First time building a PC, trying to install Windows on my Crucial M4 via USB (don't have a disk drive...) and I get stuck on the "setup is starting" screen. If I try to boot with my older HDD that has Windows installed on it, I get a BSOD with error 7B.
View 5 RepliesI am not trying to install Windows 7, it came on my computer and has been working fine for over a year now. I restarted my computer a few days ago (after it had been working just fine) and now it will not load past the "Setup is Starting Services" screen. I keep getting the error message "Install Windos: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, then restart the installation." I cannot figure out why it is mentioning anything about installing windows when it came on the computer and has been working until now. I have hit "ok" and it does nothing but come back to the same stuck point. I do not have a disk for this computer as it never came with one. It is a Toshiba Satellite L455D.
View 4 Replies View Relatedcurrently using home premium 32bit but got pro upgrade 64 bit so had to do the custom install from booting with the disk I choose the language, keyboard layout etc, choose custom install, pick the hard drive and it goes to the installing screen.
When part 2 of the install screen is almost done it said installation will continue after the computer restarts. After it restarts, it just stays on the "starting windows" screen and the windows logo never shows. It wa son there for hours. I restarted by pressing the restart button and it continued back on the step 2 and them same thing, restart and then continue later but now the screen is just stuck on the "starting windows" screen.
I turned on my computer and i got a black screen saying "windows error recovery" I clicked on "start windows normally" and the logo starts to load. Then a black screen comes up saying "setup is starting services" and a pop-up titled "Install Windows" reads: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "ok" restart computer and then restart the installation. I press ok, and the computer restarts normally but then it stays stuck at the setup is starting services screen, with the Install windows pop-up.
View 9 Replies View Relatedmy computer crash while rebooting it and every time i try to turn it on it always say "setup is starting services" and it will say to restart it and i did restart it but it always go back to the setup starting services and just ask my to turn it off again. what should i do?
View 1 Replies View Relatedmy toshiba laptop is stuck at setup is starting services
View 3 Replies View RelatedI recently had some problems with my computer and I ended up restoring the computer to its original factory settings. I chose the option of restoring it while keeping user files and what not. Anyways everything was going well up to this point. The screen has been stuck on "Setup is starting up services" (with that loading bar underneath the text) all night.
I'm pretty sure I did everything right. I unplugged everything, except the keyboard, monitor, and the mouse. I did not insert the Windows 7 recovery disc, but I was under the impression that I didn't need them for what I was doing. Do I just manually shut the computer down? Is there something on the keyboard that should abort the process? My computer is a Gateway and I'm using Windows 7.
I am trying to install Windows 7 through USB in my Dell studio 1555 Laptop. Every time it gets stuck at "setup is starting".I have already disabled all other boot options except USB. There is no floppy drive option.I have gone through more or less every post related to this problem , but the common solution that is to remove all the USB, Firewire etc. attachments. It does not work in my case as I am installing from USB.
View 2 Replies View RelatedSo one evening my laptop randomly restarted itself and upon logging back in I found that I could not run almost any of my programs (.exe files). I tried checking for anything unusual in the registry but found nothing. In task manager when I clicked a program or attempted to run it in various ways I would see it pop up for a second before it got killed.
Finding no way of fixing it online I decided I would attempt the factory restore option that comes with the laptop in the system recovery that places all your documents in a C:Backup file. But nearing the end of this an error came up saying 'setup is starting services', which says to restart the computer to continue. But I can no longer get it past this screen. I've tried rebooting it in safe mode as well.
My computer is stuck on the mess that says : Setup is starting servies. wont do anything.I can shut it down but wen i turn it back on its on the screen again.
View 4 Replies View RelatedI have a gateway desktop with the windows 7 it is stuck on Saying setup is starting services, I do not have my origional windows 7 setup disk.What do I need to do to get my computer up and running again.
