In my Program Folder, I have a TEMP Folder (Empty). When I right click and try to delete the folder, I enter a loop with no end. The Pop Window display like it is trying to remove the whole Programs Folder.
View 5 RepliesYesterday I was installing XP on one of partitions I made for it,because I had problems recording stereo tracks for studio on Windows 7( in my previous encounters like that,it worked on XP ).After installation of XP it would restart and just give Unable to load operating system and I couldn't boot in Windows 7 because as most of you probably know,XP overwrites boot section of Windows 7( but that's an easy fix with EasyBCD ).Now I tried fixing the problem with Windows 7 installation DVD and startup repair but no use,then I tried MBR tutorial and it got me to splash screen,but that's where my infinite loop started.Then I tried doing backup with command prompt as in one of tutorials here: Startup Repair Infinite Loop Recovery but no results unfortunately. Or am I going to be forced to do clean install? I temporarily installed Windows 8 Release Preview on XP partition just so I can do stuff until Windows 7 is fixed.
View 9 Replies View Relatedmy acer aspire 5535 laptop wont boot up at all even in safe mode it just keeps running the repair loop ive tried dskchk several times using different swiches to no avail ive tried the regback tutorial again no joy.I have noticed an anomaly thow when you let windows start and automatically go to start up repair the message says windows cannot repair this computer automatically .however if you press f8 and go to the repair screen then start up repair the message comes up saying startup repair cant find anything wrong with this computer.When you look at results it says windows os booted correctly
View 3 Replies View RelatedI'm not sure if I am in the right category but I'll just leave it here. I downloaded a corrupt file and my computer went crazy and so I shut it off and now it keeps going through the start up repair over and over. It'll say that it's rapaired and it will restart but then it will go straight back into doing it over and over. Can someone please answer this quickly because finals are next week and I have unfinished papers and websites and animations on my computer that need to be handed in pronto.
View 9 Replies View RelatedWhen I first booted it up, it began to do it's first time windows load, when I got a BSOD of 0x0000004E and it shut down. Upon restart I got to the point where it tells me " windows was interrupted upon installation, install will proceed after restart" it then restarts and does the same thing. If I shut it off and turn it back on I get the page on choosing to boot normal or in safe mode, but I never get the bios options, as I have the windows 7 SP1 cd that came with.
View 2 Replies View RelatedMy original os is windows 7. So today I connected a hard drive from a windows xp machine so I could transfer some files. When I powered the computer back on I got a blue screen right after the windows 7 loading screen and the computer rebooted. I then got the black screen asking if I want safe mode last known configuration or start windows normally. I chose start normally and i got bluescreen/rebooted back to this screen. I then chose last known good configuration and was bluescreen/rebooted back to the screen, this time I chose safe mode. Safe mode began to load files and then stopped at mup.sys bluescreened and rebooted. The system then tried to do the windows repair thing and I did the system restore option and rebooted, this didnt help and I put in my windows 7 installation cd hit repair and tried bootrec.exe, none of the options worked [fixmbr fixboot etc] and the system doesnt recognize that any OS are installed.
View 14 Replies View RelatedI'm building a computer myself and I can't for the life of me get windows 7 to install. Here is my configuration and what I've tried..
Motherboard: GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Rev 2.0, BIOS version �FA�
Processor: Intel Core i7 930 2.80GHz 8MB LGA 1366 L3 Quad Core Desktop Processor - BX80601930
Memory: Corsair XMS3 6GB DDR3 SDRAM Memory Module - 6GB (3 x 2GB) - 1600MHz DDR3-1600/PC3-12800 - DDR3 SDRAM 9-9-9-24 version 2.3a
Optical Drive: ASUS Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM 2MB Cache SATA 24X DVD Burner - Bulk - OEM
Power Supply: OCZ Technology GameXStream 850W ATX12V & EPS12V Power Supply
ard Drive: Western Digital Caviar Blue WD5000AAKS 500 GB - Hard Drive � Bulk
Graphics Card: GALAXY 70XKH3HS8GUX GeForce GTX 470 Graphics Card - PCI Express 2.0 x16 - 1.25 GB GDDR5 SDRAM
Operating System: Microsoft Windows 7 Home Premium 64-bit 1-Pack for System Builders � OEM
Case: Cooler Master HAF 922 RC-922M-KKN1-GP Chassis - Mid-tower - 10 Bays � Black
What I first did to install: I change the bios to boot from the Optical Drive Put the Windows 7 CD into the optical drive.Follow the on screen instructions for the windows install. Windows copies the files, extracts and installs. The system reboots. When Windows attempts to start for the first time the windows logo comes up and does its animation. The system then reboots. The screen comes up that tells me windows didn�t start properly and do I want to try safe mode, etc etc. If I do safe mode drivers scroll until it gets to disk.sys. At this point it freezes for a minute or two and reboots.
