I got a new computer on friday and have set it up today. I installed my windows 7 home premium 64bit and it downloaded,i then went on to put in my xfx AMD graphics card software disk and the download stopped half way through so i started it again and it got right to the last step where it has to re-start the computer. When it started up again insted of loading windows homepage it loaded the system repair screen, it searched and searched but said it had found no problem, so i clicked on the recovery tool restart option that then re-started the computer and the process started again and went straight back onto the system repair screen again. Is there anything i can do to stop it?
Last night I closed my laptop without shutting it down. I woke up this morning and turned it on and it went to the system repair screen and ran through that. It says there are problems but they are not automatically repairable. I then tried to do the system restore to an earlier point in time and had one option for a couple days ago. I ran through that but it says there is an error and when I expand to see the error one of the things listed is no OS installed. I have windows 7 64bit. Why it would say I don't have an OS installed but it is running through the system start up repair as well as listing a date that I could restore it back to. I have not tried installing the hard drive into a new computer yet.
my problem is rather odd (or at least I haven't seen it before). Whenever I boot up the netbook it goes right into startup repair, without the option to cancel it, even if I try to start windows in safe mode (or any other startup options for that matter), the system launches the startup repair.The repair itself runs fine (doesn't freeze or antyhing like that), however it is never able to fix the issue ("Startup Repair is unable to repair this computer automatically").
The problem details read as follows:
Problem signature: Problem event name: StartupRepairOffline Problem signature01: 0.0.0.0 Problem signature02: 6.1.7600.16385 Problem signature03: unknown Problem signature04: 6
has a zoostorm freedom which was working fine and now it's not!! It is stuck in a start-up repair loop. My husband has tried to follow solutions suggested on this site but no joy. Have also tried to re-install windows 7 but no luck either. Took it to PC world and they can't h
Every time I start up my Windows 7 Home Premiuem x64 laptop, I get the startup repair screen. It always says that the problem cannot be fixed; this has been going on since last night and I've tried several methods, none of which seem to work. It won't even let me access the login screen; as soon as I start my laptop it goes straight to startup repair.
My system is stuck in a boot loop while booting in safe mode,I was updating the drivers on my video card. I used driver cleaner pro to remove my old drivers. I then used msconfig to boot in safe mode with the minimal option selected. When the computer reboots I get to the screen to type in my password for 5 seconds an the computer reboots itself.
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
yesterday I was enjoying a match of league of legends on my computer and it completely froze up on me. I had no option but to give it the hard shutoff, so I held down the power button. Upon starting my computer back up, I was brought into system repair. It tried to repair and then said it could not be repaired, and so I restarted it. It then said it went into repairing once again and said it may take up to an hour. A minute later it said the errors were fixed, and restarted the system for me. It then continued to do that and has been doing that every time I restart it.I tried logging in to safe mode but it just brought me into system repair.I tried to restore to an earlier point but the restore failed.I tried using a Windows 7 Reinstall disk and had odd results. The first time it said a file was missing during the expanding files. The Second time it got to completing install and then said the disk was missing files to complete and to contact the disk manufacturer. I'm currently running it one more time to see if I can get it to work.All I have plugged in is the mouse, the keyboard, and the monitor.
I bought a new laptop yesterday and today decided to create a system repair disk. I inserted a blank DVD RW and started the process the progress bar went to about 60-70% (estimate, does not give actual progress %) in half an hour and has now been at that exact same point for the last 5 hours. I have had no errors and the window still says "creating disk..." and it still sounds as though the DVD drive is still writing onto the dvd. I Wouldn't think it would take this long to create especially with no progress.
Here is a summary of my problem: 1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot. 2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed. 3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more. 4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERSCLASSPNP.SYS" 5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline Problem signature 01: 6.1.7600.16385 02: 6.1.7600.16385 03: uknown 04: 21201099 05: AutoFailover 06: 2 07: Corrupt Volume OS Version: 6.1.7600.2.0.0.256.1 Locale Id: 1033
So, my computer is stuck in a restart loop. every now and then I see a screen with option to start windows normally or safe mode, but it loops faster then I can hit enter. being a comp guy and knowing enough about comps, tried to load Windows 7 install disk as well as Ubuntu Live Disk.. No luck, loops before they can load. Tried disconnecting everything except CPU, Graphic Card, HDD(3 different), and RAM (1 and all sticks).. No luck there either.
I'm trying to install Windows 7. I've tried a full format and once it saves files and reboots it doesn't continue further it just starts from the beginning again. The HD has come from another PC that was working. Where can I start?
I was using EASUS partitioning tool to repartition my hard disc a few days ago as my C: drive was running out of space. I merged the C: drive (which is my system drive) with my D: drive (which contains a lot of data as well). All seems to be going well, but after the usual reconfiguration and restart, my windows 7 is stuck in the startup repair screen. Windows is trying to repair my startup without success, which is resulting in a loop. Fortunately i am able to go into safe mode and save my data.
