Windows 7 Computer Shuts Down And Boots Into Startup Repair
Sep 8, 2011
Windows 7 home premium
Dell Studio XPS 1645
I7 1.73 GHZ
6 GB DDR3
500 GB Toshiba
I have had this computer for just over a year and it has ran like a top. I was surfing the internet last night when it just shuts off (no slow down no blue screen) and boots into startup repair. It would not repair, just sat in there forever and would not boot into safe mode or anything. It just kept booting into startup repair for hours.
So I hit esc when it booted to startup repair, I go to the dell backup and restore, save my work documents and pics and let it boot to factory fresh windows install from the dell created partition. Windows reinstalls and loads fine, boots in and begins to update successfully and then reboots back into repair. This happens everytime it reboots. After sometime it will boot into windows fine. If I restart I am back into startup repair for half an hour or more.
My Windows 7 now refuses to boot properly and now only boots into startup repair. This started happening after I shrunk and moved the /dev/sda2 partition (on my computer, the C: drive), so I could install Ubuntu. I did notice that Windows failed to boot but I was stupid and didn't fix as soon as I realized. I installed Ubuntu (and with it, Grub) and now Windows just boots into Startup Repair which just says it can't do anything and then displays some HP software that gives me a few options (none of which has helped). It may be important to note that I have the option to go to the command prompt.
I have tried all the fixes I have found on the internet (such as the various bootrec.exe commands) to no avail and am becoming desperate!
So lately my computer's firewall has decided to not work so I searched around and eventually concluded on doing a upgrade reinstall. As I didn't want to lose any of my files, drivers or programs. All seemed like it went well until the computer rebooted for the last time before it reaches the " Setting up for first use " dialog Though before this was able to happen the computer went into a reboot loop with bsod 0x0000001E
After a large amount of reluctant clicking The computer NOW only boots to the System Recovery Options window and the ONLY option is Startup Repair ; There is NO command prompt no diagnostics, nothing, Just Startup Repair, in which start up repair is unable to do anything and continues to loop itself with a Don't send dialog
I have tried inserting the installation disk and accessing the Repair Computer but it presents an incompatibility error.
I have no F8 menu at all, (no safe mode, which I can't access anyway because the computer can't set up for first use).
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
I use Windows 7 Pro on my Sony VAIO Laptop and I have noticed in the last few weeks that it has became slower and slower so I did the defrag, virus check, disk clean up, windows tweaks and tips un-checked most of the start-up programs and it did make the computer faster except for the boot and shut down and the average time is around 3 minutes for both, so what else can I do before I decide to reformat and set it back to factory settings
When my system is working, it will occasionally just shut off. No BSOD, no error screen of any sort, just a clean power off. It happens anywhere from twice a day to once every two weeks. My system specs are located below.
When my system is not working, I can't even get Windows 7 to load. It boots, I get the option to repair (which, only the first time, will say it reverted back to a time when everything was working fine) or start normally. If I choose to repair, it restarts, then goes into the infinite loop. It restarts, if I choose repair, it says windows cannot fix the problem, and shuts down. If I choose start normally, it shows the windows loading graphics, but then I get the clean shut down right before I get to the log-in screen (don't actually ever see it).
How does it go from the first scenario to the second scenario? Well, I think its Microsoft Office. Every time I try to install it (sometimes successfully), I eventually start to have these start-up problems. But I can't be certain, I just downloaded a fresh install file today to make sure it wasn't my DVD. There are so many more details that may or may not be important, but I'll spare them for the time being.
This is a home-built computer. It should be noted that I've had this problem mostly through the life of this system (15 months), and have replaced the power supply, the RAM, and the SSD that the OS is installed on.
P55A-UD4P Motherboard Intel i7 870 CPU 16GB Kingston 1600 RAM OCZ Agility3 120GB USB 3.0 SSD OCZ Agility2 60GB USB 2.0 SSD (Used for my Star Wars install) Nvidia GeForce GTX 460 1GB Corsair GS700 PSU Windows 7 Home Premium Microsoft Office 2010 Professional
I realize the shut downs sounds like a overheating issue. I wish I could go check the temperatures to let you know what it idles at, but my computer won't turn on. However, I play Star Wars: TOR at max settings and have never had a shut-down happen during that time.
I know this is a shot in the dark, but I don't know enough to narrow the problem down. It honestly makes me want to go buy a pre-built because I feel like the problem is my choice of components or some type of incompatibility.
I have a toshiba laptop that runs windows 7 32bit home premium and it is not booting properly. When I turn it on t will show the microsoft logo and says "starting windows" but never gets past that point. I have tried all the fixes to no avail including, safe mode (will not boot into safe mode..starts to load but stops at drivers/atipcie.sys and sits there for a minute or two and goes to the repair startup recommended screen. I have tried startup repair and done it many times because I have read it can take several times (it says "startup repair cannot repair this computer automatically") I have tried the windows repair disc using system restore but it says no restore points found, even though i know they are on my computer. All of my school files are on this computer and while I have some of there backed up on a external hard drive there are some more recent files that are not. What can I try without a clean install to try and repair this?
I recently got a virus 2 days ago. It disable my possibilities from accessing any program or internet. I made a mistake by downloading a windows something ware to boot up security. It then crash...so I went to task manager didnt work, which i then went to search and entered msconfig. I then chose safe mode in minimal services. It then says loading files. U see a black screen with thite letters of the files being loaded. Then u see ur mouse cursor, and then it boots up again and same process. So I tried launch startup repair, it launches a repair, but it says it startup cannot repair this computer automactically. I then result into going to tapping f8..it goes to the screen of advanced options. Problem is if i try safe mode it will crash. I dont have a backup, and i dont want to lose my movies of over 700 gigs.
