Chkdsk From C Prompt - Invoke This Utility Running In Elevated Mode

Apr 24, 2011

I have been getting freezes a lot. I have run all the hardware diagnostics and everything checks out ok. I tried to run chkdsk from a c prompt but I get the message "Access denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." This is my home computer and I am the only one using it so I have not set up any user accounts. Why don't I have full privileges?

View 1 Replies


ADVERTISEMENT

Chkdsk As Administrator - Invoke Utility Running In Elevated Mode

Nov 20, 2012

I was on the internet this morning and suddenly I lost connection to the internet, I'm connected by ethernet so I tried a different cord and it wouldn't recognize anything, that there was a connection what so ever. So I restored to a previous date assuming the new update, as usual, screwed my laptop up. Same issue happened, but then this time as administrator I cant run chkdsk, tells me access is denied and that I don't have sufficient privileges, even though I am the administrator and only user on the laptop. Also troubleshooting things, anything, it can't continue due to an error, it the details of the error it used to say Restricted but now it says Elevated, like the chkdsk thing as well which mentions that I have to invoke the utility running in elevated mode. My internet after shutting down is back but I'm still confused.

View 9 Replies View Related

Tip For Elevated Command Prompt?

Feb 9, 2012

This probably is not new to many, but I find it useful.There are times I want an elevated command prompt. I usually type in "cmd", right click on it and run as administrator. If you need an elevated command prompt now and then, simply create a shortcut to "cmd". Right click on the shortcut, left click on properties. Click the shortcut tab and select "advanced". Finally, you can select "run as administrator".Like I said, just something I didn't think about before, but it's handy to have.

View 6 Replies View Related

Elevated Command Prompt Over SSH?

Jan 27, 2013

I'm using a SSH server to remotely access my notebook from work. It works well for SFTP and remote command line access using a dedicated, non-admin, user account.Problem is when I want to run something that requires admin permission under that connection. The server runs cmd.exe under the context of a non-admin user I've created for it, so I'm limited in what I can do. Question is, how can I "elevate" that remote command prompt to execute admin-only programs and commands? UAC of course will not help under that conditions.

View 5 Replies View Related

Elevated Command Prompt

Jan 20, 2009

How to Open a Elevated Command Prompt in Windows 7 ?

View 0 Replies View Related

Elevated Command Prompt Shortcut

Nov 14, 2009

How to Create a Elevated Command Prompt Shortcut in Windows 7 ?

View 0 Replies View Related

Hibernate Not Available After Powercfg -h On From Elevated Command Prompt?

Oct 8, 2010

I have a brand new desktop machine in my office, running enterprise 64 bit version of windows 7 read that to enable hibernation, you need to run powercfg -h on from elevated command prompt. I did that, do a logoff, restart, shutdown, but it's still not appearing.

View 2 Replies View Related

Elevated Program Shortcut Without UAC Prompt - Create

Jun 4, 2009

How to Create a Elevated Program Shortcut without a UAC Prompt ?

View 0 Replies View Related

Programmatic Way With BAT File Determining If Elevated Command Prompt

Oct 16, 2010

Is there any programmatic way within a BATch file of determining whether it has been started from an elevated command prompt (run as Administrator) or a normal command prompt? I note the difference between the Current Directory at start of the BATch file, but wonder if there is a better way. When in elevated mode I don't get a UAC prompt when using DISKPART. The UAC prompt only happens when running it in a normal command prompt window.

Are you aware of any command which simultaneously would give a different errorlevel when executed in an elevated command prompt than in a normal command prompt, and not produce a UAC prompt in normal mode? If this is the case, unless I can find something to distinguish between elevated command prompts and normal command prompts, then I will have to try the %cd% variable at the start of BATch files, to see whether it is consistent even across user modifications of the command prompt shortcut's Target Directory...

View 1 Replies View Related

How To Stop Chkdsk Utility

Mar 3, 2011

I was trying to partition my 500gb hdd in my laptop. So i could run windows xp and 7 on the machine. But before partitioning it it said i needed to run the Chkdsk utility. so i had it run on startup. Now for about the past 6-10 hours it has bean on stage 4 of 5 going from 32% to 34%. How do i stop it? I dont wont to hurt my computer. i have windows 7 home premium installed on the machine that has the problem.

View 14 Replies View Related

BSOD Running When Running Intel Driver Update Utility And More Apps

Aug 12, 2012

ive been getting BSODs and finally figured out how to debug it with WinDbg (x86) and set the symbols for windows but i cant read the text. ive tried reinstalling my GPU and Java but no luck. when i try to run intel driver update utility as soon as i run it i get a BSOD ive got the minidump here if anyone knows how to read it, so here you go.

Microsoft (R) Windows Debugger Version 6.2.8400.0 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:UserskalyeDesktop�81212-36504-01.dmp]

[Code].....

View 9 Replies View Related

Windows 7 Won't Let Me Run Chkdsk From Command Prompt

Dec 16, 2009

I ran one of the performance reports today, which claims I have a disk with the dirty bit set. Recommended running chkdsk.Fired up a command prompt and typed chkdsk v: /f/r/x..Access Denied as you do not have sufficient privileges.You have to invoke this utility running in elevated mode.SO, I right-clicked and ran the command prompt as an Administrator. EVEN THOUGH I'M ALREADY AN ADMINISTRATOR.Got exactly the same result. Went into the command properties and SET the thing to "Run as Administrator".UAC is turned OFF.There are days with Windows 7 where I feel like everything is 2 steps forward and 1 step back. How do I make it let me do a simple chkdsk - no I DON'T want to set something to have it run at boot, or go find some 3rd party program to do the same thing. I just want to run chkdsk from this box from a command windows.

View 7 Replies View Related

Create A Batch File For Windows 7 To Run A Command (elevated ) In Command Prompt?

Apr 27, 2011

Trying to create a batch file for Windows 7 to run a command (elevated ) in command prompt?User: is an administrator or in administrator group ( but actual administrator account may be disabled )essentially need to be able to double click the *****.bat filehave it open up cmd in elevated ( run as administrator ) , run the command in the dos window and reboot the computer.

View 2 Replies View Related

Chkdsk In Start-up Repair Versus In Windows Command Prompt

Feb 21, 2012

I recently had a laptop crash (Windows 7 Home Premium x64) during a windows update, had to go through lengthy process which ultimately resulted in need to do system recovery from protected partition on an Acer laptop.

One of the interim steps i had tried was to run chkdsk from a command prompt after having been able to reach "repair your computer". I originally had to create a repair disk to get there, but eventually was able to access it from the computer's hard drive.

Run from the command prompt under start-up repair, the chkdsk was PAINFULLY slow, running for more than 12 hours and without getting through the first step. Granted, it did seem to be trying to fix errors.

I came across something about it being slow based on allocation of system resources in the start-up repair. I wanted to see if anyone could elaborate on that. Now that I've gotten the system recovery working, I'd like to run chkdsk again, and I don't want that to take days. My thought is to run it from an elevated command prompt (run as administrator). I'm also thinking that the /x switch will be needed to run this on the c:drive.

View 6 Replies View Related

"The File Or Directory D:Windows Is Corrupted And Unreadable. Please Run The Chkdsk Utility"

Jun 26, 2011

Up until last friday, my computer worked perfectly fine.Then after i came back from school, i turned on the computer and it went straight to startup repair. I kept receiving messages that said "The file or directory D:Windows is corrupted and unreadable. Please run the chkdsk utility" I let the startup repair work overnight but as i checked today morning, it was STILL going on. I then decided to use the chkdsk /f /r but it did not seem to help. I also tried to install windows again but it kept saying it was corrupted.Currently, i believe that my hard drive is failing(which is sad because i just replaced a failing hard drive about half a year ago that came with this new comp)

View 1 Replies View Related

BitLocker Encryption Failure After Running Startup Repair Utility

Jan 26, 2011

I have an issue which I need resolved. My hard drive had about 5 different partitions, one for Win7 x86, Win7 x64, Misc, Encrypted Data and Virtual Machines. The Encrypted Data partition was secured with BitLocker - The OS-partitions was _not_ secured with BitLocker. Now what happened was that I had to run the startup repair utility on my Win7 x64 installation and this completely messed up things for me. I have lost the Encrypted Data and Virtual Machine-partition.

I do not care about the VMs, but the Data contains vital information which I have not backed up yet. On top of losing the two partitions, a new partition called HP_tools re-appeared. This partition was removed when I scratched the OEM-installation approx. a year ago. I urgently need to recover this Data-partition. I do have unallocated space (between other partitions) on my hard drive, but none at the exact size of my encrypted partition.

View 1 Replies View Related

CHKDSK Not Running - Unspecified Error 766f6c756d652e63 3f1

Jun 25, 2012

I have an unspecified error 766f6c756d652e63 3f1 (yes there is a gap before the 3f1). I have tried but the above error occurs. HDD is C: drive NTFS system. Reason I'm worried is that sfc /scanow returned nothing, but windows backup returned quite a few lines similar to the following....

- Windows Backup skipped C:UsersxxxxxDocuments because is it on corrupted drive C:.
- Windows Backup skipped c:UsersPublicvideos because is it on corrupted drive C:.
- Windows Backup skipped c:UsersxxxxxAppDataLocalLow because is it on corrupted drive C:.

View 6 Replies View Related

BSOD While Running Chkdsk And Scanning HD For Errors

Sep 21, 2012

I have ran western digitals lifeguard tools and they keep giving the error 06-Quick Test on drive 1 did not complete!

"Status code = 07 (Failed read test element), Failure Checkpoint = 97 (Unknown Test) SMART self-test did not complete on drive 1!"

I also get blue screen when I run the extended test, or run a chkdsk. HD tune pro tells me that there are 1461 pending sectors and 1455 uncorrectable errors. Is this bad? 1464 pending sectors on my HD but 0 reallocated.

View 9 Replies View Related

Computer Running Slowly, CHKDSK Automatically Cancels On Startup?

Nov 1, 2011

My laptop has been running extremely slowly lately. It takes longer than usual to load regular programs and any web browser activity takes ages. I have run malware (Malwarebytes) and virus scans (Microsoft Security Essentials) and removed some items. Malwarebytes didn't detect much, but I found a trojan with Security Essentials. However, after removal my problems persist. I have scanned and attempted recovery of bad sectors. Issues were found and fixed, but a disk check was said to be necessary. I tried running chkdsk c: /F, but the disk check cancelled within a fraction of a second on startup.

View 6 Replies View Related

Errors Found, CHKDSK Cannot Continue In Read-only Mode

Aug 21, 2012

Errors found. CHKDSK cannot continue in read-only mode. I ran hard disk check... the result is given below........Errors found. CHKDSK cannot continue in read-only mode.

Windows XP
English (United States)
C: Volume Label: JAYDEEP, File System: NTFS
Volume label is JAYDEEP.
Advanced SystemCare is verifying files (stage 1 of 3)...
144896 file records processed.
File verification completed.

[code]....

View 2 Replies View Related

Boot Into Safe Mode From Command Prompt Possible?

Dec 23, 2011

I cant get windows to boot and it wont restore to another point with a repair disk, but when I put the repair disk in, it gives me an option to open a command prompt window. Is there a command to make the computer boot in safe mode I can enter from the cmd prompt?

View 4 Replies View Related

OpenGL In Safe Mode With Command Prompt?

Sep 1, 2012

I need to know how to enable my accelerated gpu drivers through Command prompt in safe mode. Please don't tell me that there's no such thing, or that Safe mode is for core drivers only... Blah blah blah. I have already enabled my sound card drivers, and Windows installer, so I know it's possible to enable my graphics card with command prompt.The reason I need to do this, is to run certain programs that require OpenGL in Safe Mode. My computer's hard drive is dying, so it doesn't run in normal mode, only Safe mode. I don't plan on replacing this computer too soon, so to have my everyday usage, I need the command.

View 1 Replies View Related

Boot From A Disk To Text Mode With A Command Prompt?

Sep 29, 2010

trouble is, the Repair Disc is useless. All it does is "Load Files", then the hard drive light blinks for what seems like forever, then a mouse cursor on a black screen, and then. well, nothing. I've unplugged everything but the mouse, keyboard and monitor and still nothing. No matter what I do, nothing. Safe mode, recovery, last known good--all do the same thing.The computer boots Ubuntu with no problem, and I can even see the Windows files. (Is that partition supposed to be 'bootable'? It isn't.) Ubuntu tells me there are errors with the $mft whatever that is.

I just don't get it. When I boot from a disc, I expect the machine to boot FROM THE DISC!What is the machine doing for an hour? Every operating system I've ever had could boot from a disk to text mode with a command prompt. All I want to do is fix the mbr or partition table or run chkdsk and see what the problem is. Why won't the repair disk do ANYTHING?I had to replace my motherboard after it burned out, so the discs from the manufacturer are no use. I'll have to buy a new Windows 7 and reinstall

View 8 Replies View Related

Access Host Drive From Command Prompt In Xp Mode

Dec 8, 2009

This might be a silly question, but I'm having a terrible time trying to access files on the host machine (Windows 7) through the command prompt within the Virtual Machine (XP). I can see the drives in Explorer (e.g. C on VAULT_CORE_I&) and I see sclientc in the prompt, but I have no idea how to access the drive from the prompt.

I'm trying to help out a colleague who runs an old FORTRAN compiler and does alot of his engineering calcs with it, and would not work in Windows 7 (but it is working in XP Mode). However, I'd like to keep the files on his Windows 7 machine and not contain them inside the virtual machine.

View 6 Replies View Related

How To Enter In Safe Mode With Command Prompt In Windows 7 In Dell Lappy Without Opening

Feb 1, 2013

i want to open my dell lappy with w7 in safe mode with command prompt f8 dont work.

