This is a new HP laptop DM4 2180. I started it then decided to run Sysprep Generalize.Now I get Windows 7 is looping from "Setup is starting services" to "Setup will continue after restarting your computer" to starting windows.
At this point is stops at "setup is starting services" for the past 3 hours.
I recently had some problems with my computer and I ended up restoring the computer to its original factory settings. I chose the option of restoring it while keeping user files and what not. Anyways everything was going well up to this point. The screen has been stuck on "Setup is starting up services" (with that loading bar underneath the text) all night.
I'm pretty sure I did everything right. I unplugged everything, except the keyboard, monitor, and the mouse. I did not insert the Windows 7 recovery disc, but I was under the impression that I didn't need them for what I was doing. Do I just manually shut the computer down? Is there something on the keyboard that should abort the process? My computer is a Gateway and I'm using Windows 7.
I am not trying to install Windows 7, it came on my computer and has been working fine for over a year now. I restarted my computer a few days ago (after it had been working just fine) and now it will not load past the "Setup is Starting Services" screen. I keep getting the error message "Install Windos: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, then restart the installation." I cannot figure out why it is mentioning anything about installing windows when it came on the computer and has been working until now. I have hit "ok" and it does nothing but come back to the same stuck point. I do not have a disk for this computer as it never came with one. It is a Toshiba Satellite L455D.
So one evening my laptop randomly restarted itself and upon logging back in I found that I could not run almost any of my programs (.exe files). I tried checking for anything unusual in the registry but found nothing. In task manager when I clicked a program or attempted to run it in various ways I would see it pop up for a second before it got killed.
Finding no way of fixing it online I decided I would attempt the factory restore option that comes with the laptop in the system recovery that places all your documents in a C:Backup file. But nearing the end of this an error came up saying 'setup is starting services', which says to restart the computer to continue. But I can no longer get it past this screen. I've tried rebooting it in safe mode as well.
My computer is stuck on the mess that says : Setup is starting servies. wont do anything.I can shut it down but wen i turn it back on its on the screen again.
I have a gateway desktop with the windows 7 it is stuck on Saying setup is starting services, I do not have my origional windows 7 setup disk.What do I need to do to get my computer up and running again.
My Acer Aspire One started acting funny a few months ago (Replacing wallpaper with a black screen, shutting down randomly). One day, it shut down and a window popped up for a scan of sort. After a long and frustrating process, I decided to restore the OS. Now, whenever I boot it up, it gets stuck on a black screen that reads "Setup is Starting Services", after which a window ops up saying "Windows could not complete the installation. To install Windows on this computer, restart the installation."
I have read many threads but they all contain ability to access start-up screen and I do not. I also do not get the pop up box to install windows 7. I literally only get "resuming windows" for 2 seconds, then straight to setup is starting services screen. I cannot pull up task manager or anything else. It is my nieces computer and I have no idea what she has been doing with it so I have no additional information for you. It is an Acer brand with windows 7, which is why I posted in this forum.
this is what i have done so far. got a win 7 dell pc, a vostro 400 to be precise. installed all apps and settings that we need on our desktops. then i used sysprep to run the OOBE and generalize switch, then booted into windows PE to capture an image .wim file of the entire isntallation. this .wim file is then saved onto a 16gb usb memory stick becuase its quite large, then using imagex i apply the image to the same pc same hardware etc and it completes with no errors. then the next time i restart i should be at the OOBE with the language settings etc etc but its just stuck on this dam "setup is starting services" rubbish!!! anyone had this problem or done any win 7 imaging yet? floppy drive is disabled, no usb devices plugged in apart from a keyboard. so im lost now.
Setup is starting services.Windows could not complete the installation. To install Windows on this computer, restart the installation.About one month ago I decided I wanted to have a clean install of windows 7 on my acer machine. I did this by using an acer made pre-installed program. It claims to be very straightforward, all you have to do is click a button and they will reinstall windows 7 for you and even back up all your data ,so that after the clean install you don't lose a thing. Sounded great but in reality it has stopped my notebook from working.I am now in a circle-jerk of the error message I stated in the beginning of this topic. Once my computer restarts it just gets me the same error message again. I tried booting from a bootable USB-key with the windows 7 iso downloaded from official sources. But this did not do anything from me. I also went to acer support in my city. They offered me to fix it. All they had to do is copy all the info of my hard drive I wanted to keep and do a fresh install of windows 7. Would take them 3 hours. This is the easyiests option for me. But problem is I live in China and I don't trust those tech support guys for good reasons. I went there with my laptop, the tech-support guy put in a usb-key and started up my computer. It started some kind of diagnostics. After 20 minutes of this he stopped the diagnostics and started running some chinese software on my computer. Presumably booting from the USB-key. After a couple of clicks he was browsing around on my hard-drive. I was right behind him and could see him every move. He was snooping around my folders looking for all sorts of personal stuff. He was going to folders he had no business going to. I think he thought I had no idea what he was doing or would not recognize he was snooping around on my computer. At one point he went into a folder and told him not to go there in chinese. He quickly exited, but then couple of seconds later went back to that same folder to do some looking around. Presumably cause he thought I would not notice. So I do not trust these people one bit. And would not want him to copy all the info of my hard drive to then re-install windows7.
