Laptop Stuck At Startup After Clean Install
Oct 10, 2009
Whilst my sister and family were away this weekend I offered to install Windows 7 Home Premium (x86) on her Toshiba Equium L40-10U laptop.
It was previously running Windows Vista Home Premium, however as it was infested with all kinds of nasties I figured I would kill two birds with one stone.
Anyway, I downloaded the ISO from Technet and burnt it to DVD, updated the BIOS on the laptop (worked fine) and proceeded to install Windows 7 (fresh, not upgrade, completely wiped and started from scratch).
Everything went fine, went through setup and logged on, Windows Update kicked in, perfect.
Had a play around and the machine was running like a dream, so I started installing stuff. As I didn't require ANY extra drivers I installed the RTM version of Microsoft Security Essentials first. I then moved on to Spybot - Search & Destroy etc.
When I restarted the machine it started to boot and got to the Starting Windows screen, however the Windows animation didn't appear, I waited, and waited, and nothing. Restarted again and it went to the Startup Repair option, did that, found nothing, restarted, and again it was stuck at the Starting Windows screen.
I rebooted and tried for Safe Mode, which very weirdly failed, it said loading and again just sat there.
Failing that I figured either bad install and/or bad burn. Re-dwonloaded ISO, burnt new DVD, reinstalled. Did the same again.
I decided I would give it a quick clean just to be safe, so I gave it a blast with some compressed air. Tried again, installed fine, Windows Update fine, first restart and it was dead again.
I have since tried installing without letting Windows Update connect, no joy, I then ran CrystalDisk to check the HD and that reported as all fine.
I'm going to leave it running Memtest overnight/overmorning and see what that says, whilst I download Windows Vista in the hope that if all else fails I can revert to that.
So, can anyone shed any light on this or offer me any help?
View 7 Replies
ADVERTISEMENT
Dec 4, 2012
So I had finally got my first build ever running a few hours ago. Was so excited. I used the program wintoflash to copy my windows installation cd to my flash drive. Popped the flash drive in my new rig and booted it up. It went to installation and took a bit of time to completely install. As it restarted after install the windows startup came up and was continuously going for quite some time and never stopped. So where I am at is that I cant get past the start up screen.
I have tried so much. I pulled out the second stick of ram, the gpu.. ran memory check with no errors, tried re installing windows in many ways (different partitions).I tried running in safe mode but it just gets stuck at disk. The only thing I knoticed is that windows 7 installs faster the second time around, even after deleting all the memory on the hard drive (advanced option during install). I have browsed the web and nothing has helped. Just got a new mobo after replacing the last defected one today, so that cannot be the problem. Completely and utterly frustrated to be presented with another speedbump after all this hard work to get it running.
My rig:
Intel i-5 3rd gen.
Kingston hyperx 2x8gb
AsRock b75m-dgs motherboard.
nvidia gt 440
Western Digital Caviar 250gb 7200.
View 5 Replies
View Related
Apr 30, 2012
I have a Dell Inspiron N4010 running Windows 7. Last night I was printing off PDF files and listening to a CD when the song that was playing got stuck and the print job I'd just ordered stalled. Then a horrible, loud, relentless sort of whirring noise came out of the speakers and wouldn't stop and the computer was completely unresponsive. This has happened before, last December, and I did what I did then...I just forcibly shut it down. When I started it back up, I could choose between starting normally or running Startup Repair, which was recommended. I swear I chose to start normally, but I can't be totally sure. I walked out of the room to do a couple things and when I went back I saw Startup Repair running and it said it could take over an hour. I had to leave for work in 20 minutes, so I decided to just leave it on. 9 hours later, when I got home, it was STILL going. I tried to cancel, and was informed that the current operation could not be canceled. I forced a shut down again (maybe not the brightest thing but I couldn't think of anything else) and even disconnected the battery. Then I started it up...got the same choice and chose to start Windows...and Startup Repair started again. I managed to cancel and shut down with the OFF button again. Restarted and chose Windows...same thing. Restarted and chose Setup Repair, same result. I cannot do or open anything. I don't know if putting the startup discs in it would even register...and I'm not sure I even have any, as Windows 7 came pre-installed. I haven't backed up my hard drive in a loooong time and I can't afford a new machine.
