I'm wanting to move my copy of Windows 7 OEM Ultimate x64 to a new drive, with all the programs and that without reinstalling. I'm wanting to move it from my WD Black SATA2 drive to a SATA3 drive, which will be done via a PCIe Card. If this isn't possible to do, I'm fine using a fast SATA 2 drive.
I'm wondering if copying all the required folders Windows needs, putting them on a same-sized drive, unplugging the WD Black and doing a boot with that in the same SATA port.
My Dell Optiplex 740 (AMD) is dying, and my company's IT has given me a Optiplex 745 (Intel) as a replacement.I'm a very lazy person , so naturally, I tried moving the drive with Windows 7 Enterprise x64 to the new machine.It didn't work: * Shortly after boot up, it will restart itself and go into repair mode * It will not be able to repair itself * Starting in Safe Mode also failedAs far as I know, the two PCs are completely different, except the graphic card and hard drives are the same.Is there anyway to "repair" this so it will work on the new machine? I'm avoiding reinstall since I really want to preserve my settings.
I currently have a WD 120GB drive that i installed my win 7 on, but this drive is old and very slow.I have a brand new 1.5 TB drive and i was wondering if there is an easy way to move the win 7 installation to that new drive without much hassle.
I would like to move windows 7 and some of my games and apps to my new faster HDD, how would i go about doing this correctly? (so it is the boot drive and games run from the new drive)
Using Windows 7, my "C" drive is a small solid state drive and all I wish to have on it is my Win 7 operating system. My "D" drive is mechanical and 500 Gig so I would like to have as much as possible on that drive. How do I move my Favorites folder to my "D" drive and have it always available when I open my Internet Explorer?
I currently have a hard drive with two partitions dual booting Win 7 and Vista. I need to move both OS's to a new hard drive. I've made a full backup of the drive with the Macrium Reflect program, but I don't know if restoring it on a new hard drive using the recovery CD will work. Will there be any problems booting the operating systems afterwards? Is there a better way or better program to do this? Does the type or brand of the new hard drive make a difference?
I want to either move or restart Windows Backup to a new drive. So I'd like to wipe the current Backup off the drive it is currently on. I really don't care that much about saving older recovery points. Is there a way to just switch where the recovery is saved and once a new restore point has been created on the new drive I could just delete the old files on the other drive?
So I just moved my laptop hard drive To my desktop to run windows 7 but it keeps stopping at the starting windows and running system boot repair but it can't fix it or somthing. Im probably guessing it's the drivers causing the problem cause it's Moved to my desktop but any way to get around it?
What to do with my Imac 27" that goes suddenly black when using windows 7 enterprise, but computer still seems to be working, I can hear audio and the hard drive is still moving. Is it hardware or software problem? Sometimes it happens frequently, others does not happen at all.
I am doing a motherboard upgrade for a friend. I need to know how I can move his hard drive with his current OS instal to the new motherboard without having to do a fresh Windows 7 install. He has too much that cannot be replaced. Is there a way to do this?
There doesn't seem to be much information "out there".I have an XP machine (or did - it died hence the move to 7). In addition to the C system drive I had an F and a G drive, both had file systems and a ton of valuable files.ALL of Microsoft's "helpful" data migration tools are useless when you don't have a working system!I want to plug these drives into my 7 system, tell 7 that these are NTFS drives - and magically see all my files appear.But I am not having any luck finding a "how to".
Found these instructions on net but I got lost at #7: Quote: The My Documents folder is part of Windows 7's new Documents Library. A library combines multiple folders that contain similar types of files.
To move your documents to the D drive:
1. Create a new documents folder on the D drive.
2. Right-click the new folder and click Include in Library > Documents .
3. Click Start > Documents .
4. Double-click My Documents to show its contents.
5. Drag and drop the files to the new folder.
6. Press F5 to refresh the view.
7. Under Documents Library , click locations .
8. Right-click the new folder and click Set as default save location .
9. [Optional] Click My Documents and click Remove . move the My Documents folder to another drive - Microsoft Community Where is Documents Library > locations?
