When my motherboard fried on my Acer 6930g I bought another Acer 6930g from ebay.
My intention was to put my old hard drive in the new machine and put the new hard drive in the spare hard drive slot that the 6930g has. I have done this and it all works. However.....
As my old HD is nearly full and not running as fast as the empty new one I was thinking of swapping them again. I would though like to put some of my essential programs and docs on the new HD. The new HD has windows 7 home pro 64 bit. My existing HD is windows home 32 bit. I haven't got any of the product keys for my software so i can't reinstall.
How can I move my essential stuff over and keep it working? Not sure if this makes any sense but hoping womeone will know what i am on about.
There doesn't seem to be much information "out there".I have an XP machine (or did - it died hence the move to 7). In addition to the C system drive I had an F and a G drive, both had file systems and a ton of valuable files.ALL of Microsoft's "helpful" data migration tools are useless when you don't have a working system!I want to plug these drives into my 7 system, tell 7 that these are NTFS drives - and magically see all my files appear.But I am not having any luck finding a "how to".
Since I have a problem with my pc being too full with stuff I recently purchased an external Hard Drive (Iomega hdd 1 thera byte), and wanted to move some things from my computer to that hard drive!But I sincerely don't know what to move or how!Which folders are important and can't be moved? Which ones can I just put on the HDD?And also is there a good program that can do all this moving fancy shmancy or do I have to copy and paste?
So I have 4 hard drives and a SSD at the moment, but i'm trying to add 3tb hdd in place of another old smaller drive. When I installed windows I had 3 drives plugged in so some how it put the MBR on one hard drive and my windows on another. Now when I unplug one hard drive to add my new one my computer says there are no bootable devices. Is there a way to maybe move it to my ssd with my new windows on it? or Make a new one?
I've had this laptop for a few months now and I got another hard drive called Data which is empty, my other hard drive called OS is where everything goes and I wondered if I can move games and other files to my Data hard drive without corrupting them. And if possible can I move a file called Program Files to my Data hard drive without causing any problems. My pc takes a long time to restart which I guess my OS decides. My OS got is 80gb of 238GB and my Data is 332gb big, with no files in it.
I have 465gb of files and folders on a 500Gb hard drive that needs to be cut/pasted higher in the folder hierarchy.
Here's a visual:
The reason this happened is my HD broke down and I had to send it to a company (ChronoDisk) to extract the information to another HD. This is how they sent it.
I need to move those files because the path used by many programs/files are broken. Is it possible to do this without actually cut/pasting? My guess is it might crash half way or simply not work at all because there is not enough empty space to make a cut.
This might be a bit of a dumb question but I just want to check is it safe to directly cut and paste the my favorites, documents, pictures, music and video folders to another hard drive on my PC or I should do them manually through properties of each folder. Currently I'm using windows 7.
I've been using Windows 7 pro 64bit for a while. My issue is that I want to put in a new hard drive and install windows 7 on that without loosing or moving all my data onto my new hard drive. Can someone tell me what is the most painless way to go abouts doing this?
I currently have a hard drive with two partitions dual booting Win 7 and Vista. I need to move both OS's to a new hard drive. I've made a full backup of the drive with the Macrium Reflect program, but I don't know if restoring it on a new hard drive using the recovery CD will work. Will there be any problems booting the operating systems afterwards? Is there a better way or better program to do this? Does the type or brand of the new hard drive make a difference?
Windows 7 32 bit WMP 12 2 internal hard drives - 'C' - Program Files and 'D' Data (includes music files)
My 'D' drive is almost full due to too much music. I would like to move (not just copy) MOST of the music files from my internal 'D' drive to an External Hard Drive. However, for the music that I want to move off of the internal drive, I have numerous Playlists created.
If I move the music to an external hard drive (only plugging it in when I want to access those music files) will the playlists still know where the music has gone to? Or do I have to recreate the playlists?
I had Dell XPS 8300 Desktop & had bought & Installed Windows-7 ( Ultimate ) on it's 500 GB HDD.I gave that system to my relative except Hard Drive.Now I bought Dell T-7500 Workstation with only DOS installed on it's hard drive to save some money & because I already have Windows-7 ( Ultimate ) DVD.I took out the hard drive with DOS from the workstation & replaced it with the hard drive that I had in XPS with Win-7 already installed.I then tried to boot it in the workstation but it wouldn't boot & gave error messages.So I formatted the OS Partition & fresh installed Windows-7. Now it does load Windows -7 but first it goes thru some other commands as follows when I start the system.
Dell SAS 6 Host Bus Adapter BIOS MPTBIOS 6.22.03.00 ( 2008.08.06 ) Initializing..... Press Ctrl - C to run SAS Configuration Utility Searching for Devices at HBA 0..... Dell MPT Boot ROM Successfully installed
Then it loads Windows-7.All of above happens on its own, I didnt touch anything.So what is going on & what do I have to do get rid off those initializing commands ? I have never had this happen to any previously owned Dell systems.Also I haven't installed any drivers yet but Sound, Video & Internet does work.Do I need to install any drivers & if yes, which ones ?Here is the configuration of Dell workstation T-7500 :
Intel(R) Xeon(R) E5645 2.40GHz, 12M cache, 5.86 GT/s QPI, Turbo, HT, 6C Intel(R) 5520 Chipset DOS Factory Installed (English) Integrated Intel(R) SATA 3.0Gb/s controller with support for RAID Integrated High Definition Audio
So I just moved my laptop hard drive To my desktop to run windows 7 but it keeps stopping at the starting windows and running system boot repair but it can't fix it or somthing. Im probably guessing it's the drivers causing the problem cause it's Moved to my desktop but any way to get around it?
