my acer aspire 5535 laptop wont boot up at all even in safe mode it just keeps running the repair loop ive tried dskchk several times using different swiches to no avail ive tried the regback tutorial again no joy.I have noticed an anomaly thow when you let windows start and automatically go to start up repair the message says windows cannot repair this computer automatically .however if you press f8 and go to the repair screen then start up repair the message comes up saying startup repair cant find anything wrong with this computer.When you look at results it says windows os booted correctly
I'm not sure if I am in the right category but I'll just leave it here. I downloaded a corrupt file and my computer went crazy and so I shut it off and now it keeps going through the start up repair over and over. It'll say that it's rapaired and it will restart but then it will go straight back into doing it over and over. Can someone please answer this quickly because finals are next week and I have unfinished papers and websites and animations on my computer that need to be handed in pronto.
I got the "infinite repair start up" sequence on my laptop. I googled and tried all the fixes, but none seemed to work for me. So, I got a fresh download of Win 7 (it's the free trial version) and am trying to install it.It seems to go fine, but then it says it cannot find the drivers for my dvd drive. I have the Dell drivers disk (not sure if the driver is even on there... never used it before) but it doesn't seem to find anything on it.
Ok I have a Dell Inspiron N7110. I kept getting the blue screen of death , ran all the registry cleaners,virus checkers, malware fixers I had, nothing ever showed up. all came back clean. but i still got the blue screen of death.. I even ran Combo fix to no avail. decided to do a Dell system backup restore. Since then I am stuck in a start up loop. I cant even boot from my cd drive succesfully now.Called Dell they ran the typical tests, ( ones I already did) and found nothing wrong with it, told me its not hardware issue that my warranty covers sent me to software issue department. ran the tests again. and he determined he can fix it but its not covered.I could buy their warranty for $250 which will cover me for a year for any software problems.. or pay $150 for the one time help that he could fix it but would not tell me what was wrong with it. I asked for the OS disk to be sent to me so I could try to do a new install from disk.. he said he could but it wouldnt help me so he wont. I am sickened by this customer support its obviously an issue with their backup crap.. I have a win 7 disk from my sons computer and I can't even run it as when I choose boot from CD it still goes right to start up repair so I can even do that.
has a zoostorm freedom which was working fine and now it's not!! It is stuck in a start-up repair loop. My husband has tried to follow solutions suggested on this site but no joy. Have also tried to re-install windows 7 but no luck either. Took it to PC world and they can't h
In my Program Folder, I have a TEMP Folder (Empty). When I right click and try to delete the folder, I enter a loop with no end. The Pop Window display like it is trying to remove the whole Programs Folder.
Yesterday I was installing XP on one of partitions I made for it,because I had problems recording stereo tracks for studio on Windows 7( in my previous encounters like that,it worked on XP ).After installation of XP it would restart and just give Unable to load operating system and I couldn't boot in Windows 7 because as most of you probably know,XP overwrites boot section of Windows 7( but that's an easy fix with EasyBCD ).Now I tried fixing the problem with Windows 7 installation DVD and startup repair but no use,then I tried MBR tutorial and it got me to splash screen,but that's where my infinite loop started.Then I tried doing backup with command prompt as in one of tutorials here: Startup Repair Infinite Loop Recovery but no results unfortunately. Or am I going to be forced to do clean install? I temporarily installed Windows 8 Release Preview on XP partition just so I can do stuff until Windows 7 is fixed.
When I first booted it up, it began to do it's first time windows load, when I got a BSOD of 0x0000004E and it shut down. Upon restart I got to the point where it tells me " windows was interrupted upon installation, install will proceed after restart" it then restarts and does the same thing. If I shut it off and turn it back on I get the page on choosing to boot normal or in safe mode, but I never get the bios options, as I have the windows 7 SP1 cd that came with.
My original os is windows 7. So today I connected a hard drive from a windows xp machine so I could transfer some files. When I powered the computer back on I got a blue screen right after the windows 7 loading screen and the computer rebooted. I then got the black screen asking if I want safe mode last known configuration or start windows normally. I chose start normally and i got bluescreen/rebooted back to this screen. I then chose last known good configuration and was bluescreen/rebooted back to the screen, this time I chose safe mode. Safe mode began to load files and then stopped at mup.sys bluescreened and rebooted. The system then tried to do the windows repair thing and I did the system restore option and rebooted, this didnt help and I put in my windows 7 installation cd hit repair and tried bootrec.exe, none of the options worked [fixmbr fixboot etc] and the system doesnt recognize that any OS are installed.
I'm building a computer myself and I can't for the life of me get windows 7 to install. Here is my configuration and what I've tried..
