Infinite Reboot System Repair Can't Fix
Sep 18, 2011
I personally still use xp pro x32 so I'm not fully up to speed with win 7.The beast, hereinafter called 'it' has started going into infinite boot ups and trying various fixes (including restoring the hives) have been unsuccessful and the original hives put back. It was originally a Vista OS and was upgraded to Windows 7. Before it went sick, AVG10 reported trojan.Redbrowser. Despite providing instructions to remove, my friend reported that the trojan had stopped doing whatever it was it did. (Hmm, I don't think so) Anyway a few days later AVG10 apparently disappeared and stopped scanning. The infinite reboot started and 'it' is now in my hands.
Won't boot 'Last known good ...'
Won't boot in safe mode
Won't boot to safe mode command prompt
Tried system repair (auto) - both from it and from Windows 7 cd - same result 2-iterations get me to login screen, leaving alone or logging in. Same result - reboot Using recovery options - system restore - attempting repairs gives unknown Bugcheck f4 params 0x3, 0x84c81c48, 0x84c81db4, 0x8201bd60 clicking finish gives a reboot but cancel gets me to 'choose a recovery tool'Using system restore gives unsuccessful - failed to extract file C:windows$Nt..from restore point.There are 3-other System Image restore points in Backups , but get message 'selected backup not found'. The backup sets are on another partition on same disk and can be seen from command prompt provided in the recovery options but I can't find a way to tell 'it' to look there.I've tried both rstrui and wbadmin from the command prompt but still can't get them to see the backups - just 'not found' errors.
View 2 Replies
ADVERTISEMENT
Jan 12, 2012
When I go to Control PanelAll Control Panel ItemsPerformance Information and Tools and click "Rate this computer," it crashes before it's done.Desktop Window Manager Sessions Manager is disabled, not running, and the option to start it is greyed out. sfc scannow didn't finish, so I ran it at boot (url) That gave me the error "There is a system repair pending which requires reboot to complete." I rebooted into windows and then back to the disc several times and got the error each time. My computer does not have a pending.xml file. Since sfc scannow wasn't working, I tried to do a repair install (as described here: http://www.sevenforums.com/tutoria [...] ml?ltr=R). I ran the compatibility check (by clicking "upgrade" after starting setup) on the windows 7 disk and it gave me this message: "Windows needs to be restarted so necessary changes to system files can be made before continuing." Restarting, however, does not accomplish this. What can I do? It seems my main problem right now is finishing up whatever Windows thinks it needs to update on a reboot (I've rebooted many times since discovering the message.
View 2 Replies
View Related
Nov 6, 2012
Yesterday I was installing XP on one of partitions I made for it,because I had problems recording stereo tracks for studio on Windows 7( in my previous encounters like that,it worked on XP ).After installation of XP it would restart and just give Unable to load operating system and I couldn't boot in Windows 7 because as most of you probably know,XP overwrites boot section of Windows 7( but that's an easy fix with EasyBCD ).Now I tried fixing the problem with Windows 7 installation DVD and startup repair but no use,then I tried MBR tutorial and it got me to splash screen,but that's where my infinite loop started.Then I tried doing backup with command prompt as in one of tutorials here: Startup Repair Infinite Loop Recovery but no results unfortunately. Or am I going to be forced to do clean install? I temporarily installed Windows 8 Release Preview on XP partition just so I can do stuff until Windows 7 is fixed.
View 9 Replies
View Related
Aug 16, 2011
My original os is windows 7. So today I connected a hard drive from a windows xp machine so I could transfer some files. When I powered the computer back on I got a blue screen right after the windows 7 loading screen and the computer rebooted. I then got the black screen asking if I want safe mode last known configuration or start windows normally. I chose start normally and i got bluescreen/rebooted back to this screen. I then chose last known good configuration and was bluescreen/rebooted back to the screen, this time I chose safe mode. Safe mode began to load files and then stopped at mup.sys bluescreened and rebooted. The system then tried to do the windows repair thing and I did the system restore option and rebooted, this didnt help and I put in my windows 7 installation cd hit repair and tried bootrec.exe, none of the options worked [fixmbr fixboot etc] and the system doesnt recognize that any OS are installed.
