Windows Only Boots Into Startup Repair
Oct 17, 2012Windows will only boot into startup repair no matter what. The issue is startup repair was unable to fix the problem. [code]
View 3 Replies
ADVERTISEMENT
Windows 7 Boots Into Startup Repair After Moving Partition
Aug 28, 2012My Windows 7 now refuses to boot properly and now only boots into startup repair. This started happening after I shrunk and moved the /dev/sda2 partition (on my computer, the C: drive), so I could install Ubuntu. I did notice that Windows failed to boot but I was stupid and didn't fix as soon as I realized. I installed Ubuntu (and with it, Grub) and now Windows just boots into Startup Repair which just says it can't do anything and then displays some HP software that gives me a few options (none of which has helped). It may be important to note that I have the option to go to the command prompt.
I have tried all the fixes I have found on the internet (such as the various bootrec.exe commands) to no avail and am becoming desperate!
Windows 7 Computer Shuts Down And Boots Into Startup Repair
Sep 8, 2011Windows 7 home premium
Dell Studio XPS 1645
I7 1.73 GHZ
6 GB DDR3
500 GB Toshiba
I have had this computer for just over a year and it has ran like a top. I was surfing the internet last night when it just shuts off (no slow down no blue screen) and boots into startup repair. It would not repair, just sat in there forever and would not boot into safe mode or anything. It just kept booting into startup repair for hours.
So I hit esc when it booted to startup repair, I go to the dell backup and restore, save my work documents and pics and let it boot to factory fresh windows install from the dell created partition. Windows reinstalls and loads fine, boots in and begins to update successfully and then reboots back into repair. This happens everytime it reboots. After sometime it will boot into windows fine. If I restart I am back into startup repair for half an hour or more.
System Immediately Boots To Startup Repair - No Access To F8
Jan 4, 2013So lately my computer's firewall has decided to not work so I searched around and eventually concluded on doing a upgrade reinstall. As I didn't want to lose any of my files, drivers or programs. All seemed like it went well until the computer rebooted for the last time before it reaches the " Setting up for first use " dialog Though before this was able to happen the computer went into a reboot loop with bsod 0x0000001E
After a large amount of reluctant clicking The computer NOW only boots to the System Recovery Options window and the ONLY option is Startup Repair ; There is NO command prompt no diagnostics, nothing, Just Startup Repair, in which start up repair is unable to do anything and continues to loop itself with a Don't send dialog
I have tried inserting the installation disk and accessing the Repair Computer but it presents an incompatibility error.
I have no F8 menu at all, (no safe mode, which I can't access anyway because the computer can't set up for first use).
Windows 7 Startup Repair On Every Boot But After Startup Repair Hibernate Works?
Dec 14, 2012windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies View RelatedWindows 7 Only Boots Every Other Startup?
Jun 29, 2012I have had a strange problem.Windows 7 only boots up every other boot. In between the computer hangs at the Advent screen.I have been into MSconfig and in start up disabled all and in Services, again disabled all and hidden Microsoft.It now starts up ok but will I have caused other issues by disabling all and hiding Microsoft?
View 8 Replies View RelatedStartup Repair - Windows Cannot Repair This Computer Automatically
May 11, 2011I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies View RelatedWindows 7 Randomly Crashes On Startup Or Requires System Repair On Startup
Jan 14, 2011Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies View RelatedWindows 7 Won't Startup Properly - Stuck In Startup Repair Loop
Feb 18, 2012I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
Startup Repair Cant Repair Computer Automatically?
Oct 5, 2012I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies View RelatedStartup Repair Cannot Repair Computer Automatically?
Mar 24, 2012On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies View RelatedStartup Repair Cannot Repair This Computer Automatically
Jul 31, 2010Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies View RelatedStartup Repair Cannot Repair This Computer Automatically?
Mar 10, 2011I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies View RelatedStartup Repair Could Not Repair This Computer Automatically
Jul 24, 2012i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies View RelatedWindows 7 Nor Windows 7 Repair Disc Will Not Boot, Keep Getting 'startup Repair'
Feb 3, 2012I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
View 9 Replies View RelatedWindows Won't Startup, Startup Repair Can't Fix It
Aug 17, 2010I hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky.
I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
Windows 7 Startup Repair Will Not Go Away?
May 18, 2011Whilst looking for a keygen for Microsoft Office 2010, I must have got a bad file.. yay. When I clicked on the app, my computer immediately went to the Startup Repair window and has been relentless. I've tried opening in SafeMode thru F8 for a system restore, no good. And attempted to start windows normally through F12.
