Moving System Partition To SSD?
Oct 26, 2010
I have a new PC (HP) that came with an OEM version of Win 7/64, I also purchased an SSD that I had planned to use for a boot disk with all libraries on a second 1TB HDD.
I successfully installed Win 7 on the SSD and was happy for a bit, until I discovered some instabilities. Long story short, HP does not release the drivers for their in-house products and I could not stabilize the system, so I moved the SSD to Drive D and re-installed from the factory image. All the drivers I need are there and system is 100% stable.
is there a way to move the System partition over to the SSD so I get the 10 second boot that was so nice?
View 1 Replies
ADVERTISEMENT
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies
View Related
Aug 13, 2012
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
View 4 Replies
View Related
Oct 4, 2011
I want to move my OS (Windows 7 Pro) to the new partition that I created for it but I am not sure how I would go about it. Can I just copy/paste or is there another way?
P.S. This is off-subject but I was only after thinking of it. My wireless adapter is a fair bit away from my router and it seems to have trouble connecting to the router whenever the two other laptops are connected to it. I would think that this is due to interference because all of the computers are on the same channel, is there any way to change the channel and would this be of benefit to me?
View 14 Replies
View Related
Aug 13, 2009
I have Windows 7 RTM installed.
I am trying to move my Win 7 partition to a different partition.
I have made an exact hard drive replica, using Acronis True Image.
The only problem I'm facing is that when I installed Windows 7, it also made a "System reserved" partition, which I think contains the boot files.
What I want to know is:
How do I restore my exact hard drive replica on my new partition, and let the computer boot up successfully to my new partition?
View 4 Replies
View Related
Jan 17, 2012
I currently have a WD 120GB drive that i installed my win 7 on, but this drive is old and very slow.I have a brand new 1.5 TB drive and i was wondering if there is an easy way to move the win 7 installation to that new drive without much hassle.
View 6 Replies
View Related
Dec 2, 2011
yesterday I ordered a Crucial M4 128 Solid State Drive. I want to use it in my laptop as a bootdisk for my Windows (my laptop has 2 hard drive slots). My old hard drive came with an Acer recovery partition. My question is simple (I hope the solution is also simple): how do I move the recovery partition from my old hard drive to the Solid State Drive? All the necessary drivers are on the recovery partition, which is the main reason I want to have it on my SSD.
EDIT: will I lose the functionality of restoring my laptop when pressing ALT+F10 on boot?
View 6 Replies
View Related
Nov 7, 2011
In an attempt to move my paging file from my C: Partition , due to my unfamiliararity with the process , I've now got this file on both my C: drive and the new desired Partiton.Is it OK now to simply delete this file from the C: Partition , thus leaving me with only one paging file on this other Partition ?My reason for using this process is an attempt to reduce the size of an Image File of my C: Partition .
View 9 Replies
View Related
Jan 2, 2010
I am using Windows 7 Home Premium N and XP Home on a dual-boot system but I want to move my Windows 7 partition from one drive to another but am not sure how to do it. Currently XP is on partition C: and Windows 7 on partition O: and essentially, what I want to do is to move partition O: to my main drive where space is already available for this to be done.
I have seven drives on my system amounting to 6.5Tb (2Tb on external drives) and currently Windows 7 is on a partition on one of the internal 1Tb drives. However, I would like to free up the space being used and place Windows 7 in a separate 50Gb partition at the end of my main drive (500Gb). Since I pre-partitioned the current Windows 7 partition before installation, I do not have the 'hidden' partition I've read so much about.
I have an old DOS version of Ghost on a boot CD and can readily back up the current Windows 7 partition ready for recovering to the prepared partition on my main drive. Once transferred I then want to delete the current Windows 7 partition. However, I know there is more to it than this! I am quite happy to reletter the partition to drive O: since I have software installed on the Windows 7 partition which is referred to in the registry.
All this I'm fairly confident about doing - but it is operations involving the boot manager that I am completely unsure of. How does the system know where the boot info is located? What points it to the right partition/drive? Does it refer to the drive and/or partition? Is there anything else I just may have overlooked? Finally, should I perhaps just leave it where it is until I'm ready to do a reinstall on the appropriate partition?
A lot of questions I'm afraid but I would appreciate some help as I'm fairly new to the question of dual-boot systems and boot management.
PS I have been looking for info on this in all sorts of places but have not so far found the answers to my questions. Sorry for any inconvenience if the info I'm looking for is already on this, or another, site. It's just that I've not found the info so far and any help being pointed in the right direction would be appreciated.
View 9 Replies
View Related
Jan 4, 2012
Is it a good idea to create a 10GB partition and use it solely to place page file?And then disable pagefile and use Eraser to securely free wipe the partition? Would this get rid of the contents inside pagefile for good? And does the speed and performance be affected if pagefile is in another partition?