View 14 Replies
View Related
Aug 6, 2010
I'm building a computer myself and I can't for the life of me get windows 7 to install. Here is my configuration and what I've tried..
Motherboard: GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Rev 2.0, BIOS version �FA�
Processor: Intel Core i7 930 2.80GHz 8MB LGA 1366 L3 Quad Core Desktop Processor - BX80601930
Memory: Corsair XMS3 6GB DDR3 SDRAM Memory Module - 6GB (3 x 2GB) - 1600MHz DDR3-1600/PC3-12800 - DDR3 SDRAM 9-9-9-24 version 2.3a
Optical Drive: ASUS Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM 2MB Cache SATA 24X DVD Burner - Bulk - OEM
Power Supply: OCZ Technology GameXStream 850W ATX12V & EPS12V Power Supply
ard Drive: Western Digital Caviar Blue WD5000AAKS 500 GB - Hard Drive � Bulk
Graphics Card: GALAXY 70XKH3HS8GUX GeForce GTX 470 Graphics Card - PCI Express 2.0 x16 - 1.25 GB GDDR5 SDRAM
Operating System: Microsoft Windows 7 Home Premium 64-bit 1-Pack for System Builders � OEM
Case: Cooler Master HAF 922 RC-922M-KKN1-GP Chassis - Mid-tower - 10 Bays � Black
What I first did to install: I change the bios to boot from the Optical Drive Put the Windows 7 CD into the optical drive.Follow the on screen instructions for the windows install. Windows copies the files, extracts and installs. The system reboots. When Windows attempts to start for the first time the windows logo comes up and does its animation. The system then reboots. The screen comes up that tells me windows didn�t start properly and do I want to try safe mode, etc etc. If I do safe mode drivers scroll until it gets to disk.sys. At this point it freezes for a minute or two and reboots.
Things I�ve tried:
I have pared down to 1 stick of 2 GB of the ram
I�ve tried using both of the other sticks of ram (individually) in case I had a bad stick
I�ve tried with an older ATI PCI video card in case it was a video card compatibility issue
I�ve tried reformatting and deleting the system partition and reinstalling
I�ve tried reformatting from another working computer and reinstalling
I�ve tried many windows repairs, often it says it can�t fix it, or tries something and restarts.
Once it was �repairing disk errors� and it did that in about a minute. Didn�t work. Othertimes it gives me a failure during setup, tries to fix it, didn�t work.I�ve reset the bios to optimized I�ve tried manually changing the multiplier of the ram in the bios. fter about 25 -30 reboots bios resets and repairs it finally looked like it was working, did some more installation stuff, restarted, and started the damn reboot sequence over and over� Now when I run in safe mode the last line to come up is Loaded: windowssystem32driversClasspnp.sys Looks like it made it a step farther, for no reason, I really didn�t change anything except repeated attempts. Many more attempts at repairs and resets haven�t gotten any further.
View 9 Replies
View Related
Sep 11, 2012
So I decided I wanted to try Microsoft Security Essentials for some reason. I uninstalled Avast and all traces of it. I installed MSE and everything went smoothly. I noticed it was setup to automatically scan every Sun. night. I left it that way. Monday morning I wake up to the infinite reboot. Because of the aforementioned I am 95% sure it is software related, but maybe that is because I don't want to spend money on new hardware right now.
I've tried every safe mode. I've tried to load the last known good config. I tried to repair with my Win 7 disc, but it always restarts itself before I can get anything done. I also tried system restore and also reformatting with the disc, but I get no more than a minute once I've started the computer. I've also tried scheduling memory and system checks at startup but they never get a chance to run.