View 1 Replies View RelatedDoing a Normal startup, or booting from the Windows 7 cd it will get so far as the Starting Windows screen, the Microsoft copy-write shows up briefly greyed out some, and just sits there. In Safe Mode, it loads everything seemingly, lastly avgidsha.sys, then sits on Please wait...I have narrowed it down to hot the HDD or memory. I've put another HDD with Windows 7 on it, getting the same results. The MemTest 86+ cd actually loads and runs, came up 100% with no errors. Other suggestions that I have found use bootable CDs that want to start Windows first.The Windows 7 CD, Windows Defender Offline, Windows Recovery disk all get stuck at the same place as the HDD, the Starting Windows screen
View 8 Replies View RelatedWhen ever I turn my computer on it is always stuck on the Starting Windows screen and when I try and do it in safe mode it works but was I am signed in all that shows up is a black screen with Safe Mode in each corner. I have also tried start up repair but it says it can not find a problem or it will just continually search for a problem (waited 4 hours then I just turned it off)
View 7 Replies View RelatedI recently upgraded my computers power supply and graphics card to brand new ones. When I oot my computer up, it is now stuck on "windows is starting" screen. When I try to boot in any of the safe modes, I load up to atipcie.sys then my computer freezes and never continues to load the rest of safe mode. When I click repair computer, I get stuck at the Blue windows screen, and as soon as it starts up a cmd box pops up then quickly closes before I could even read it. I also tried loading last working configuration but no luck. Even when I load boot recovery mode, a cmd box comes up quick then closes and continues to be stuck.
View 8 Replies View RelatedI purchased my laptop in January and I'm not really sure what happened, I must have been struck by a pretty bad virus or something because I had a lot of protection and ran regular scans. But anyway, one day I booted up my computer and it said error recovery or something a prompted me to repair my pc but I choose start windows normally, and it loaded normally but just before it could get to the login screen a blue screen error flashed for a split second then my laptop restarted and took me to the error screen again. when I try repair my computer, it takes me tow blank lie screen,ole the login screen, with a cursor in the middle, but no dialog box. I left this running for up to 3 days, so it's definitely not just loading. so I decided my computer is pretty much screwed, and searched for my installation disc it came with. (windows was already preinstalled so I'd never used it before. on startup I pressed f12 and booted from cd rom, then it said press any key and took me to a loading screen, which took about 5 minutes and then to the installation screen. I said my language is English, choose uk English etc. then it says install now or repair your computer. when I click the repair option, I am taken to the same blank blue screen from before. when I press install it says setup is starting... and the loading cursor is spinning, so I know it's not frozen. I left it for half an hour, tried again, and this time left it for 11 hours, but still no setup has started. there can't be anything wrong with my disc, I'd never taken it out of the packet before, and I was very careful not to scratch it. it's a dell operating system windows 7 disc for if you need to reinstall windows on your preinstalled pc.
View 1 Replies View RelatedI recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:
- Formatted a brand new 4GB USB drive to FAT32
- Downloaded Windows 7 ISO (I have a key)
- Extracted ISO files to USB
- Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi)
- In BIOS, set SATA Operation to AHCI and disabled Secure Boot
- Select USB drive from UEFI boot menu
a week ago my windows 7 ultimate crashed in the starting screen showing the dam blue screen and warning me that windows couldn't start. I went to the self repair tool.It tool like 4 hours to fix the issue. Then it said, that windows will start normally after that. What a lie. After the starting screen I got the black screen, just with the mouse. I tried everything I know, scanning the disk surface with other computer, I used the windows 7 installation CD. And that told me it couldn't find any issue starting windows. What can I try now? This happens evenwhen I boot normally or in any safe mode.
View 3 Replies View RelatedI have read many threads but they all contain ability to access start-up screen and I do not. I also do not get the pop up box to install windows 7. I literally only get "resuming windows" for 2 seconds, then straight to setup is starting services screen. I cannot pull up task manager or anything else. It is my nieces computer and I have no idea what she has been doing with it so I have no additional information for you. It is an Acer brand with windows 7, which is why I posted in this forum.
View 7 Replies View RelatedThis is a new HP laptop DM4 2180. I started it then decided to run Sysprep Generalize.Now I get Windows 7 is looping from "Setup is starting services" to "Setup will continue after restarting your computer" to starting windows.
At this point is stops at "setup is starting services" for the past 3 hours.
My Acer Aspire One started acting funny a few months ago (Replacing wallpaper with a black screen, shutting down randomly). One day, it shut down and a window popped up for a scan of sort. After a long and frustrating process, I decided to restore the OS. Now, whenever I boot it up, it gets stuck on a black screen that reads "Setup is Starting Services", after which a window ops up saying "Windows could not complete the installation. To install Windows on this computer, restart the installation."