Finally, the Startup mode is over and I'm attempting to turn it back on ... and we're right back into Startup Repair.
Startup Unsuccesful, Startup Repair-no Fix?
Jul 30, 2012the Startup screen. So I went to the Startup repair tool as was recommended, but after few tries nothing has changed. So I tried to recover to previous recovery point, but also nothing. Then I tried booting to Safe mode, and I saw that during the loading process there was no file shown as succesfully loaded. I might also know what could be the cause of this problem, because yesterday when I was shutting Win down, there was a blackout so obviusly some files are corrupted.
View 3 Replies View RelatedWindows 7 Startup Repair Fail
Aug 13, 2011Usually I can resolve most issues myself but this one appears to have stumped me so I am graciously turning to you in my time of need.I am unable to boot Windows 7 on my Acer Ferrari One F0200 netbook. It has Windows 7 home premium 64-bit installed but due to an unknown problem or possibly persistent virus I have been unable to boot into windows.
below is a list of things i've tried up til now:
Tried to boot in all safe mode options (failed)
Tried to boot from last known good configuration(failed)
Tried to system restore from all available restore points (failed)
Tried multiple Startup Repairs(all failed)
"Startup Repair cannot repair this computer automatically"
Problem signature:
Problem event name: StartupRepairOffline
Problem signature 01 : 6.1.7600.16385
Problem signature 02 : 6.1.7600.16385
Problem signature 03 : unknown
[code]....
while writing this I managed to get a blue screen message(disabled the option to automatically restart on system failure) which had been flashing for a nano second previously.A problem has been detected and Windows has been shut down to prevent damage to your computer. it says to check for viruses on your computer remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run chkdsk /f to check for hard drive corruption, and then restart your computer.I had already ran the chkdsk /f before I saw this message and no files were corrupted/no bad sectors. So this is where I'm at, at my wits end hoping that I dont lose all my data.
Can't Boot Into Windows / Startup Repair Can't Fix
Jun 4, 2012I've been having trouble trying to get my computer to boot; I'd noticed a drop in performance (still unsure why) so decided to boot up in safe mode and poke around - it was not my original intention to install AC 5.3.0 but somehow it happened. I ran the 'deep-care' utility and everything was working fine, my computer rebooted and performed a disk check: there weren't any errors that I can remember apart from [something along the lines of] 60 reparse files. Following this my computer restarted and Windows failed to load, restarting to show me startup repair - this isn't the first time this has happened, a similar thing occurred following previous attempts at boosting speed, though before I was able to get Windows up and running using an Ubuntu installation disk... still don't understand why - no need to say that it didn't work this time. Startup repair refuses to work and my system restore points have vanished; I would try doing a repair install if I had a copy of the disk. I built the computer myself a few months back, borrowing a Windows 7 installation disk from a friend (who has now conveniently lost said disk), startup repair does tell me something about 'Problem Signatures'. [code]
View 2 Replies View RelatedWindows 7 Stuck In Startup Repair?
Feb 22, 2012I am having a problem with windows 7, when i start the computer it says loading files and then goes directly to startup repair. I cant even get into the computer in safe mode or anything else by pressing f8 when istartup. It just keeps on this startup repair loop.Its states startup repair checking for problems, it attempts repairs but then it says it cant repair this computer automatically. I have tried system restore, sytem image recovery and tried to restore the computer to its factory state. when i try that i get a error 0x4001001300001002. I didnt get any recovery disks when i bought the computer either.
View 12 Replies View RelatedWindows 7 Will Not Load/Startup Repair Cannot Fix?
Mar 15, 2012I have a Sony Viao with Win 7 Home Premium and I just deleted some form of Trojan with MS Security Essentials and then I ran windows updates before I restarted the machine. Windows update installed some security updates along with Service pack 1 and IE9. Now the computer will not load Windows. It goes straight to the startup repair but cannot fix the problem. There is not restore points other that when SP1 was installed and I gives an error every time I try to restore it. I can get to a command prompt and I have tried to run sfc /scannow but it tells me there is a system repair pending which requires a reboot and then does nothing. I also tried check disk(just as a last chance) but that didn't do anything.
View 2 Replies View RelatedWindows 7 Startup & Repair Loop?
Nov 7, 2012I get the following on boot up Launch startup repair (recommended)start windows normally Selecting either options causes it to enter an infinite loop The last thing I did while it was working was to install a HP printer, it then said restart and since then I have not been able to get pass the Launch startup repair (recommended)start windows normally stage I have tried all the options under F8 on boot, but happy to try any suggestions as I could be completely wrong or may have overlooked something.PS I have read the threads on this forum but can not seem to get it started using the suggestions.
