I currently have a WD 120GB drive that i installed my win 7 on, but this drive is old and very slow.I have a brand new 1.5 TB drive and i was wondering if there is an easy way to move the win 7 installation to that new drive without much hassle.
View 6 Replies
I am using Windows 7 Home Premium N and XP Home on a dual-boot system but I want to move my Windows 7 partition from one drive to another but am not sure how to do it. Currently XP is on partition C: and Windows 7 on partition O: and essentially, what I want to do is to move partition O: to my main drive where space is already available for this to be done.
I have seven drives on my system amounting to 6.5Tb (2Tb on external drives) and currently Windows 7 is on a partition on one of the internal 1Tb drives. However, I would like to free up the space being used and place Windows 7 in a separate 50Gb partition at the end of my main drive (500Gb). Since I pre-partitioned the current Windows 7 partition before installation, I do not have the 'hidden' partition I've read so much about.
I have an old DOS version of Ghost on a boot CD and can readily back up the current Windows 7 partition ready for recovering to the prepared partition on my main drive. Once transferred I then want to delete the current Windows 7 partition. However, I know there is more to it than this! I am quite happy to reletter the partition to drive O: since I have software installed on the Windows 7 partition which is referred to in the registry.
All this I'm fairly confident about doing - but it is operations involving the boot manager that I am completely unsure of. How does the system know where the boot info is located? What points it to the right partition/drive? Does it refer to the drive and/or partition? Is there anything else I just may have overlooked? Finally, should I perhaps just leave it where it is until I'm ready to do a reinstall on the appropriate partition?
A lot of questions I'm afraid but I would appreciate some help as I'm fairly new to the question of dual-boot systems and boot management.
PS I have been looking for info on this in all sorts of places but have not so far found the answers to my questions. Sorry for any inconvenience if the info I'm looking for is already on this, or another, site. It's just that I've not found the info so far and any help being pointed in the right direction would be appreciated.
My Windows 7 now refuses to boot properly and now only boots into startup repair. This started happening after I shrunk and moved the /dev/sda2 partition (on my computer, the C: drive), so I could install Ubuntu. I did notice that Windows failed to boot but I was stupid and didn't fix as soon as I realized. I installed Ubuntu (and with it, Grub) and now Windows just boots into Startup Repair which just says it can't do anything and then displays some HP software that gives me a few options (none of which has helped). It may be important to note that I have the option to go to the command prompt.
I have tried all the fixes I have found on the internet (such as the various bootrec.exe commands) to no avail and am becoming desperate!
I want to move my OS (Windows 7 Pro) to the new partition that I created for it but I am not sure how I would go about it. Can I just copy/paste or is there another way?
P.S. This is off-subject but I was only after thinking of it. My wireless adapter is a fair bit away from my router and it seems to have trouble connecting to the router whenever the two other laptops are connected to it. I would think that this is due to interference because all of the computers are on the same channel, is there any way to change the channel and would this be of benefit to me?
I have Windows 7 RTM installed.
I am trying to move my Win 7 partition to a different partition.
I have made an exact hard drive replica, using Acronis True Image.
The only problem I'm facing is that when I installed Windows 7, it also made a "System reserved" partition, which I think contains the boot files.
What I want to know is:
How do I restore my exact hard drive replica on my new partition, and let the computer boot up successfully to my new partition?
I have a new PC (HP) that came with an OEM version of Win 7/64, I also purchased an SSD that I had planned to use for a boot disk with all libraries on a second 1TB HDD.
I successfully installed Win 7 on the SSD and was happy for a bit, until I discovered some instabilities. Long story short, HP does not release the drivers for their in-house products and I could not stabilize the system, so I moved the SSD to Drive D and re-installed from the factory image. All the drivers I need are there and system is 100% stable.
is there a way to move the System partition over to the SSD so I get the 10 second boot that was so nice?
yesterday I ordered a Crucial M4 128 Solid State Drive. I want to use it in my laptop as a bootdisk for my Windows (my laptop has 2 hard drive slots). My old hard drive came with an Acer recovery partition. My question is simple (I hope the solution is also simple): how do I move the recovery partition from my old hard drive to the Solid State Drive? All the necessary drivers are on the recovery partition, which is the main reason I want to have it on my SSD.
EDIT: will I lose the functionality of restoring my laptop when pressing ALT+F10 on boot?
