BitLocker Encryption Failure After Running Startup Repair Utility
Jan 26, 2011
I have an issue which I need resolved. My hard drive had about 5 different partitions, one for Win7 x86, Win7 x64, Misc, Encrypted Data and Virtual Machines. The Encrypted Data partition was secured with BitLocker - The OS-partitions was _not_ secured with BitLocker. Now what happened was that I had to run the startup repair utility on my Win7 x64 installation and this completely messed up things for me. I have lost the Encrypted Data and Virtual Machine-partition.
I do not care about the VMs, but the Data contains vital information which I have not backed up yet. On top of losing the two partitions, a new partition called HP_tools re-appeared. This partition was removed when I scratched the OEM-installation approx. a year ago. I urgently need to recover this Data-partition. I do have unallocated space (between other partitions) on my hard drive, but none at the exact size of my encrypted partition.
So I had the power go off while I was running bitlocker (to go?) on my external hdd. I was not able to pause it before this happened. I was also running BL on an internal drive. Both were interrupted. I was able to resume and finish the internal drive. I was not able to resume the external. The BL application just stop responding when I try to resume/unlock the disk. It also seems I can't restart the machine normally when BL is trying to unlock the drive.
I read somewhere on the ms support site that even with power failure, resuming is possible. This might have only applied to an internal drive. I do recall seeing the pause button for the external, with a note that I needed to pause to stop in case of data corruption or something like that. Is there a way to recover my external? Do I need to let the program "not respond" for the same time or maybe longer than the time it spent encrypting it? Could I remove the drive and make it an internal?
I bought a Toshiba Netbook NB500 with Windows 7 starter a week ago and this weekend when I turned it on it started to run the Startup Repair utility. This kept looping around and wouldn't repair. I tried fixing it using some suggestions on this site and other sites but for some reason (my computer illiteracy) I just couldn't get it to work. I let the startup repair run multiple times for about 6 hours. Finally got fed up and returned the computer to the store.
My main question is now that I have returned it and even though I had a log on password can someone get on the computer to access what I had on it? There is nothing too important just worried about passwords and such. Should I err on the side of caution and change all my passwords or is the computer toast and no one will be able to get on.
I bought Windows XP Ultimate and setup my computer with Bitlocker, using a USB key for the encryption key.After setting everything up and confirming it all works, I thought I would make a copy of this USB key. When I look at the USB stick using Windows Explorer or via a Dir command through a DOS prompt, I don't see any files on the USB stick.Is this normal? Is there no way to make a copy of the stick, I would have thought I would have seen files on it.
I have been having some issues when trying to turn Bitlocker on in C:
I have followed the instructions as per this forum to enable a Startup key in gpedit.msc as I don't have TPM which worked.
After following the instructions, Windows Bitlocker asked me to insert a USB to save the startup key to. This appeared to save and then moved onto the next step where I took down the recovery key etc. and finally restarted to make sure my system was compatible before encryption started.
Upon restart, Windows said that it couldnt find a key on the USB drive. After further investigation I found that windows did not save the key to the USB after all even checked as a hidden file. It will save the text file (recovery key) to usb but not the bek file for the startup key.
I have tried this several times but each time it wont save although the system doesn't say there has been a problem and moves on to the next stage.
The USB is a 2gb cruzer with the smart drive software removed and re-formatted to NTFS. I have also tried this on other USB drives with no luck and the USB drives work as Iam able to write other things to it?
Dell laptop bought 8 months ago. My son said it started running real slow now windows won't load at all. Goes to start up repair I tried all the options and it didn't work:
Problem Error Name Startup Repair Problem Signature 1: 6.1.7600.16385 Problem Signature 2: 6.1.7600.16385 Problem Signature 3: unknown Problem Signature 4: 371 Problem Signature 5: Auto Failover Problem Signature 6: 1 Problem Signature 7: failure during setup OS version: 6.1.7601.2.1.0.2561 Local ID: 1033
After running setup repair it said Root cause found. Failure while setup is in progress.
New drive 1gb external, running bitlocker for the first time. Left it overnight cos it was taking forever, (which is the norm)
Woke up this morning and it was stuck on something like 47.1% requesting the bitlocker password, put that in and it starts encrypting again.... But every few random mins it falls over with an error message:
An Error Occurred The System cannot find the file specified. And prompts me to put my bitlocker password back in, for which I do, and the encrpytion starts again.
Its like at 50% now, after it falling over 3 times in the last 30mins.. I'm not exactly what to do.. I cant sit here for the next 10hrs waiting for it to fall over every few mins asking for the password.
I'd be up for scrapping the whole encrpytion and starting all over again.. But not exactly sure on how to permantely un-crypt the drive and reformat it ? Perhaps running a scandisk before doing so... It was a brand new drive.
I can actually still access the data, because autoplay opens after every error allowing me to see and open the files.
While using BitLocker Drive Encryption feature, i selected the settings for using the USB to store the security key. But, once I restarted my PC, BitLocker didn't recognized the USB and went into recovery mode.
Can anyone suggest as to why the USB key was not taken into consideration?
I am using Windows 7 RC and I try to encrypt 500 GB external drive. There was a power failure when the process was 30% completed. When I try to access to the drive it says.BitLocker drive encryption failed to recover from an abruptly terminated conversion.This could be due to either all conversion logs being corrupted or the media being write-protected.The password is right because when I type a different password I see message.The password you typed is not correct.
I have a new notebook and I have used windows bit-locker on the C drive. My notebook didn't come with a TPM chip so I used a work around to get it working by using a flash drive with the keys installed on it, so I just plug the stick in at the boot process for everything to load up successfully. However Ive installed VMware and its taken up a lot of space on drive C.
What I want to do now is allocate some of the free space on the D: drive to the C drive, if that makes sense? Just to clarify my D: drive has no bit-locker encryption on it, but my C: drive does. Want I want to know is can i just use a partition tool to give the C drive some more space or will this cause problems as its using the bit-locker software? Also if I can do this, whats the best partition tool to use.
Specs: Toshiba laptop Win7 home premium 64-bit 3gb RAM freshly formatted hard drive original media from Toshiba with win7
I am trying to completely wipe this laptop off and start fresh. The recovery partition has been removed as part of my search for a resolution for the problem. When I try to install windows 7 on this machine I start by selecting to format the entire hard drive. It completes this and then starts the installation of windows 7. It take a very long time for windows to unpack the files and copy them to disc. After about an hour and a half it starts asking me for the User name/location/time settings, etc.
After that it reboots to startup windows for the first time. It immediately tells me that windows cannot start and startup repair will need to be run or I can select to ignore this and try to start normally. Either option yields no improvement. After working with each of those options I just decided to reformat the drive and start the install again. Even after the drive was wiped and fully formatted I get the same error once the windows installation finishes.
My girlfriend's Dell Mini 9 netbook decided to start acting up recently. She turned it on, and it decided to run startup repair. The repair always fails for no apparent reason, and the computer shuts itself down. I tried running a startup repair from a Windows 7 repair disc. The repair from the disc claimed that it fixed issues, and yet when I started the computer up again it ran startup repair again. Its stuck in a cycle I cannot get past. I tried running system restore from the repair disc, but it always fails as soon as its finalized. asically, what the heck is wrong? I unfortunately have little software experience, the majority of what I know is hardware related.
I just ran startup repair from the disc again and read the error details. It says that the root cause is "startup repair has tried several times but still cannot determine the cause of the problem." It still says the errors were fixed. But after yet another boot-up, the repair still automatically runs and fails.etails of the failure:Startup repair cannot repair this computer automatically.[CODE]
I've got 2x1TB partition using raid 0 on C: drive which I recently shrunk a little to make a 10GB partition to put "secure" items into. When I try to enable bitlocker encryption on the partition, it gets part of the way through and then my computer dies horribly. It's not a BSOD, the screen is black and windows tells me it can't find its loader.I reboot a few times and everything is back to normal.Delete the partition, re-create it, format it and try again, same thing.
I left my computer - which is an Acer Aspire One, that I purchased, refurbished, a few months ago from a local dealer and came preloaded with Windows Starter 7 - closed, but without turning it off, for a few hours while I ran out to a cafe with a friend (which I've done hundreds of times before. But, when I came back, it was frozen on the firefox tab I had open when I left. So, I figured, I'll just turn it off with the power button and turn it back on. When I did this, Windows stalled out while opening and wasn't going anywhere, and then the screen went black and it went back to the Acer splash screen and told me that Windows had failed to start and suggested I run Startup Repair. So I did, and, after about 5 minutes, it went to a blue screen with a white hummingbird and some curly bits behind it, and a slightly distorted cursor that moves on the screen when I use my keypad and hasn't moved since. That was about 20 minutes ago. I'm really stressing out, because I don't know what to do, and there are files on there that I need for work.
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
ive been getting BSODs and finally figured out how to debug it with WinDbg (x86) and set the symbols for windows but i cant read the text. ive tried reinstalling my GPU and Java but no luck. when i try to run intel driver update utility as soon as i run it i get a BSOD ive got the minidump here if anyone knows how to read it, so here you go.
Microsoft (R) Windows Debugger Version 6.2.8400.0 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:UserskalyeDesktop�81212-36504-01.dmp]
I have been getting freezes a lot. I have run all the hardware diagnostics and everything checks out ok. I tried to run chkdsk from a c prompt but I get the message "Access denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." This is my home computer and I am the only one using it so I have not set up any user accounts. Why don't I have full privileges?
I was on the internet this morning and suddenly I lost connection to the internet, I'm connected by ethernet so I tried a different cord and it wouldn't recognize anything, that there was a connection what so ever. So I restored to a previous date assuming the new update, as usual, screwed my laptop up. Same issue happened, but then this time as administrator I cant run chkdsk, tells me access is denied and that I don't have sufficient privileges, even though I am the administrator and only user on the laptop. Also troubleshooting things, anything, it can't continue due to an error, it the details of the error it used to say Restricted but now it says Elevated, like the chkdsk thing as well which mentions that I have to invoke the utility running in elevated mode. My internet after shutting down is back but I'm still confused.
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]