I got a new 1.5TB HDD and 16gb SSD. I installed Win 7 on the SSD and formatted the the new HDD. My main issue is the SSD is running out of memory abnormally quickly. I find myself running CCleaner every 30 mins... I don't know where the memory is coming from.... Windows takes up 12gb so that leaves me 4gb. I'd like to transfer any major folders like My Documents, etc so I can leave my drive at 12gb and everything else go on my completely empty 1.5tb drive.
I recently purchased a 7200 rpm WD SATA drive and would like to migrate my Win 7 drive from a slower 5200 rpm Seagate SATA.Can I do this without reinstalling Windows?f I can migrate from one to the other, will there be any problems with validation?
I have a question (and I'm not quite sure where it should go in the forums):I'm going to buy a 90gb SSD to include in my current pc build and my intention is to use it as a primary boot drive. The problem is (as you may guess) that I already have installed windows 7 32bit on my HDD.Is there anyway to "move" the boot drive without having to reinstall and/or delete everything I currently have (estimated 200gb of data)????
When my motherboard fried on my Acer 6930g I bought another Acer 6930g from ebay.
My intention was to put my old hard drive in the new machine and put the new hard drive in the spare hard drive slot that the 6930g has. I have done this and it all works. However.....
As my old HD is nearly full and not running as fast as the empty new one I was thinking of swapping them again. I would though like to put some of my essential programs and docs on the new HD. The new HD has windows 7 home pro 64 bit. My existing HD is windows home 32 bit. I haven't got any of the product keys for my software so i can't reinstall.
How can I move my essential stuff over and keep it working? Not sure if this makes any sense but hoping womeone will know what i am on about.
I have Windows 7 N Ultimate. I just bought Paragon Migrate. I tried to move os only to SSD. Although it has option of selecting other stuff to move, when i choose something, it doesn't get chosen and program just not choosing anything but OS. But this is not an issue. The issue is, when it gets to DOS after restart to finish moving os, at some point while it is moving, I get error message "Some Error occurred: Bad parameter of function". At the same time, at the top right corner it says Succeeded. When I try to boot from SSD I get strange error window saying "Windows failed to start 0xC0000034 Unexpected error.
Went to test drive Windows 7 drive image backup and because the Vista/Windows 7 boot manager is on XP (triple boot), Windows 7 needs to run the backup to include XP drive as well.
Can I move the boot manager from XP to the Windows 7 drive so I can run the backup of Windows 7 without including XP's drive?
Note: Because I use Dell's Media Direct on Vista, only the XP drive is a Primary Drive, Vista & Windows 7 are Logical. Not sure if thats going to matter.
I'm OK with command prompt & bcdedit. What I'm not sure about is the term "store", Is it the store that contains the boot manager and by moving the store, will it reassign/rework the boot loaders for each OS drive?
I understand its critical to not make mistakes here and have exported the store to different locations including a thumb for backup. But if this goes bad, I might need help getting a bootable system back.
Wish I had a spare 2.5 drive lying around, it would have made testing Windows 7 a lot easier.
Since I have a problem with my pc being too full with stuff I recently purchased an external Hard Drive (Iomega hdd 1 thera byte), and wanted to move some things from my computer to that hard drive!But I sincerely don't know what to move or how!Which folders are important and can't be moved? Which ones can I just put on the HDD?And also is there a good program that can do all this moving fancy shmancy or do I have to copy and paste?
So I have 4 hard drives and a SSD at the moment, but i'm trying to add 3tb hdd in place of another old smaller drive. When I installed windows I had 3 drives plugged in so some how it put the MBR on one hard drive and my windows on another. Now when I unplug one hard drive to add my new one my computer says there are no bootable devices. Is there a way to maybe move it to my ssd with my new windows on it? or Make a new one?