It started when I needed to take the computer back to factory default with a fresh install. It was going back to Acer to have the charger point fixed (charger socket had become loose but still charged when it was held in). I used the control panel interface to reinstall windows, all was going well until the laptop power died, I restarted the laptop and the screen displayed:
"Setup is starting Services" a pop up box then appeared with "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer and then restart installation."
I have searched around the net and found a few guides but most require a repair disc or Installation disk. I have neither. Is there any way of starting the install again? For example from Command Prompt?
"On the same error screen press SHIFT+F10 and it will open up a black Window. (a command prompt window) 2) In the black windows type the word "regedit"(without the inverted commas and hit enter. That will open the registry editor. In the Registry Editor.. Browse to.... HKLocal machine/SYSTEM/SETUP/STATUS/ChildCompletion, and after highliting childcompletion,on the right hand side check for setup.exe. if the value is 1 change it to 3.(by double clicking on setup.exe and changing the value shown in the box). Then close the registry editor and then also close the black window. Then click on OK for the error and the computer will restart and the installation may complete. just try it and let me know if it worked."
I tried the above and rebooted, I still get the dreaded "Setup is starting services" loop
I turned on my computer and i got a black screen saying "windows error recovery" I clicked on "start windows normally" and the logo starts to load. Then a black screen comes up saying "setup is starting services" and a pop-up titled "Install Windows" reads: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "ok" restart computer and then restart the installation. I press ok, and the computer restarts normally but then it stays stuck at the setup is starting services screen, with the Install windows pop-up.
my computer crash while rebooting it and every time i try to turn it on it always say "setup is starting services" and it will say to restart it and i did restart it but it always go back to the setup starting services and just ask my to turn it off again. what should i do?
I am trying to install Windows 7 through USB in my Dell studio 1555 Laptop. Every time it gets stuck at "setup is starting".I have already disabled all other boot options except USB. There is no floppy drive option.I have gone through more or less every post related to this problem , but the common solution that is to remove all the USB, Firewire etc. attachments. It does not work in my case as I am installing from USB.
It just happened out of the blue. I just got the computer in november.I cant reboot it wont go passed this screen. It dont have a cd rom or anything like that?
For some reason, it goes all the way through the install, or so I think, then I discover that it's rolling back the changes. It reboots and I notice a new option on the boot menu for rolling back Setup, which is the default one. So now the computer keeps booting that option and restarting as soon as the roll back screen has been show for a few seconds.o I decide to choose the Windows 7 option instead, figuring I will try to reinstall again. Instead I get a screen saying Setup is installing services, and an error message saying "The computer restarted unexpectedly or encountered an unexpected error."So I've been reading tons of pages online and tried everything like disabling the floppy disk in the BIOS, running Windows in Safe Mode and then through a command prompt disabling some devices, and trying to upgrade from the DVD only to find out I can only do a clean install there.
Making a clean install is absolutely NOT an option. So since the installation saved all the old files, I overwrote the install files with the old files, but I'm still getting that screen. So I'm figuring that there is somewhere in the registry database, where I can tell it not to load install but instead boot directly into Windows. But where would I find that?
currently using home premium 32bit but got pro upgrade 64 bit so had to do the custom install from booting with the disk I choose the language, keyboard layout etc, choose custom install, pick the hard drive and it goes to the installing screen.
When part 2 of the install screen is almost done it said installation will continue after the computer restarts. After it restarts, it just stays on the "starting windows" screen and the windows logo never shows. It wa son there for hours. I restarted by pressing the restart button and it continued back on the step 2 and them same thing, restart and then continue later but now the screen is just stuck on the "starting windows" screen.
