Moving The 'Users' Folder From C: To Another Drive
Jul 24, 2009
I want to move the users folder from C: to D:.
i read, on another forum, that this could be done like so...
Lets imagine you have a PC with 3 accounts.
One is a plain admin account, (administrator) another is an account you have created for the move (adminmove) and the other is a boggo ussr account (user)
Shut down PC (important)
Fire up PC, log on as administrator. Run regedit and go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProfileList
Change profilesdirectory to the new location. Any new users will now have their profiles go there.
go to your documents and settings folder. copy the adminmove and user folders to the new location. You will not get errors about files being locked UNLESS you have services using any of these user accounts to log on. To find out if you do go start>run>services.msc and make sure the log on as section uses no user accounts there.
Leave the S-15-18, S-15-19 and S-15-20 subkeys alone. Those profiles take up next to no space and I wouldn't risk changing them.
You will see some S-15-XX-blah subkeys. These are for the user accounts that exist on the computer. Within each key is a ProfileImagepath REG_EXPAND_SZ
Change these for all but the account you are logged on as.
Shutdown and restart the PC. Log on as adminmove.
start>run>cmd
type set and make sure the USERPROFILE shows the new location.
Move the administrator folder from documents and settings to the new location. Go into regedit again and change the profileimagepath for the administrator account.
Job done. If you want you can delete the profile for the adminmove account and delete the user. Use My computer/properties to delete the profile though. Do not use windows explorer
P.S. If you are determined to move the localservice and networkservice folders, boot in safe mode
This was posted by badass - Move the entire Documents and Settings folder to a different partition?
I'm somewhat confused over correct way to achieve something.I have only just upgraded to Windows 7Previously I had OS on my C drive and 'user' folders on a physically different drive.I have done a little googling .. some results show multiple pages on text on how to do this, another use 'mlink'another using robocopy & whole load of cmd line stuff, another says do it within users profile setting.hat is the simple way of moving the 'users' folder (with the number of sub user folders) to a different drive, and removing the original folders ... i.e. keeping the house clean.Purpose is to keep user data such as my documents etc
I got a new laptop at work, and the IT group performed the initial setup. Of course, they entered my name incorrectly. I am the "administrator" on this computer, and I made the correction. However, on the C: drive, under the C:Users folder, my misspelled name persists. I select then right-click, but I cannot change the folder name. I see that the "lock" symbol is displayed next to the folder name, so obviously, the folder is locked and that explains why I can't change the folder name. How do I change a folder's name under C:users?
I followed the illustration in a previous posting for this subject, provided by Mike, and 'moved' my folders to D:. am confused to see that they are now in 2 locations - ie still on the C:. When I go to C: prompt and call up DIR for D: it tells me there are no files there, although I can see them in Explorer.Can I just delete the folders on the C: or am I going to cause a problem doing this (hidden system files within the folders???). Should I only delete the actual files?
I'm running Win 7 Home Prem 64, I attached my old C drive to retrieve some files from the USERS folder but it's not showing, I've tried a few things to take ownership of the drive etc but it's still not there.
Is there a method to link my entire C:/users folder to another drive with out the need to reinstall anything and have things work perfectly as the way they were? What I want is all the read and writes to be done on another drive.
Using Windows 7, my "C" drive is a small solid state drive and all I wish to have on it is my Win 7 operating system. My "D" drive is mechanical and 500 Gig so I would like to have as much as possible on that drive. How do I move my Favorites folder to my "D" drive and have it always available when I open my Internet Explorer?
This might be a bit of a dumb question but I just want to check is it safe to directly cut and paste the my favorites, documents, pictures, music and video folders to another hard drive on my PC or I should do them manually through properties of each folder. Currently I'm using windows 7.
I took out my Windows 7 boot drive and put it inside of a USB enclosure and when I try and go to my profile, I can't open Users folder on other computer. I don't have an administrator account on this other computer. Is there any way to open up the folder? It just says access denied when I try and open it up on a windows xp computer with no ADMIN privileges (I can't get admin on this computer).
On a XP computer that has admin it opens fine. I figured since I actually wasn't using the OS that was on the drive I wouldn't have any trouble reading any folders on it (but I guess that because it's NTFS there are more security measures, unlike FAT32 which would let anybody read anything). Would I just need to open up the folder on a computer with admin and then copy the things over while I still have admin.
I am the equipment manager for a DJ service. I recently talked my boss into letting me build windows based systems for our DJ's to use instead of a prebuilt DJ console that would cost more than twice what my design would. One of the biggest concerns we have is the ease of one of our DJ's to simply bring an external HDD with them and copy our music library while they are at a gig. Licensing and legal use of music is a top priority to us. All of my searches online have not yielded any useful information. I need to find a way to restrict a user from copying and moving files, but still give them access to play the music files. Is there a way to do this without buying an extra security program?