I now realise i should of hit custom install, and installed it on another drive, is it to late to move them, the only things in there are what were installed by microsoft.
I am using Windows 7 Home Premium N and XP Home on a dual-boot system but I want to move my Windows 7 partition from one drive to another but am not sure how to do it. Currently XP is on partition C: and Windows 7 on partition O: and essentially, what I want to do is to move partition O: to my main drive where space is already available for this to be done.
I have seven drives on my system amounting to 6.5Tb (2Tb on external drives) and currently Windows 7 is on a partition on one of the internal 1Tb drives. However, I would like to free up the space being used and place Windows 7 in a separate 50Gb partition at the end of my main drive (500Gb). Since I pre-partitioned the current Windows 7 partition before installation, I do not have the 'hidden' partition I've read so much about.
I have an old DOS version of Ghost on a boot CD and can readily back up the current Windows 7 partition ready for recovering to the prepared partition on my main drive. Once transferred I then want to delete the current Windows 7 partition. However, I know there is more to it than this! I am quite happy to reletter the partition to drive O: since I have software installed on the Windows 7 partition which is referred to in the registry.
All this I'm fairly confident about doing - but it is operations involving the boot manager that I am completely unsure of. How does the system know where the boot info is located? What points it to the right partition/drive? Does it refer to the drive and/or partition? Is there anything else I just may have overlooked? Finally, should I perhaps just leave it where it is until I'm ready to do a reinstall on the appropriate partition?
A lot of questions I'm afraid but I would appreciate some help as I'm fairly new to the question of dual-boot systems and boot management.
PS I have been looking for info on this in all sorts of places but have not so far found the answers to my questions. Sorry for any inconvenience if the info I'm looking for is already on this, or another, site. It's just that I've not found the info so far and any help being pointed in the right direction would be appreciated.
i read, on another forum, that this could be done like so... Lets imagine you have a PC with 3 accounts.
One is a plain admin account, (administrator) another is an account you have created for the move (adminmove) and the other is a boggo ussr account (user)
Shut down PC (important)
Fire up PC, log on as administrator. Run regedit and go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProfileList
Change profilesdirectory to the new location. Any new users will now have their profiles go there.
go to your documents and settings folder. copy the adminmove and user folders to the new location. You will not get errors about files being locked UNLESS you have services using any of these user accounts to log on. To find out if you do go start>run>services.msc and make sure the log on as section uses no user accounts there.
Leave the S-15-18, S-15-19 and S-15-20 subkeys alone. Those profiles take up next to no space and I wouldn't risk changing them.
You will see some S-15-XX-blah subkeys. These are for the user accounts that exist on the computer. Within each key is a ProfileImagepath REG_EXPAND_SZ
Change these for all but the account you are logged on as. Shutdown and restart the PC. Log on as adminmove.
start>run>cmd
type set and make sure the USERPROFILE shows the new location.
Move the administrator folder from documents and settings to the new location. Go into regedit again and change the profileimagepath for the administrator account.
Job done. If you want you can delete the profile for the adminmove account and delete the user. Use My computer/properties to delete the profile though. Do not use windows explorer
P.S. If you are determined to move the localservice and networkservice folders, boot in safe mode
This was posted by badass - Move the entire Documents and Settings folder to a different partition?
I have just moved back from mac to pc. I have a 4 year old LaCie External drive that has everything backed up from my mac. I know most of it will be useless but I need my budget spreadsheet and want my photos, and stuff like that. Trouble is when I connect it to my new pc, Gateway One, is shows up in Devices and Printers but not as a clickable drive in My Computer. It's been tried on several other computers and laptops, all running windows 7, with the same result. Could this be because it was used on a mac? I thought it would at lest show up, then I could get off it what was usable. The paperwork that came with the drive says it's good on either pc or mac. Or could it be too old for windows 7? I did go to their web site and download drivers, didn't help. By the way, my son tried it on his works laptop, running xp. He's not allowed to install anything so he couldn't let the windows drivers run. We thought maybe it still might show up in My Computer, but it didn't.