View 2 Replies View RelatedLaunch Windows 7 Startup Repair
Oct 18, 2010Everytime i turn my computer on it launches into startup repair (recommended) Windows laoding files Starup repair is checking your system for problems do you want to restore your computer using system restore
View 3 Replies View RelatedWindows 7 64bit Startup Repair
Jun 2, 2012As of yesterday whenever I start the computer, it says "Windows Error Recovery - Windows failed to start. A recent hardware or software change might be the cause. If windows files have been damaged or configured incorrectly, startup repair can help diagnose and fix the problem. If power was interrupted during startup, choose start windows normally."it then gives me two choices: Launch Startup Repair (Recommended) or Start Windows Normally.When I launch startup repair im left with a black screen with no cursor. Ive tried just leaving it alone but after 5hours it stayed the same so I just gave up and just turned it off.When I start windows normally it tries to load up windows but after a few seconds Im brought back to the first screen with the same two choices.I have also tried running safe mode and last known good configuration. Both of them lead me back to the first screen with the two choices.
View 6 Replies View RelatedWindows 7 Startup Repair Hangs?
Jun 16, 2012I have an Acer AX1301, and when it boots, the startup repair screen comes up.The startup repair loads files, and then, sometimes, I can select input, but then it just hangs on the blue splash screen with the bird.I have left it for up to 24 hours, but it never goes to the next step.Safe mode doesn't work, and I have tried doing the repair from a Windows 7 recovery disk. No good. The first time I used the disc, it got to the point where it was searching for Windows, but seemed to hang on that.Also, if I press Alt+F10, I can get to the Acer recovery, which has 2 options, one which will completely re-install everything and clear the drive, and another that will retain user data. If I do the user data one, what will I lose on the drive? I have my files backed up, but will I have to re-install my various programs and preferences, email settings, etc., or will all of that be retained?
View 5 Replies View RelatedCannot Get Past Windows 7 Startup Repair
Jul 12, 2012So earlier on, my laptop wouldn't respond so I shut it down. When I went to turn it off again it came to a screen saying "Windows failed to start up, a recent hardware or software change might be the cause". There is two options: Start Windows Normally, or Launch Start up repair, which is recommended. When I click on Start Windows Normally, it loads for about 20 minutes then restarts itself and lands back at the windows failed to start up page. When I click on Launch Startup Repair, it says "Loading windows files" and loads for a few minutes before showing the windows loading symbol, and then it goes to a black page with a cursor pointer on it. I can move the cursor about, but no matter how long I wait, it doesn't do anything. There is no F8 option ever when I start up my laptop, even when it was working. I am using windows 7.
View 1 Replies View RelatedWindows 7 Will Not Restart Without Startup Repair
Jul 31, 2012Working on a Dell Inspiron laptop running Windows 7 Home...
Within last week I have been having trouble with Windows 7 restarting. Originally noticed when the computer goes into sleep mode. When I try to resume windows it defaults to the startup repair tool. Usually this will run 20-30 mins and system will restore. It is happening regularly.
If I power down during the startup repair and do a hard reset, the computer will give me the option to start normally. When I select this the computer will continue and startup without issue.
If I shut down normally and restart the same result has also been occurring.
System runs fine once booted. Only other symptom I noticed is the clock time shown in the tray is consistently wrong now.
Windows 7 Will Not Start...startup Repair Does Nothing
Sep 3, 2012I have a Toshiba Satellite that started freezing up after some windows updates. It would run fine in safe mode but now it gets stuck on the windows startup screen. If I choose startup repair it just keeps searching. I had tried to restore when in safe mode but the computer old me it. Could not find restore point. I have been trying to backup files that I needed before doing a factory restore but now I am lost...
View 3 Replies View RelatedWindows 7 Startup Repair Loop
Jan 3, 2013It started about a year ago, i just left it but now i feel the need to try and fix it. I have gone through Startup Repair Infinite Loop Recovery but it was no helpful.
View 5 Replies View RelatedCant Start Windows 7 Up Nor Do Startup Repair?
Jul 29, 2011K I have a serious issue right now.. I just put in a new mobo and cpu into my pc...My pc was running oem windows before the upgrade now i cant start windows up nor do startup repair... (im on my laptop) so my main concern is how am i going to get my pc up and running with little to no pain.
View 6 Replies View Related
