my computer crash while rebooting it and every time i try to turn it on it always say "setup is starting services" and it will say to restart it and i did restart it but it always go back to the setup starting services and just ask my to turn it off again. what should i do?
I am trying to install Windows 7 through USB in my Dell studio 1555 Laptop. Every time it gets stuck at "setup is starting".I have already disabled all other boot options except USB. There is no floppy drive option.I have gone through more or less every post related to this problem , but the common solution that is to remove all the USB, Firewire etc. attachments. It does not work in my case as I am installing from USB.
I have a gateway desktop with the windows 7 it is stuck on Saying setup is starting services, I do not have my origional windows 7 setup disk.What do I need to do to get my computer up and running again.
I turned on my computer and i got a black screen saying "windows error recovery" I clicked on "start windows normally" and the logo starts to load. Then a black screen comes up saying "setup is starting services" and a pop-up titled "Install Windows" reads: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "ok" restart computer and then restart the installation. I press ok, and the computer restarts normally but then it stays stuck at the setup is starting services screen, with the Install windows pop-up.
I recently had some problems with my computer and I ended up restoring the computer to its original factory settings. I chose the option of restoring it while keeping user files and what not. Anyways everything was going well up to this point. The screen has been stuck on "Setup is starting up services" (with that loading bar underneath the text) all night.
I'm pretty sure I did everything right. I unplugged everything, except the keyboard, monitor, and the mouse. I did not insert the Windows 7 recovery disc, but I was under the impression that I didn't need them for what I was doing. Do I just manually shut the computer down? Is there something on the keyboard that should abort the process? My computer is a Gateway and I'm using Windows 7.
I am not trying to install Windows 7, it came on my computer and has been working fine for over a year now. I restarted my computer a few days ago (after it had been working just fine) and now it will not load past the "Setup is Starting Services" screen. I keep getting the error message "Install Windos: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, then restart the installation." I cannot figure out why it is mentioning anything about installing windows when it came on the computer and has been working until now. I have hit "ok" and it does nothing but come back to the same stuck point. I do not have a disk for this computer as it never came with one. It is a Toshiba Satellite L455D.
So one evening my laptop randomly restarted itself and upon logging back in I found that I could not run almost any of my programs (.exe files). I tried checking for anything unusual in the registry but found nothing. In task manager when I clicked a program or attempted to run it in various ways I would see it pop up for a second before it got killed.
Finding no way of fixing it online I decided I would attempt the factory restore option that comes with the laptop in the system recovery that places all your documents in a C:Backup file. But nearing the end of this an error came up saying 'setup is starting services', which says to restart the computer to continue. But I can no longer get it past this screen. I've tried rebooting it in safe mode as well.
My computer is stuck on the mess that says : Setup is starting servies. wont do anything.I can shut it down but wen i turn it back on its on the screen again.
currently using home premium 32bit but got pro upgrade 64 bit so had to do the custom install from booting with the disk I choose the language, keyboard layout etc, choose custom install, pick the hard drive and it goes to the installing screen.
When part 2 of the install screen is almost done it said installation will continue after the computer restarts. After it restarts, it just stays on the "starting windows" screen and the windows logo never shows. It wa son there for hours. I restarted by pressing the restart button and it continued back on the step 2 and them same thing, restart and then continue later but now the screen is just stuck on the "starting windows" screen.