Things I�ve tried:
I have pared down to 1 stick of 2 GB of the ram
I�ve tried using both of the other sticks of ram (individually) in case I had a bad stick
I�ve tried with an older ATI PCI video card in case it was a video card compatibility issue
I�ve tried reformatting and deleting the system partition and reinstalling
I�ve tried reformatting from another working computer and reinstalling
I�ve tried many windows repairs, often it says it can�t fix it, or tries something and restarts.
Once it was �repairing disk errors� and it did that in about a minute. Didn�t work. Othertimes it gives me a failure during setup, tries to fix it, didn�t work.I�ve reset the bios to optimized I�ve tried manually changing the multiplier of the ram in the bios. fter about 25 -30 reboots bios resets and repairs it finally looked like it was working, did some more installation stuff, restarted, and started the damn reboot sequence over and over� Now when I run in safe mode the last line to come up is Loaded: windowssystem32driversClasspnp.sys Looks like it made it a step farther, for no reason, I really didn�t change anything except repeated attempts. Many more attempts at repairs and resets haven�t gotten any further.
So I decided I wanted to try Microsoft Security Essentials for some reason. I uninstalled Avast and all traces of it. I installed MSE and everything went smoothly. I noticed it was setup to automatically scan every Sun. night. I left it that way. Monday morning I wake up to the infinite reboot. Because of the aforementioned I am 95% sure it is software related, but maybe that is because I don't want to spend money on new hardware right now.
I've tried every safe mode. I've tried to load the last known good config. I tried to repair with my Win 7 disc, but it always restarts itself before I can get anything done. I also tried system restore and also reformatting with the disc, but I get no more than a minute once I've started the computer. I've also tried scheduling memory and system checks at startup but they never get a chance to run.
My system:
Win 7
i5 2.67 ghz
hitachi 500gb hd
4gb dd3
gtx 560ti
A Dell Inspiron E1705, w/ 2x2gb mem, 500 gb hd, ATI Radeon x1400 vid and Win 7.There were no Dell drivers or programs and the system BIOS was ver A01. Checking the Dell website against the Service Tag, I found 22 drivers and programs specific to the computer. Most of them ran and installed under Win 7 with no trouble. The last one was the bios flash utility program to update the bios to ver A10. The bios flashed, seemed to go ok. But on system reboot, after the initial screem about resetting the memory sticks, the computer is stuck in an infinite reboot loop.It loads the initial POST screen, completes the POST, seeks for its boot device and when it finds and starts to access the installed HD it reboots. I have reset all the bios settings to factory default settings. I have pulled the system battery and "cleared the cmos", but no joy there. I have created a bootable usb flash drive with another Dell laptop, and the computer will boot from that. I have other bootable cd's, and the computer will boot from them. I can use the bootable cd's to determine that the programs they run (freeware backup programs and a copy of bart pe) can access the installed hd,and see the files there, so the installed hd is intact. But i still can't get the computer to boot from it.My first thought was to reinstall the ver A01 bios, but it would not complete the process and remained at ver .A10. I was able to flash bios A09, and then A07, etc, all the way back to ver A04. But after that I could go back no further, A02 and A01 flash utilities returned an error message. If I found some compatible mem sticks and a smaller hd, installed them, could I reflash bios ver A02 or A01? Would that do me any good? (I have 2 x 256 mg mem sticks from a dell inspiron 5100 which I upgraded to 2x1gb, and a 40 gb 2.5in hd that also came out of the 5100, so I could use those parts in the e1705 to reflash the earlier bios)
View 7 Replies View Relatedthe only way I can accurately portray my predicament is via numbered flow chart:
1. Wake up sleeping computer, nothing happens, starts humming faster and faster, so I pull the plug.
2. Turn on computer, goes through the ASUS screen, then the mother board screen has some weird pixelation on the left scree, like some lines or something. Windows is loading....then black screen forever. do this 1 or 2 more times.