I purchased my laptop in January and I'm not really sure what happened, I must have been struck by a pretty bad virus or something because I had a lot of protection and ran regular scans. But anyway, one day I booted up my computer and it said error recovery or something a prompted me to repair my pc but I choose start windows normally, and it loaded normally but just before it could get to the login screen a blue screen error flashed for a split second then my laptop restarted and took me to the error screen again. when I try repair my computer, it takes me tow blank lie screen,ole the login screen, with a cursor in the middle, but no dialog box. I left this running for up to 3 days, so it's definitely not just loading. so I decided my computer is pretty much screwed, and searched for my installation disc it came with. (windows was already preinstalled so I'd never used it before. on startup I pressed f12 and booted from cd rom, then it said press any key and took me to a loading screen, which took about 5 minutes and then to the installation screen. I said my language is English, choose uk English etc. then it says install now or repair your computer. when I click the repair option, I am taken to the same blank blue screen from before. when I press install it says setup is starting... and the loading cursor is spinning, so I know it's not frozen. I left it for half an hour, tried again, and this time left it for 11 hours, but still no setup has started. there can't be anything wrong with my disc, I'd never taken it out of the packet before, and I was very careful not to scratch it. it's a dell operating system windows 7 disc for if you need to reinstall windows on your preinstalled pc.
First time building a PC, trying to install Windows on my Crucial M4 via USB (don't have a disk drive...) and I get stuck on the "setup is starting" screen. If I try to boot with my older HDD that has Windows installed on it, I get a BSOD with error 7B.
Today, my computer just finished installing updates, and was waiting for me at the user selection/log in screen when I checked on it. I powered it off by holding the power button down to change some BIOS settings. (In the end, I did not save any changes to the BIOS, so I can rule that out) After rebooting and logging in, MSE and avast both tell me that their respective services have been stopped, and WiFi is not working either (its stuck as connected, but has the small yellow triangle in the icon, it says its identifying, but its been stuck like that). Other services, such as Dropbox and RocketDock have also been stopped on my computer.I then rebooted into Safe Mode with Networking. WiFi is still not working, and now, audio service is also stopped. From here, I uninstalled all of the updates that had been installed today. I then rebooted normally.Finally, RocketDock and Audio Service are running again, avast!, MSE, Dropbox, and WiFi are not still. I'm using Malwarebytes' and avast! to scan for crap that might be doing stuff (Malwarebytes' has already picked up four positives, both scans are still underway).
But now when I boot the Laptop, I see some error messages flash by .. late in the boot process, well after the Windows animation starts.Is there a way to step through starting of the services to see what is generating the errors ? I tried the "F5" key and the "F8" key ..[CODE]
i installed windows 7 but didnt know u had to partition the hard drive the instalation got to setup services and restarts then it says that the hard drive is in bad condition but i cant open any options such as bios or setup only thing i can do is press f1 to resume which does same thing wit services setup then goes back to the black screen with f1 resume
if I try to boot it normally it gets blue screen and dies. The same thing happends if I use fail safe. (crashed at crcdisk)So I thought idd reinstall it. However when i boot up from my windows cd, I only get the 2 possibilities to "setup and recovery". No matter which of those I choose it goes to "loading files" and then to "starting windows".I've reinstalled quite a few computers, with xp and windows 7, and I've never had any trouble doing so. So i thought idd try to take out the hdd manually, but I realised I dont have the cables to connect it to my other pc, and clean the hdd that way.
The power in southern california today and when it came back on my computer wouldnt boot all the way to windows. I have tried booting fromt he cd but it does the same thing and just stays at the splash screen. I have tried recovery mode and it sticks at the windows is loading files bar. Safe mode doesnt work either as it sticks at one file and stays there the entire time.
I had just put this build together and occasionally when I boot up the computer, it would freeze at "Starting Windows" screen and will not go anywhere else until I hard shutdown the computer and boot it back up and hope it doesn't get stuck again.I reinstalled Windows 7 thinking it's the new SSD I bought but the problem still occurs, I also ran CHKDSK again and no errors have shown up.I haven't ran a memory test program yet to check my RAM but I don't think that is the issue since I do not get BSOD of any kind.I also have another problem that rarely occurs and only happens when watching you tube videos, the screen completely friezes and artifacts show up as if the video card is broken but I never have such problems while playing video games such as BF3 and Starcraft II.Anyhow, I have searched Tomshardware and the web but still cannot find a solution to this and I hope you guys can help me find what the problem is.I'm beginning to question my RAM, Motherboard, or SSD at this moment.
My laptop decided not to start up today. It shut down last night normally, today it keeps getting stuck on "starting window". I tried safe mode, but it gets stuck at starting windows. I tried starting from disk, it says loading files then it goes start to the starting windows and gets stuck. I tried pressing f8 but there is no repair computer option. Did my ssd die?