Motherboard: GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Rev 2.0, BIOS version �FA� Processor: Intel Core i7 930 2.80GHz 8MB LGA 1366 L3 Quad Core Desktop Processor - BX80601930 Memory: Corsair XMS3 6GB DDR3 SDRAM Memory Module - 6GB (3 x 2GB) - 1600MHz DDR3-1600/PC3-12800 - DDR3 SDRAM 9-9-9-24 version 2.3a Optical Drive: ASUS Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM 2MB Cache SATA 24X DVD Burner - Bulk - OEM Power Supply: OCZ Technology GameXStream 850W ATX12V & EPS12V Power Supply ard Drive: Western Digital Caviar Blue WD5000AAKS 500 GB - Hard Drive � Bulk Graphics Card: GALAXY 70XKH3HS8GUX GeForce GTX 470 Graphics Card - PCI Express 2.0 x16 - 1.25 GB GDDR5 SDRAM Operating System: Microsoft Windows 7 Home Premium 64-bit 1-Pack for System Builders � OEM Case: Cooler Master HAF 922 RC-922M-KKN1-GP Chassis - Mid-tower - 10 Bays � Black
What I first did to install: I change the bios to boot from the Optical Drive Put the Windows 7 CD into the optical drive.Follow the on screen instructions for the windows install. Windows copies the files, extracts and installs. The system reboots. When Windows attempts to start for the first time the windows logo comes up and does its animation. The system then reboots. The screen comes up that tells me windows didn�t start properly and do I want to try safe mode, etc etc. If I do safe mode drivers scroll until it gets to disk.sys. At this point it freezes for a minute or two and reboots.
Things I�ve tried:
I have pared down to 1 stick of 2 GB of the ram I�ve tried using both of the other sticks of ram (individually) in case I had a bad stick I�ve tried with an older ATI PCI video card in case it was a video card compatibility issue I�ve tried reformatting and deleting the system partition and reinstalling I�ve tried reformatting from another working computer and reinstalling I�ve tried many windows repairs, often it says it can�t fix it, or tries something and restarts.
Once it was �repairing disk errors� and it did that in about a minute. Didn�t work. Othertimes it gives me a failure during setup, tries to fix it, didn�t work.I�ve reset the bios to optimized I�ve tried manually changing the multiplier of the ram in the bios. fter about 25 -30 reboots bios resets and repairs it finally looked like it was working, did some more installation stuff, restarted, and started the damn reboot sequence over and over� Now when I run in safe mode the last line to come up is Loaded: windowssystem32driversClasspnp.sys Looks like it made it a step farther, for no reason, I really didn�t change anything except repeated attempts. Many more attempts at repairs and resets haven�t gotten any further.
So I decided I wanted to try Microsoft Security Essentials for some reason. I uninstalled Avast and all traces of it. I installed MSE and everything went smoothly. I noticed it was setup to automatically scan every Sun. night. I left it that way. Monday morning I wake up to the infinite reboot. Because of the aforementioned I am 95% sure it is software related, but maybe that is because I don't want to spend money on new hardware right now.
I've tried every safe mode. I've tried to load the last known good config. I tried to repair with my Win 7 disc, but it always restarts itself before I can get anything done. I also tried system restore and also reformatting with the disc, but I get no more than a minute once I've started the computer. I've also tried scheduling memory and system checks at startup but they never get a chance to run.
My system: Win 7 i5 2.67 ghz hitachi 500gb hd 4gb dd3 gtx 560ti
A Dell Inspiron E1705, w/ 2x2gb mem, 500 gb hd, ATI Radeon x1400 vid and Win 7.There were no Dell drivers or programs and the system BIOS was ver A01. Checking the Dell website against the Service Tag, I found 22 drivers and programs specific to the computer. Most of them ran and installed under Win 7 with no trouble. The last one was the bios flash utility program to update the bios to ver A10. The bios flashed, seemed to go ok. But on system reboot, after the initial screem about resetting the memory sticks, the computer is stuck in an infinite reboot loop.It loads the initial POST screen, completes the POST, seeks for its boot device and when it finds and starts to access the installed HD it reboots. I have reset all the bios settings to factory default settings. I have pulled the system battery and "cleared the cmos", but no joy there. I have created a bootable usb flash drive with another Dell laptop, and the computer will boot from that. I have other bootable cd's, and the computer will boot from them. I can use the bootable cd's to determine that the programs they run (freeware backup programs and a copy of bart pe) can access the installed hd,and see the files there, so the installed hd is intact. But i still can't get the computer to boot from it.My first thought was to reinstall the ver A01 bios, but it would not complete the process and remained at ver .A10. I was able to flash bios A09, and then A07, etc, all the way back to ver A04. But after that I could go back no further, A02 and A01 flash utilities returned an error message. If I found some compatible mem sticks and a smaller hd, installed them, could I reflash bios ver A02 or A01? Would that do me any good? (I have 2 x 256 mg mem sticks from a dell inspiron 5100 which I upgraded to 2x1gb, and a 40 gb 2.5in hd that also came out of the 5100, so I could use those parts in the e1705 to reflash the earlier bios)
the only way I can accurately portray my predicament is via numbered flow chart:
