game for too lonng? Or possibly overheating?
View 1 Replies View Relatedmy laptop is not working. launch up repair is not starting. i have dell's inspiron 15R laptop. when ever i start my laptop it ask for launch up repair and start window normalyy. i have gone through both options but still my windows in not starting. when ever i select launch repair blue screen arrives and no dialog box appear on screen for many hours.. what is happened with my laptop and why its not starting. there was no virus in my laptop, m sure abt it.. is my windows is not working properly or is there any problem with my hard disk?
View 3 Replies View RelatedI have had Win 7 installed for a while now).
Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERSCLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05: AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.2.0.0.256.1
Locale Id: 1033
Every time I start my Asus laptop ~ 3 months old I get the above msg. Running Windows 7 home x 64. I have no problem with any of my programs.
View 3 Replies View RelatedEarlier this morning I restarted my laptop to the desktop and left it running. After coming back to my room a couple hours later, I noticed that there was a System Repair window on the screen. And whenever you see this there is always a state of being very concerned.I restarted my laptop only to be directed to the BSOD. I restarted the laptop, only to be presented with the same screen. I immediately took a picture with my cell phone to make sure I could read anything that could give me a clue as to what the error could be. Below are the error codes:
***STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA800CBABB30, 0xFFFFFA800CBABE10, 0xFFFFF80003B8B510)
I started up the laptop and was prompted with options to either start Windows as it usually would or to try and go through the system repair. I tried system repair again. I was brought to a screen to try and do a system restore to an earlier point. The closest restore point was earlier today and that was due to some critical updates that windows had automatically had downloaded and installed. So, I tried hitting that restore point only to be shown a window that stated that system restore was unsuccessful with the restore. I tried again with a restore point from a week ago and was again shown the same unsuccessful window.
The next thing I did was scour the internet for recent BSOD listings. Everything told me to get into Safe Mode by hitting the F8 button after restarting the computer. The first time I tried it, I hit Safe Mode (without networking or command prompt). I saw the screen fill up with file listings as it usually does, again to be prompted with the BSOD. The next time I tried hitting F8 I was only shown two options: Start Windows normally or the system restore option. I tried again searching the internet on my phone to try and first power down the laptop, take out the battery and hold down the power button for 30 seconds, which I first did. Then I went into the command prompt located in the system restore window. I performed chkdsk /r on the C: drive by typing:C:, then enter and chkdsk /r I was then prompted with something about having to dismount the C; drive in order to check the drive, and pushed Yes for that. After that was completed I was successfully able to find all the boot options in the F8 menu when you restart the computer. This was an arduous journey to get this far. Took quite awhile and there were many unsuccessful other attempts before trying this route.So, I tried the Safe Mode with Networking and booted successfully into Safe Mode. I tried running Norton which stated that I couldn't perform that action. So I tried restarting, FINALLY to boot into Windows. I am currently performing a full system scan with Norton 360 and will post my findings. I am also posting the minidump files that were asked for, in order to post in this forum below.
System Specs: Lenovo Y560
Intel Core i7CPU
1.73 GHz
64 bit Operating System
8.00 GB RAM
[code]....
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies View RelatedHow to repair missing operating system in asus laptop computer
View 5 Replies View RelatedI have trouble when starting my computer. it starts after two or three craches before the logo of windows appears... I checkd, cleaned, and defragmented the disk.. it looks ok..
View 1 Replies View Relatedi just crashed som1 64 bit lennovo laptop while i opperate a 32 bit pc dont have any windows system with me,it wont start on safe mode,and system repair has failed many times.the laptop was running on low battry and it shut itself,when i tryed to reboot it,it automaticly went to system repair which failed
View 2 Replies View RelatedI couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies View RelatedI'm looking for some assistance. I posted a while ago regarding this issue and I thought I had managed to find the source however, the problem has re-emerged again. I had submitted another update on my previous thread but haven't received
In summary, Windows Explorer regularly crashes - when I say regularly, I mean every time i access windows explorer.
I completed a repair install and thought this fixed the issue but it hasn't.
