I have Installed Windows 7 Ultimate x64 RTM 7600 and everytime i reboot my computer it asks for a system disk... I have to Put the Windows 7 disk in the dvd drive and reboot for it to load.. anybody know what may be causing this?
Also when i reboot i ahve to disable and re-enable my Network adapter in order to connect to the internet..
I have been having this problem for about 2 weeks. I have tried disabling various services but have not had any luck narrowing it down. I have attached the Dump & System files. I am unable to create a System Health Report since it cannot be created in Safe Mode and my computer locks up before I can create it in normal windows.
My computer is a Toshiba Satellite L675D Laptop with Windows 7 Home Premium 64 bit w/ SP1 OEM. It's about 1.5 years old.
everytime I create a restore point on windows 7, it disappears upon a reboot.
View 6 Replies View Relatedwhenever i boot my pc i starts making sounds for like 15 secs and later asks me t choose my operating. this started wheni removed my battery for like 3 weeks and then inserted it back. am using acer mini.
View 5 Replies View RelatedMy Windows 7 32 bit laptop has crashed. I do not have a instalation disc and like a dumb fool I never made a recovery disc. Can I make a recovery disc on a 64 bit Windows 7 that a relative of mine has. Can I just download it from a link and burn it onto a blankd dvd?
View 2 Replies View Relatedi m suffering from the problem every time I restart my lappie I have to change my default gateway IP in my Network and sharing settings.
It is vry irritating windows saves everthing but not my default gateway IP i had dell studio 1558 with windows 7 home premium 64bit
I wanted to make a new partition on my hp laptop on the only disc it as.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly.As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd
View 4 Replies View RelatedWhen I first use my Drive E and insert a disc it works fine. When insert a second disc later I keep getting the information from the first disc and cannot use Drive E for another disc until I reboot. I do have another drive (F) but would really like to resolve this problem.
View 8 Replies View RelatedToday I booted up my computer and got a screen saying something went seriously wrong with my computer and that I should repair it from an installation disk. I load up windows onto a USB, boot it and click the repair option. It's been about half an hour and nothing has shown up. Is it still loading or perhaps something is very wrong with my PC?
View 2 Replies View RelatedI recently purchased a Lenovo and figured that I should obviously get the Windows updates for it. I went to download the updates and all went well, that was until it tried to configure them with my computer. Everytime I turn on my computer now, I have to wait for it to try to configure updates. It gets to 15% completed, and then it suddenly says that the updates failed to configure, so the computer restarts, and then I have to wait for it to start up AGAIN. I've tried this at least 8-9 times and get the same result.
View 1 Replies View RelatedMy daughter's PC, Windows 7 32 bit, all of a sudden started running chkdsk everytime it is booted up. How do we stop this behavior?Her antivirus is up to date and very efficient so we don't know what the computer is checking for.
View 4 Replies View RelatedMy computer hangs every time I choose a new window. Can take upto a minute or two before it shows. No errors or blue screen. This happens in internet explorer and mozilla firefoz. Dell inspiron window 7 home, 64 bit.
View 1 Replies View RelatedEvery time I shut down my laptop, there would always be the notice "installing update 1 of 1". This has been happening for a while and I'm wondering what's going on.
In addition, many random files have been created in the Local C drive as shown: Corrupted Image removed - please re- upload
I don't know if I should just delete them but anyway, I chose not to just in case.
i kept having to set the screen resolution everytime I open my computer
View 1 Replies View RelatedI dont have recovery disk for my asus eee pc x101h
View 2 Replies View RelatedI have a computer which, every time it's restarted or turned on, the network icon always had that exclamation point, and it can't connect to the internet. All it needs to do is an IP config release/renew, then disable then re-enable the adapter, and it fixes itself. But upon reboot/restart, it happened again!
View 3 Replies View Relatedhow will i reboot my pc without a disc gateway one zx6000 windows 7
View 1 Replies View RelatedI'm running Win 7/64 Home Premium on my media PC with 7 USB drives, all connected via a powered hub.
Whenever I reboot (warm or cold), the sharing permissions are lost, generally to all, although every so often one of the WD drives will maintain it (the Seagate ones always lose them). I've tried using different ports to no avail. I've changed the properties of the drives so that I am the owner (as an Administrator). That doesn't help either.