3. Go to System Repair and System Restore. Repair fails and tells me a Boot Driver is failing. Restore fails each time.
4. Hold F1, go to boot menu, hit F8, select Safe Mode. Safe Mode works, fantastic.
5. Do AVG Defrag, Disk Clean, and Disk Repair. Then restart...now I get a blue "Dumping Physical Memory" screen.
6. Go back to Safe Mode, use boot disk, tell it to un/re-install windows.
7. Come back later and find it in Phys Mem dump loop, pop it into Safe Mode again. I then see two Windows 7 OSs to choose from, pick the bottom one. Says it can't complete installation in Safe Mode, restart it normal, Phys Dump loop.
8. I do the same thing for the top Win 7 choice, same thing.
9. I've back up all my files, and have drivers/boots disks for everything I own. How do I wipe my hard drive and start fresh?
Basically what originally happened was that I tried installing windows 7 off of my hard drive and during the "completing installation" phase the computer lost power and was shut down. Turning the computer back on iIhad a screen which said something of the likes of set up is starting. From then on I was in a infinite boot loop where it would give me a set up screen and restart. I desperately needed to backup my files which I did not bother to do so.
I used my secondary desktop running vista, plugged in my other hard drive and backed up all my files successfully. I thought I would format the disk since I was done backing up all my data and I would go right on ahead and install a fresh windows 7 via the CD. I go into bios and set the windows CD to boot and I unplug my vista hard drive and leave only the formatted 1TB HD plugged in. And now I get the "BOOTMGR is missing" error. As I have read it's due to deleting everything off the hard drive including the...bootmanager.
Now with the tools that I hold (mobo with bios access, windows 7 installation CD, another hard drive with Vista). How shall I go about getting my hard drive ready to install a fresh copy of windows 7. I have the retail cd, I have another HD with vista if needed, and I have the clean hard drive which i would wish to install windows 7. I set my bios to boot via the CD first and put in the disc and let it work it's magic, I would like to point out that it still gives me a BOOTMGR error. It asks me to press a key to load from the CD and then I get the error that I know is coming.
The screen cracked on my old laptop and my insurance decided it would be cheaper to give me a new one as opposed to fixing it. The new laptop arrived today, along with the hard drive from my old one. I thought it would be simply a case of opening the new laptop up, taking out the hard drive and putting in my old one (note: I turned on the laptop with it's new hard drive first to make sure it worked ok).
However, after doing this and turning on the laptop, I am faced a message saying "Windows failed to start. A recent hardware or software change might be the cause.". I am given 2 options, Launch Startup Repair or Start Windows Normally. Clicking Start Windows Normally just brings me back to the same screen, and I've tried running the startup repair several times to no avail. Following the instructions at Startup Repair Infinite Loop Recovery also does not solve the problem.
I was trying to reinstall window 7 on my laptop i couldnt factory reboot it so i was installing it with a window's 7 set I had on my laptop but it crashed part way through and no its stuck in an infinite loop and it comes up the error of "the computer restarted unexpectedly or encountered an unexpected error. Windows installation cannon proceed. to install windows, click "OK" to restart the computer, and then restart the installation."