View 1 Replies View Related

Computer Freezes Unless Running In SAFE Mode?

Mar 11, 2012

I have a Toshiba laptop running Win 7 (64bit). Lately the computer freezes up in less than five minutes if running in normal mode, leaving only hard-boot option. When restarting, I go to "Safe with Networking" mode, and everything seems to run fine, even internet. I have repeatedly run scans from: Malwarebytes; SuperAntiSpyware; SpyBot; Windows Defender; CCleaner; Periform FixCleaner; TDSSKiller, and probably another half dozen. I have reset the Hosts file, and recovered to a reset point established back in December, before the current problems began. Nothing has solved the problem (any threats found in the various scans were removed, but that had no effect on the current problem). I suspect, from the scan results, that the problem is not malware. I think there may be a corrupt or damaged file or process somewhere in the system. The OS is factory installed, and the laptop did not come with a Windows disk. What's the best way to clean this up

View 3 Replies View Related

Running Windows 7 Desktop In Basic Mode?

Sep 8, 2010

I ran into a problem with a friend of mine. She was having problems with her computer trying to run programs when her computer desktop was running in basic mode and not in Aero mode. There was 2 accounts on the computer one in Aero and one in basic. When she logon on to the one in Aero everything ran fine. When she logon on to the one in basic her account. Everything she tried to run didn't work or couldn't change or update.

I ask her if she always ran it in basic and she said she had never change the desktop. As soon as we change it back to Aero than everything was fine. I might be wrong but you should be able to run in the basic mode with no problems right. Does Win 7 change all the programs to run in basic mode and do you have to setup those programs to run right in basic mode. Or is this a commom problem with Win 7.

View 3 Replies View Related

Computer Is Running In A Low Visual Appearance Mode

Apr 3, 2010

Don't know what happened but some things got changed. The transparent mouse selection thingy when you drag your mouse on the desktop is the normal Windows XP/Basic one where it's just the dotted line. Also, the desktop wallpaper slide show doesn't fade into each picture it just does a quick switch. So what I'm thinking is that my computer is running in a low visual appearance mode or something like that. Can I switch it back?

View 7 Replies View Related

Running Network In FULL Duplex Mode

Jan 17, 2013

I m running Windows 7 ultimate x64 on 6 pcs. All connected with cat6 cable to Gigabit Ethernet 8 port switch. Most of the PC have Realtek 8111F, 1 x Gigabit LAN Controller on board (1 or 2 have intel pro giga)

Now question is what settings should i make so that my all pcs can use full available bandwidth/data speed ?

(lan card properties have many settings in advanced tab such as ..packet size,link speed,buffer etc.)

View 5 Replies View Related

Slow Response Running XP Mode Programs

Dec 10, 2009

I am running a legacy program in XP Mode (Adobe Pagemaker 7.0). When I need to save a document, usually to a Windows 7 drive, it takes a very long time to do so - unless I move the mouse pointer within the window. I know this sounds strange but I've confirmed this behavior many times.

I'm guessing that moving the mouse generates an IRQ which temporarily gives the XP mode process higher priority. If it is a large file which takes longer to save, I can observe the save process speed way up when moving the mouse and slow way down when I stop.

Is there some setting somewhere to speed up the process without the mouse movement - my hand is getting tired.

View 2 Replies View Related

Windows 7 With Aero Running In 1920x1080 Mode?

Oct 31, 2011

If you have, I would like to have a screenshot of your desktop with the picture below as a desktop background.My intention is to promote virtualization technology and demonstrate graphically how you can run several operating systems on the same machine at the very same time.Here are the instructions:

1. Make sure that your screen mode truly is 1920x1080, (I don't want to have the wallpaper rescaled in the screen shot). Make the following picture temporarily your desktop wallpaper:

2. Open a window and arrange it as the black rectangle in green in the following picture:

This window could be paint, notepad or any software that opens a standard windows 7 window with Aero translucency. I want this window to look like a typical hardware demanding FPS game (such as Crysis 2 och Battlefield 3 or similar) running in windowed mode in Windows 7.

3. Make sure there are no desktop icons covering the green shaded parts of the image above and make sure that the window you have added is active. Press "SHIFT + PrintScreen" to capture the screen.

4. Open Windows Paint or similar software and paste the screenshot by pressing "CTRL-v".

5. Save the picture as 24-bit PNG, BMP or TIFF (NOT JPEG or any image format below 24-bit!), and submit it as is back onto these forums. You can upload it to e.g. "imageshack.us" but make sure you set the "Do not resize" (!) option.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved