Computer Is Running In A Low Visual Appearance Mode
Apr 3, 2010
Don't know what happened but some things got changed. The transparent mouse selection thingy when you drag your mouse on the desktop is the normal Windows XP/Basic one where it's just the dotted line. Also, the desktop wallpaper slide show doesn't fade into each picture it just does a quick switch. So what I'm thinking is that my computer is running in a low visual appearance mode or something like that. Can I switch it back?
View 7 Replies
ADVERTISEMENT
Mar 11, 2012
I have a Toshiba laptop running Win 7 (64bit). Lately the computer freezes up in less than five minutes if running in normal mode, leaving only hard-boot option. When restarting, I go to "Safe with Networking" mode, and everything seems to run fine, even internet. I have repeatedly run scans from: Malwarebytes; SuperAntiSpyware; SpyBot; Windows Defender; CCleaner; Periform FixCleaner; TDSSKiller, and probably another half dozen. I have reset the Hosts file, and recovered to a reset point established back in December, before the current problems began. Nothing has solved the problem (any threats found in the various scans were removed, but that had no effect on the current problem). I suspect, from the scan results, that the problem is not malware. I think there may be a corrupt or damaged file or process somewhere in the system. The OS is factory installed, and the laptop did not come with a Windows disk. What's the best way to clean this up
View 3 Replies
View Related
Apr 3, 2011
I have a toshiba laptop running windows 7 32bit and made some changes to folder ownership that has wrecked havoc on my machine. I am the only user for this machine and am listed at the administrator. The changes I made were under the "users" folder, and the folder that listed my name. I don't even recall why I was tinkering with it but made a change under file folder properties/security/ownership. Since that change, it has done many things, including removing files and folders from my desktop and computer that do not show up anymore at all. It has blocked me from the c: drive. aApop up upon start up stats microsoft visual runtime library error c:program files. and on and on.
I have done a system restore to prior when I made the changes to no avail. it does the restore, but does not change the folder ownership or issues I am having. I have tried to reset the folder under options to a previous setting but that has not worked and now has me blocked from even going into my c: all together.. saying access denied. I have had no luck under control panel fixing this and have done more harm than good. Is there an easy way to get back control of my computer and regain the files that are not showing up. I have been looking for a way, similar to system restore, to reverse the changes to file ownership and give me control of my computer again. I would think this would be easy since im the system admin but no luck so far.
View 1 Replies
View Related
Sep 8, 2010
I ran into a problem with a friend of mine. She was having problems with her computer trying to run programs when her computer desktop was running in basic mode and not in Aero mode. There was 2 accounts on the computer one in Aero and one in basic. When she logon on to the one in Aero everything ran fine. When she logon on to the one in basic her account. Everything she tried to run didn't work or couldn't change or update.
I ask her if she always ran it in basic and she said she had never change the desktop. As soon as we change it back to Aero than everything was fine. I might be wrong but you should be able to run in the basic mode with no problems right. Does Win 7 change all the programs to run in basic mode and do you have to setup those programs to run right in basic mode. Or is this a commom problem with Win 7.
View 3 Replies
View Related
Jan 17, 2013
I m running Windows 7 ultimate x64 on 6 pcs. All connected with cat6 cable to Gigabit Ethernet 8 port switch. Most of the PC have Realtek 8111F, 1 x Gigabit LAN Controller on board (1 or 2 have intel pro giga)
Now question is what settings should i make so that my all pcs can use full available bandwidth/data speed ?
(lan card properties have many settings in advanced tab such as ..packet size,link speed,buffer etc.)
View 5 Replies
View Related
Dec 10, 2009
I am running a legacy program in XP Mode (Adobe Pagemaker 7.0). When I need to save a document, usually to a Windows 7 drive, it takes a very long time to do so - unless I move the mouse pointer within the window. I know this sounds strange but I've confirmed this behavior many times.
I'm guessing that moving the mouse generates an IRQ which temporarily gives the XP mode process higher priority. If it is a large file which takes longer to save, I can observe the save process speed way up when moving the mouse and slow way down when I stop.
Is there some setting somewhere to speed up the process without the mouse movement - my hand is getting tired.
View 2 Replies
View Related
Oct 31, 2011
If you have, I would like to have a screenshot of your desktop with the picture below as a desktop background.My intention is to promote virtualization technology and demonstrate graphically how you can run several operating systems on the same machine at the very same time.Here are the instructions:
1. Make sure that your screen mode truly is 1920x1080, (I don't want to have the wallpaper rescaled in the screen shot). Make the following picture temporarily your desktop wallpaper:
2. Open a window and arrange it as the black rectangle in green in the following picture:
This window could be paint, notepad or any software that opens a standard windows 7 window with Aero translucency. I want this window to look like a typical hardware demanding FPS game (such as Crysis 2 och Battlefield 3 or similar) running in windowed mode in Windows 7.