I was wondering... If I move my video, music, my documents folders etc. from my boot drive (ie C drive) to say a storage drive (D Drive), is the data completely removed from the boot drive or is it still there waiting to be erased next time a new file is written to it?
What to do with my Imac 27" that goes suddenly black when using windows 7 enterprise, but computer still seems to be working, I can hear audio and the hard drive is still moving. Is it hardware or software problem? Sometimes it happens frequently, others does not happen at all.
I am doing a motherboard upgrade for a friend. I need to know how I can move his hard drive with his current OS instal to the new motherboard without having to do a fresh Windows 7 install. He has too much that cannot be replaced. Is there a way to do this?
I have a Lenovo T400 with a 500gb hard drive( with all my software and files) running win 7. I bought a Lenovo T410 with a 750gb Hard drive, running win 7, and nothing else in it. I want to put everything from the T400 hard drive on to the T410 hard drive. How can I do this?
My operating system is giving out, i am locking up regularly now, i feel i have too many things installed on a vary small drive to pinpoint the problem. i have been neeeding a second hard drive for a while now, i think its time.The question is, how can i boot off of one hard drive, but install all my applications on the other, as if i where booting my OS off of a 30gb ssd, just big enough for the operating system, but actually installing things on my second hard drive.
Recently, my ancient desktop died on me. I had some stuff stored on the main C drive (40 GB) and some on an external 1 TB drive. I put the 40 GB HD in the external module to upload it to a laptop with a 360 GB HD. I would then like to transfer that 40 GB to the 1 TB drive. When I plug in the external with the 40 GB, it appears that the Windows 7 machine does not read it or pick it up. It recognizes it as an external device, but not as a drive.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
I've bought a Toshiba STOR.E D10 Zwart 1,5TB so that I can use e-SATA to connect it to my laptop. I've got a HP Probook 6555b with Windows 7 64bits. When I use the USB connection (this hard disk has both USB an eSATA) all works fine, no problem at all. When I connect it with the eSATA cable I can find the external hard disc and brwose through the files that are on it. However when I try to move files from my laptop onto the hard disk (or the other way around) after about 10 seconds it slows down and stops half way copying. Next Windows Explorer is not responding.
I have a server (HP Proliant ML350 G5) that has a hard disk with Windows 7 Enterprise and Ubuntu (I'll talk about that on UbuntuForums, though). I recently acquired a Dell Dimension 9150. I moved the hard disk from the server to the Dell. Now Windows won't boot. It gets as far as the OS selection. I select Windows 7 from the OS choices. I don't even get the Starting Windows screen. If I try Safe Mode, I get the driver loading screen, but nothing more than that. When I try Startup Repair, it hangs at "Loading Windows Files".I cannot re-install windows because of programs and admin tools found on that hard disk.
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
Found these instructions on net but I got lost at #7: Quote: The My Documents folder is part of Windows 7's new Documents Library. A library combines multiple folders that contain similar types of files.
To move your documents to the D drive:
1. Create a new documents folder on the D drive.
2. Right-click the new folder and click Include in Library > Documents .
3. Click Start > Documents .
4. Double-click My Documents to show its contents.
5. Drag and drop the files to the new folder.
6. Press F5 to refresh the view.
7. Under Documents Library , click locations .
8. Right-click the new folder and click Set as default save location .
9. [Optional] Click My Documents and click Remove . move the My Documents folder to another drive - Microsoft Community Where is Documents Library > locations?
I got a new 1.5TB HDD and 16gb SSD. I installed Win 7 on the SSD and formatted the the new HDD. My main issue is the SSD is running out of memory abnormally quickly. I find myself running CCleaner every 30 mins... I don't know where the memory is coming from.... Windows takes up 12gb so that leaves me 4gb. I'd like to transfer any major folders like My Documents, etc so I can leave my drive at 12gb and everything else go on my completely empty 1.5tb drive.
My Dell Optiplex 740 (AMD) is dying, and my company's IT has given me a Optiplex 745 (Intel) as a replacement.I'm a very lazy person , so naturally, I tried moving the drive with Windows 7 Enterprise x64 to the new machine.It didn't work: * Shortly after boot up, it will restart itself and go into repair mode * It will not be able to repair itself * Starting in Safe Mode also failedAs far as I know, the two PCs are completely different, except the graphic card and hard drives are the same.Is there anyway to "repair" this so it will work on the new machine? I'm avoiding reinstall since I really want to preserve my settings.
I'm wanting to move my copy of Windows 7 OEM Ultimate x64 to a new drive, with all the programs and that without reinstalling. I'm wanting to move it from my WD Black SATA2 drive to a SATA3 drive, which will be done via a PCIe Card. If this isn't possible to do, I'm fine using a fast SATA 2 drive.
I'm wondering if copying all the required folders Windows needs, putting them on a same-sized drive, unplugging the WD Black and doing a boot with that in the same SATA port.
I recently purchased a 7200 rpm WD SATA drive and would like to migrate my Win 7 drive from a slower 5200 rpm Seagate SATA.Can I do this without reinstalling Windows?f I can migrate from one to the other, will there be any problems with validation?
I have a question (and I'm not quite sure where it should go in the forums):I'm going to buy a 90gb SSD to include in my current pc build and my intention is to use it as a primary boot drive. The problem is (as you may guess) that I already have installed windows 7 32bit on my HDD.Is there anyway to "move" the boot drive without having to reinstall and/or delete everything I currently have (estimated 200gb of data)????
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