View 1 Replies View Relatedon March 13, the "tuesday windows update packet" started updating my system automatically. It auto downloaded the updates (which I didn't realize it was even updating) It seemed to be hanging on the shut down screen. I came into the room about 2 hours later and Windows was still shutting down (actually it was on the blue screen that says, shutting down) Not knowing that the computer updating, I shut the computer off by hitting the power button because I thought it was weird it didn't shut down 2 hours earlier. I have read other posts where people also experienced this same scenario... the update seemed to freeze the computer at shutdown.The next day I tried to boot up... and the computer would not boot to the desktop, even in Safe Mode. I tried to do a system restore, system repair, etc. to dates before March 13... even Feb. 28th... but system restore did not work.
After 5 hours of trying various entries into the command prompt... I found this one that worked.:
dism.exe /image:<drive letter>: /cleanup-image /revertpendingactions
sfc /scannow /offbootdir=<drive letter>: /offwindir=<drive letter>:Windows BUT... my problems aren't totally clear yet:
I was able to load back into the desktop with almost everything functioning properly. Once the computer loaded back up to the desktop... I checked windows update and 5 of the updates failed. So, I started to update them one by one, which they did successfully... except one. The last update on the list, which is a Windows 7 x64 critical update KB2639308... still isn't updating properly and... it causes the infinite startup loop if I try to update. I read on Microsoft Answers that several others were having the same exact problem as me... the first time they downloaded the update, it froze their computers at the shutdown screen for hours and hours, they turned off their computers and got stuck in the infinite startup loop.Also, when it goes into the infinite loop, and I run Startup Repair, the diagnostic passes all tests except it does say this: Startup repair Diagnosis and repair details:
Boot critical file h:windowssystem32
toskrl.exe is corrupt.
Repair action: File repair
Result: Failed. Error code = 0xa
[code]....
Last night i was playing a game (DmC) on my computer and my cousin came out of nowhere and unplugged everything. (it was a multi plug that was connected to my tv, monitor and computer) When i turned my pc back on: it asked me if i wanted to repair the problem; so i clicked yes. After awhile, the computer restarted, but now it can't seem to start normally anymore, all the safe mode options work, but every time i choose to start it normally; it just goes in an infinite start up loop.It shows the hp logo, then says that it's starting up, shows a black screen with the mouse symbol showing and starts that pattern all over again.
(specs)
an hp pavilion p7-1205 with a
2nd generation intel core i5-2320 processor
intel hd graphics
2 terabyte hard drive
wireless lan 802.11b/g.n
genuine windows 7 home premium
I have the Asus A55A EB71 (although I can't find it on Asus website itself, probably known under another name) So long story short, this is what I did that is causing my current problem:
F8 Boot, repair mode, restarted during the middle of "loading files" (yes, I know, bad idea) If I try the safe modes or repair, it says windows is loading files, then it says to repair etc etc (recommended), and start windows normally. Start windows normally sends me to Reboot and select rproper boot device.
Anyway, I get the reboot and select proper boot device screen. I checked BIOS, boot option 1 = "windows boot manager...", #2 = dvd, so not boot option priority issue I tried F9 Boot (to do this: URL], however, only option is Windows 7, and windows memory diagnostic.
The laptop did not come with a recovery disk, nor did I make one. I had a system restore file on an external hard drive, but I just formatted the drive today for a Mac thinking, "hey, I never have those problems, I'll just make a system restore when I get home."
What can I do? It's a relatively new laptop so i can factory reinstall, although I dont know how. I tried this: [URL], but there is no recover windows to entire HD option.
While trying to fix a problem with Java working properly, I discovered that when going to Documents and SettingusernameApp DataLocal, that the Application Data folder contains another Application Data folder, and it another, then another, etc.Each Application Data folder has a shortcut arrow marking it. When I open the Properties for the first one, and then select the Previous Versions tab, it displays a list of Application Data folders with a variety of datesWhen reading the help, it says that the previous versions are created by either System Restore or Backup. I have used System Restore only once, but I have never setup Backup at all.Since I have fixed the Java problem in both IE8 and Firefox, I thought that I would try the same with Opera by reinstalling it on itself, but the installer wasn't able to see the source file, and when using Windows Explorer I wasn't eitherPerhaps the only solution is a fresh clean install of the OS, but I'm not anxious to do so. Since it's not clear what caused the problem that exists, the new install may end up the same way.
