Acer Aspire One D255 Setup Is Starting Services Loop

Jan 20, 2013

"On the same error screen press SHIFT+F10 and it will open up a black Window. (a command prompt window) 2) In the black windows type the word "regedit"(without the inverted commas and hit enter. That will open the registry editor. In the Registry Editor.. Browse to.... HKLocal machine/SYSTEM/SETUP/STATUS/ChildCompletion, and after highliting childcompletion,on the right hand side check for setup.exe. if the value is 1 change it to 3.(by double clicking on setup.exe and changing the value shown in the box). Then close the registry editor and then also close the black window. Then click on OK for the error and the computer will restart and the installation may complete. just try it and let me know if it worked."

I tried the above and rebooted, I still get the dreaded "Setup is starting services" loop

View 1 Replies


ADVERTISEMENT

Acer Aspire Stuck On Setup Is Starting Services

Jun 30, 2011

So one evening my laptop randomly restarted itself and upon logging back in I found that I could not run almost any of my programs (.exe files). I tried checking for anything unusual in the registry but found nothing. In task manager when I clicked a program or attempted to run it in various ways I would see it pop up for a second before it got killed.

Finding no way of fixing it online I decided I would attempt the factory restore option that comes with the laptop in the system recovery that places all your documents in a C:Backup file. But nearing the end of this an error came up saying 'setup is starting services', which says to restart the computer to continue. But I can no longer get it past this screen. I've tried rebooting it in safe mode as well.

View 9 Replies View Related

Setup Starting Services Loop - No Repair Or Installation Disk

Feb 8, 2012

My laptop Specs below:
Acer Aspire 5742
Intel i5-480M
6GB DDR3
Intel Graphics

It started when I needed to take the computer back to factory default with a fresh install. It was going back to Acer to have the charger point fixed (charger socket had become loose but still charged when it was held in). I used the control panel interface to reinstall windows, all was going well until the laptop power died, I restarted the laptop and the screen displayed:

"Setup is starting Services" a pop up box then appeared with "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer and then restart installation."

I have searched around the net and found a few guides but most require a repair disc or Installation disk. I have neither. Is there any way of starting the install again? For example from Command Prompt?

View 4 Replies View Related

Get Acer Aspire To Boot On Screen Message Is Setup Is Starting Servives

May 12, 2012

how do i get my acer aspire to boot, on screen msg is setup is starting servives and then theres abox comes on screen and says windows could not complete installation, to install windows on this computer, restart installation, and thats as far as it goes

View 2 Replies View Related

Need Driver For Acer Aspire One D255?

Jun 5, 2012

I'm using Acer Aspire One D255 Windows XP . But I just install new Windows 7 Home Pre 32bit . I can not access internet . I checked "Device manager" and they showed that I have no driver for [Ethernet Controller, Network Controller ,and Video Controller] . I think I deleted Windows.old already , so now I can't recover the original driver . I did a search but can't find anywhere .

View 1 Replies View Related

Driver Webcam Acer Aspire One D255?

Sep 27, 2012

driver webcam acer aspire one D255 for window 7

View 1 Replies View Related

ACER Aspire One D255-2256 Blue-screen Of Death?

Oct 29, 2011

I have an ACer Aspire one D2255-2256. At varying amounts of time of computer being on the computer goes to the Blue Screen Of Death, BSOD. I have seen different reasons given for possible problems. One problem is that the Blue Screen only stays on screen for a couple of seconds, not enough time to read the screen. It is on for a couple of seconds and at the bottom of screen it mentions '??????? dumping ', which only takes a couple of seconds, then computer blanks out and reboots. I was able to take one picture with camera of one of the blue screen appearances. But like I said earlier the reasons given are not always the same,just don't have the time to read it. I have done a complete recovery to factory settings and default settings. Still gets the blue screen.

View 4 Replies View Related

Acer Aspire One D255 Mini Running Slow&choppy

Feb 19, 2011

I just got this new laptop! And its running slow like its an old laptop, I have windows7 starter, [just putting that out there] So yeah it runs slow, and choppy, and freezes when I get on the website, and I have to wait for it unfreeze, and then load correctly.

View 8 Replies View Related

Free Download Acer Aspire D255 Series Webcam Driver?

Oct 18, 2012

Gostaria de receber drives para a web camera de acer D255. Podem ajudar me'?

View 1 Replies View Related

Setup Is Starting Services Screen

Oct 11, 2011

I have read many threads but they all contain ability to access start-up screen and I do not. I also do not get the pop up box to install windows 7. I literally only get "resuming windows" for 2 seconds, then straight to setup is starting services screen. I cannot pull up task manager or anything else. It is my nieces computer and I have no idea what she has been doing with it so I have no additional information for you. It is an Acer brand with windows 7, which is why I posted in this forum.

View 7 Replies View Related

How To Unlock Setup Is Starting Services

Feb 15, 2013

how can i unlock the acer setup starting services will not go past this screen and can't get anything else to appear

View 2 Replies View Related

Laptop Is Stuck At Setup Is Starting Services?