I'm attempting to use the guide posted on lifehacker to move the users folder to a different drive as Windows 7 is installed on a rather small SSD.The guide is here: Move the Users Directory in Windows 7I followed the directions to the letter, except of course, when it came to fixing the drive letters. C: was swapped to e: while the drive that I would like users on is f:I've tried it with and without /copyall. I've tried changing the switch to - instead of /, and I've tried using /xjd instead. But every single time, robocopy skips 37 (of 195) directories and the process fails.Does this guide simply not work? Or am I missing something? I'd really like to move the whole thing (especially Appdata), not just documents.I'm using upgrade media of Windows 7 home premium 64bit and a fresh installation of Windows 7 (unactivated as yet - though I had the same problem before with a fully updated/activated version of windows.)
File with my first name has been created in the "Users" folder. (my name is the one that appears as the computer owner and administrator) This is something that I've never seen before and I want to delete it.
For reasons I had to reinstall windows. I have to drives, a SSD and a HDD. The ssd got wiped but the HDD is still as it used to be. I have done with junctions so that programfiles,users and programdata are all on the HDD instead of the system drive SSD. Everything would be nice and dandy if I would still have the same C:Users*username* as before, but for some reason i now have C:users*username.username-pc.000* The -pc.000 came with the new installation and i do not need nor want it. Is there a way to make my computer think that C:users*username* is my userfolder?
While I was searching for something, my C:/users folder disappeared.So my desktop lost all its folders and some icons and shortcuts. And of course I had no 'Documents' folder, etc.I then discovered that I had no System Restore points (I've created some now).I finally managed to work out that somehow 'show hidden filles and folders' had been un-ticked.So I ticked that option, and now all the missing items are back - but they're all 'pale' and all the icons within those folders are 'pale' as well.What does this mean? I can open the files and folders.
I have W7 64 bit and have my main HD partitioned c:/ - 100 gig, F:/ Data - balance of 500 Gog. I have retained the old XP filing system of most self generated data being in a main "My Documents" folder with sub folders such as My Music, My Word Docs, My Pictures etc (I include Outlook in this). My data partition therefore holds most of my data and is frequently backed up to another drive with Synch Toy. However the Users folder is still on the C: drive and accumulates data such as downloads etc. I have Googled this issue and it seems very difficult to move the Users foler to another partition.
I had copied over my old vista Users folder and finally got around to moving over all the files. I tried to delete the folder but 3 hidden folders don't won't to delete themselves leaving me stuck with the directories.
Users_VistaUserDocuments My Music My Pictures My Videos
I've tried removing them through explorer, elevated command prompt, built-in administrator account. Trying to access them gives access denied, and try to change permissions on the file gives access denied, even in administrator account.Based on the command-prompt messages it seems like the folder have actually been deleted but the reference still exists under Documents.
> dir "My Music" Volume in drive D has no label. Volume Serial Number is 72EC-B45D Directory of D:Users_VistaUserDocumentsMy Music
I like my comp to have only one download location, only 1 temp folder, etc.Regarding users folder I don't know how windows works with these folders, because in every Windows OS I can recall, there have been always multiple folders, even if you set your computer to work with only one user that is you, the absolute and total administrator. Then you can see a default user, a "yourusername" folder, a public folder, an all user folder. Also when installing software sometimes they put their shortcuts into default, sometimes into all and sometimes just in yourusername user folder. Is it safe to delete all folders but the "yourusername" folder? if not, which are the folders you have to keep? Is there a way to make these folders to converge into one? A thing i hate is installing software and not knowing where did it put archives into my computer. I usually check the program files folder, but have seen many times left over folders, some empty some not. Then again the users folder is a mystery to me as if it will keep files from a never used again software forever or not.There is also a Program Data hidden folder.
I have migrated my Windows 7 OS to a SSD, but my Users folder is too large to migrate. I am going to set a junction between C:Users on my SSD and F:Users on the HDD where my OS was originally. The instructions I have read indicate that I need to rename the C:Users folder in order to set the junction, since it will not work if there is still a folder named C:Users. However, there is no ""Rename" option available when I right-click on C:Users. In fact, several of the folders in the root directory of C: have no "Rename" option.
We have a few computers in the Lybrary are used by everyone so C:users is filled up, sometimes with 50 or more Gb. All the files in that folder are brought down from the server everytime they login. Is there a script I an program to run on shutdown that will clean that folder of everything except the C:userspublic folder?
Can any one tell me a good reason why when I move a folder of folders and files any executables in those folders loose their compatibility and administrative settings?
Is there any way to prevent this happening?
If not, is there any way to apply this setting for a collection of files rather than one by one?