View 4 Replies
View Related
Jul 20, 2012
I wish to partition my rebuilt PC into C: (OS only), D: (games and utilities), and E: (data) drives, my intention being to make future upgrades or OS reinstalls easier. (The machine currently only has one HDD.)Therefore I want to move C:users to the E: partition. I've already searched for ways to do this and there are seemingly three ways of going about it:1. Change the value in My Documents->Properties->Location tab as described here: Move Your Data to a Safer, Separate Partition in Windows 7 | PCWorld3. Leaving C:users where it is and using a symbolic link to E:users as described here: Move the Users Directory in Windows 7Is there a consensus on the 'best' method for doing this? If not, what are the advantages and disadvantages of each of the above methods?
View 3 Replies
View Related
Dec 16, 2010
I want to move My Documents folder to another partition (D:) but I'm wondering if I do will other users on the computer now be able to access the contents?
View 9 Replies
View Related
Jan 1, 2010
I have a partition on my hard drive and i would like to move my user files e.g. My Documents, pictures, videos etc.
I was wondering can i just drag the folder "Users" to the partition.
So basically I would like to know how i get the "Users" folder over to another partition.
View 9 Replies
View Related
Sep 25, 2009
So heres my problem: I installed Win 7 on a drive a while back and earlier today I decided that I needed more hard drive space. I saw that I had 100gb of unallocated space on the drive, but it was behind my Windows 7 partition, making it impossible to resize that partition. So I defragged with Perfect Disk 10 which moves all the files to the back of the partition, cleaned up, disabled all the usual things, ran defragger again, and then booted into a live cd of GParted. I then proceeded to move my Windows 7 partition behind the unallocated space so I could extend the volume.
Unfortunately, something went wrong and now I get the error message "Disk boot failure, please instert system disk and hit enter." So I followed the directions and ran startup repair, tried manually creating the bootmgr, and ran all the tests, but it still doesn't work. Luckily for me, I was able to reinstall Windows 7 on the unallocated space so I can at least get to the files on my other drive, which I discovered are all perfectly fine. I'm hoping this will be a quick fix since it seems like all the files are ok. What should I do so that I can boot back into that partition?
Long story short, I tried moving the partition, and something went wrong, and now I can't boot into that drive. I installed another copy of Win 7 on another partition and all the files are ok. What do I need to do to the original partition to get it to boot again?
View 9 Replies
View Related
Aug 22, 2012
I just made my partition with 14GB memory only. I have always an error that my partition is already full, but my folder I backupped is just 9GB.I want to ask if it is okay to cut and paste to my folder (pictures) to my new partition.
View 6 Replies
View Related
Jun 7, 2012
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies
View Related
Dec 24, 2011
So, I have a disk with Windows 7 installed on the 3rd partition of that disk. I want to move that installation to the first partition of the disk.Repartitioning and boot settings aside, is there a way to do that? (besides using sysprep)Last time I tried that, windows would load slowly and after ''Preparing your desktop'' screen it would just show the one-color desktop, no icons, no explorer shell loaded.Alt,Ctrl,delete works, for running ''explorer'' from task manager, but computer, control panel or anything system-related does not open, instead it pops up an error window with, (e.x.)''{ED7BA470-8E54-465E-825C-99712043E01C}'' not found.
View 6 Replies
View Related
Aug 28, 2012
My Windows 7 now refuses to boot properly and now only boots into startup repair. This started happening after I shrunk and moved the /dev/sda2 partition (on my computer, the C: drive), so I could install Ubuntu. I did notice that Windows failed to boot but I was stupid and didn't fix as soon as I realized. I installed Ubuntu (and with it, Grub) and now Windows just boots into Startup Repair which just says it can't do anything and then displays some HP software that gives me a few options (none of which has helped). It may be important to note that I have the option to go to the command prompt.
I have tried all the fixes I have found on the internet (such as the various bootrec.exe commands) to no avail and am becoming desperate!
View 7 Replies
View Related
Jun 28, 2012
Through a series of shenanigans involving experiments with mirroring on Windows 7 64 bit using Disk Management, and then subsequently removing the mirror after having recurring errors/problems with the synching, My 100MB System Reserve partition has ended up on a separate partition than my system image. For instance: Disk 1 System C: Healthy (Boot, page...) Disk 0 Healthy (System Reserved...).
In addition, the System Reserved partition has been assigned a drive letter "G:" or "E:" and is now visible in explorer and it won't allow me to remove it and supress from explorer view.
I'd like to
1) move/create the System Reserve partition to Disk 1 (with System C: drive)
2) remove the System Reserve partition from Disk 0 to free it all up as a data drive
Do I use command below to create a System Reserve on Disk 1? bcdboot C:Windows How do I then delete the System Reserve partition on Disk 0. Also a byproduct of all of this, when I reboot now, I have a "Windows 7" option and a "Windows 7 Secondary Plex" option. The "Windows 7" option no longer boots (it's stops while the logo panes are flying in circles to form the logo and goes into a fix loop that never fixes it). I have a feeling it's looking for the old mirrored hardware configuration or something. However, "Window 7 Secondary Plex" option does boot just fine. Do I use MSCONFIG to remove the "Windows 7" boot entry so I don't get this annoying option at boot?