View 9 Replies View RelatedI got the "infinite repair start up" sequence on my laptop. I googled and tried all the fixes, but none seemed to work for me. So, I got a fresh download of Win 7 (it's the free trial version) and am trying to install it.It seems to go fine, but then it says it cannot find the drivers for my dvd drive. I have the Dell drivers disk (not sure if the driver is even on there... never used it before) but it doesn't seem to find anything on it.
[code]....
I personally still use xp pro x32 so I'm not fully up to speed with win 7.The beast, hereinafter called 'it' has started going into infinite boot ups and trying various fixes (including restoring the hives) have been unsuccessful and the original hives put back. It was originally a Vista OS and was upgraded to Windows 7. Before it went sick, AVG10 reported trojan.Redbrowser. Despite providing instructions to remove, my friend reported that the trojan had stopped doing whatever it was it did. (Hmm, I don't think so) Anyway a few days later AVG10 apparently disappeared and stopped scanning. The infinite reboot started and 'it' is now in my hands.
Won't boot 'Last known good ...'
Won't boot in safe mode
Won't boot to safe mode command prompt
Tried system repair (auto) - both from it and from Windows 7 cd - same result 2-iterations get me to login screen, leaving alone or logging in. Same result - reboot Using recovery options - system restore - attempting repairs gives unknown Bugcheck f4 params 0x3, 0x84c81c48, 0x84c81db4, 0x8201bd60 clicking finish gives a reboot but cancel gets me to 'choose a recovery tool'Using system restore gives unsuccessful - failed to extract file C:windows$Nt..from restore point.There are 3-other System Image restore points in Backups , but get message 'selected backup not found'. The backup sets are on another partition on same disk and can be seen from command prompt provided in the recovery options but I can't find a way to tell 'it' to look there.I've tried both rstrui and wbadmin from the command prompt but still can't get them to see the backups - just 'not found' errors.
Anyway, I seem to have a folder that goes on forever.Windows.old was backup but there's nothing else in that folder.I tried moving a very deep child folder out and going through that. No luck. So now I just have a recurring DocumentsDocuments etc on my HD.I looked through all this. Tried running CHKDSK, tried deleting it in safe mode, on Linux, and using scripts and stuff I found on the web. Something to do with Robocopy.
View 9 Replies View RelatedIm having HCL laptop which is infiniti LX Powerlite 9100EP.. And the Si no is 9083A1108487. Bt Im very sad to inform you that the webcam is not working on it when i change the OS to Windows 7... The driver CD only contain the drivers for XP and Vista, Im very disappoined about this problam. also the hot keys are not working.
View 4 Replies View RelatedHere is my laptop info:
System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: AMD Athlon(tm) II P320 Dual-Core Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 3834 Mb
Graphics Card: ATI Mobility Radeon HD 4200 Series, 256 Mb
Hard Drives: C: Total - 290686 MB, Free - 122376 MB;
Motherboard: Sony Corporation, VAIO, N/A, N/A
Antivirus: Trend Micro Internet Security Pro, Not Updated
My laptop recently shutdown due to no power, when I restarted i was able to get to the main screen, but then i couldn't go any further...kept getting the infinite twirling circle. Am able to start in safe mode, where i ran superanyispyware, trend micro and malwarebytes full scan for each and all came back clean. my daughter uses this sometimes and downloads some things so am hoping it hasn't screwed anything up.
it gets to blue windows screen just after windows loading files with black screen and just sits their with blue windows background and mouse in middle.i also only have hard wired USB keyboard connected
first off my mother board is a gigabyte ma790x-ds4
ram is 2x2GB of DDR2 XMS2 800 corsair (4G)
hdd is 1tb Seagate baracuda ( i also have 3 other hdd's,although are disconnected for install)
gfx card is raedon hd 6770
processor is phenom 9550 quadcore
psu: Xtreme Pro 650W gold edition.
i have also disabled legacy A floppy drive support as i have seen this giving other people with the exact same problems difficulties,i have also tried removing one ram stick and swapping it ect,also i did a memtest on the ram it passed.as for the hard drive i ran sea-gate diagnostics iso, and scanned it also it passed.i have tried running with different hdds the only thing i can think of now is the IDE LG dvd drive i have... Or the Processor or MB
Im not sure if this is in the right category, but I think it could be Windows 7 related.My Powersupply died the other day so I purchased a new one and all was fine, except when I shutdown it either freezes or carries on for what seems like forever.The only thing is that on bootup my DVD Drive and SSD have changed ports so my dvd drive is now device00 and my SSD001.