In an attempt to move my paging file from my C: Partition , due to my unfamiliararity with the process , I've now got this file on both my C: drive and the new desired Partiton.Is it OK now to simply delete this file from the C: Partition , thus leaving me with only one paging file on this other Partition ?My reason for using this process is an attempt to reduce the size of an Image File of my C: Partition .
View 9 Replies View RelatedIs it a good idea to create a 10GB partition and use it solely to place page file?And then disable pagefile and use Eraser to securely free wipe the partition? Would this get rid of the contents inside pagefile for good? And does the speed and performance be affected if pagefile is in another partition?
View 4 Replies View RelatedI wish to partition my rebuilt PC into C: (OS only), D: (games and utilities), and E: (data) drives, my intention being to make future upgrades or OS reinstalls easier. (The machine currently only has one HDD.)Therefore I want to move C:users to the E: partition. I've already searched for ways to do this and there are seemingly three ways of going about it:1. Change the value in My Documents->Properties->Location tab as described here: Move Your Data to a Safer, Separate Partition in Windows 7 | PCWorld3. Leaving C:users where it is and using a symbolic link to E:users as described here: Move the Users Directory in Windows 7Is there a consensus on the 'best' method for doing this? If not, what are the advantages and disadvantages of each of the above methods?
View 3 Replies View RelatedI want to move My Documents folder to another partition (D:) but I'm wondering if I do will other users on the computer now be able to access the contents?
View 9 Replies View RelatedI have a partition on my hard drive and i would like to move my user files e.g. My Documents, pictures, videos etc.
I was wondering can i just drag the folder "Users" to the partition.
So basically I would like to know how i get the "Users" folder over to another partition.
So heres my problem: I installed Win 7 on a drive a while back and earlier today I decided that I needed more hard drive space. I saw that I had 100gb of unallocated space on the drive, but it was behind my Windows 7 partition, making it impossible to resize that partition. So I defragged with Perfect Disk 10 which moves all the files to the back of the partition, cleaned up, disabled all the usual things, ran defragger again, and then booted into a live cd of GParted. I then proceeded to move my Windows 7 partition behind the unallocated space so I could extend the volume.
Unfortunately, something went wrong and now I get the error message "Disk boot failure, please instert system disk and hit enter." So I followed the directions and ran startup repair, tried manually creating the bootmgr, and ran all the tests, but it still doesn't work. Luckily for me, I was able to reinstall Windows 7 on the unallocated space so I can at least get to the files on my other drive, which I discovered are all perfectly fine. I'm hoping this will be a quick fix since it seems like all the files are ok. What should I do so that I can boot back into that partition?
Long story short, I tried moving the partition, and something went wrong, and now I can't boot into that drive. I installed another copy of Win 7 on another partition and all the files are ok. What do I need to do to the original partition to get it to boot again?
I just made my partition with 14GB memory only. I have always an error that my partition is already full, but my folder I backupped is just 9GB.I want to ask if it is okay to cut and paste to my folder (pictures) to my new partition.
View 6 Replies View RelatedSo, I have a disk with Windows 7 installed on the 3rd partition of that disk. I want to move that installation to the first partition of the disk.Repartitioning and boot settings aside, is there a way to do that? (besides using sysprep)Last time I tried that, windows would load slowly and after ''Preparing your desktop'' screen it would just show the one-color desktop, no icons, no explorer shell loaded.Alt,Ctrl,delete works, for running ''explorer'' from task manager, but computer, control panel or anything system-related does not open, instead it pops up an error window with, (e.x.)''{ED7BA470-8E54-465E-825C-99712043E01C}'' not found.
View 6 Replies View RelatedMy Dell Optiplex 740 (AMD) is dying, and my company's IT has given me a Optiplex 745 (Intel) as a replacement.I'm a very lazy person , so naturally, I tried moving the drive with Windows 7 Enterprise x64 to the new machine.It didn't work: * Shortly after boot up, it will restart itself and go into repair mode * It will not be able to repair itself * Starting in Safe Mode also failedAs far as I know, the two PCs are completely different, except the graphic card and hard drives are the same.Is there anyway to "repair" this so it will work on the new machine? I'm avoiding reinstall since I really want to preserve my settings.