View 3 Replies View RelatedI just finished building my first computer in 8-9 years or so. I was quite excited that my computer booted first time I turned it on but my excitement was soon overwhelmed with defeat. Let me start by linking my computers specs. [URL] I downloaded windows 7 from my schools msdn website I have the key and everything. I then burned it to a dvd. After booting from my dvd drive the loading bar continues and finishes. The 4 colorful balls float around then come together and my computer gets stuck.
Now It's very important to note that I was able to get past this screen after restarting my computer 4 times and I was successfully able to load continue on to installing windows only to get stuck in the same screen while booting from my ssd. Then I thought this issue could've been caused by using my SSD. So I unplugged it and repeated the same process using my seagate HD same thing happened. When I try starting it in safe mode the computer continues on to loading windows but I get prompted to restart it in normal mode so that the installation can continue.
I dropped my laptop this weekend. But it still worked for a few minutes before it froze. So I powered it off and tried to turn it back on. It turns back on just fine, but will continuously load the "Starting Windows" screen. I tried doing diagnostics and repairs, nothing. When I load it in safe mode, it loads up until the ClassPNP.sys, and then freezes.
View 7 Replies View RelatedTrying to install windows 7 on a different partition to multi-boot with windows xp sp3.
Downloaded the "7600.16385.090713-1255_x86fre_client_en-us_Retail_Ultimate-GRMCULFRER_EN_DVD.iso" file and burned a DVD.
Booted from the disc and all went well with the "press any key to boot from CD or DVD" / "setup is copying files"..
Post this screen, the windows logo appeared and it took about 3 minutes for the screen where you choose your language,etc to appear.
Then comes trouble The screen remained idle for about another 3 minutes before the "Setup is loading" appeared and it stops here forever.... pls help!
Note: I tried installing from my pen drive as well..., but the same exact result.
I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.
View 2 Replies View RelatedI am with a friend re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios. When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 14 Replies View RelatedWindows wont boot up I get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically:
Problem signature:
�Problem Event Name: StartupRepair Offline
�Problem Signature 01: 6.1.7600.16385
�Problem Signature 02: 6.1.7600.16385
�Problem Signature 03: unknown
�Problem Signature 04: 21200718
�Problem Signature 05: AutoFailover
�Problem Signature 06: 10
�Problem Signature 07: BadDriver
�OS Version: 6.1.7600.2.0.0.256.1
�Locale ID: 1033
my laptop will not load up. I can get it to the screen where it says repair computer, safe mode and all that. (advance boot options) but anytime I click any off them it goes to a screen where it says I need to put in the windows installer disk. I do not have any disk but I downloaded the repair disc from my other laptop. I put the disk in the computer and restart it and it just goes back to same screen. It does not automatic rebot, or ask me to rebot from disk.
View 2 Replies View Relatedhow do i get my acer aspire to boot, on screen msg is setup is starting servives and then theres abox comes on screen and says windows could not complete installation, to install windows on this computer, restart installation, and thats as far as it goes
View 2 Replies View RelatedI am helping out a friend by re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios.When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 1 Replies View RelatedIt just happened out of the blue. I just got the computer in november.I cant reboot it wont go passed this screen. It dont have a cd rom or anything like that?
View 2 Replies View RelatedFor some reason, it goes all the way through the install, or so I think, then I discover that it's rolling back the changes. It reboots and I notice a new option on the boot menu for rolling back Setup, which is the default one. So now the computer keeps booting that option and restarting as soon as the roll back screen has been show for a few seconds.o I decide to choose the Windows 7 option instead, figuring I will try to reinstall again. Instead I get a screen saying Setup is installing services, and an error message saying "The computer restarted unexpectedly or encountered an unexpected error."So I've been reading tons of pages online and tried everything like disabling the floppy disk in the BIOS, running Windows in Safe Mode and then through a command prompt disabling some devices, and trying to upgrade from the DVD only to find out I can only do a clean install there.
Making a clean install is absolutely NOT an option. So since the installation saved all the old files, I overwrote the install files with the old files, but I'm still getting that screen. So I'm figuring that there is somewhere in the registry database, where I can tell it not to load install but instead boot directly into Windows. But where would I find that?