Mar 12, 2012

my toshiba laptop is stuck at setup is starting services

View 3 Replies View Related

Windows 7 Hung On Setup Is Starting Services

Jul 27, 2010

this is what i have done so far. got a win 7 dell pc, a vostro 400 to be precise. installed all apps and settings that we need on our desktops. then i used sysprep to run the OOBE and generalize switch, then booted into windows PE to capture an image .wim file of the entire isntallation. this .wim file is then saved onto a 16gb usb memory stick becuase its quite large, then using imagex i apply the image to the same pc same hardware etc and it completes with no errors. then the next time i restart i should be at the OOBE with the language settings etc etc but its just stuck on this dam "setup is starting services" rubbish!!! anyone had this problem or done any win 7 imaging yet? floppy drive is disabled, no usb devices plugged in apart from a keyboard. so im lost now.

View 5 Replies View Related

Stuck On (Setup Is Starting Up Services) During Restoration

Aug 3, 2012

I recently had some problems with my computer and I ended up restoring the computer to its original factory settings. I chose the option of restoring it while keeping user files and what not. Anyways everything was going well up to this point. The screen has been stuck on "Setup is starting up services" (with that loading bar underneath the text) all night.

I'm pretty sure I did everything right. I unplugged everything, except the keyboard, monitor, and the mouse. I did not insert the Windows 7 recovery disc, but I was under the impression that I didn't need them for what I was doing. Do I just manually shut the computer down? Is there something on the keyboard that should abort the process? My computer is a Gateway and I'm using Windows 7.

View 8 Replies View Related

Computer Stuck On (Setup Is Starting Services) Screen

May 30, 2011

I am not trying to install Windows 7, it came on my computer and has been working fine for over a year now. I restarted my computer a few days ago (after it had been working just fine) and now it will not load past the "Setup is Starting Services" screen. I keep getting the error message "Install Windos: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, then restart the installation." I cannot figure out why it is mentioning anything about installing windows when it came on the computer and has been working until now. I have hit "ok" and it does nothing but come back to the same stuck point. I do not have a disk for this computer as it never came with one. It is a Toshiba Satellite L455D.

View 4 Replies View Related

Setup Is Starting Services / Windows Could Not Complete Installation

Jul 19, 2012

Setup is starting services.Windows could not complete the installation. To install Windows on this computer, restart the installation.About one month ago I decided I wanted to have a clean install of windows 7 on my acer machine. I did this by using an acer made pre-installed program. It claims to be very straightforward, all you have to do is click a button and they will reinstall windows 7 for you and even back up all your data ,so that after the clean install you don't lose a thing. Sounded great but in reality it has stopped my notebook from working.I am now in a circle-jerk of the error message I stated in the beginning of this topic. Once my computer restarts it just gets me the same error message again. I tried booting from a bootable USB-key with the windows 7 iso downloaded from official sources. But this did not do anything from me. I also went to acer support in my city. They offered me to fix it. All they had to do is copy all the info of my hard drive I wanted to keep and do a fresh install of windows 7. Would take them 3 hours. This is the easyiests option for me. But problem is I live in China and I don't trust those tech support guys for good reasons. I went there with my laptop, the tech-support guy put in a usb-key and started up my computer. It started some kind of diagnostics. After 20 minutes of this he stopped the diagnostics and started running some chinese software on my computer. Presumably booting from the USB-key. After a couple of clicks he was browsing around on my hard-drive. I was right behind him and could see him every move. He was snooping around my folders looking for all sorts of personal stuff. He was going to folders he had no business going to. I think he thought I had no idea what he was doing or would not recognize he was snooping around on my computer. At one point he went into a folder and told him not to go there in chinese. He quickly exited, but then couple of seconds later went back to that same folder to do some looking around. Presumably cause he thought I would not notice. So I do not trust these people one bit. And would not want him to copy all the info of my hard drive to then re-install windows7.

View 1 Replies View Related

My Computer Is Stuck On Message / Setup Is Starting Services

Sep 10, 2012

My computer is stuck on the mess that says : Setup is starting servies. wont do anything.I can shut it down but wen i turn it back on its on the screen again.

View 4 Replies View Related

Gateway Desktop With Windows 7 It Is Stuck On Saying Setup Is Starting Services

Sep 30, 2011

I have a gateway desktop with the windows 7 it is stuck on Saying setup is starting services, I do not have my origional windows 7 setup disk.What do I need to do to get my computer up and running again.

View 1 Replies View Related

Black Screen Saying "setup Is Starting Services"

Feb 10, 2013

It just happened out of the blue. I just got the computer in november.I cant reboot it wont go passed this screen. It dont have a cd rom or anything like that?

View 2 Replies View Related

Disabling "Setup Is Starting Services" Screen?

Jul 6, 2011

For some reason, it goes all the way through the install, or so I think, then I discover that it's rolling back the changes. It reboots and I notice a new option on the boot menu for rolling back Setup, which is the default one. So now the computer keeps booting that option and restarting as soon as the roll back screen has been show for a few seconds.o I decide to choose the Windows 7 option instead, figuring I will try to reinstall again. Instead I get a screen saying Setup is installing services, and an error message saying "The computer restarted unexpectedly or encountered an unexpected error."So I've been reading tons of pages online and tried everything like disabling the floppy disk in the BIOS, running Windows in Safe Mode and then through a command prompt disabling some devices, and trying to upgrade from the DVD only to find out I can only do a clean install there.

Making a clean install is absolutely NOT an option. So since the installation saved all the old files, I overwrote the install files with the old files, but I'm still getting that screen. So I'm figuring that there is somewhere in the registry database, where I can tell it not to load install but instead boot directly into Windows. But where would I find that?

View 3 Replies View Related

HP Stuck On "setup Is Starting Services"

Jun 23, 2012

This is a new HP laptop DM4 2180. I started it then decided to run Sysprep Generalize.Now I get Windows 7 is looping from "Setup is starting services" to "Setup will continue after restarting your computer" to starting windows.

At this point is stops at "setup is starting services" for the past 3 hours.

View 1 Replies View Related

"Setup Is Starting Services" Stuck?

Sep 23, 2012

My Acer Aspire One started acting funny a few months ago (Replacing wallpaper with a black screen, shutting down randomly). One day, it shut down and a window popped up for a scan of sort. After a long and frustrating process, I decided to restore the OS. Now, whenever I boot it up, it gets stuck on a black screen that reads "Setup is Starting Services", after which a window ops up saying "Windows could not complete the installation. To install Windows on this computer, restart the installation."

View 3 Replies View Related

Download Setup Webcam Acer Aspire 5750?

Jan 2, 2013

Download setup webcam acer aspire 5750?

View 1 Replies View Related

Windows 7 Starter Getting Error On Initial Setup; Locked In Setup Loop?

Oct 5, 2011

one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.

View 6 Replies View Related

Some Services Not Starting?

Jul 12, 2012

Today, my computer just finished installing updates, and was waiting for me at the user selection/log in screen when I checked on it. I powered it off by holding the power button down to change some BIOS settings. (In the end, I did not save any changes to the BIOS, so I can rule that out) After rebooting and logging in, MSE and avast both tell me that their respective services have been stopped, and WiFi is not working either (its stuck as connected, but has the small yellow triangle in the icon, it says its identifying, but its been stuck like that). Other services, such as Dropbox and RocketDock have also been stopped on my computer.I then rebooted into Safe Mode with Networking. WiFi is still not working, and now, audio service is also stopped. From here, I uninstalled all of the updates that had been installed today. I then rebooted normally.Finally, RocketDock and Audio Service are running again, avast!, MSE, Dropbox, and WiFi are not still. I'm using Malwarebytes' and avast! to scan for crap that might be doing stuff (Malwarebytes' has already picked up four positives, both scans are still underway).

View 3 Replies View Related

Constant Loop Windows Not Starting?

Aug 5, 2012

I am using my iPhone to try to figure out my computer. So it is the only one I have. It is in a constant loop of windows not starting and trying to fix errors then says it can't, I can't get it to load in safe mode or anything else. I can use the box where u put in commands and found my registry hive says 0 bytes. I do not know how to fix this. And I do not have a windows disk cause it came already installed. So how can I fix this and what do I need to do or try.

I do have a Windows 7 product key on the back of my computer.

View 9 Replies View Related

Acer Aspire Recovery Disk Windows 7 For Aspire 5534?

Jan 5, 2013

I accidentally reinstalled the wrong Operating System Recovery CD on my Acer Aspire 5534 laptop, and I want to return it back to factory settings. How do I do I restore it back to factory settings?

View 2 Replies View Related

Acer Aspire Recovery Disk Windows 7 For Aspire 5534

Jan 5, 2013

I accidentally reinstalled the wrong Operating System Recovery CD on my Acer Aspire 5534 laptop, and I want to return it back to factory settings. How do I do I restore it back to factory settings

View 1 Replies View Related

Way To Step Through Starting Of The Services To See What Is Generating The Errors?

Jun 27, 2012

But now when I boot the Laptop, I see some error messages flash by .. late in the boot process, well after the Windows animation starts.Is there a way to step through starting of the services to see what is generating the errors ? I tried the "F5" key and the "F8" key ..[CODE]

View 1 Replies View Related

Stop Selected Applications Or Services From Starting Up With Windows 7?

Nov 16, 2011

Is there a way to stop selected applications or services from starting up with Windows? Is there a list of such items that can be safely disabled?

View 3 Replies View Related

Installation Got To Setup Services?

May 10, 2011

i installed windows 7 but didnt know u had to partition the hard drive the instalation got to setup services and restarts then it says that the hard drive is in bad condition but i cant open any options such as bios or setup only thing i can do is press f1 to resume which does same thing wit services setup then goes back to the black screen with f1 resume

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved