Windows 7 Boots Into Startup Repair After Moving Partition
Aug 28, 2012
My Windows 7 now refuses to boot properly and now only boots into startup repair. This started happening after I shrunk and moved the /dev/sda2 partition (on my computer, the C: drive), so I could install Ubuntu. I did notice that Windows failed to boot but I was stupid and didn't fix as soon as I realized. I installed Ubuntu (and with it, Grub) and now Windows just boots into Startup Repair which just says it can't do anything and then displays some HP software that gives me a few options (none of which has helped). It may be important to note that I have the option to go to the command prompt.
I have tried all the fixes I have found on the internet (such as the various bootrec.exe commands) to no avail and am becoming desperate!
View 7 Replies
ADVERTISEMENT
Oct 17, 2012
Windows will only boot into startup repair no matter what. The issue is startup repair was unable to fix the problem. [code]
View 3 Replies
View Related
Sep 8, 2011
Windows 7 home premium
Dell Studio XPS 1645
I7 1.73 GHZ
6 GB DDR3
500 GB Toshiba
I have had this computer for just over a year and it has ran like a top. I was surfing the internet last night when it just shuts off (no slow down no blue screen) and boots into startup repair. It would not repair, just sat in there forever and would not boot into safe mode or anything. It just kept booting into startup repair for hours.
So I hit esc when it booted to startup repair, I go to the dell backup and restore, save my work documents and pics and let it boot to factory fresh windows install from the dell created partition. Windows reinstalls and loads fine, boots in and begins to update successfully and then reboots back into repair. This happens everytime it reboots. After sometime it will boot into windows fine. If I restart I am back into startup repair for half an hour or more.
View 8 Replies
View Related
Jan 4, 2013
So lately my computer's firewall has decided to not work so I searched around and eventually concluded on doing a upgrade reinstall. As I didn't want to lose any of my files, drivers or programs. All seemed like it went well until the computer rebooted for the last time before it reaches the " Setting up for first use " dialog Though before this was able to happen the computer went into a reboot loop with bsod 0x0000001E
After a large amount of reluctant clicking The computer NOW only boots to the System Recovery Options window and the ONLY option is Startup Repair ; There is NO command prompt no diagnostics, nothing, Just Startup Repair, in which start up repair is unable to do anything and continues to loop itself with a Don't send dialog
I have tried inserting the installation disk and accessing the Repair Computer but it presents an incompatibility error.
I have no F8 menu at all, (no safe mode, which I can't access anyway because the computer can't set up for first use).
View 1 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Jun 29, 2012
I have had a strange problem.Windows 7 only boots up every other boot. In between the computer hangs at the Advent screen.I have been into MSconfig and in start up disabled all and in Services, again disabled all and hidden Microsoft.It now starts up ok but will I have caused other issues by disabling all and hiding Microsoft?
View 8 Replies
View Related
May 11, 2011
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies
View Related
Jan 14, 2011
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies
View Related
Feb 18, 2012
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
View 1 Replies
View Related
Nov 3, 2009
My boot menu originally consists of Vista (C:) and recovery partition (D:). To install Windows 7, I shrank C and made a separate partition (W:)
Now I have 3 partitions: Vista (C:), New Simple Volume (W:), Recovery (D:).
I installed Windows 7 to the (W:), and it reboots a few times during installation. My situation goes as follows:
Initial installation---Reboot (1 of 3)---bypasses the boot menu and continues installation---Reboot (2 of 3)---boot menu shows up and I can choose to continue the installation of Windows 7, or go to Vista. When I choose Windows 7, it finishes installation---Reboot (3 of 3)---No boot menu is shown. Computer boots into recovery partition.
Why is this happening? Repairing Windows 7 or Vista using recovery partition doesn't help either. It basically just forms a loop by booting to the recovery every time.
Interestingly, the only way I can start Vista again is by reinstalling Windows 7 and wait until the boot menu screen show up after the reboot (2 of 3).
View 9 Replies
View Related
Oct 5, 2012
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies
View Related
Mar 24, 2012
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies
View Related
Jul 31, 2010
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies
View Related
Mar 10, 2011
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies
View Related
Jul 24, 2012
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies
View Related
Jan 17, 2012
I currently have a WD 120GB drive that i installed my win 7 on, but this drive is old and very slow.I have a brand new 1.5 TB drive and i was wondering if there is an easy way to move the win 7 installation to that new drive without much hassle.
View 6 Replies
View Related
Feb 3, 2012
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies
View Related
Aug 17, 2010
I hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky.
I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
View 9 Replies
View Related
Oct 4, 2011
I want to move my OS (Windows 7 Pro) to the new partition that I created for it but I am not sure how I would go about it. Can I just copy/paste or is there another way?
P.S. This is off-subject but I was only after thinking of it. My wireless adapter is a fair bit away from my router and it seems to have trouble connecting to the router whenever the two other laptops are connected to it. I would think that this is due to interference because all of the computers are on the same channel, is there any way to change the channel and would this be of benefit to me?
View 14 Replies
View Related
Aug 13, 2009
I have Windows 7 RTM installed.
I am trying to move my Win 7 partition to a different partition.
I have made an exact hard drive replica, using Acronis True Image.
The only problem I'm facing is that when I installed Windows 7, it also made a "System reserved" partition, which I think contains the boot files.
What I want to know is:
How do I restore my exact hard drive replica on my new partition, and let the computer boot up successfully to my new partition?
View 4 Replies
View Related
Oct 26, 2010
I have a new PC (HP) that came with an OEM version of Win 7/64, I also purchased an SSD that I had planned to use for a boot disk with all libraries on a second 1TB HDD.
I successfully installed Win 7 on the SSD and was happy for a bit, until I discovered some instabilities. Long story short, HP does not release the drivers for their in-house products and I could not stabilize the system, so I moved the SSD to Drive D and re-installed from the factory image. All the drivers I need are there and system is 100% stable.
is there a way to move the System partition over to the SSD so I get the 10 second boot that was so nice?
View 1 Replies
View Related
May 18, 2011
Whilst looking for a keygen for Microsoft Office 2010, I must have got a bad file.. yay. When I clicked on the app, my computer immediately went to the Startup Repair window and has been relentless. I've tried opening in SafeMode thru F8 for a system restore, no good. And attempted to start windows normally through F12.
Finally, the Startup mode is over and I'm attempting to turn it back on ... and we're right back into Startup Repair.
View 1 Replies
View Related
Jul 30, 2012
the Startup screen. So I went to the Startup repair tool as was recommended, but after few tries nothing has changed. So I tried to recover to previous recovery point, but also nothing. Then I tried booting to Safe mode, and I saw that during the loading process there was no file shown as succesfully loaded. I might also know what could be the cause of this problem, because yesterday when I was shutting Win down, there was a blackout so obviusly some files are corrupted.
View 3 Replies
View Related
Dec 2, 2011
yesterday I ordered a Crucial M4 128 Solid State Drive. I want to use it in my laptop as a bootdisk for my Windows (my laptop has 2 hard drive slots). My old hard drive came with an Acer recovery partition. My question is simple (I hope the solution is also simple): how do I move the recovery partition from my old hard drive to the Solid State Drive? All the necessary drivers are on the recovery partition, which is the main reason I want to have it on my SSD.
EDIT: will I lose the functionality of restoring my laptop when pressing ALT+F10 on boot?
View 6 Replies
View Related
Nov 7, 2011
In an attempt to move my paging file from my C: Partition , due to my unfamiliararity with the process , I've now got this file on both my C: drive and the new desired Partiton.Is it OK now to simply delete this file from the C: Partition , thus leaving me with only one paging file on this other Partition ?My reason for using this process is an attempt to reduce the size of an Image File of my C: Partition .
View 9 Replies
View Related
Jan 2, 2010
I am using Windows 7 Home Premium N and XP Home on a dual-boot system but I want to move my Windows 7 partition from one drive to another but am not sure how to do it. Currently XP is on partition C: and Windows 7 on partition O: and essentially, what I want to do is to move partition O: to my main drive where space is already available for this to be done.
I have seven drives on my system amounting to 6.5Tb (2Tb on external drives) and currently Windows 7 is on a partition on one of the internal 1Tb drives. However, I would like to free up the space being used and place Windows 7 in a separate 50Gb partition at the end of my main drive (500Gb). Since I pre-partitioned the current Windows 7 partition before installation, I do not have the 'hidden' partition I've read so much about.
I have an old DOS version of Ghost on a boot CD and can readily back up the current Windows 7 partition ready for recovering to the prepared partition on my main drive. Once transferred I then want to delete the current Windows 7 partition. However, I know there is more to it than this! I am quite happy to reletter the partition to drive O: since I have software installed on the Windows 7 partition which is referred to in the registry.
