Laptop Stuck In Startup Repair And Can't?
Apr 30, 2012
I have a Dell Inspiron N4010 running Windows 7. Last night I was printing off PDF files and listening to a CD when the song that was playing got stuck and the print job I'd just ordered stalled. Then a horrible, loud, relentless sort of whirring noise came out of the speakers and wouldn't stop and the computer was completely unresponsive. This has happened before, last December, and I did what I did then...I just forcibly shut it down. When I started it back up, I could choose between starting normally or running Startup Repair, which was recommended. I swear I chose to start normally, but I can't be totally sure. I walked out of the room to do a couple things and when I went back I saw Startup Repair running and it said it could take over an hour. I had to leave for work in 20 minutes, so I decided to just leave it on. 9 hours later, when I got home, it was STILL going. I tried to cancel, and was informed that the current operation could not be canceled. I forced a shut down again (maybe not the brightest thing but I couldn't think of anything else) and even disconnected the battery. Then I started it up...got the same choice and chose to start Windows...and Startup Repair started again. I managed to cancel and shut down with the OFF button again. Restarted and chose Windows...same thing. Restarted and chose Setup Repair, same result. I cannot do or open anything. I don't know if putting the startup discs in it would even register...and I'm not sure I even have any, as Windows 7 came pre-installed. I haven't backed up my hard drive in a loooong time and I can't afford a new machine.
View 8 Replies
ADVERTISEMENT
Feb 18, 2012
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
View 1 Replies
View Related
Aug 7, 2011
I have a Sony Vaio laptop which is only a few months old. Here is the problem: i was trying to uninstall the trial version of office 2010 (after failing to activate it properly) and after going into control panel and clicking on "uninstall" to remove the office 2010 software, the computer automatically shut down and restarted and went into startup repair. after running this a couple of times, it said it was unable to fix the problems and asked to send the report to microsoft. then it just shut off by itself. i turned it back on and chose to "start windows normally." even then it went into startup repair and was again unable to fix the problems. then it just became stuck with a blank screen so i had to force power off. now i am not sure what to do. i don't want to keep restarting it only to go into startup repair and burn something out by turning it on and off so frequently.
View 8 Replies
View Related
Jul 12, 2012
I left the computer on for the evening and returned to it this morning only to find the Startup Repair Tool. I have attempt a number of different reboot attempts to no avail. Using F8 during start-up is not being recognized so I cannot boot up in Safe ModeHere is the Startup Up Repair Tools Readout:[CODE]
View 1 Replies
View Related
Feb 22, 2012
I am having a problem with windows 7, when i start the computer it says loading files and then goes directly to startup repair. I cant even get into the computer in safe mode or anything else by pressing f8 when istartup. It just keeps on this startup repair loop.Its states startup repair checking for problems, it attempts repairs but then it says it cant repair this computer automatically. I have tried system restore, sytem image recovery and tried to restore the computer to its factory state. when i try that i get a error 0x4001001300001002. I didnt get any recovery disks when i bought the computer either.
View 12 Replies
View Related
Jan 27, 2012
Everytime I start my computer it goes into startup repair searching for problems. I tried going to F8 into safe mode but it goes bac to searching for problems in statup repair. Is there any way I can bypass it from going to startup repair page and go into windows.
View 3 Replies
View Related
Apr 19, 2012
my problem is rather odd (or at least I haven't seen it before). Whenever I boot up the netbook it goes right into startup repair, without the option to cancel it, even if I try to start windows in safe mode (or any other startup options for that matter), the system launches the startup repair.The repair itself runs fine (doesn't freeze or antyhing like that), however it is never able to fix the issue ("Startup Repair is unable to repair this computer automatically").
The problem details read as follows:
Problem signature:
Problem event name: StartupRepairOffline
Problem signature01: 0.0.0.0
Problem signature02: 6.1.7600.16385
Problem signature03: unknown
Problem signature04: 6
[code]....
View 9 Replies
View Related
Jul 9, 2012
My granddaughter has a laptop with Windows 7 pre-installed. I went to turn it on after charging it and the Startup Repair window comes up. I can't get any System Repair options except for Startup Repair which can not repair the computer automatically. This is the problem details listed:
StartupRepairOffline
6.1.7600.16385
6.1.7600.16385
unknown
21200831
autofailover
20
NoRootCause
6.1.7600.2.0.256.1
I don't have much information on this laptop since we are on vacation. The only thing my daughter told me was that Windows was preinstalled. The laptop is ASUS.
View 9 Replies
View Related
Jun 2, 2011
Recently my desktop has started having issues. I purchased it new in january and within this last month when I start it, it gets stuck in the startup screen. When I try to do startup repair it always is unsuccessful. When I view the details it lists this "problem signature 07: Bad patch" I have tried doing a system restore to every point it lists and it says "the instruction at 0xfba8ca53 referenced memory at 0x06e2f90f. The memory could not be read. Click ok to terminate". When I try to enter safe mode it doesn't work either.
View 2 Replies
View Related
Jun 7, 2012
I did a fresh install of windows 7 home premium on a brand new HDD, and after doing windows update, it won't boot to the desktop
View 12 Replies
View Related
Dec 9, 2012
Before I start this happened after updating the motherboard BIOS from version 1.4 to 1.7, I went to 1.6 after just in case the latest BIOS had a bug
I've been stuck on the startup repair for almost 5 hours saying that it's repairing my hard drive or whatever (i forget exactly what it said), I first booted linux to check the SMART data on the HDD (i now know that I can do it with HBCD too) it came back all fine. I am now running Hirens Boot CD and DRevitalise to scan and repair bad sectors.
System Specs:
i5 3570k @ stock
MSI Z77 GD55 BIOS Version 1.6
8GB Kingston HyperX 1600mhz
Running HD4000 graphics
500GB Blue WD HDD
I do have a DxDiag on the desktop of the pc in question which I could get if needed (to tired to do now)
Edit: Reinstalling is not an option I will consider unless there is nothing else that I can do.
Edit: Turns out there is a tool from WD for HDD testing, am running that now instead if the last one.
View 6 Replies
View Related
Jan 22, 2012
So, I'm not exactly sure what I did. I was clearing up some space on my computer after using the Norton Removal Tool to get rid of this Norton trial popup that came up everytime I booted my computer. Now, after it told me to restart, it seems to be stuck in an endless boot cycle that resets itself after showing the Windows logo. I've since tried running startup repair, which freezes as it shows the progress bar for 'Windows is loading files'. Safe mode will not work, either. It just sends it back into the boot cycle. Not sure what to do at this point. My computer came pre-installed with Windows 7 Home Premium 64bit, so I don't have any startup discs.
View 3 Replies
View Related
Dec 10, 2010
Windows wont boot up I get stuck on the "starting windows screen" Startup Repair cannot repair this computer automatically:
Problem signature:
�Problem Event Name: StartupRepair Offline
�Problem Signature 01: 6.1.7600.16385
�Problem Signature 02: 6.1.7600.16385
�Problem Signature 03: unknown
�Problem Signature 04: 21200718
�Problem Signature 05: AutoFailover
�Problem Signature 06: 10
�Problem Signature 07: BadDriver
�OS Version: 6.1.7600.2.0.0.256.1
�Locale ID: 1033
View 1 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Oct 10, 2009
Whilst my sister and family were away this weekend I offered to install Windows 7 Home Premium (x86) on her Toshiba Equium L40-10U laptop.
It was previously running Windows Vista Home Premium, however as it was infested with all kinds of nasties I figured I would kill two birds with one stone.
Anyway, I downloaded the ISO from Technet and burnt it to DVD, updated the BIOS on the laptop (worked fine) and proceeded to install Windows 7 (fresh, not upgrade, completely wiped and started from scratch).
Everything went fine, went through setup and logged on, Windows Update kicked in, perfect.
Had a play around and the machine was running like a dream, so I started installing stuff. As I didn't require ANY extra drivers I installed the RTM version of Microsoft Security Essentials first. I then moved on to Spybot - Search & Destroy etc.
When I restarted the machine it started to boot and got to the Starting Windows screen, however the Windows animation didn't appear, I waited, and waited, and nothing. Restarted again and it went to the Startup Repair option, did that, found nothing, restarted, and again it was stuck at the Starting Windows screen.
I rebooted and tried for Safe Mode, which very weirdly failed, it said loading and again just sat there.
Failing that I figured either bad install and/or bad burn. Re-dwonloaded ISO, burnt new DVD, reinstalled. Did the same again.
I decided I would give it a quick clean just to be safe, so I gave it a blast with some compressed air. Tried again, installed fine, Windows Update fine, first restart and it was dead again.
I have since tried installing without letting Windows Update connect, no joy, I then ran CrystalDisk to check the HD and that reported as all fine.
I'm going to leave it running Memtest overnight/overmorning and see what that says, whilst I download Windows Vista in the hope that if all else fails I can revert to that.
So, can anyone shed any light on this or offer me any help?
View 7 Replies
View Related
Feb 11, 2013
I have a pavillion dv6- laptop that's stopped being able to boot up windows? It only goes to the screen with the option of starting windows normally (which brings me back to the same screen) or going to startup repair. When I go to repair it says Got some important data in c drive can't install new windows all data will wipe up what to do now?
View 3 Replies
View Related
Jan 8, 2012
My laptop has Windows 7 installed.My Toshiba Satellite L650 started slowing down and freezing every hour or so while for a few weeks which progressively got more often. I thought it was the new modem/router the cable company installed and maybe got a bad virus. I purchased Norton 2012 and after talking w/Toshiba support did a system restore by holding down the "0" button. This seemed to work but not for long, a week later the same issues were occurring. I did another system restore and it worked for a couple of days. Chkdsk did find bad clusters. Now start up repair keeps trying to fix it when I turn it on but it can't.I have ordered a new hard drive from Tiger Direct a few days ago, it is on back order, not sure when I'll get it.I'm afraid to use the start up repair disk that I made on the new hard drive when it does come.My questions are: is there any other way I should be going about fixing this 14 month old laptop?Also, I don't have the original software disks, they didn't come with the computer so I either have to order a copy from Toshiba or should I use that repair disk? Can software cause an issue like this?
View 14 Replies
View Related
Dec 9, 2012
I'm new to startup repair and not sure of what it is actually doing but when i start my laptop i get a choice of start windows normally or startup and repair. If i click start windows normally it loads as normal but then i get black screen and the mouse nothing else. When i choose startup repair its attempting repairs and not getting any further.
View 1 Replies
View Related
Dec 27, 2012
I turned on my laptop this morning after hibernation and said there was a fatal error coming out of hibernation, so I turned it off and chose "Launch Startup Repair" which was recommended, instead of "Start Windows Normally." After about half an hour it looked as though all had been fixed after a system restore. However, on restarting my laptop everything went slowly, start up was slower than usual. I couldn't open anything on the desktop or click the start menu without it freezing. After getting sick of this, I clicked shut down which also took forever as well.
View 3 Replies
View Related
Jan 1, 2013
i recently install new updates on my laptop , after downloading and installing and asking me to restart my computer ,i did choose to restart now . After booting up again it is now stuck on windows 7 logo screen on startup. I tried booting up on safe mode and last known good config. but it didn't work. Also tried to use windows installation disk but it doesn't work either it just keep loading on "setup is starting" also tried "repair my computer" option but it just show me just a plain black screen
i had a Toshiba satellite laptop l745d with a6 vision AMD graphic card,windows 7 ultimate x64 os , 4gb of ram quadcore
View 8 Replies
View Related
Dec 3, 2011
My hp laptop suddenly always starting with startup repair. It has been working fine for months and now it cant startup. Could this be caused by running a java game for too lonng? Or possibly overheating?
View 1 Replies
View Related
Dec 15, 2010
My problem is this; a freind has got a HP Laptop, 2gb memory, 80gb hard drive, Intell graphics and Win 7 Home Ed as his O/S.He lent his laptop to a freind who seems to have screwed it up as for some reason when it starts up, it wont now go beyond StartUp Repair. I have tried both system restore as well as command prompt to format the disk to no
View 1 Replies
View Related
Oct 21, 2012
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies
View Related
Jun 29, 2012
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
View 2 Replies
View Related
Nov 1, 2012
So I've got a gateway laptop here that one day was booted up and went to a boot menu screen stating there were errors with the option to launch startup repair. After doing so there has been no sucess, after a looooong process of checking for errors, it says it's unrepairable, says to exit/reboot and goes back to the same screens.
I've tried with a Windows 7 disc in there (vs using the recovery option built into the laptop) and still no success. I've tried restore to an earlier restore point with no success. I've tried to get into safe mode with no success and I've tried the 'last known good configuration' option with no success either!
I booted using 'spinrite' to do a deep check of the HD itself. It gets about 6-7% in and than suddenly completely shuts off! Powers off as if someone yanked the plug. The Cpu area and heatpipes underneath are VERY hot after this point so I suspect it's an overheat protection kicking in, but why it's overheating while running spinrite I can't figure out.
So I removed the HD and have connected it to my PC. It was accessible, could see the win and system folders etc. I right clicked the drive from my PC now and ran 'tools' error-checking. It makes some progress while counting sectors but eventually gets to a certain sector number and hangs there with no further progress of the error check.
At this point I'm planning to just yank any important files off of it (since it's still accessible when plugged into my PC) and reformatting/reinstalling Windows 7 but I am curious, these symptoms, are they synonymous with an imminent drive failure, or is it just a corrupt system?
View 2 Replies
View Related
May 19, 2011
Specs:
Toshiba laptop
Win7 home premium 64-bit
3gb RAM
freshly formatted hard drive
original media from Toshiba with win7
I am trying to completely wipe this laptop off and start fresh. The recovery partition has been removed as part of my search for a resolution for the problem. When I try to install windows 7 on this machine I start by selecting to format the entire hard drive. It completes this and then starts the installation of windows 7. It take a very long time for windows to unpack the files and copy them to disc. After about an hour and a half it starts asking me for the User name/location/time settings, etc.
After that it reboots to startup windows for the first time. It immediately tells me that windows cannot start and startup repair will need to be run or I can select to ignore this and try to start normally. Either option yields no improvement. After working with each of those options I just decided to reformat the drive and start the install again. Even after the drive was wiped and fully formatted I get the same error once the windows installation finishes.
View 4 Replies
View Related
May 11, 2011
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies
View Related
Jan 14, 2011
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies
View Related
Oct 5, 2012
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies
View Related
Mar 24, 2012
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies
View Related
Jul 31, 2010
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies
View Related