I'm having problems with windows starting upon my PC, however, it only occurs intermittently, but seems more frequent now. When booting, the windows spiral begins then stops, and it reboots to the screen to choose startup repair or start windows normally. If I do startup repair, it doesn't find anything to repair, and reboot usually works fine. If I choose Start Windows Normally, 75% of the time if works fine. When the computer runs, it's fine and everything seems to run normally, I don't get blue screens or other issues. I'm not sure where to find any recorded errors to get more specifics.
System: Win 7 professional (upgraded from Home) 64bit Gigabyte GA-H67MA-UD2H-B3 motherboard Intel Core i5-2500 3.3GHz processor 8GB Ram (2x4gb) Seagate 1TB hard drive (system drive) 3TB hard drive (data drive)
my computer keeps going to startup repair. I have tried to start in safe mode, last known configuration,start normally. i have also tried to change the bios and boot from a disc but nothings working so please I need help urgently!
My computer closed down when i started it i got the message start up repair cannot repair this computer automatically. My details are Acer 3812 win 7 no windows start up disc or original windows 7 microsoft disc. Im told best get a new computer as it won't reboot.
Anyway, anytime my Sony Vaio computer isn't shut down properly, or the screen times out due to inactivity, it will show a screen that says "windows is loading files" and then proceeds to do a start up repair in which it will try to restore my device to a previous setting (or something like that). When i first got this computer, as with my previous HP, I could close the lid..no harm no foul. After having this one for a month it started doing this out of nowhere.
When I start up my computer, It shows the DELL logo. Then, it shows a grey bar that spans the screen saying "Windows is loading files..." Next a green bar that says: "Microsoft Corporation" Startup repair automatically starts. It runs for a little while and then it says:
"Startup Repair cannot repair cannot repair this computer automatically ->Send information about this problem (recommended) ->Dont Send [V] View problem details"
The problem details are:
"Problem signature: Problem Event Name: StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown Problem Signature 04: 21200906 Problem Signature 05: AutoFailover Problem Signature 06: 14 Problem Signature 07: CorruptFile OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033"
If I click advanced View advanced options for system recovery and support, I get a list of things to do.System Restore and System Image Recovery have no restore points. The Windows Memory Diagnostic comes up with nothing. I do have access to the Command Prompt.
I'm not sure if this is the right place to post this, but recently on my girlfriends computer we installed a webcam and everything kinda froze. Upon restarting the computer it comes up with the screen saying a device failed and may need a startup repair. Also gives the option to start windows normally. The problem is the keyboard is not recognized to choose an option. It counts down and goes to the screen to start the startup repair, but again no mouse or keyboard. I have tried accessing the BIOS but considering the keyboard is not working i cannot do that either. I'm not sure what all is in it as I got it from a friend when he built a new one. It is a custom computer, not from a typical manufacturer. It has worked perfectly up until trying to install the webcam. I have tried using every USB port and also tried using a ps/2 converter to no avail. I'm not sure what to do anymore, and I'm afraid of messing with it too much or hard-booting it too much.
Okay, so I woke up my computer from sleep mode yesterday, and it worked perfectly fine for all of five minutes before everything except my cursor froze. I waited for it to unfreeze or give me a "not responding" message for about twenty minutes, but when it didn't, I manually shut it down by pressing the power button, since I couldn't get to the start menu. But when I turned it back on, an error message appeared. I don't remember exactly what it said, but it gave me the option to either: "Launch startup repair (reccomended)" or "Start Windows normally". So I chose to launch the startup repair since it said that it would fix anything that had caused my computer to stop working, but it's been "searching for problems" for about five hours now! The blue bar just keeps scrolling past, but other than that, nothing's happening. Does anyone know how to fix this? Or should I call someone to check it out? Will I lose my files? I tried to "Start Windows normally" as well, but nothing happened at all... Oh, and it's an Acer laptop with Windows 7 on it
every time i turn on my laptop, a startup repair window pops up and then when it's done solving the problems it shuts down. when i try opening it again the startup window appears.
Recently my desktop has started having issues. I purchased it new in january and within this last month when I start it, it gets stuck in the startup screen. When I try to do startup repair it always is unsuccessful. When I view the details it lists this "problem signature 07: Bad patch" I have tried doing a system restore to every point it lists and it says "the instruction at 0xfba8ca53 referenced memory at 0x06e2f90f. The memory could not be read. Click ok to terminate". When I try to enter safe mode it doesn't work either.
Today, my HP pavilion dv7 laptop thats running on Windows 7 64 bit will not start. It was acting a little slow and then it completely froze and shut down. When i turned it on again it when to the starting windows screen and the windows logo never came and it went right into a startup repair.
Basically the issue is that my computer won't boot. I have had it for just over a year and have never had any issues with it. It's protected and isn't used for anything dodgy, my brother uses it for SWTOR and I use it mostly for uni work and a bit of gaming here and there. Anyway out of nowhere it failed to start. Its done this once before and last time I just told it start Windows normally and everything was fine. This time not so much.
It loads up Startup Repair even if I select start Windows normally as it fails to do so and restarts itself automatically. I left it to detect errors but when I checked it a few hours later it still said searching so I cancelled and left it. I tried again yesterday and have left it on for approximately 25 hours to no avail, it still says searching! I have a lot of stuff I haven't backed up so I want to save it. Also note that there are no pieces of hardware plugged into the machine at all, only the mouse, keyboard and monitor.
Basic Info :- Acer Windows 7 x64 8 GB Ram 500GB HDD NVIDIA G Force 950
yesterday i was watching a show on my computer (sony vaio) and it kept freezing and lagging and wouldn't restart so i manually restarted it. when i tried to turn it on it would say "starting up windows" but it would take to long and it would restart again with error repair. when i would load error repair it would say it's loading files but only a background screen would show and no files.