Alright, recently I've had a weird problem. My desktop has apparently.. de-synced with the Users\username\Desktop folder. It's a mild annoyance at the moment, because I'm playing with modding a few games I have, but sooner or later I'll actually need my desktop back.I can't actually move anything from the desktop itself, almost like the files aren't even on the screen. It's also not updated with the files I've added to the username\Desktop\ folder, nor with the ones I've deleted.I've tried system restore, but it didn't do anything.
Since re-installing Windows 7, I can't open the Users folder on my other data drive. The green bar goes almost to the end of the X, then freezes. I've tried leaving it for a couple hours and it's still in the same spot.I've tried disabling the thumbnails and indexing is disabled, still the same.
Some folders in my computer are blocked as in i cannot modify their content only read them.When accessing the security tab it shows that my user (which is suppose to be the only one on the computer) has limited access and some users which i consider bogus (they have names like S-347373-26262 etc.) have full accessTried formatting they are still there
I have a system with Windows 7 Home Premium 64-bit installed on the C: drive and the Users folders moved to the D: drive (per the directions in this tutorial User Profiles - Create and Move During Windows 7 Installation. I have a new motherboard (Asus ASUS P8Z68-V PRO/GEN3), CPU (Intel I5-2500k), memory (Mushkin Enhanced Blackline 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 ), SSD (Corsair Force Series GT 120GB) and Windows 7 Home Premium 64-bit on order that I want to swap into this system. Well, actually, I guess that it is mostly a new system with my old D: data drive, power supply and case.I have a few questions about the best way to go about getting up and running with the least amount of headaches: The new MB has a UEFI BIOS, so does that mean that it will automatically create a GPT style disk on the SSD for the new Windows 7 installation, or is there the option to create a MBR style disk? The reason that I ask, is that I use Macrium Reflect Free to make drive image backups of the C: drive periodically and it doesnot work with GPT disks apparently. My thoughts are to leave all of the data on the D: drive as it is, and do a clean install of Windows 7 on the new SSD after all of the components are swapped out. Would it be better to rename the Users folder on my D: drive, install Windows 7 and use the same tutorial as above to move the Users at this time, thus creating a second version of the Users folder and then delete the new and rename the old, or would it be better to install everything to the new SSD, and then after installation, then move the individual folders and point them to the existing folders on the D: drive? Is there a difference in moving Users folders during installation and moving after installation? It looks to me like the move during installation moves the ProgramData folder as well. For those that do clean re-installs, is there a good generic way to preserve application preferences/configurations/settings for installed applications and then be able to use them after everything is installed back? If I can use the existing Users folder that is on my D: drive after the install of Windows 7, will this do what I am looking for? In the past, I have used various techniques like screen prints, some apps have a preferences file that can be saved and moved back,
i want to check why my bandwith is overloaded. I have server on my own computer, and want to check what exactly users are downloading from it, is there any program for it?
I have an issue with Sharing a Folder on a Windows SBS 2011 Domain. On my Windows 7 Client Computer I want to Share one particular folder, but not with "Everybody". Instead I just want to share the Folder with one colleague Toward this end I enabled Sharing on the folder and gave Brendon permission to access the share.
Whenever I move folders from my shared folders ( Users/public/public documents for example) it copies the files instead of just simply moving them. The folders are on the same hard drive/partition so there does not seem to be any reason it should start doing this. I dont know what I could have changed on the computer to cause this to happen either. it is quite a frustrating problem however because large files take a while to transfer when they should be moved instantly.
I made a really dumb mistake last night while setting up a VPN. Long story short I deleted my user account. Now, I did not lose any data at all (the account's folder still exists, untouched, in the /Users folder), it is just the user account picture and log in information that are gone. I have no way (that I know of) of re-referencing it so that it appears on my log-in screen again.My issue is that I effectively lost some programs and all configuration files that were exclusively associated with that account. Which is years of config data that I would HATE to have to do again. My questions are as follows (which are two sides of the same coin really).
Is there some way to re-reference this user account so it shows up and loads up like normal on windows login once again? (The system displays it as "User Unknown")f not, is there something that I can do with the /AppData folders of the new (recently created) and old ("deleted") accounts to make my new account be just like the old one?
I have a 2TB drive that is split into 2 partitions, Partition A has a fresh install of Win 7 Ultimate on it, Partition B is a copy of all the info from my old hard drive. For some reason the Windows 7 install Users folder with all the data in it is being copied to the WindowsDocuments & Settings folder of the old data. Also another weird thing is if I delete any of the mirrored files from Partition B x:WindowsDocuments & SettingsXXXX on they will also be removed from Partition A's x:UsersXXXX. Its driving me a little crazy, if anyone knows what could be happening please let me know whats going on. One more thing, I have unmounted Partition B to see if the files are sym linked from Partition A, but it doesn't seem like the folders are sym linked as the files still accessible while Partition B is unmounted. One more thing is that the only data being replicated is the Primary User account and everything that resides in it.