I've had this laptop for a few months now and I got another hard drive called Data which is empty, my other hard drive called OS is where everything goes and I wondered if I can move games and other files to my Data hard drive without corrupting them. And if possible can I move a file called Program Files to my Data hard drive without causing any problems. My pc takes a long time to restart which I guess my OS decides. My OS got is 80gb of 238GB and my Data is 332gb big, with no files in it.
I have 465gb of files and folders on a 500Gb hard drive that needs to be cut/pasted higher in the folder hierarchy.
Here's a visual:
The reason this happened is my HD broke down and I had to send it to a company (ChronoDisk) to extract the information to another HD. This is how they sent it.
I need to move those files because the path used by many programs/files are broken. Is it possible to do this without actually cut/pasting? My guess is it might crash half way or simply not work at all because there is not enough empty space to make a cut.
This might be a bit of a dumb question but I just want to check is it safe to directly cut and paste the my favorites, documents, pictures, music and video folders to another hard drive on my PC or I should do them manually through properties of each folder. Currently I'm using windows 7.
I've been using Windows 7 pro 64bit for a while. My issue is that I want to put in a new hard drive and install windows 7 on that without loosing or moving all my data onto my new hard drive. Can someone tell me what is the most painless way to go abouts doing this?
I'm somewhat confused over correct way to achieve something.I have only just upgraded to Windows 7Previously I had OS on my C drive and 'user' folders on a physically different drive.I have done a little googling .. some results show multiple pages on text on how to do this, another use 'mlink'another using robocopy & whole load of cmd line stuff, another says do it within users profile setting.hat is the simple way of moving the 'users' folder (with the number of sub user folders) to a different drive, and removing the original folders ... i.e. keeping the house clean.Purpose is to keep user data such as my documents etc
Windows 7 32 bit WMP 12 2 internal hard drives - 'C' - Program Files and 'D' Data (includes music files)
My 'D' drive is almost full due to too much music. I would like to move (not just copy) MOST of the music files from my internal 'D' drive to an External Hard Drive. However, for the music that I want to move off of the internal drive, I have numerous Playlists created.
If I move the music to an external hard drive (only plugging it in when I want to access those music files) will the playlists still know where the music has gone to? Or do I have to recreate the playlists?
I had Dell XPS 8300 Desktop & had bought & Installed Windows-7 ( Ultimate ) on it's 500 GB HDD.I gave that system to my relative except Hard Drive.Now I bought Dell T-7500 Workstation with only DOS installed on it's hard drive to save some money & because I already have Windows-7 ( Ultimate ) DVD.I took out the hard drive with DOS from the workstation & replaced it with the hard drive that I had in XPS with Win-7 already installed.I then tried to boot it in the workstation but it wouldn't boot & gave error messages.So I formatted the OS Partition & fresh installed Windows-7. Now it does load Windows -7 but first it goes thru some other commands as follows when I start the system.
Dell SAS 6 Host Bus Adapter BIOS MPTBIOS 6.22.03.00 ( 2008.08.06 ) Initializing..... Press Ctrl - C to run SAS Configuration Utility Searching for Devices at HBA 0..... Dell MPT Boot ROM Successfully installed
Then it loads Windows-7.All of above happens on its own, I didnt touch anything.So what is going on & what do I have to do get rid off those initializing commands ? I have never had this happen to any previously owned Dell systems.Also I haven't installed any drivers yet but Sound, Video & Internet does work.Do I need to install any drivers & if yes, which ones ?Here is the configuration of Dell workstation T-7500 :
Intel(R) Xeon(R) E5645 2.40GHz, 12M cache, 5.86 GT/s QPI, Turbo, HT, 6C Intel(R) 5520 Chipset DOS Factory Installed (English) Integrated Intel(R) SATA 3.0Gb/s controller with support for RAID Integrated High Definition Audio