View 8 Replies
View Related
Jan 1, 2013
i recently install new updates on my laptop , after downloading and installing and asking me to restart my computer ,i did choose to restart now . After booting up again it is now stuck on windows 7 logo screen on startup. I tried booting up on safe mode and last known good config. but it didn't work. Also tried to use windows installation disk but it doesn't work either it just keep loading on "setup is starting" also tried "repair my computer" option but it just show me just a plain black screen
i had a Toshiba satellite laptop l745d with a6 vision AMD graphic card,windows 7 ultimate x64 os , 4gb of ram quadcore
View 8 Replies
View Related
Jun 7, 2012
I did a fresh install of windows 7 home premium on a brand new HDD, and after doing windows update, it won't boot to the desktop
View 12 Replies
View Related
Dec 28, 2009
Yesterday I purchased a new laptop (Dell) and I am debating whether or not to do a clean install of Windows 7 to get rid of all the crapware. I am assuming this is the best course of action and if so is there anything special I need to do outside of just reinstalling and wiping the partitions? I have yet to open the box so I am not sure how much junk is preinstalled but I'm assuming it's quite a bit.
View 5 Replies
View Related
Jun 14, 2011
tomorrow I will be getting my new HP laptop, I want to do a clean install of Windows 7, which i know how to do.
to get the full functionality from the laptop after do i simply got tp the HP website and download the drivers and install 1 by 1? do i need to do them in any particular order? HP Pavilion dv6-6051ea this is the model i am getting,
From experience I remeber on my old Sony Vaio once I had done this, things like hot keys did not work and the battery life was just terrible after and it heated up even more!! dont want any of these things hapening to the new laptop now! or should I just remove software that I dont want.
View 6 Replies
View Related
Sep 12, 2012
My girlfriend and sister have laptops, gf has a dell(i know, it was against my advice) and sister has a Acer. Both complain of bloadware, understandably so. Can i use my windows 7 home "premium" disc to install a clean install and use their valid product key? It is a full retail copy that i have legally purchased from a chain retailer. Their laptops have the product key sticker from microsoft. they both have the same version, Windows 7 home "premium." Also, could i install a (small form factor) ssd and then install windows? there is an available drive bay. ]
View 8 Replies
View Related
Oct 10, 2009
Paul Thurrott (Windows 7 Secrets) recommends a clean install on a Vista system. Since I have a HP dv9000 Pavilion Entertainment Laptop Computer, it is capabable of running Windows 7. I have ordered the upgrade version of Windows 7 Professional (since I have Windows Vista Business).
My concern is that with a clean installation, I will lose the installed HP programs that came with the laptop (HP Connect, HP Advisor, etc.). What is the best way of getting those programs. HP technical support was absolutely of no help.
View 3 Replies
View Related
Feb 18, 2012
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
View 1 Replies
View Related
Jun 8, 2011
My laptop completely crashed. I took it to my cousin and he completely wiped it clean and put a dell recovery disk into it (its an acer aspire 3000). Well he couldn't find the license key to 'activate' windows. Then the laptop screen broke and started working the other day. Anyways, I want to put windows 7 maybe on a dvd-r. I read somewhere that you have to get a license key hence expire like what happened before. I do have a dvd burner in this computer. So:
1. Where do I download windows 7 iso.
2. How do I put it on a dvd-r.
3. How do I completely wipe the laptop clean without logging into it because as I said windows expired and I cant use it.