The crash is not related to any particular folder - it can happen when accessing My Docs or Prog Files, or any other folder.
My computer is loading up to the point the windows logo starts to flash before changing over to the chose user screen and then just frezing. I have tried runing the boot fix and it came up as unable to repair, i have tried restoring to most recent restore point and got the same problem. Has no issue booting into safe mode.
Am currently trying updating NVIDIA drivers to see if that fixes problem
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
My laptop Specs below:
Acer Aspire 5742
Intel i5-480M
6GB DDR3
Intel Graphics
It started when I needed to take the computer back to factory default with a fresh install. It was going back to Acer to have the charger point fixed (charger socket had become loose but still charged when it was held in). I used the control panel interface to reinstall windows, all was going well until the laptop power died, I restarted the laptop and the screen displayed:
"Setup is starting Services" a pop up box then appeared with "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer and then restart installation."
I have searched around the net and found a few guides but most require a repair disc or Installation disk. I have neither. Is there any way of starting the install again? For example from Command Prompt?
Windows wont boot up I get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically:
Problem signature:
�Problem Event Name: StartupRepair Offline
�Problem Signature 01: 6.1.7600.16385
�Problem Signature 02: 6.1.7600.16385
�Problem Signature 03: unknown
�Problem Signature 04: 21200718
�Problem Signature 05: AutoFailover
�Problem Signature 06: 10
�Problem Signature 07: BadDriver
�OS Version: 6.1.7600.2.0.0.256.1
�Locale ID: 1033
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View RelatedThe other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
View 3 Replies View RelatedIntel i7 920
6GB RAM
windows 7 home premium 64 bit
MSI x58 platinum motherboard
nvidia GTX 260 graphics
750w power supply
I got my system being fixed by a professional, but we're stuck right now trying to find a solution to my problem. The system is fine with 4GB in any slot, but when the third stick is put in, the system crashes.
I am using BlueScreenView to provide me with a read on the .dmp file. I've got an export of the crash:
==================================================
Dump File : 081912-26130-01.dmp
Crash Time : 8/19/2012 3:23:30 AM
Bug Check String : KMODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x0000001e
Parameter 1 : ffffffff`c0000005
[code].....
I am having a serious problem with sleep mode in WIN7. Whenever I put the PC in sleep mode, it will come back on when I hit ESC or move the mouse, but the monitor never comes back on and the PC is crashed. I can't do anything other than cut the power to get it to shut off. My bios is only the same version that came on the CD that came with the board. In the directions, it stated not to update the bios if I am not having problems, and up until I went to try to put it in sleep mode today everything has been running perfect. I have also not updated my ATI Catalyst software either, just still running the same stuff that came on the CD with the GPU.
I guess I figure why mess with success if all was well. My memory shows to be running at 1600 with the voltage at 1.65. I've done a bit of research on the topic, but there's lots of varied opinions on other forums I've seen. This symptom is very problematic and I am nervous about keeping on causing it to occur if I can't get a good handle on what to do first - when it did this I had to try rebooting twice for my machine to finally come alive again (the first reboot was unsuccessful and the monitor never responded similar to the first crash).
My build:
Intel i5 2500k CPU
Asus P8P67 REV 3.0 mobo
XFX Radeon 6850 GPU
CORSAIR XMS3 4GB (2 x 2GB) SDRAM DDR3 1600
Antec 750W PSU
Antec 902 case
Corsair CPU cooler
Western Digital Sata-6 1TB HDD
LG Bluray burner
Win7 Home Premium 64 bit
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
View 3 Replies View RelatedSo a week ago my computer started randomly blue screening, it did this twice before blue screening and making it impossible to launch (Would crash on start up) So i reinstalled windows however i have my old stuff in a folder called windows.old (windows put it there not me) however when ever i launch my PC i have to start up repair and roll back my PC till a time before it updated (It has a vital update every time i turn on my pc) im not sure if its the update or if its still broken.