I purchased my laptop in January and I'm not really sure what happened, I must have been struck by a pretty bad virus or something because I had a lot of protection and ran regular scans. But anyway, one day I booted up my computer and it said error recovery or something a prompted me to repair my pc but I choose start windows normally, and it loaded normally but just before it could get to the login screen a blue screen error flashed for a split second then my laptop restarted and took me to the error screen again. when I try repair my computer, it takes me tow blank lie screen,ole the login screen, with a cursor in the middle, but no dialog box. I left this running for up to 3 days, so it's definitely not just loading. so I decided my computer is pretty much screwed, and searched for my installation disc it came with. (windows was already preinstalled so I'd never used it before. on startup I pressed f12 and booted from cd rom, then it said press any key and took me to a loading screen, which took about 5 minutes and then to the installation screen. I said my language is English, choose uk English etc. then it says install now or repair your computer. when I click the repair option, I am taken to the same blank blue screen from before. when I press install it says setup is starting... and the loading cursor is spinning, so I know it's not frozen. I left it for half an hour, tried again, and this time left it for 11 hours, but still no setup has started. there can't be anything wrong with my disc, I'd never taken it out of the packet before, and I was very careful not to scratch it. it's a dell operating system windows 7 disc for if you need to reinstall windows on your preinstalled pc.
First time building a PC, trying to install Windows on my Crucial M4 via USB (don't have a disk drive...) and I get stuck on the "setup is starting" screen. If I try to boot with my older HDD that has Windows installed on it, I get a BSOD with error 7B.
This is a new HP laptop DM4 2180. I started it then decided to run Sysprep Generalize.Now I get Windows 7 is looping from "Setup is starting services" to "Setup will continue after restarting your computer" to starting windows.
At this point is stops at "setup is starting services" for the past 3 hours.
My Acer Aspire One started acting funny a few months ago (Replacing wallpaper with a black screen, shutting down randomly). One day, it shut down and a window popped up for a scan of sort. After a long and frustrating process, I decided to restore the OS. Now, whenever I boot it up, it gets stuck on a black screen that reads "Setup is Starting Services", after which a window ops up saying "Windows could not complete the installation. To install Windows on this computer, restart the installation."
if I try to boot it normally it gets blue screen and dies. The same thing happends if I use fail safe. (crashed at crcdisk)So I thought idd reinstall it. However when i boot up from my windows cd, I only get the 2 possibilities to "setup and recovery". No matter which of those I choose it goes to "loading files" and then to "starting windows".I've reinstalled quite a few computers, with xp and windows 7, and I've never had any trouble doing so. So i thought idd try to take out the hdd manually, but I realised I dont have the cables to connect it to my other pc, and clean the hdd that way.
The power in southern california today and when it came back on my computer wouldnt boot all the way to windows. I have tried booting fromt he cd but it does the same thing and just stays at the splash screen. I have tried recovery mode and it sticks at the windows is loading files bar. Safe mode doesnt work either as it sticks at one file and stays there the entire time.
I had just put this build together and occasionally when I boot up the computer, it would freeze at "Starting Windows" screen and will not go anywhere else until I hard shutdown the computer and boot it back up and hope it doesn't get stuck again.I reinstalled Windows 7 thinking it's the new SSD I bought but the problem still occurs, I also ran CHKDSK again and no errors have shown up.I haven't ran a memory test program yet to check my RAM but I don't think that is the issue since I do not get BSOD of any kind.I also have another problem that rarely occurs and only happens when watching you tube videos, the screen completely friezes and artifacts show up as if the video card is broken but I never have such problems while playing video games such as BF3 and Starcraft II.Anyhow, I have searched Tomshardware and the web but still cannot find a solution to this and I hope you guys can help me find what the problem is.I'm beginning to question my RAM, Motherboard, or SSD at this moment.
My laptop decided not to start up today. It shut down last night normally, today it keeps getting stuck on "starting window". I tried safe mode, but it gets stuck at starting windows. I tried starting from disk, it says loading files then it goes start to the starting windows and gets stuck. I tried pressing f8 but there is no repair computer option. Did my ssd die?