A friend asked me to look at their Acer laptop since it was acting up. It was riddled with viruses so I did a system restore. It is now stuck on a loop saying that Windows could not finish installation. Please restart to finish. I've restarted it several times and am still getting this message. I've used the system restore on several other computers and laptops and have not had this problem.
Ok I have a Dell Inspiron N7110. I kept getting the blue screen of death , ran all the registry cleaners,virus checkers, malware fixers I had, nothing ever showed up. all came back clean. but i still got the blue screen of death.. I even ran Combo fix to no avail. decided to do a Dell system backup restore. Since then I am stuck in a start up loop. I cant even boot from my cd drive succesfully now.Called Dell they ran the typical tests, ( ones I already did) and found nothing wrong with it, told me its not hardware issue that my warranty covers sent me to software issue department. ran the tests again. and he determined he can fix it but its not covered.I could buy their warranty for $250 which will cover me for a year for any software problems.. or pay $150 for the one time help that he could fix it but would not tell me what was wrong with it. I asked for the OS disk to be sent to me so I could try to do a new install from disk.. he said he could but it wouldnt help me so he wont. I am sickened by this customer support its obviously an issue with their backup crap.. I have a win 7 disk from my sons computer and I can't even run it as when I choose boot from CD it still goes right to start up repair so I can even do that.
Okay so i have this machine, acer m3100, that originally had windows vista. I tried to do a clean install of windows 7, with an original windows 7 installation cd.Everything would go okay until right after the computer restarts and goes to the part of COMPLETING INSTALLATION. At that moment my screen suddenly flashes with the blue screen of death. i wasnt able to right the error that shows up though. Then the computer restarts and goes to setup devices and right after that an error message appears saying, windows did not complete installation, due to an unexpected restart, restart the computer and restart the installation. If i click okay it will go into an endless loop. Restarting one time after another. So i thought i would install windows vista again. Try to make things the way they were before, but i get the same error. i'm only able to install xp. With XP everything works fine. I do want to be able to install windows 7 though.
I have a windows 7 pro 64 bit HP desktop computer that will not load windows. I have tried safemode, safemode w/ networking, and last know good config. I've run startup repair both from windowsRE and an original windows 7 pro disk. I have attempted multiple system restores (non destructive) to a number of different dates. The system restores say that they work but the machine still loops.
I know it's just some small windows corruption. I would have no trouble backing up my files with a linux distribution live flash drive and restoring the OS but I REALLY don't want to do that. How can I identify and repair the problem without starting from scratch. I'm familiar with msdos cli, but don't know which commands (if any) will help. I also don't know of any live CD's/ tools that will allow me to fix this problem. My problem here is simply lack of information.
When I tried to boot Windows 7 yesterday, I got a prompt saying that a disk check had been scheduled. I initially thought this got stuck because it seemed to freeze on 10% and the numbers alongside that figure didn't go up. I rebooted my computer and let it start again, after a few hours(!) the disk check finished and started on another of my drives. Again, I let this complete and it eventually rebooted itself. Upon rebooting it however, it did the exact same thing and appears to be in a loop just doing the disk check over and over.
I Googled this and opened the command prompt and checked all my drives (it disk checked f and c) but none are marked as dirty. I ran the command to stop the disk check on all drives anyway but still the problem persists.
Right at the start it says I can cancel the check by pressing any key on the keyboard but for some reason, it doesn't work - not sure if it's not recognising the keyboard or not.
I've also tried to boot into safe mode to see if that bypasses it but that hangs at classpnp.sys so that's a no go right now as well. I tried renaming the file to classpnp.old as a forum suggested but it blue screens and restarts if I do that. I'm currently trying a linux boot cd to replace to file to see if that works.
I reformatted my hard drive to install a copy of Windows 7 Ultimate, 64bit (I had Windows 7 Premium, 64bit before) and the installation ran just fine. After the installation, it boots up to what I guess is the desktop, waits a few moments, then just reboots. Every time before it boots it goes to the "Windows is loading files..." screen. I also tried 32bit, but got the same results. If you need more information, just ask and I'll be glad to provide it for you. A USB stick was used to install.
when I was playing a game and it crashed on a loading screen, I then could only boot into windows extremely slowly so I knew something was wrong. Since then I have booted into safe mode and done a virus check and it found nothing, I had then done a start up repair multiple times and for one reason or another the system would then reboot just as the login screen is loading. I have recently de fragmented the drive externally and run a slow disk check which found nothing. I've launched start up repair again which says it's unable to fix the problem and I can't boot into safe mode because it'll reboot. I should also mention I was having problems with the drive a few weeks ago where I was getting different error messages before booting but I managed to sort that out. If a solution can't be found it would be safe to say the drive is failing. Here is the bsod when I disabled automatic rebooting along with the startup repair error.
My wireless won't connect to the internet at work and get stuck saying it is identifying. It works at home. All the other computers in the office work so it must be my computer. I've tried stuff on other forums or just get ignored. I operate a Lenovo V570 with Windows 7 64bit. The internet works when wired. Its just the wireless.
My wireless won't connect to the internet at work and get stuck saying it is identifying. It works at home. All the other computers in the office work so it must be my computer. I've tried stuff on other forums or just get ignored. I operate a Lenovo V570 with Windows 7 64bit. The internet works when wired. Its just the wireless.
I was recently using my girlfriends computer when a message came up saying something about an automatic update then went into a repair mode. Then when the computer restarted it went into startup repair. It says it can't find any problems, and when you restart it, it keeps going to startup repair. The computer originally had XP on it, and her step dad installed 7 right before we moved across the country, so we don't have any kind of install or recovery discs
I get into startup repair everytime i boot my pc which is never successful. I am definitely goin to explain it in detail but dis is basic problem nd plz dont mind typing coz m typing fast on iphone which may cause errors in typing!Yesterday,i used my pc for 7-8 hrs continuosly which is not big deal but due to it i can't figure out my action which caused problem. I kept it on for downloading at night nd when in morning i got boot screen which comes when pc is directly turned off. I did Start Windows Normally nd i got usual windows 7 loading animation for a secong nd den it started startup repair after that everytime i boot it takes me to startup repair resulting in continuos failure. I hv googled nd found many threads but none matched my exact one. Startup infinity loop didn't work. Below r given few conclusions nd obstacles-1.) i can't get into advanced boot options using F8. But i can get into recovery menu using install dvd nd view advanced options frm startup repair.
2.) System restore din't work. I mean its not successful in restoring.3.) bootrec.exe didnt work4.) imp point to be noted is my last update was on 23 dec while pc worked fine on 24 th & 25th dec means dont knw wat happened 25th night that caused this problem on 26th morning.5.) sfc/scannow says "a startup repair is left to be completed." it says to complete that first then use sfc/scannow.6.) chkdsk results in last line saying failed to transfer log......7.) i also get a report like many others about that problem signature.8.) repair install not possible coz windows can't start only.9.)i hv made a backup using cmd but is there any way without clean install?
I have looked into the startup repair loop problem a bit and have tried the advanced repair option but when it prompts me for a login and password, it only gives the option to log in as "updatususer".
I get the following on boot up Launch startup repair (recommended)start windows normally Selecting either options causes it to enter an infinite loop The last thing I did while it was working was to install a HP printer, it then said restart and since then I have not been able to get pass the Launch startup repair (recommended)start windows normally stage I have tried all the options under F8 on boot, but happy to try any suggestions as I could be completely wrong or may have overlooked something.PS I have read the threads on this forum but can not seem to get it started using the suggestions.
After a (sloppily done on my part) multiple driver update on 7 Home Premium x64, I've been tossed into Startup Repair. SR goes into an endless repeating loop - never reporting failure, just an endless repeat. I've used the Windows 7 install disk and tried System Restore. Twice System Restore has reported success, yet I immediately end up booting back into the Startup Repair loop.
I am given no options - when I try F8 I'm simply tossed back into Startup Repair. I'm thinking there may be a command prompt way out of the loop, but I'm clueless in that area.
It started about a year ago, i just left it but now i feel the need to try and fix it. I have gone through Startup Repair Infinite Loop Recovery but it was no helpful.
my acer aspire 5535 laptop wont boot up at all even in safe mode it just keeps running the repair loop ive tried dskchk several times using different swiches to no avail ive tried the regback tutorial again no joy.I have noticed an anomaly thow when you let windows start and automatically go to start up repair the message says windows cannot repair this computer automatically .however if you press f8 and go to the repair screen then start up repair the message comes up saying startup repair cant find anything wrong with this computer.When you look at results it says windows os booted correctly
I'm not sure if I am in the right category but I'll just leave it here. I downloaded a corrupt file and my computer went crazy and so I shut it off and now it keeps going through the start up repair over and over. It'll say that it's rapaired and it will restart but then it will go straight back into doing it over and over. Can someone please answer this quickly because finals are next week and I have unfinished papers and websites and animations on my computer that need to be handed in pronto.
I am currently working on an emachines e525 (its for a friend, I would never buy an emachine) and when I got the machine it was stuck in a boot loop to the startup repair. I could not boot into windows via safe mode or any other method. I ended up reinstalling Windows 7 and everything looked fine until I rebooted. The startup repair loop started again. Frustrated at this point I formated the hard drive and installed Windows XP. It was working great for a while even after I rebooted several times. I went to bed and then today turned the laptop back on and I got the unmountable_boot_volume blue screen.I also have ran chkdsk multiple times and it doesnt find anything to repair. I also ran a memory test (even though I did not believe that is/was the issue and it came back with no errors.