View 2 Replies View Related[URL] These have continued and recently come to a head when trying to play Assassins Creed 2. It freezes the minute the game loads and I just get white noise from the speakers & have to hard reset the system.I'm not getting any BSOD's - the whole system just hangs.I'm just wondering whether (seeing as the ESTools came back clean) it's my graphics card that is causing the problem (and whether AC2 is triggering it?), but don't know how to check?
View 2 Replies View Relatedwell i am facing a very strange problem with my computer , my CPU is started crashing when i play games like Darksiders 2 , Max payne 3 or The Witcher -2 . it works sometime for hours and someting it crashes 5 times in 30 mins. , and when it crashes i see brown screen and the a sound like errr and then system restart. i took it to the service centre of ASUS and they checked my MB , GPU and RAM all is working fine . i tried almost 15 different RAM's but non helped problem remains same, i am telling my hardware specification: CPU: AMD Phenom 2 X4 955 black editionMB: ASUS M4A88T-MRAM: Corsair XMS3 4gb single chipPSU: Cooler Master ELITE 500 WATTS GPU: ATI RADEON HD 4850 Cabinet : Cooler Master ( with 2 120 mm inflow FAN's and 1 , 120 MM outflow) i also did all the bench mark tests for CPU ( using CPUZ) , GPU ( Fun Mark) and memory test all results are normal )
View 14 Replies View RelatedMicrosoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
ASUSTeK Computer INC. P5N-E SLI
[Code]....
Wireless Microsoft keyboard & mouse
This computer is 4-5 years old. Originally had Vista installed. Did a fresh install of Win 7 Pro x64when I bought the SSD drive.
In the last several months I have been upgrading it:
Installed 8 GB of 800MHz RAM - 4 months ago Installed a Crucial M4 SSD drive - 2 months ago Throughly cleaned all fans and the computer - 1 month ago Replaced Power supply that had failed - 2 weeks ago
This has been driving me crazy for quite a while. Before I replace the motherboard and cpu I wanted to see if someone could decipher the log files for me.
I have played with the BIOS settigs quite a bit. It may be time for me to return to default values..
I have just built a "Dream Machine" for the purpose of graphic design, and other intensive activities (though not gaming, as this is a work PC!).I won't go into all of the specifications, however the PC does use a Gigabyte X79-UP4 motherboard, and I have 16 Gigs of Patriot Viper Extreme (PC 17000) memory installed. Initial FSB / RAM results are shown below:I also installed 2 x Samsung 830 SSDs in RAID 0!The hard drive transfer rates are truly out of this world -The read speed is close to 1 Gbps...almost made it!!!Now that I have built an impressive PC I am having trouble making it behave, it is a bit like a wild stallion, full of raw power, but quite frankly untamed!Windows 7 (x64) is constantly crashing, it crashes about every 20 minutes, and it doesn't seem to matter whether the PC is doing work or not.
I have setup the RAM to use an Xtreme Memory Profile, which runs at 2133 MHz, which is not an issue for my RAM (as this is the RAMs) natural running speed.*** At any rate I plan to test the RAM for a good 48 hours using MemTest to see if there are any issues on this front ***I am thinking that there may be a conflict between the motherboards RAID chipset and the SSDs, in so far as perhaps the motherboard can't keep up with the SSDs.
I recently Upgraded my card to Jet Stream 660 ti and now I am facing problems, I play BF3 on my pc a lot and ever since I upgraded my card my system keeps on crashing , games minimizes sometimes and never get to fullscreen, sometimes I my get stuck at red screen and nothing comes up just the red screen. I play BF3 online a lot and never faced these kind a problems with my previous card gtx 9800 gtx +. And just a moment ago I still got hanged while playing BF 3 online and was able to see the notifications saying something about gtx 660 ti display drivers, but wasn't able read it fully, how I can I check what was that error. I am on win 7 pro x 64
I have Dual Xeon E5620
MOBO S5520sc
Kindston 12 gb ECC
Intel Workstation Chasis 5650
Windows 7 machine says a patch is preventing the system from starting. There are no system restore points either. System restore error code 0x0.
View 1 Replies View Related