Windows 7 Installation Failure On Toshiba Laptop - Run Startup Repair
May 19, 2011
Specs:
Toshiba laptop
Win7 home premium 64-bit
3gb RAM
freshly formatted hard drive
original media from Toshiba with win7
I am trying to completely wipe this laptop off and start fresh. The recovery partition has been removed as part of my search for a resolution for the problem. When I try to install windows 7 on this machine I start by selecting to format the entire hard drive. It completes this and then starts the installation of windows 7. It take a very long time for windows to unpack the files and copy them to disc. After about an hour and a half it starts asking me for the User name/location/time settings, etc.
After that it reboots to startup windows for the first time. It immediately tells me that windows cannot start and startup repair will need to be run or I can select to ignore this and try to start normally. Either option yields no improvement. After working with each of those options I just decided to reformat the drive and start the install again. Even after the drive was wiped and fully formatted I get the same error once the windows installation finishes.
View 4 Replies
ADVERTISEMENT
Jul 1, 2012
Dell laptop bought 8 months ago. My son said it started running real slow now windows won't load at all. Goes to start up repair I tried all the options and it didn't work:
Problem Error Name Startup Repair
Problem Signature 1: 6.1.7600.16385
Problem Signature 2: 6.1.7600.16385
Problem Signature 3: unknown
Problem Signature 4: 371
Problem Signature 5: Auto Failover
Problem Signature 6: 1
Problem Signature 7: failure during setup
OS version: 6.1.7601.2.1.0.2561
Local ID: 1033
After running setup repair it said Root cause found. Failure while setup is in progress.
View 10 Replies
View Related
Aug 6, 2011
I started the StartUp Repair again and it has this error: Code: Root cause found:
Boot manager is missing or corrupt.
Repair action: File repair.
Result: Failed. Error code = 0x15
time taken = 0 ms
What does this mean?
View 2 Replies
View Related
Jan 26, 2011
I have an issue which I need resolved. My hard drive had about 5 different partitions, one for Win7 x86, Win7 x64, Misc, Encrypted Data and Virtual Machines. The Encrypted Data partition was secured with BitLocker - The OS-partitions was _not_ secured with BitLocker. Now what happened was that I had to run the startup repair utility on my Win7 x64 installation and this completely messed up things for me. I have lost the Encrypted Data and Virtual Machine-partition.
I do not care about the VMs, but the Data contains vital information which I have not backed up yet. On top of losing the two partitions, a new partition called HP_tools re-appeared. This partition was removed when I scratched the OEM-installation approx. a year ago. I urgently need to recover this Data-partition. I do have unallocated space (between other partitions) on my hard drive, but none at the exact size of my encrypted partition.
View 1 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Nov 1, 2012
So I've got a gateway laptop here that one day was booted up and went to a boot menu screen stating there were errors with the option to launch startup repair. After doing so there has been no sucess, after a looooong process of checking for errors, it says it's unrepairable, says to exit/reboot and goes back to the same screens.
I've tried with a Windows 7 disc in there (vs using the recovery option built into the laptop) and still no success. I've tried restore to an earlier restore point with no success. I've tried to get into safe mode with no success and I've tried the 'last known good configuration' option with no success either!
I booted using 'spinrite' to do a deep check of the HD itself. It gets about 6-7% in and than suddenly completely shuts off! Powers off as if someone yanked the plug. The Cpu area and heatpipes underneath are VERY hot after this point so I suspect it's an overheat protection kicking in, but why it's overheating while running spinrite I can't figure out.
So I removed the HD and have connected it to my PC. It was accessible, could see the win and system folders etc. I right clicked the drive from my PC now and ran 'tools' error-checking. It makes some progress while counting sectors but eventually gets to a certain sector number and hangs there with no further progress of the error check.
At this point I'm planning to just yank any important files off of it (since it's still accessible when plugged into my PC) and reformatting/reinstalling Windows 7 but I am curious, these symptoms, are they synonymous with an imminent drive failure, or is it just a corrupt system?
View 2 Replies
View Related
Feb 11, 2013
I have a pavillion dv6- laptop that's stopped being able to boot up windows? It only goes to the screen with the option of starting windows normally (which brings me back to the same screen) or going to startup repair. When I go to repair it says Got some important data in c drive can't install new windows all data will wipe up what to do now?
View 3 Replies
View Related
Jan 8, 2012
My laptop has Windows 7 installed.My Toshiba Satellite L650 started slowing down and freezing every hour or so while for a few weeks which progressively got more often. I thought it was the new modem/router the cable company installed and maybe got a bad virus. I purchased Norton 2012 and after talking w/Toshiba support did a system restore by holding down the "0" button. This seemed to work but not for long, a week later the same issues were occurring. I did another system restore and it worked for a couple of days. Chkdsk did find bad clusters. Now start up repair keeps trying to fix it when I turn it on but it can't.I have ordered a new hard drive from Tiger Direct a few days ago, it is on back order, not sure when I'll get it.I'm afraid to use the start up repair disk that I made on the new hard drive when it does come.My questions are: is there any other way I should be going about fixing this 14 month old laptop?Also, I don't have the original software disks, they didn't come with the computer so I either have to order a copy from Toshiba or should I use that repair disk? Can software cause an issue like this?
View 14 Replies
View Related
Apr 30, 2012
I have a Dell Inspiron N4010 running Windows 7. Last night I was printing off PDF files and listening to a CD when the song that was playing got stuck and the print job I'd just ordered stalled. Then a horrible, loud, relentless sort of whirring noise came out of the speakers and wouldn't stop and the computer was completely unresponsive. This has happened before, last December, and I did what I did then...I just forcibly shut it down. When I started it back up, I could choose between starting normally or running Startup Repair, which was recommended. I swear I chose to start normally, but I can't be totally sure. I walked out of the room to do a couple things and when I went back I saw Startup Repair running and it said it could take over an hour. I had to leave for work in 20 minutes, so I decided to just leave it on. 9 hours later, when I got home, it was STILL going. I tried to cancel, and was informed that the current operation could not be canceled. I forced a shut down again (maybe not the brightest thing but I couldn't think of anything else) and even disconnected the battery. Then I started it up...got the same choice and chose to start Windows...and Startup Repair started again. I managed to cancel and shut down with the OFF button again. Restarted and chose Windows...same thing. Restarted and chose Setup Repair, same result. I cannot do or open anything. I don't know if putting the startup discs in it would even register...and I'm not sure I even have any, as Windows 7 came pre-installed. I haven't backed up my hard drive in a loooong time and I can't afford a new machine.
View 8 Replies
View Related
Dec 9, 2012
I'm new to startup repair and not sure of what it is actually doing but when i start my laptop i get a choice of start windows normally or startup and repair. If i click start windows normally it loads as normal but then i get black screen and the mouse nothing else. When i choose startup repair its attempting repairs and not getting any further.
View 1 Replies
View Related
Dec 27, 2012
I turned on my laptop this morning after hibernation and said there was a fatal error coming out of hibernation, so I turned it off and chose "Launch Startup Repair" which was recommended, instead of "Start Windows Normally." After about half an hour it looked as though all had been fixed after a system restore. However, on restarting my laptop everything went slowly, start up was slower than usual. I couldn't open anything on the desktop or click the start menu without it freezing. After getting sick of this, I clicked shut down which also took forever as well.
View 3 Replies
View Related
Dec 3, 2011
My hp laptop suddenly always starting with startup repair. It has been working fine for months and now it cant startup. Could this be caused by running a java game for too lonng? Or possibly overheating?
View 1 Replies
View Related
Dec 15, 2010
My problem is this; a freind has got a HP Laptop, 2gb memory, 80gb hard drive, Intell graphics and Win 7 Home Ed as his O/S.He lent his laptop to a freind who seems to have screwed it up as for some reason when it starts up, it wont now go beyond StartUp Repair. I have tried both system restore as well as command prompt to format the disk to no
View 1 Replies
View Related
Sep 28, 2011
My Toshiba laptop isn't working well. It started get VERY slow at start up then it gave me options for safe mode. It was very slow either way, so I just restored it to factory settings. It worked perfectly, then the next day it happened again.I restored it again to factory settings, now today it's doing the same thing.
View 2 Replies
View Related
Oct 21, 2012
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies
View Related
Jun 29, 2012
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
View 2 Replies
View Related
Aug 3, 2012
Recently i have installed a game called Command and conquer generals , and Command and conquer generals zero hour after installing it i download a game mods. My toshiba laptop satellite works fine , but after booting it up again the day after i installed those games my laptop stuck's up on welcome screen after putting up my laptops password . I try to fix this problem by going into safe mode and scanning for errors in "error-checking" option on computer's property . After scanning i managed to get through the welcome screen. But my new problem is that my laptop freezes after booting up , when i point my cursor in the taskbar it keeps on loading and never stop and when i open any program is suddenly stops , i cannot open anything.
View 1 Replies
View Related
May 11, 2011
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies
View Related
Jan 14, 2011
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies
View Related
Feb 18, 2012
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
View 1 Replies
View Related
Oct 5, 2012
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies
View Related
Mar 24, 2012
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies
View Related
Jul 31, 2010
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies
View Related
Mar 10, 2011
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies
View Related
Jul 24, 2012
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
Aug 17, 2010
I hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky.
I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
View 9 Replies
View Related
Feb 16, 2012
Windows 7 boots as normal to "Starting Windows" with MS icon but then goes blank. F8 and "Starting Windows normally" does not work. F8 into Boot Menu with a Windows 7 recovery disk in the drive reads it briefly but does not recognise it. If I can get beyond this stage I have a system image on a connected hard drive.
View 3 Replies
View Related
Sep 22, 2009
I got the error code 0x80070005 when trying to install Windows 7, the error displayed.Windows cannot install required files. Network problems may be preventing Windows from accessing the file. Make sure the computer is connected to the network and restart the installation. Error code: 0x80070005..I've got a 64 bit Vista running on an Asus G50V Laptop, and I'm trying to upgrade to the 64 bit Professional
View 4 Replies
View Related
Feb 8, 2011
I have just had a new 1Tb hdd fitted by a shop after my original failed but since he fitted it it keeps crashing ior corrupting Is it possible to reload the Win 7 Home premium to a clean start as I can'tr get it to load
View 3 Replies
View Related
Jul 21, 2010
My computer is a Dell Inspiron Laptop with Windows 7. I just got it like a month ago. Recently it has decided to be a real bugger. Everytime I try to start it up, it either gets stuck on the "welcome" screen or advances past it and goes to a pitch black screen with just a cursor. I've also found that if I try to shut the computer down without just pressing the power button, it can't turn off.
View 1 Replies
View Related