I've read that Windows keeps a list of dynamic shares (or something like that) and that this behavior is by design as drives can be disconnected when the PC is not running. Is this true? I never had a problem with Vista, so this is definitely a Win 7 thing.
Lastnight I was working on some documents and my computer randomly restarted. Upon restarting I get the message reboot and select proper boot device. This is the first time I have seen it and don't now what to do. I don't have the windows 7 installation disc or any repair discs. I also am unable to press F9 key for system repair.
View 4 Replies View RelatedI want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
I have an Intel Quad core system giving me some headaches. 4 memory slots on the motherboard - 2x2GB + 2x1GB sticks. System cold boot speed is fine, but on a reboot it takes about 300 seconds to go from the "Starting windows" animation to the desktop. This is a clean install of Windows 7 x64. Memory tests OK - (PC Check, Windows Memory Diagnostics, Memtest86)
View 9 Replies View RelatedI've just built my own PC and installed Windows 7 64-bit. It was working great for the first few weeks, then about a week ago, after some Windows updates, the computer refused to shut down. When pressing the shut down button, which is set to shut down not reboot, it would reboot instead. I decided to just reinstall Windows 7 completely. It worked.Yesterday after recent updates to Win7 the computer once again stopped shutting down. Every time I try, it will begin to shut down and then will immediately reboot itself. This time the complete Win7 reinstall did nothing.
1. total reinstall (worked first time, not second time)
2. reinstall with no updates, choosing non-security and non-critical updates
3. system restore to the point of first install --still no good.
4. gone through windows itself and had it check for anything damaged and fix it
For a few months now, whenever I boot up it seems that all of the USB ports on the computer, including the network adapter just simply won't work until I've reinstalled. What's weird is this is true for all but one USB port, which is located on the back of the case. I've kept my mouse plugged in there so whenever I need to restart I can easily reinstall the drivers... And really it's not that big of a problem or anything, it's just become an annoyance at this point, you know?'ve tried updating the drivers in question and it says they're up to date.I'm not sure what else I can do past that since I'm not that knowledgeable in this area. The drivers that are experiencing the problem I described are; "Realtek PCIe GBE Family Controller" -and- "Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26"Another thing I guess I'd like to ask about since I'm making this post... I have a USB port on the front end of the PC which won't work whatsoever even after reinstalling drivers. We had a power outage a while back, and I thought maybe it could have fried it or something
View 9 Replies View RelatedI have just performed a full system restore on my Dell XPS L501 with Windows 7, but now it won't boot up. I get a 'Bootmgr is missing' message. I think I might have to try re-installing Windows but did not receive a disk with the PC. Anything else I should try?
View 1 Replies View RelatedI personally still use xp pro x32 so I'm not fully up to speed with win 7.The beast, hereinafter called 'it' has started going into infinite boot ups and trying various fixes (including restoring the hives) have been unsuccessful and the original hives put back. It was originally a Vista OS and was upgraded to Windows 7. Before it went sick, AVG10 reported trojan.Redbrowser. Despite providing instructions to remove, my friend reported that the trojan had stopped doing whatever it was it did. (Hmm, I don't think so) Anyway a few days later AVG10 apparently disappeared and stopped scanning. The infinite reboot started and 'it' is now in my hands.
Won't boot 'Last known good ...'
Won't boot in safe mode
Won't boot to safe mode command prompt
Tried system repair (auto) - both from it and from Windows 7 cd - same result 2-iterations get me to login screen, leaving alone or logging in. Same result - reboot Using recovery options - system restore - attempting repairs gives unknown Bugcheck f4 params 0x3, 0x84c81c48, 0x84c81db4, 0x8201bd60 clicking finish gives a reboot but cancel gets me to 'choose a recovery tool'Using system restore gives unsuccessful - failed to extract file C:windows$Nt..from restore point.There are 3-other System Image restore points in Backups , but get message 'selected backup not found'. The backup sets are on another partition on same disk and can be seen from command prompt provided in the recovery options but I can't find a way to tell 'it' to look there.I've tried both rstrui and wbadmin from the command prompt but still can't get them to see the backups - just 'not found' errors.
with a little internet problem on a Windows 7 professional system.
Essentially, last week after an Update, I could not get back onto my driver (the hard drive is partitioned so I have a section and my other half has another). A system restore to the previous day has allowed me to access the computer again, but the internet is gone.
The OH can use the internet on the same computer (I am on his half now), so there is no fault with the modem, the cable or the internet connection per se. We have tried to restore the internet using various manual methods, but can get no further than the SetUp. At this point we get a message Error 711, and reports that the Remote Access Auto Connection Manager is not responding.
I have tried to fix this today, but cannot get onto the services to fix it - when I click on Services and go to 'run as admin', the message appears "Class not Registered". I have also had this message when trying to connect the internet by writing a manual IP address, and when looking for the IP drivers.
The OH is threatening F*kdisk which would mean I lose everything on the drive, but I do not have another solution.
My HP Presario CQ62 acts strangely since last night. After playing videos and audios for a while, suddenly there is no audio when playing videos or audio clips and the system freezes and I turned it off. I just updated iTunes to the latest version and was syncing with the iPod. I also updated Avast free anti-virus to the latest version about 2 days ago. That was last night. This morning, I also experienced the same thing. I was also syncing using iTunes. I was using Chrome and after I closed it it would not start again. Then the system reboot itself. Recently I also use msconfig to uncheck HPMSGSVC.exe (and a few other options) because it was taking so much time to boot up.
What is causing this suddenly no audio problem, among others, I described. Windows froze again after I typed the last sentence. I shutdown and restart windows. This happens after 1-3 hours of use since last night.
I downloaded the student version of Windows 7. I'm running Vista business so I had to do a clean install which went fine, it went through the first two steps fine (I forget the names) and then says it needs to restart to finish.
It restarts, goes to the new windows start up screen (which looks nice), that screen goes away and then shows the cursor for about 5 seconds and then the system restarts. It'll do this for hours. I also have a DVD version of it, tried that, same story. I've tried updating drivers, unplugging everything, and hitting F8, nothing worked. Any other ideas?
How can I do a system recovery without a disc ?In my drive D , there is something called " recovery " I guess it is a partition .But when I open up recovery manager , It asked me to insert a disc .
View 5 Replies View Relatedmy issue is with windows 7 giving me an error message on boot up. I started having a google redirect issue on my dell laptop the other day. I though I had taken care of it with malwarebites, but suddenly while I am surfing the net the screen goes completley black and I am faced with a blue screen of death. Can't start anything. Safe mode, system repair, and system restore either freeze or get the same blue screen of death.I finally end up using the Dell system local backup that is a preloaded recovery tool on their computers, and the two burned recovery discs I made with it when I first got the pc. Using this I restore the PC to its factory setting wiping out my old files and partitions. It works! and I go through setting up windows like the first time. It loads up and is working fine. I load on some anti spyware programs scan my computer, set up the internet, and start updating windows.Once I dowload my updates and restart my computer the computer will not boot windows. I get a error that goes something like this Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible.I cant get safe mode to work. Basically my only option is to stick my recovery disk back in and repeat a factory fresh recovery and that gets my computer back working, but every time I turn it off I get the boot error. It is frustrating because I can get it to work fine otherwise. Right now I am just putting my laptop to sleep mode but I would like to be able to turn it it off without recovering windows each time!If you have any ideas that could help me that would be great. I am thinking there is some sort of lingering software/hardware incompatibility or the virus/malware altered something to make the boot up process change. I feel like there is something I could probably do or run in windows to fix this. For awhile I was thinking my hard drive was messed up, but if that was the case I would assume I would not be able to recover windows and load anti virus software on it and have everything be normal, only to not have windows restart.
I had an old P4 system that the PSU went out on, so while I was at the store getting a new PSU, I picked up a copy of Win7 also. Put the PSU and Win7 in and the next day, the Motherboard died. Went and bought a new i-core motherboard, processor, memory and video card and put it together using two drives. The one Sata drive from the old system is a 1T that has the Win7 from the other system on it along with about 75 movies, 500 pictures and 1500 songs. I used a 250 gig SATA to load the Win7 onto the new system. So now the new system is running off the 250gig and all my files are on the 1T drive along with the old Win7 folder. I want to delet the old Win7 folder but it won't let me giving me a message saying I need permission from a trusted installer to remove these files.
View 2 Replies View Related