View 1 Replies View RelatedI have been following the progress of Windows 7 through beta stages. I currently operate on Windows XP SP3 which runs great, however Ive very recently decided to go for WIndows 7 beta. I completely backed up all my information, booted from DVD, formatted and then started to install.
It copies/ expands all the files to 100%, then does a normal restart, It then comes up with starting windows> registering entries etc, the carries on finalising the install only to reboot itself?
After the reboot it gives me the windows recovery screen. If it tries to boot up it just goes into a reboot loop. I am sooo confused.
The thing is I would say I know my way around PC software and Hardware very well. I have tried different BIOS settings, Optimising defaults, Load-Fail Safe Defaults, Creating New Partitions etc.
Recently, I was on my computer (A Toshiba Satellite L305D-S5974. Approx 2.5 years old) when it started to shut down with the famous blue error screen. As annoying as this was, it wasn't a big deal. No, the big deal started when my computer started acting up. It took longer and longer for it to boot to the desktop, sometimes even a half hour because I had to keep manually turning it off in on in order to get a response. Now my computer won't even go past the "Starting Windows" screen.
View 1 Replies View RelatedOk I have a Dell Inspiron N7110. I kept getting the blue screen of death , ran all the registry cleaners,virus checkers, malware fixers I had, nothing ever showed up. all came back clean. but i still got the blue screen of death.. I even ran Combo fix to no avail. decided to do a Dell system backup restore. Since then I am stuck in a start up loop. I cant even boot from my cd drive succesfully now.Called Dell they ran the typical tests, ( ones I already did) and found nothing wrong with it, told me its not hardware issue that my warranty covers sent me to software issue department. ran the tests again. and he determined he can fix it but its not covered.I could buy their warranty for $250 which will cover me for a year for any software problems.. or pay $150 for the one time help that he could fix it but would not tell me what was wrong with it. I asked for the OS disk to be sent to me so I could try to do a new install from disk.. he said he could but it wouldnt help me so he wont. I am sickened by this customer support its obviously an issue with their backup crap.. I have a win 7 disk from my sons computer and I can't even run it as when I choose boot from CD it still goes right to start up repair so I can even do that.
View 14 Replies View RelatedEvery time I shutdown I get the same updates occurring. It seems to have got in a loop.
View 14 Replies View RelatedThe problem is minor and it's just a bit of an annoyance I've been dealing with from time to time.[CODE]Basically, If I were to I put my computer to sleep(using the sleep function, not hibernate) and try to wake it up within a few seconds, the computer would go into an automatic reboot loop that would continue to boot, shut down, boot, shut down until I turn off the PSU completely. I'm trying to figure out which component might be causing this problem, if any. I've updated my bios, drivers, and ran memtest but nothing seemed out of the ordinary and it didn't fix the problem.
View 2 Replies View RelatedI have had my computer for around a year now and it has come pre installed with windows 7. it has recently stated going to the windows start up repair. it goes trying to find a problem then it say windows is unable to locate the issue or something like that. i am by no means a computer wiz but i have tried restoring from a previous date but it say that file is corrupt i am also unable to start in safe mode i have looked around for a few days now on the internet to come up with a solution but with no success
View 1 Replies View RelatedI was trying to remove some Malware and trojans on my Grandmas computer and sort of crashed it. I was using iObit and I remember seeing something about a rootkit something or another and boot.img file and I did not remove the file as it had the boot.img file, and thats kind of an important file. Anyways after trying to restore and completely reformatting the rd drive, I've had no luck getting the computer past the Windows Splash screen without getting restart windows normally or windows repair options.
View 8 Replies View Related