1. Wake up sleeping computer, nothing happens, starts humming faster and faster, so I pull the plug.
2. Turn on computer, goes through the ASUS screen, then the mother board screen has some weird pixelation on the left scree, like some lines or something. Windows is loading....then black screen forever. do this 1 or 2 more times.
3. Go to System Repair and System Restore. Repair fails and tells me a Boot Driver is failing. Restore fails each time.
4. Hold F1, go to boot menu, hit F8, select Safe Mode. Safe Mode works, fantastic.
5. Do AVG Defrag, Disk Clean, and Disk Repair. Then restart...now I get a blue "Dumping Physical Memory" screen.
6. Go back to Safe Mode, use boot disk, tell it to un/re-install windows.
7. Come back later and find it in Phys Mem dump loop, pop it into Safe Mode again. I then see two Windows 7 OSs to choose from, pick the bottom one. Says it can't complete installation in Safe Mode, restart it normal, Phys Dump loop.
8. I do the same thing for the top Win 7 choice, same thing.
9. I've back up all my files, and have drivers/boots disks for everything I own. How do I wipe my hard drive and start fresh?
Basically what originally happened was that I tried installing windows 7 off of my hard drive and during the "completing installation" phase the computer lost power and was shut down. Turning the computer back on iIhad a screen which said something of the likes of set up is starting. From then on I was in a infinite boot loop where it would give me a set up screen and restart. I desperately needed to backup my files which I did not bother to do so.
I used my secondary desktop running vista, plugged in my other hard drive and backed up all my files successfully. I thought I would format the disk since I was done backing up all my data and I would go right on ahead and install a fresh windows 7 via the CD. I go into bios and set the windows CD to boot and I unplug my vista hard drive and leave only the formatted 1TB HD plugged in. And now I get the "BOOTMGR is missing" error. As I have read it's due to deleting everything off the hard drive including the...bootmanager.
Now with the tools that I hold (mobo with bios access, windows 7 installation CD, another hard drive with Vista). How shall I go about getting my hard drive ready to install a fresh copy of windows 7. I have the retail cd, I have another HD with vista if needed, and I have the clean hard drive which i would wish to install windows 7. I set my bios to boot via the CD first and put in the disc and let it work it's magic, I would like to point out that it still gives me a BOOTMGR error. It asks me to press a key to load from the CD and then I get the error that I know is coming.
The screen cracked on my old laptop and my insurance decided it would be cheaper to give me a new one as opposed to fixing it. The new laptop arrived today, along with the hard drive from my old one. I thought it would be simply a case of opening the new laptop up, taking out the hard drive and putting in my old one (note: I turned on the laptop with it's new hard drive first to make sure it worked ok).
However, after doing this and turning on the laptop, I am faced a message saying "Windows failed to start. A recent hardware or software change might be the cause.". I am given 2 options, Launch Startup Repair or Start Windows Normally. Clicking Start Windows Normally just brings me back to the same screen, and I've tried running the startup repair several times to no avail. Following the instructions at Startup Repair Infinite Loop Recovery also does not solve the problem.
I was trying to reinstall window 7 on my laptop i couldnt factory reboot it so i was installing it with a window's 7 set I had on my laptop but it crashed part way through and no its stuck in an infinite loop and it comes up the error of "the computer restarted unexpectedly or encountered an unexpected error. Windows installation cannon proceed. to install windows, click "OK" to restart the computer, and then restart the installation."
on March 13, the "tuesday windows update packet" started updating my system automatically. It auto downloaded the updates (which I didn't realize it was even updating) It seemed to be hanging on the shut down screen. I came into the room about 2 hours later and Windows was still shutting down (actually it was on the blue screen that says, shutting down) Not knowing that the computer updating, I shut the computer off by hitting the power button because I thought it was weird it didn't shut down 2 hours earlier. I have read other posts where people also experienced this same scenario... the update seemed to freeze the computer at shutdown.The next day I tried to boot up... and the computer would not boot to the desktop, even in Safe Mode. I tried to do a system restore, system repair, etc. to dates before March 13... even Feb. 28th... but system restore did not work.