View 1 Replies View RelatedI'm wanting to move my copy of Windows 7 OEM Ultimate x64 to a new drive, with all the programs and that without reinstalling. I'm wanting to move it from my WD Black SATA2 drive to a SATA3 drive, which will be done via a PCIe Card. If this isn't possible to do, I'm fine using a fast SATA 2 drive.
I'm wondering if copying all the required folders Windows needs, putting them on a same-sized drive, unplugging the WD Black and doing a boot with that in the same SATA port.
I would like to move windows 7 and some of my games and apps to my new faster HDD, how would i go about doing this correctly? (so it is the boot drive and games run from the new drive)
View 13 Replies View RelatedUsing Windows 7, my "C" drive is a small solid state drive and all I wish to have on it is my Win 7 operating system. My "D" drive is mechanical and 500 Gig so I would like to have as much as possible on that drive. How do I move my Favorites folder to my "D" drive and have it always available when I open my Internet Explorer?
View 1 Replies View RelatedI currently have a hard drive with two partitions dual booting Win 7 and Vista. I need to move both OS's to a new hard drive. I've made a full backup of the drive with the Macrium Reflect program, but I don't know if restoring it on a new hard drive using the recovery CD will work. Will there be any problems booting the operating systems afterwards? Is there a better way or better program to do this? Does the type or brand of the new hard drive make a difference?
View 9 Replies View RelatedI want to either move or restart Windows Backup to a new drive. So I'd like to wipe the current Backup off the drive it is currently on. I really don't care that much about saving older recovery points. Is there a way to just switch where the recovery is saved and once a new restore point has been created on the new drive I could just delete the old files on the other drive?
View 6 Replies View RelatedSo I just moved my laptop hard drive To my desktop to run windows 7 but it keeps stopping at the starting windows and running system boot repair but it can't fix it or somthing. Im probably guessing it's the drivers causing the problem cause it's Moved to my desktop but any way to get around it?
View 1 Replies View RelatedWhat to do with my Imac 27" that goes suddenly black when using windows 7 enterprise, but computer still seems to be working, I can hear audio and the hard drive is still moving. Is it hardware or software problem? Sometimes it happens frequently, others does not happen at all.
View 1 Replies View RelatedI am doing a motherboard upgrade for a friend. I need to know how I can move his hard drive with his current OS instal to the new motherboard without having to do a fresh Windows 7 install. He has too much that cannot be replaced. Is there a way to do this?
View 2 Replies View RelatedI created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies View Relatedi recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies View RelatedI have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
View 4 Replies View RelatedThere doesn't seem to be much information "out there".I have an XP machine (or did - it died hence the move to 7). In addition to the C system drive I had an F and a G drive, both had file systems and a ton of valuable files.ALL of Microsoft's "helpful" data migration tools are useless when you don't have a working system!I want to plug these drives into my 7 system, tell 7 that these are NTFS drives - and magically see all my files appear.But I am not having any luck finding a "how to".
View 2 Replies View RelatedFound these instructions on net but I got lost at #7: Quote: The My Documents folder is part of Windows 7's new Documents Library. A library combines multiple folders that contain similar types of files.
To move your documents to the D drive:
1. Create a new documents folder on the D drive.
2. Right-click the new folder and click Include in Library > Documents .
3. Click Start > Documents .
4. Double-click My Documents to show its contents.
5. Drag and drop the files to the new folder.
6. Press F5 to refresh the view.
7. Under Documents Library , click locations .
8. Right-click the new folder and click Set as default save location .
9. [Optional] Click My Documents and click Remove . move the My Documents folder to another drive - Microsoft Community Where is Documents Library > locations?
I got a new 1.5TB HDD and 16gb SSD. I installed Win 7 on the SSD and formatted the the new HDD. My main issue is the SSD is running out of memory abnormally quickly. I find myself running CCleaner every 30 mins... I don't know where the memory is coming from.... Windows takes up 12gb so that leaves me 4gb. I'd like to transfer any major folders like My Documents, etc so I can leave my drive at 12gb and everything else go on my completely empty 1.5tb drive.
View 9 Replies View RelatedI recently purchased a 7200 rpm WD SATA drive and would like to migrate my Win 7 drive from a slower 5200 rpm Seagate SATA.Can I do this without reinstalling Windows?f I can migrate from one to the other, will there be any problems with validation?
View 1 Replies View Related