3. Make sure there are no desktop icons covering the green shaded parts of the image above and make sure that the window you have added is active. Press "SHIFT + PrintScreen" to capture the screen.
4. Open Windows Paint or similar software and paste the screenshot by pressing "CTRL-v".
5. Save the picture as 24-bit PNG, BMP or TIFF (NOT JPEG or any image format below 24-bit!), and submit it as is back onto these forums. You can upload it to e.g. "imageshack.us" but make sure you set the "Do not resize" (!) option.
View 3 Replies
View Related
Oct 5, 2012
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
View 7 Replies
View Related
May 24, 2012
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
View 2 Replies
View Related
Dec 2, 2011
I have recently moved to Windows 7 (upon getting a new motherboard installed) and 2 weeks later. I cannot start up as I get a 'Restart from Hibernate' message on screen but nothing further happens. I have tried a 'hard restart' from power off several times, allowing plenty of time for capacitor discharge etc but get the same message. More worrying is that I cannot find any way to get the pc to start in safe mode or use restore as Windows 7 seems almost to be bypassing the bios. Holding down delete on startup shows the first line of the bios screen then moves immediately to the hibernate message. It seems to move into that screen before the keyboard or mouse are activated. How I can get out of hibernate?
View 3 Replies
View Related
Feb 14, 2013
I happened to run across this forum while searching for answers to my computer troubles through Google.Here's the issue, my laptop is no more then a year old. It's a Dell Model N5040 running Windows 7 Home Premium, Service Pack 1. For the past week or so my computer has been running increasingly slower, and i cannot for the life of me figure out why.I am only using 36gb of a 446gb hard drive, I have 4gb of ram and have run a virus scan, disk cleanup, and a disk defrag.. It does not run slower while doing certain things infact it seems to selectively slow down. I attempted to complete a disk check of my C drive. This has found a few bad sectors which have been either removed during the check or manually however after a week of attempting to run the disk check I have yet to fully complete a single check. It will freeze at some point on every step and never recover.
I use Trend Micro Titanium as my virus protector and I have even attempted to use their house call software to check if maybe my virus softare was compromised I have used Spybot search and destroy and CCleaner in an attempt to clear up any clutter and/or spy/malware. My only conclusion is that maybe some Windows driver was deleted by mistake through CCleaner. I have attempted to start my computer in safe mode however even this cannot be completed, it freezes and never recovers.Nevertheless, I am at an impass i am unsure on where I go from here and would obviously prefer to fix this myself rather then let some self proclaimed "tech" at a shady I.T. company tell me i need a new computer because they cant figure it out either.
View 1 Replies
View Related
Apr 24, 2011
I have been getting freezes a lot. I have run all the hardware diagnostics and everything checks out ok. I tried to run chkdsk from a c prompt but I get the message "Access denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." This is my home computer and I am the only one using it so I have not set up any user accounts. Why don't I have full privileges?
View 1 Replies
View Related
Aug 26, 2012
Since two days ago I cant access internet anymore. Called the provider, they send a tchnician and he told me that its a new problem in a recent (1 week old) version of windows 7.In normal mode I cant acces but in protected mode I can (without all funcionalities).The technician told me to look for a support.
View 2 Replies
View Related
Jan 5, 2011
At my work we are in the process of upgrading our network from server 2003 and xp on the clients to server 2008 R2 and Windows 7 on the clients. We have some productivity software that will not run on windows 7 64 bit so we have installed the XP mode virtual machine in order to run that software. The software installs fine and runs fine. The problem we are having is some of the software is used to program PLC's and so we need to be able to talk with these devices over the network at their IP addresses. I have configured the "virtual" ethernet adapter and windows 7 ethernet adapter the same. From the cmd prompt in win 7 i can obviously ping the devices and communicate with anything on the network however when I am running the XP mode I cannot access anything on the network. The virtual mode isnt recognizing any of the physical computers resources. Is there a way to make it so when running XP mode and the programs in XP mode the computer can communicate with other devices over the network?
View 3 Replies
View Related
Mar 12, 2012
My dell optiplex 755 runs on windows 7. How do I boot into safe mode?
View 1 Replies
View Related
Nov 20, 2012
I was on the internet this morning and suddenly I lost connection to the internet, I'm connected by ethernet so I tried a different cord and it wouldn't recognize anything, that there was a connection what so ever. So I restored to a previous date assuming the new update, as usual, screwed my laptop up. Same issue happened, but then this time as administrator I cant run chkdsk, tells me access is denied and that I don't have sufficient privileges, even though I am the administrator and only user on the laptop. Also troubleshooting things, anything, it can't continue due to an error, it the details of the error it used to say Restricted but now it says Elevated, like the chkdsk thing as well which mentions that I have to invoke the utility running in elevated mode. My internet after shutting down is back but I'm still confused.