4. How long will it take.
5. How can I make sure it wont expire and everything will work fine on it.
View 4 Replies
View Related
Aug 30, 2012
I bought an ASUS laptop and it came with no disk. I not only do not want the bloatware but I want to switch the HDD out for a newly purchased SSD. How can I do this? I want to use the license that came with the laptop
View 8 Replies
View Related
Nov 3, 2012
So I made a mistake while taking on a friend's problematic sony vaio laptop. They were wanting to install a newly purchased Kaspersky av, but after uninstalling the old version of Kaspersky there was a problem with an unresponsive usb mouse & mouse pad. I wasn't able to resolve the issue through various repair programs and manually reinstalling the driver, which was giving off the error code of not being properly installed or functioning. With owners consent, I decided to let Vaio Care to bring the computer back to factory condition. (I wish the owner had the owners manual to this thing.)I made sure to backup all of the files that the owner needed saved, but failed to make any sort of backup recovery disk for the computer. Not sure if it's too late to do so, but the computer will not boot to windows any longer. I get a white blinking cursor on a black background immediately after Vaio disappears from the screen upon bootup, but cannot do anything with it. I made a windows 7 home premium iso dvd, and when booting from it I reinstalled windows onto one of the 3 partitions on the hd (the largest of the 3 which was labeled "Primary" type). Of the other two partitions, one was labeled "Primary" and was named "System Reserved" but only 101MB, and the other was labeled "System" and was named "Recovery" and is 7.7GB. When installing, the computer does a restart but then boots up from the disk again starting the entire process over again. So I changed it to boot from the HDD, but still get the same problem of a blank cursor and windows not booting up.When attempting the System Recovery Options on the Windows 7 dvd I'm given 3 different partitions (2 of which are 400+GB, labled windows 7 operating system, and located on (D: ) Local Disk). I'm guessing this might stand for the old windows 7 from the factory, and the one I installed. The other partition is 7.7GB and labeled Start VAIO Recovery Center located on (Unknown) Recovery.System Restore, System Image Recovery, and windows Memory Diagnostic aren't doing any good. Startup Repair only gives me an issue for one of the 3 Partitions, the (Recovery Partition), and states that Startup Repair cannot repair this computer automatically, saying that the "Problem Event Name: StartupRepairOffline".
When going through command prompt I see that old data & drivers are still on the disc, but was wondering if it was too late to make some sort of a recovery disc for it? My concerns are that when I do a wipe of the drive and a clean install of Windows 7, I'm going to have many issues without having sony's factoryware installed. Am I able to make my own disk to reinstall Sony's factoryware? What's the best way of getting this computer back to fully functioning?I have access to the drivers on Sony's support site: Sony eSupport - VGN-FW510F - Support
View 6 Replies
View Related
Jan 24, 2013
I'm trying to fix my mom's Lenovo B570. I did a disk cleanup, defrag, and ran a full anti-malware scan. After cleaning off 122 malware items, I restarted the laptop for it to take affect. After entering her password, it's stuck on the welcome screen. Even my dad, who's been in IT for 30 years, can't help me. I've done a forced shut down, but that didn't work and I can't bring up the task manager.
View 4 Replies
View Related
May 13, 2009
I am very lost, I have a IBM ThinkPad T42 with an older 20Gig hard drive that is blank, no OS on it, nothing at all. I tried to perform a custom clean install of Windows 7 and get to the part where you can format the drive or install drivers. When I select to install the drivers it can never find any.
What am I doing wrong? I know a little but I guess not enough, do I need to install fro somewhere else? and what drivers is it looking for?
View 1 Replies
View Related
Nov 2, 2012
problem with the starup
View 1 Replies
View Related
Aug 4, 2011
I just received a brand new laptop less than 24 hours ago. It's an HP, 4 gig RAM, Windows 7 pre-installed, etc.I was using it all night on the internet, putting my music collection on iTunes, etc. I had a lot of fun and was very impressed with this laptop.The second time I turned on the computer (the first being the initial install), Windows Updates was configuring and installing all of these automatic updates that it downloaded the first time I turned off the computer. I couldn't believe my eyes, it actually said it was configuring over 22,000 updates after I booted it up. Yes, THOUSAND. This went on for less than half an hour.Then it went to "installing" the updates, which had a progress bar that reached 100% in maybe 5 minutes.Then it was "starting Windows".Then it got hung up on a blue "bird" desktop background that said Windows 7 Premium at the bottom. The mouse was completely moveable but there was absolutely no action I could take. I left it like this for 30 minutes thinking, "well, it's just installing, but it really should give me a progress bar so I know what the hell is happening."At the 45 minute mark, I couldn't take it anymore. I called HP (the manufacturer of the laptop) for support. The guy asks me for the serial number, and I regretfully wasn't pleasant. I think I said "serial number? I haven't even owned this computer for 12 hours yet!"Anyway, he had me force a shutdown. And then upon booting the computer, I got the "this computer wasn't shut down properly". This is complete BS for a computer that even as I write this,hasn't been in my possession 24 hours yet. I am returning this piece of crap, but I want to know how can I prevent this from happening to the next computer I purchase. Is it necessary to not use Windows Updates, because whoever made these has their head up their ***? I mean "configuring 22,687 updates" on a brand new, 64-bit Windows 7 machine?
View 3 Replies
View Related
Jun 10, 2011
I have a Lenovo Thinkpad T400 with Windows 7 32 bit.When I got home today and wanted to turn my laptop on, I couldn't get past the startup screen, displaying the thinkpad welcome message. I have tried pressing the ThinkVantage button, and all the f buttons, esc, delete, nothing works.I have also tried inserting my Windows disc into the disc drive but that does nothing either.
View 3 Replies
View Related
Sep 4, 2012
I got a new laptop recently (Windows 7 Home Premius SP1), and but there were several dozen updates that wouldn't install. After looking around online a bit, I eventually decided to go to msconfig and change the startup to only boot with windows programs, which solved that particular problem.Now however I can't change it back to normal startup.If I change it back and click apply, then when I go back in the setting is as before. If I just click "okay" and restart with new settings, then it does a selective startup anyway and reverts the settings.
View 8 Replies
View Related
Aug 7, 2011
I have a Sony Vaio laptop which is only a few months old. Here is the problem: i was trying to uninstall the trial version of office 2010 (after failing to activate it properly) and after going into control panel and clicking on "uninstall" to remove the office 2010 software, the computer automatically shut down and restarted and went into startup repair. after running this a couple of times, it said it was unable to fix the problems and asked to send the report to microsoft. then it just shut off by itself. i turned it back on and chose to "start windows normally." even then it went into startup repair and was again unable to fix the problems. then it just became stuck with a blank screen so i had to force power off. now i am not sure what to do. i don't want to keep restarting it only to go into startup repair and burn something out by turning it on and off so frequently.
View 8 Replies
View Related
Jul 12, 2012
I left the computer on for the evening and returned to it this morning only to find the Startup Repair Tool. I have attempt a number of different reboot attempts to no avail. Using F8 during start-up is not being recognized so I cannot boot up in Safe ModeHere is the Startup Up Repair Tools Readout:[CODE]
View 1 Replies
View Related
Feb 22, 2012
I am having a problem with windows 7, when i start the computer it says loading files and then goes directly to startup repair. I cant even get into the computer in safe mode or anything else by pressing f8 when istartup. It just keeps on this startup repair loop.Its states startup repair checking for problems, it attempts repairs but then it says it cant repair this computer automatically. I have tried system restore, sytem image recovery and tried to restore the computer to its factory state. when i try that i get a error 0x4001001300001002. I didnt get any recovery disks when i bought the computer either.
View 12 Replies
View Related
May 3, 2012
I was using EASUS partitioning tool to repartition my hard disc a few days ago as my C: drive was running out of space. I merged the C: drive (which is my system drive) with my D: drive (which contains a lot of data as well). All seems to be going well, but after the usual reconfiguration and restart, my windows 7 is stuck in the startup repair screen. Windows is trying to repair my startup without success, which is resulting in a loop. Fortunately i am able to go into safe mode and save my data.
View 5 Replies
View Related
Jun 25, 2012
I've experienced some issue with my PC recently and formatting it didn't help. Please find attached the required files. The BSOD are essentially random, and sometimes when I power up the PC, it just doesn't startupt, staying stuck in the BIOS or something. I have an Acer predator, Windows 7 64 bits (OEM)
View 9 Replies
View Related
Dec 14, 2012
Ok, so last night, I was so tired, Instead of shutting down my PC thru Start -> Shutdown, I just used the power button from the Chassis, When i started my PC this morning, It was stuck at the windows logo for about 5minutes before actualy starting....I tried using the windows startup repair(Forgot the exact name) But its not repairing....Are there any software that check if theres something wrong with my windows 7 ,Because Im worried that if i restart my PC , It will get stuck in the Windows 7 logo permanently
View 1 Replies
View Related
Feb 9, 2013
I recently got my first SSD after me original HD crashed and lost the windows files. So I decided to get windows 7 for it, I tried installing it from a USB and read the thread about it but with no luck. So I decided to go with my original windows xp cd and then upgrade to windows 7. I started up the comp and had it boot from cd, formatted the new SSD and installed the windows xp files. My comp then rebooted as normal for this and now it stays at the Asus motherboard screen for about 35-40 sec before going to a black screen with the blinking _ at top left and restarts just to do it all over again. I can hit Tab and if gives me the info, detects the Cd-rom, SSD and my usb keyboard. I have the option to hit alt+f2 to load the flash drive, but there is none saved in bios. I hit Del to run setup and everything is detected. WhenI fit f8 to try and boot from the SSD (to let windows continue to install) it goes to the black screen _ flashing or restarts immediately.
View 9 Replies
View Related
Jan 27, 2012
Everytime I start my computer it goes into startup repair searching for problems. I tried going to F8 into safe mode but it goes bac to searching for problems in statup repair. Is there any way I can bypass it from going to startup repair page and go into windows.
View 3 Replies
View Related
Aug 22, 2011
I could not get my laptop to start today. I took out the battery to rest it. I can get it to turn on with the battery out when I plug it in but I am stuck on a red screen that has the compaq logo. In the bottom left it says Press the ESC key for Startup Menu. Nothing happens when I press ESC, I am just stuck on this screen.
View 1 Replies
View Related
May 21, 2012
I use HP Probook 4530s and while Windows starts,wireless connection stuck on searching network and system stop working.Can't do anything,if I click on something cursor becomes busy and nothing happens.System has become completely unusable.When I start Windows in save mode, I get a notice "Turn on Windows Security Center service (important)".But when I click on it error message is: "Windows Security Center service can't be started".I reinstalled Windows but the problems remain the same
View 5 Replies
View Related
Apr 19, 2012
my problem is rather odd (or at least I haven't seen it before). Whenever I boot up the netbook it goes right into startup repair, without the option to cancel it, even if I try to start windows in safe mode (or any other startup options for that matter), the system launches the startup repair.The repair itself runs fine (doesn't freeze or antyhing like that), however it is never able to fix the issue ("Startup Repair is unable to repair this computer automatically").
The problem details read as follows:
Problem signature:
Problem event name: StartupRepairOffline
Problem signature01: 0.0.0.0
Problem signature02: 6.1.7600.16385
Problem signature03: unknown
Problem signature04: 6
[code]....
View 9 Replies
View Related
Jul 9, 2012
My granddaughter has a laptop with Windows 7 pre-installed. I went to turn it on after charging it and the Startup Repair window comes up. I can't get any System Repair options except for Startup Repair which can not repair the computer automatically. This is the problem details listed:
StartupRepairOffline
6.1.7600.16385
6.1.7600.16385
unknown
21200831
autofailover
20
NoRootCause
6.1.7600.2.0.256.1
I don't have much information on this laptop since we are on vacation. The only thing my daughter told me was that Windows was preinstalled. The laptop is ASUS.
View 9 Replies
View Related