All this I'm fairly confident about doing - but it is operations involving the boot manager that I am completely unsure of. How does the system know where the boot info is located? What points it to the right partition/drive? Does it refer to the drive and/or partition? Is there anything else I just may have overlooked? Finally, should I perhaps just leave it where it is until I'm ready to do a reinstall on the appropriate partition?
A lot of questions I'm afraid but I would appreciate some help as I'm fairly new to the question of dual-boot systems and boot management.
PS I have been looking for info on this in all sorts of places but have not so far found the answers to my questions. Sorry for any inconvenience if the info I'm looking for is already on this, or another, site. It's just that I've not found the info so far and any help being pointed in the right direction would be appreciated.
View 9 Replies
View Related
Jan 4, 2012
Is it a good idea to create a 10GB partition and use it solely to place page file?And then disable pagefile and use Eraser to securely free wipe the partition? Would this get rid of the contents inside pagefile for good? And does the speed and performance be affected if pagefile is in another partition?
View 4 Replies
View Related
Aug 13, 2011
Usually I can resolve most issues myself but this one appears to have stumped me so I am graciously turning to you in my time of need.I am unable to boot Windows 7 on my Acer Ferrari One F0200 netbook. It has Windows 7 home premium 64-bit installed but due to an unknown problem or possibly persistent virus I have been unable to boot into windows.
below is a list of things i've tried up til now:
Tried to boot in all safe mode options (failed)
Tried to boot from last known good configuration(failed)
Tried to system restore from all available restore points (failed)
Tried multiple Startup Repairs(all failed)
"Startup Repair cannot repair this computer automatically"
Problem signature:
Problem event name: StartupRepairOffline
Problem signature 01 : 6.1.7600.16385
Problem signature 02 : 6.1.7600.16385
Problem signature 03 : unknown
[code]....
while writing this I managed to get a blue screen message(disabled the option to automatically restart on system failure) which had been flashing for a nano second previously.A problem has been detected and Windows has been shut down to prevent damage to your computer. it says to check for viruses on your computer remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run chkdsk /f to check for hard drive corruption, and then restart your computer.I had already ran the chkdsk /f before I saw this message and no files were corrupted/no bad sectors. So this is where I'm at, at my wits end hoping that I dont lose all my data.
View 3 Replies
View Related
Jun 4, 2012
I've been having trouble trying to get my computer to boot; I'd noticed a drop in performance (still unsure why) so decided to boot up in safe mode and poke around - it was not my original intention to install AC 5.3.0 but somehow it happened. I ran the 'deep-care' utility and everything was working fine, my computer rebooted and performed a disk check: there weren't any errors that I can remember apart from [something along the lines of] 60 reparse files. Following this my computer restarted and Windows failed to load, restarting to show me startup repair - this isn't the first time this has happened, a similar thing occurred following previous attempts at boosting speed, though before I was able to get Windows up and running using an Ubuntu installation disk... still don't understand why - no need to say that it didn't work this time. Startup repair refuses to work and my system restore points have vanished; I would try doing a repair install if I had a copy of the disk. I built the computer myself a few months back, borrowing a Windows 7 installation disk from a friend (who has now conveniently lost said disk), startup repair does tell me something about 'Problem Signatures'. [code]
View 2 Replies
View Related
Feb 22, 2012
I am having a problem with windows 7, when i start the computer it says loading files and then goes directly to startup repair. I cant even get into the computer in safe mode or anything else by pressing f8 when istartup. It just keeps on this startup repair loop.Its states startup repair checking for problems, it attempts repairs but then it says it cant repair this computer automatically. I have tried system restore, sytem image recovery and tried to restore the computer to its factory state. when i try that i get a error 0x4001001300001002. I didnt get any recovery disks when i bought the computer either.
View 12 Replies
View Related
Mar 15, 2012
I have a Sony Viao with Win 7 Home Premium and I just deleted some form of Trojan with MS Security Essentials and then I ran windows updates before I restarted the machine. Windows update installed some security updates along with Service pack 1 and IE9. Now the computer will not load Windows. It goes straight to the startup repair but cannot fix the problem. There is not restore points other that when SP1 was installed and I gives an error every time I try to restore it. I can get to a command prompt and I have tried to run sfc /scannow but it tells me there is a system repair pending which requires a reboot and then does nothing. I also tried check disk(just as a last chance) but that didn't do anything.
View 2 Replies
View Related