After 5 hours of trying various entries into the command prompt... I found this one that worked.:
I was able to load back into the desktop with almost everything functioning properly. Once the computer loaded back up to the desktop... I checked windows update and 5 of the updates failed. So, I started to update them one by one, which they did successfully... except one. The last update on the list, which is a Windows 7 x64 critical update KB2639308... still isn't updating properly and... it causes the infinite startup loop if I try to update. I read on Microsoft Answers that several others were having the same exact problem as me... the first time they downloaded the update, it froze their computers at the shutdown screen for hours and hours, they turned off their computers and got stuck in the infinite startup loop.Also, when it goes into the infinite loop, and I run Startup Repair, the diagnostic passes all tests except it does say this: Startup repair Diagnosis and repair details:
Last night i was playing a game (DmC) on my computer and my cousin came out of nowhere and unplugged everything. (it was a multi plug that was connected to my tv, monitor and computer) When i turned my pc back on: it asked me if i wanted to repair the problem; so i clicked yes. After awhile, the computer restarted, but now it can't seem to start normally anymore, all the safe mode options work, but every time i choose to start it normally; it just goes in an infinite start up loop.It shows the hp logo, then says that it's starting up, shows a black screen with the mouse symbol showing and starts that pattern all over again.
(specs) an hp pavilion p7-1205 with a 2nd generation intel core i5-2320 processor intel hd graphics 2 terabyte hard drive wireless lan 802.11b/g.n genuine windows 7 home premium
I have the Asus A55A EB71 (although I can't find it on Asus website itself, probably known under another name) So long story short, this is what I did that is causing my current problem:
F8 Boot, repair mode, restarted during the middle of "loading files" (yes, I know, bad idea) If I try the safe modes or repair, it says windows is loading files, then it says to repair etc etc (recommended), and start windows normally. Start windows normally sends me to Reboot and select rproper boot device.
Anyway, I get the reboot and select proper boot device screen. I checked BIOS, boot option 1 = "windows boot manager...", #2 = dvd, so not boot option priority issue I tried F9 Boot (to do this: URL], however, only option is Windows 7, and windows memory diagnostic.
The laptop did not come with a recovery disk, nor did I make one. I had a system restore file on an external hard drive, but I just formatted the drive today for a Mac thinking, "hey, I never have those problems, I'll just make a system restore when I get home."
What can I do? It's a relatively new laptop so i can factory reinstall, although I dont know how. I tried this: [URL], but there is no recover windows to entire HD option.
I personally still use xp pro x32 so I'm not fully up to speed with win 7.The beast, hereinafter called 'it' has started going into infinite boot ups and trying various fixes (including restoring the hives) have been unsuccessful and the original hives put back. It was originally a Vista OS and was upgraded to Windows 7. Before it went sick, AVG10 reported trojan.Redbrowser. Despite providing instructions to remove, my friend reported that the trojan had stopped doing whatever it was it did. (Hmm, I don't think so) Anyway a few days later AVG10 apparently disappeared and stopped scanning. The infinite reboot started and 'it' is now in my hands.
Won't boot 'Last known good ...' Won't boot in safe mode Won't boot to safe mode command prompt
Tried system repair (auto) - both from it and from Windows 7 cd - same result 2-iterations get me to login screen, leaving alone or logging in. Same result - reboot Using recovery options - system restore - attempting repairs gives unknown Bugcheck f4 params 0x3, 0x84c81c48, 0x84c81db4, 0x8201bd60 clicking finish gives a reboot but cancel gets me to 'choose a recovery tool'Using system restore gives unsuccessful - failed to extract file C:windows$Nt..from restore point.There are 3-other System Image restore points in Backups , but get message 'selected backup not found'. The backup sets are on another partition on same disk and can be seen from command prompt provided in the recovery options but I can't find a way to tell 'it' to look there.I've tried both rstrui and wbadmin from the command prompt but still can't get them to see the backups - just 'not found' errors.
I was recently using my girlfriends computer when a message came up saying something about an automatic update then went into a repair mode. Then when the computer restarted it went into startup repair. It says it can't find any problems, and when you restart it, it keeps going to startup repair. The computer originally had XP on it, and her step dad installed 7 right before we moved across the country, so we don't have any kind of install or recovery discs
Every time I start up my Windows 7 Home Premiuem x64 laptop, I get the startup repair screen. It always says that the problem cannot be fixed; this has been going on since last night and I've tried several methods, none of which seem to work. It won't even let me access the login screen; as soon as I start my laptop it goes straight to startup repair.
I get into startup repair everytime i boot my pc which is never successful. I am definitely goin to explain it in detail but dis is basic problem nd plz dont mind typing coz m typing fast on iphone which may cause errors in typing!Yesterday,i used my pc for 7-8 hrs continuosly which is not big deal but due to it i can't figure out my action which caused problem. I kept it on for downloading at night nd when in morning i got boot screen which comes when pc is directly turned off. I did Start Windows Normally nd i got usual windows 7 loading animation for a secong nd den it started startup repair after that everytime i boot it takes me to startup repair resulting in continuos failure. I hv googled nd found many threads but none matched my exact one. Startup infinity loop didn't work. Below r given few conclusions nd obstacles-1.) i can't get into advanced boot options using F8. But i can get into recovery menu using install dvd nd view advanced options frm startup repair.
2.) System restore din't work. I mean its not successful in restoring.3.) bootrec.exe didnt work4.) imp point to be noted is my last update was on 23 dec while pc worked fine on 24 th & 25th dec means dont knw wat happened 25th night that caused this problem on 26th morning.5.) sfc/scannow says "a startup repair is left to be completed." it says to complete that first then use sfc/scannow.6.) chkdsk results in last line saying failed to transfer log......7.) i also get a report like many others about that problem signature.8.) repair install not possible coz windows can't start only.9.)i hv made a backup using cmd but is there any way without clean install?
I have looked into the startup repair loop problem a bit and have tried the advanced repair option but when it prompts me for a login and password, it only gives the option to log in as "updatususer".
I get the following on boot up Launch startup repair (recommended)start windows normally Selecting either options causes it to enter an infinite loop The last thing I did while it was working was to install a HP printer, it then said restart and since then I have not been able to get pass the Launch startup repair (recommended)start windows normally stage I have tried all the options under F8 on boot, but happy to try any suggestions as I could be completely wrong or may have overlooked something.PS I have read the threads on this forum but can not seem to get it started using the suggestions.
I got a new computer on friday and have set it up today. I installed my windows 7 home premium 64bit and it downloaded,i then went on to put in my xfx AMD graphics card software disk and the download stopped half way through so i started it again and it got right to the last step where it has to re-start the computer. When it started up again insted of loading windows homepage it loaded the system repair screen, it searched and searched but said it had found no problem, so i clicked on the recovery tool restart option that then re-started the computer and the process started again and went straight back onto the system repair screen again. Is there anything i can do to stop it?
After a (sloppily done on my part) multiple driver update on 7 Home Premium x64, I've been tossed into Startup Repair. SR goes into an endless repeating loop - never reporting failure, just an endless repeat. I've used the Windows 7 install disk and tried System Restore. Twice System Restore has reported success, yet I immediately end up booting back into the Startup Repair loop.
I am given no options - when I try F8 I'm simply tossed back into Startup Repair. I'm thinking there may be a command prompt way out of the loop, but I'm clueless in that area.
It started about a year ago, i just left it but now i feel the need to try and fix it. I have gone through Startup Repair Infinite Loop Recovery but it was no helpful.
I am currently working on an emachines e525 (its for a friend, I would never buy an emachine) and when I got the machine it was stuck in a boot loop to the startup repair. I could not boot into windows via safe mode or any other method. I ended up reinstalling Windows 7 and everything looked fine until I rebooted. The startup repair loop started again. Frustrated at this point I formated the hard drive and installed Windows XP. It was working great for a while even after I rebooted several times. I went to bed and then today turned the laptop back on and I got the unmountable_boot_volume blue screen.I also have ran chkdsk multiple times and it doesnt find anything to repair. I also ran a memory test (even though I did not believe that is/was the issue and it came back with no errors.
I have been fighting with this tower that I am working on for a bit and I need to solicit your experience.his is an older tower, a Radiant S336-024 with an Intel 945G board.I am installing an SCSI Samsung 40Gb HDD and a SATA 180 Gb HDD.I had it booting before. I installed windows 7 with the 40 installed and it was hit and miss. I have turned off the automatic updates and now it will run some of the time. I often restart the system and it goes straight to Startup Repair without warning.
The hard drive on my laptop recently failed and I purchased and installed a new one to replace it. I cloned as much of the data off of the old drive as possible. However, when I go to boot from it, it gets stuck in a startup repair loop. Startup repair doesn't find any problems, but it is unable to boot windows. I installed windows 7 on a new partition see if I could do a repair install to the other hard drive, but that does not appear to be possible. I've ran chkdsk and it does not find any errors. Is there anything else that I should try to be able to run the older install, or should i just start reinstalling everything.