View 9 Replies
View Related
May 7, 2011
when i put my computer into sleep mode, the computer turns off for 5 seconds and turn's on alone.
View 2 Replies
View Related
Dec 15, 2011
Somehow I changed the background in windows and now everything is HUGE. I managed to find a browser to work and that is visually "ok." But everything in my computer is out of reach due to the size of all icons, fonts, etc. How can I get it changed back? I can't even get to system restore to go back to a restore point.
View 1 Replies
View Related
Oct 30, 2012
I am using Lightroom 4 (but I don't think that point is relevant), and somehow, my window has become full screen and I don't even see the 3 boxes in the upper right. How do I get back to the standard appearance? This is not true in any other program. Windows 7 Pro SP1.
View 1 Replies
View Related
Jan 26, 2009
How to Change the Window Color and Appearance in Windows 7 ?
View 0 Replies
View Related
May 20, 2010
How do I change the blue taskbar in Windows 7 to the black taskbar from Windows Vista?
View 2 Replies
View Related
Jul 11, 2011
System Restore - Windows 7 Appearance problems.
View 1 Replies
View Related
Feb 2, 2012
[FONT=verdana, geneva, lucida, 'lucida grande', arial, helvetica, sans-serif]24 Minutes Ago[/FONT][FONT=verdana, geneva, lucida, 'lucida grande', arial, helvetica, sans-serif] #8 (permalink)[/FONT] TWardy Windows 7 ultimate 64 bit 45 postsCan anyone tell me how to colour in trimmings and borders black and then change the font colour. I want everything black with orange writing. I've seen it and I lik it, I just cant figure out to do it
View 1 Replies
View Related
Sep 4, 2010
I have noticed that in the "all programs" portion of start menu that the appearance of the program folders is not uniform. Some of mine are highlighted wtih an orange horizontal band. Does any know why that is. I cannot figure out how to get rid of it.
View 5 Replies
View Related
Apr 12, 2011
I would like to streamline a user account on my Win 7 PC so it maximises performance. This is due to an overheat problem I have been experiancing since my Win 7 upgrade.I have created a new user account that I would like to run an application really smoothly so have taken some performance tweek advice and turned off the aero peak function, and most of the fancy visual apperance settings, set some services to manual and assumed it would only apply these settings for the current user, but it applies the settings to all users registered on the computer.Is it possible to set up two (or more) different accounts so one could have all the default features and visual apperance settings as standard (for email, Web browsing, media centre, gadgets, all that nice stuff), and onther user account be bare bones, no nice graphics and visuals, less defautl services but run high demand programs better?
View 4 Replies
View Related
Apr 6, 2012
I have windows 7 and this is very annoying to have the appearance of the cursor change- then randomly goes back to normal. It takes anywhere from a few seconds to several minutes to change back.
View 11 Replies
View Related
Jul 23, 2012
Like the title says, how can I add fonts to Window Color and appearance? I really want to use that Roboto font used in Android ICS, which I installed but doesn't appear in Window Color and appearance (it appears in Microsoft Word 2010 though)
View 10 Replies
View Related
Jun 29, 2012
if this BSOD is anything for me to be concerned about. OS is Win 7 Pro x64 and the laptop is a HP 8740W. The system is rock solid as far as I know (it's stress-tested very often) and this is the first BSOD I've managed to get out of it. Win 7 was freshly installed around 2 weeks ago on the system and everything was updated. When the BSOD occurred I wasn't really doing anything except changing the Windows Appearance settings.I didn't manage to grab what it said on the BSOD screen except Win32k.sys.
View 1 Replies
View Related
Nov 28, 2011
I have a problem regarding window color and appearance... i want to change the font on my window color and appearance suddenly the resolution of that box is bigger not like before is smaller.. like before i can see how to change font on the menu, web browser and etc. does it possible to change that resolution or adjusting the size of that box or the browser windows?.i want to change the font because it affects on my menu fonts, web browser, and etc.This is the image happens to my window color and appearance.
View 9 Replies
View Related
Mar 11, 2012
When i boot up the Windows Loading screen(STARTING.....with the windows flying towards the sceen)
only the dvi monitor gets it, the other one with hdmi shows not connected.Why ?
View 3 Replies
View Related
May 6, 2012
I am trying to add telephone numbers in contacts and for some reason every time I start a number with +123 it would automatically erase + and leave only the 123 and this form is not valid when trying to make a phone call.
View 2 Replies
View Related