My system:
Win 7
i5 2.67 ghz
hitachi 500gb hd
4gb dd3
gtx 560ti
View 43 Replies
View Related
Sep 1, 2012
I got the "infinite repair start up" sequence on my laptop. I googled and tried all the fixes, but none seemed to work for me. So, I got a fresh download of Win 7 (it's the free trial version) and am trying to install it.It seems to go fine, but then it says it cannot find the drivers for my dvd drive. I have the Dell drivers disk (not sure if the driver is even on there... never used it before) but it doesn't seem to find anything on it.
[code]....
View 6 Replies
View Related
Feb 14, 2013
my acer aspire 5535 laptop wont boot up at all even in safe mode it just keeps running the repair loop ive tried dskchk several times using different swiches to no avail ive tried the regback tutorial again no joy.I have noticed an anomaly thow when you let windows start and automatically go to start up repair the message says windows cannot repair this computer automatically .however if you press f8 and go to the repair screen then start up repair the message comes up saying startup repair cant find anything wrong with this computer.When you look at results it says windows os booted correctly
View 3 Replies
View Related
Dec 7, 2012
I'm not sure if I am in the right category but I'll just leave it here. I downloaded a corrupt file and my computer went crazy and so I shut it off and now it keeps going through the start up repair over and over. It'll say that it's rapaired and it will restart but then it will go straight back into doing it over and over. Can someone please answer this quickly because finals are next week and I have unfinished papers and websites and animations on my computer that need to be handed in pronto.
View 9 Replies
View Related
Dec 14, 2012
I have the Asus A55A EB71 (although I can't find it on Asus website itself, probably known under another name) So long story short, this is what I did that is causing my current problem:
F8 Boot, repair mode, restarted during the middle of "loading files" (yes, I know, bad idea) If I try the safe modes or repair, it says windows is loading files, then it says to repair etc etc (recommended), and start windows normally. Start windows normally sends me to Reboot and select rproper boot device.
Anyway, I get the reboot and select proper boot device screen. I checked BIOS, boot option 1 = "windows boot manager...", #2 = dvd, so not boot option priority issue I tried F9 Boot (to do this: URL], however, only option is Windows 7, and windows memory diagnostic.
The laptop did not come with a recovery disk, nor did I make one. I had a system restore file on an external hard drive, but I just formatted the drive today for a Mac thinking, "hey, I never have those problems, I'll just make a system restore when I get home."
What can I do? It's a relatively new laptop so i can factory reinstall, although I dont know how. I tried this: [URL], but there is no recover windows to entire HD option.
View 15 Replies
View Related
Nov 16, 2011
I couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies
View Related
Nov 4, 2009
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
View 9 Replies
View Related
Mar 28, 2012
I just tried sfc/scannow and I got the following message: There is a system repair pending which requires a reboot to complete. Restart windows and try sfc again.I'm thinking this repair pending is from the chldsk/r I completed previously. This is great, except when I reboot, the repair does not startup and the system just goes back to the Windows Error Recovery screen I had earlier. How do I get the repair to complete?
View 6 Replies
View Related
Mar 8, 2012
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
View 3 Replies
View Related
Feb 15, 2013
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies
View Related
May 8, 2011
The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
View 3 Replies
View Related
Nov 10, 2011
I have an Intel Quad core system giving me some headaches. 4 memory slots on the motherboard - 2x2GB + 2x1GB sticks. System cold boot speed is fine, but on a reboot it takes about 300 seconds to go from the "Starting windows" animation to the desktop. This is a clean install of Windows 7 x64. Memory tests OK - (PC Check, Windows Memory Diagnostics, Memtest86)
View 9 Replies
View Related
Feb 24, 2011
I've just built my own PC and installed Windows 7 64-bit. It was working great for the first few weeks, then about a week ago, after some Windows updates, the computer refused to shut down. When pressing the shut down button, which is set to shut down not reboot, it would reboot instead. I decided to just reinstall Windows 7 completely. It worked.Yesterday after recent updates to Win7 the computer once again stopped shutting down. Every time I try, it will begin to shut down and then will immediately reboot itself. This time the complete Win7 reinstall did nothing.