View 9 Replies
View Related
Dec 18, 2012
I have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
View 5 Replies
View Related
Nov 24, 2011
My system CPU fan remains at high speed and the system won't enter BIOS. I got a duplicate HP system and tried to move my Windows 7 HD from the older system to the new one without any luck. Apparantly Windows 7 is protected with some sort of hardware hash. I can't use repair or restore.How can I get my Windows 7 HD to work in this new system? Everything is legit regarding my software keys, etc.
View 2 Replies
View Related
May 28, 2010
is it possible to move my Windows 7 system HDD from old PC (which is dying) to new PC, which has better processor, RAM etc?I am thinking that if I uninstalled all hardware before shutting down the system, then putting the drive into new PC it might work.
View 9 Replies
View Related
Dec 9, 2010
I have a laptop and I partitioned "C" into "C" and "F". Now I want to move the non-system, non Windows OS files to "F". I need to know which of the folders now on "C" I can move. I've attached a screencap. Which of the folders can I move?I guess I should not moveProgram FilesProgram Files (x86)ProgramDataTemptmpWindowsWindows.oldwinpe_x86Link to Screencap: IMG]http://s1.**************/1p0c1hi10/C_Disk_Folders_2010_12_09_v02.jpg[/IMG]
View 3 Replies
View Related
May 27, 2012
I'm in a bit of a predicament. I have a operation of servers which are all the same model (HP DL140) The units don't have an optical drive, so a CD installation is not one of the options. I fiddled around with the bios to attempt installing from USB, but I didn't have any success at that either. The bios of these units are very fickle and very uninformative. I'd prefer to simply access the boot menu and select the USB, but I haven't a clue which key brings up the boot menu. So, I tried my hand at a different method. I took the harddrive of a server with a working OS and popped it into a server which did not have an OS. To my surprise, it booted normally. So this brings the question: Maybe I can just copy over the files of a working server onto the harddrive of another? I'd imagine since the files transferred over are literally the same, there shouldn't be any problem.
View 9 Replies
View Related
Jul 24, 2011
I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
View 1 Replies
View Related
Apr 10, 2012
I currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies
View Related
Oct 22, 2009
I have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies
View Related
Dec 16, 2012
My system disk is about 80% filled up and I am looking to move the system files to a new disk for increased efficiency. I believe the way to go is diskcopy, creating a clone of current system disk to a new disk.smI am looking at EaseUS Disk Copy Home Edition 2.3.1 and MiniTool Drive Copy both freeware.
View 4 Replies
View Related
May 18, 2011
So i would like to buy a whole new computer. but i want to keep the operating system which is windows 7 professional. It's installed on the hard drives as raid 5. now i know that the raid key or whatever it's called is stored int he bios so just plugging the hard drives into a motherboard that supports raid 5 won't work. So what can i do to install everything that i have on these hard drives into a new system? Also the operating system is registered online would i be able to re register it or something? i don't have the new computer yet i'm just looking around for something good and for a good deal.
View 12 Replies
View Related
Mar 24, 2012
I had Dell XPS 8300 Desktop & had bought & Installed Windows-7 ( Ultimate ) on it's 500 GB HDD.I gave that system to my relative except Hard Drive.Now I bought Dell T-7500 Workstation with only DOS installed on it's hard drive to save some money & because I already have Windows-7 ( Ultimate ) DVD.I took out the hard drive with DOS from the workstation & replaced it with the hard drive that I had in XPS with Win-7 already installed.I then tried to boot it in the workstation but it wouldn't boot & gave error messages.So I formatted the OS Partition & fresh installed Windows-7. Now it does load Windows -7 but first it goes thru some other commands as follows when I start the system.
Dell SAS 6 Host Bus Adapter BIOS
MPTBIOS 6.22.03.00 ( 2008.08.06 )
Initializing.....
Press Ctrl - C to run SAS Configuration Utility
Searching for Devices at HBA 0.....
Dell MPT Boot ROM Successfully installed
Then it loads Windows-7.All of above happens on its own, I didnt touch anything.So what is going on & what do I have to do get rid off those initializing commands ? I have never had this happen to any previously owned Dell systems.Also I haven't installed any drivers yet but Sound, Video & Internet does work.Do I need to install any drivers & if yes, which ones ?Here is the configuration of Dell workstation T-7500 :
Intel(R) Xeon(R) E5645 2.40GHz, 12M cache, 5.86 GT/s QPI, Turbo, HT, 6C
Intel(R) 5520 Chipset
DOS Factory Installed (English)
Integrated Intel(R) SATA 3.0Gb/s controller with support for RAID
Integrated High Definition Audio
[code]....
View 8 Replies
View Related
Jan 6, 2013
I want to install a new hard drive on my laptop. How can I keep the windows 7 operating system that is now installed on the current hard drive?
View 2 Replies
View Related