Doing a Normal startup, or booting from the Windows 7 cd it will get so far as the Starting Windows screen, the Microsoft copy-write shows up briefly greyed out some, and just sits there. In Safe Mode, it loads everything seemingly, lastly avgidsha.sys, then sits on Please wait...I have narrowed it down to hot the HDD or memory. I've put another HDD with Windows 7 on it, getting the same results. The MemTest 86+ cd actually loads and runs, came up 100% with no errors. Other suggestions that I have found use bootable CDs that want to start Windows first.The Windows 7 CD, Windows Defender Offline, Windows Recovery disk all get stuck at the same place as the HDD, the Starting Windows screen
When ever I turn my computer on it is always stuck on the Starting Windows screen and when I try and do it in safe mode it works but was I am signed in all that shows up is a black screen with Safe Mode in each corner. I have also tried start up repair but it says it can not find a problem or it will just continually search for a problem (waited 4 hours then I just turned it off)
Firstly my laptop (which is a Dell Inspiron N5030 running Windows 7 64 bit) starting showing up with a black screen when it was trying to come out of hibernation, it gave the status as 0xc0000242 and saying there was a fatal error with the hiberfil.sys and that it would have to restart. This continued for a while with the laptop closing all the applications that I had open when I hibernated, sometimes it would come out of hibernation without any problems at all. Then my laptop started to become very slow and particularly when loading up windows after being shutdown, restarted or hibernated. It was staying on the "starting windows" screen for about 5 minutes before actually starting up. I did a system restore on the laptop but no luck. I did a CHKDSK error check on the laptop but had no luck. I did a start up recovery but once again no luck.
Yesterday I decided to back up all my data onto an external harddrive and reinstall windows 7 completely as I have had the laptop over a year now and it was getting pretty full of junk anyway. I thought the problem had go away but it has had all of the above problems today no aswell, it is CHKDSK checking at the moment and has found several unreadable segments.
I recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:
- Formatted a brand new 4GB USB drive to FAT32 - Downloaded Windows 7 ISO (I have a key) - Extracted ISO files to USB - Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi) - In BIOS, set SATA Operation to AHCI and disabled Secure Boot - Select USB drive from UEFI boot menu
a week ago my windows 7 ultimate crashed in the starting screen showing the dam blue screen and warning me that windows couldn't start. I went to the self repair tool.It tool like 4 hours to fix the issue. Then it said, that windows will start normally after that. What a lie. After the starting screen I got the black screen, just with the mouse. I tried everything I know, scanning the disk surface with other computer, I used the windows 7 installation CD. And that told me it couldn't find any issue starting windows. What can I try now? This happens evenwhen I boot normally or in any safe mode.
I just received my new ASUS HD7850-DC-2GD5 video card. I installed it, booted up Windows, and installed the drivers from the included CD. Then I rebooted Windows. However, my system hangs at the 'Starting Windows' screen. Actually, it seems that only the video hangs--because if I type in my password and hit enter, as if I could see the welcome screen, I hear the 'correct' sound that normally plays when I log in. I just can't *see* what's going on.
I reset the system and booted into safe mode, where I entered Device Manager and uninstalled the HD7850 display adapter. Then I rebooted Windows, and again I'm able to operate normally -- but without the AMD Radeon drivers. I've tried downloading the latest drivers from the AMD website, but installing those leads to the same problem. I get stuck at the 'Starting Windows' screen.
This has me totally perplexed... I bought an ASUS-branded card specifically to try and avoid drama, as I also have an ASUS mobo (the P8Z68-VPRO/GEN3). My CPU is an i7 2700k, not currently overclocked at all. My PSU is an XFX PRO850W XXX Edition Semi-Modular 88Plus 850 Watt PSU, which should be up to the task, right?
I just finished building my first computer in 8-9 years or so. I was quite excited that my computer booted first time I turned it on but my excitement was soon overwhelmed with defeat. Let me start by linking my computers specs. [URL] I downloaded windows 7 from my schools msdn website I have the key and everything. I then burned it to a dvd. After booting from my dvd drive the loading bar continues and finishes. The 4 colorful balls float around then come together and my computer gets stuck.
Now It's very important to note that I was able to get past this screen after restarting my computer 4 times and I was successfully able to load continue on to installing windows only to get stuck in the same screen while booting from my ssd. Then I thought this issue could've been caused by using my SSD. So I unplugged it and repeated the same process using my seagate HD same thing happened. When I try starting it in safe mode the computer continues on to loading windows but I get prompted to restart it in normal mode so that the installation can continue.
I dropped my laptop this weekend. But it still worked for a few minutes before it froze. So I powered it off and tried to turn it back on. It turns back on just fine, but will continuously load the "Starting Windows" screen. I tried doing diagnostics and repairs, nothing. When I load it in safe mode, it loads up until the ClassPNP.sys, and then freezes.
this is what i have done so far. got a win 7 dell pc, a vostro 400 to be precise. installed all apps and settings that we need on our desktops. then i used sysprep to run the OOBE and generalize switch, then booted into windows PE to capture an image .wim file of the entire isntallation. this .wim file is then saved onto a 16gb usb memory stick becuase its quite large, then using imagex i apply the image to the same pc same hardware etc and it completes with no errors. then the next time i restart i should be at the OOBE with the language settings etc etc but its just stuck on this dam "setup is starting services" rubbish!!! anyone had this problem or done any win 7 imaging yet? floppy drive is disabled, no usb devices plugged in apart from a keyboard. so im lost now.
I refuse to believe my 500g Sata Hard drive that has over 400gs of file and information, is all now magically a paper weight. No Physical damage has happened to the Drive at all. This is the Issue:Originally Half of the Drive was Encrypted with True Crypt and the other Half was the System Drive((C drive 50g)) and a "general" Drive/ ((175gigs)). The Problem started when some odd way it seems My Encrypted drive become corrupted to the point it would no longer easily mount. It would take 4~5Min's to mount as opposed to the normal 4~5 seconds.What happens when it did mount, The Drive was not working correctly. I couldn't access my files on that drive at all. Not only that, While it seemed like it did Mount the True Crypt Drive, my entire CPU became Non responsive. I couldn't do anything. I was unable to click on anything on the desktop, bring up task manager or even ctrl+alt+del to log off or anything. It was like it was frozen but I was only able to move the mouse...I waited a while((15~20Min's)) and went to restart the CPU by holding the power button.
Now When ever I try to load or boot from that Hard drive...Nothing Happens....It hangs at the "starting Windows" screen. I have windows 7-64bit ultimate. I tried to load from the Win 7 disk, and it hangs at a blank Screen. When I tried to use the repair feature of the Win Xp service pack 2((Remember windows XP *_*??))It hangs at analyzing the Hard drive "47850 asapii at 0 at 0 something something"..When I try to use the advance options of the Windows 7 boot, Safe mode of all types hangs at lading the drivers, Last Known good Configuration hangs at starting windows. Its Like part of the HDD doesn't want to load for anything in the world . And When I have mentioned Hangs I mean it sits there for 1~2 hours and nothing has changed.
I have ideas in my head But I don't even Know if they are possible. Oh Oh..at when I try to Load the HDD by having a back up 40g hard drive be the main booter it STILL hangs at the starting windows screen. I know its sometimes suggested to try it HDD in another CPU but if its not the main Boot Drive is that the same thing? Really don't have any Mobos that have Sata Slots for me to try that out on.I'm praying a simple chkdsk would Solve everything But there's no way I can Issue that Command. My Question(s) are:s there a Way to force the CPU to do a chkdsk command pre boot?Is there a way to have the HDD disabled at start up and enable it during the back up drives desktop((Via check for hardware changes or the "Manage" feature by right clicking computer from the start menu
I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.
i was wondering if anyone had advice/expierence with windows 7 not working past the welcome screen? yesterday i had been using google chrome and dl'd a song off Internet when suddenly the cpu shutdown. i thought it was powersave mode but it ended up being setup repair. i let a few hours pass and booted again,got to the home screen and it was my previous 3 accounts not a new one where all my files were moved. major problem was that neither my mouse or keyboard worked. i tried going into various safe modes but theyd all result in the same thing. the funny thing is thatboth mouse and keyboard work in the boot and bios but not at login.