1. total reinstall (worked first time, not second time)
2. reinstall with no updates, choosing non-security and non-critical updates
3. system restore to the point of first install --still no good.
4. gone through windows itself and had it check for anything damaged and fix it
View 17 Replies
View Related
Jul 20, 2012
For a few months now, whenever I boot up it seems that all of the USB ports on the computer, including the network adapter just simply won't work until I've reinstalled. What's weird is this is true for all but one USB port, which is located on the back of the case. I've kept my mouse plugged in there so whenever I need to restart I can easily reinstall the drivers... And really it's not that big of a problem or anything, it's just become an annoyance at this point, you know?'ve tried updating the drivers in question and it says they're up to date.I'm not sure what else I can do past that since I'm not that knowledgeable in this area. The drivers that are experiencing the problem I described are; "Realtek PCIe GBE Family Controller" -and- "Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26"Another thing I guess I'd like to ask about since I'm making this post... I have a USB port on the front end of the PC which won't work whatsoever even after reinstalling drivers. We had a power outage a while back, and I thought maybe it could have fried it or something
View 9 Replies
View Related
Dec 3, 2011
I have just performed a full system restore on my Dell XPS L501 with Windows 7, but now it won't boot up. I get a 'Bootmgr is missing' message. I think I might have to try re-installing Windows but did not receive a disk with the PC. Anything else I should try?
View 1 Replies
View Related
Oct 20, 2011
with a little internet problem on a Windows 7 professional system.
Essentially, last week after an Update, I could not get back onto my driver (the hard drive is partitioned so I have a section and my other half has another). A system restore to the previous day has allowed me to access the computer again, but the internet is gone.
The OH can use the internet on the same computer (I am on his half now), so there is no fault with the modem, the cable or the internet connection per se. We have tried to restore the internet using various manual methods, but can get no further than the SetUp. At this point we get a message Error 711, and reports that the Remote Access Auto Connection Manager is not responding.
I have tried to fix this today, but cannot get onto the services to fix it - when I click on Services and go to 'run as admin', the message appears "Class not Registered". I have also had this message when trying to connect the internet by writing a manual IP address, and when looking for the IP drivers.
The OH is threatening F*kdisk which would mean I lose everything on the drive, but I do not have another solution.
View 9 Replies
View Related
Aug 26, 2012
My HP Presario CQ62 acts strangely since last night. After playing videos and audios for a while, suddenly there is no audio when playing videos or audio clips and the system freezes and I turned it off. I just updated iTunes to the latest version and was syncing with the iPod. I also updated Avast free anti-virus to the latest version about 2 days ago. That was last night. This morning, I also experienced the same thing. I was also syncing using iTunes. I was using Chrome and after I closed it it would not start again. Then the system reboot itself. Recently I also use msconfig to uncheck HPMSGSVC.exe (and a few other options) because it was taking so much time to boot up.
What is causing this suddenly no audio problem, among others, I described. Windows froze again after I typed the last sentence. I shutdown and restart windows. This happens after 1-3 hours of use since last night.
View 2 Replies
View Related
Oct 22, 2009
I downloaded the student version of Windows 7. I'm running Vista business so I had to do a clean install which went fine, it went through the first two steps fine (I forget the names) and then says it needs to restart to finish.
It restarts, goes to the new windows start up screen (which looks nice), that screen goes away and then shows the cursor for about 5 seconds and then the system restarts. It'll do this for hours. I also have a DVD version of it, tried that, same story. I've tried updating drivers, unplugging everything, and hitting F8, nothing worked. Any other ideas?
View 7 Replies
View Related
Feb 10, 2012
my issue is with windows 7 giving me an error message on boot up. I started having a google redirect issue on my dell laptop the other day. I though I had taken care of it with malwarebites, but suddenly while I am surfing the net the screen goes completley black and I am faced with a blue screen of death. Can't start anything. Safe mode, system repair, and system restore either freeze or get the same blue screen of death.I finally end up using the Dell system local backup that is a preloaded recovery tool on their computers, and the two burned recovery discs I made with it when I first got the pc. Using this I restore the PC to its factory setting wiping out my old files and partitions. It works! and I go through setting up windows like the first time. It loads up and is working fine. I load on some anti spyware programs scan my computer, set up the internet, and start updating windows.Once I dowload my updates and restart my computer the computer will not boot windows. I get a error that goes something like this Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible.I cant get safe mode to work. Basically my only option is to stick my recovery disk back in and repeat a factory fresh recovery and that gets my computer back working, but every time I turn it off I get the boot error. It is frustrating because I can get it to work fine otherwise. Right now I am just putting my laptop to sleep mode but I would like to be able to turn it it off without recovering windows each time!If you have any ideas that could help me that would be great. I am thinking there is some sort of lingering software/hardware incompatibility or the virus/malware altered something to make the boot up process change. I feel like there is something I could probably do or run in windows to fix this. For awhile I was thinking my hard drive was messed up, but if that was the case I would assume I would not be able to recover windows and load anti virus software on it and have everything be normal, only to not have windows restart.
View 6 Replies
View Related
May 6, 2011
yesterday it crashed when it restarted it went into system repair and everytime i restarted it went into the system repair not sure if this is relivant but i get a dos windown come up with drvload.exe so i did a hdd factory restore thinking this would clear the problem but it hasnt, now im still getting a system repair everytime i do the mircosoft updates when i restart, plus i cant open hardly any programes like firefox, add and remove programmes.Im now running a harddrive check to see if i have any bad sectors within it, have also run mcfee scan which showed no viruses.
View 6 Replies
View Related
May 9, 2011
Win 7 no boot to windows or safe mode Startup cannot repair or System Restore Drive has changed fron C to D, PC was showing black screen 2 options Start windows normally or Launch Start up repair 1 beepthen launches startup repair.checkingsystem, then cannot repair and send info about this problem.
View 5 Replies
View Related
Apr 12, 2011
yesterday I was enjoying a match of league of legends on my computer and it completely froze up on me. I had no option but to give it the hard shutoff, so I held down the power button. Upon starting my computer back up, I was brought into system repair. It tried to repair and then said it could not be repaired, and so I restarted it. It then said it went into repairing once again and said it may take up to an hour. A minute later it said the errors were fixed, and restarted the system for me. It then continued to do that and has been doing that every time I restart it.I tried logging in to safe mode but it just brought me into system repair.I tried to restore to an earlier point but the restore failed.I tried using a Windows 7 Reinstall disk and had odd results. The first time it said a file was missing during the expanding files. The Second time it got to completing install and then said the disk was missing files to complete and to contact the disk manufacturer. I'm currently running it one more time to see if I can get it to work.All I have plugged in is the mouse, the keyboard, and the monitor.
View 1 Replies
View Related
Jun 26, 2011
my computer keeps going to system repair and it wont let me go into safe mode or do system restore. how do i fix this?
View 1 Replies
View Related
Jan 19, 2012
I recently had a problem with reformatting a partition. It was solved by relocating the pagefile.sys.
Now whenever I boot upon login it says the system has made a temp pagefile system. I try adjusting the size of the pagefile system to much more, less, or equal to amount of ram (4gb). Doesn't seem to solve it.
dropbox has stopped working too; it seems like that malfunction may be related to the pagefilesys
View 3 Replies
View Related
Aug 29, 2009
I have Installed Windows 7 Ultimate x64 RTM 7600 and everytime i reboot my computer it asks for a system disk... I have to Put the Windows 7 disk in the dvd drive and reboot for it to load.. anybody know what may be causing this?
Also when i reboot i ahve to disable and re-enable my Network adapter in order to connect to the internet..
View 9 Replies
View Related
Jul 5, 2010
is there an easy way to reboot into a different operating system thats on a different harddrive from the desktop?
View 4 Replies
View Related
