I have an Acer AX1301, and when it boots, the startup repair screen comes up.The startup repair loads files, and then, sometimes, I can select input, but then it just hangs on the blue splash screen with the bird.I have left it for up to 24 hours, but it never goes to the next step.Safe mode doesn't work, and I have tried doing the repair from a Windows 7 recovery disk. No good. The first time I used the disc, it got to the point where it was searching for Windows, but seemed to hang on that.Also, if I press Alt+F10, I can get to the Acer recovery, which has 2 options, one which will completely re-install everything and clear the drive, and another that will retain user data. If I do the user data one, what will I lose on the drive? I have my files backed up, but will I have to re-install my various programs and preferences, email settings, etc., or will all of that be retained?
I have an Acer AX1301, and when it boots, the startup repair screen comes up. The startup repair loads files, and then, sometimes, I can select input, but then it just hangs on the blue splash screen with the bird.I have left it for up to 24 hours, but it never goes to the next step.Safe mode doesn't work, and I have tried doing the repair from a Windows 7 recovery disc. No good. The first time I used the disc, it got to the point where it was searching for Windows, but seemed to hang on that.Also, if I press Alt+F10, I can get to the Acer recovery, which has 2 options, one which will completely re-install everything and clear the drive, and another that will retain user data. If I do the user data one, what will I lose on the drive? I have my files backed up, but will I have to re-install my various programs and preferences, email settings, etc., or will al
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
I cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
Start up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
I have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
i use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
I have a Toshiba Satellite C655-S5132 that just shut down & now will not boot Windows 7. Just goes to black screen w/blinking cursor then goes to 'startup repair' (which I'm postiive this is a virus of somekind) & will not allow me to do anything. Just repeats itself. I downloaded Windows 7 repair to a CD-R, chgd BIOS settings to CD/DVD to boot first, saved changes, and will NOT pull/boot up from disc. I've tried 2diff repair discs, both do not work. 'F8' does not do anything for me, not able to get to 'safe mode'. Computer is only 2yrs old.
It hangs on start up; it gets past the Bios but stays at the Windows Logo and says "Loading Windows" until I am forced to shut down. Here are my specs:
EVGA 780i mobo 3.0ghz intel duo-core processor 4 gigs of DDR2 RAM 1 TB seagate HDD 1 gig of video (Gforce 9800GT 512mb SLI)
So my computer was working perfectly fine until this happened. However, this has happened before! This same exact problem happened before, so I figured it was the hard drive so I got a new one(the one I have now).Fine, it worked for about 1 month. Then this happened... again. I do not know what the problem is. Like I said in the description if my computer does get past the windows logo and I log on, after about 10 minutes of running I freeze and have to force shut down. Then I am stuck back at the Windows Logo... I have also tried to insert the Windows CD itself and try to repair windows, but even then it still won't get past the windows logo.
A friend asked me to take a look at her laptop. It's a Toshiba Satellite L775 with Windows 7 Home Premium. The computer starts fine until the green progress bar finishes loading. After that, a cursor appears and can be moved, but nothing else loads. F2 loads BIOS during startup, F12 loads a boot menu, and every other F key (other than F8) loads an OS selection screen. F8 does nothing. I've also tried booting from a restoration disc. The pixelized progress bar loads (slowly, as is usual when booting from a disc) but then the normal boot process continues with the same problem as before. I can't even get into Safe Mode to try and troubleshoot anything.
I hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky. I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
I have installed Windows 7 Ultimate on it - the OS is installed on a 64GB Kingston SSD drive. When I boot up the PC it sits at the "Starting Windows..." screen it will stay that way for probably 2 minute then you'll see the colored orbs come in and then Windows loads no problem.Putting the OS on a SSD i figured it should be incredibly fast - I mean I have Ultimate put on several other computers with HDD's and it loads faster.I'm using an ATI Radeon HD 5460 (i think thats the model) with drivers that have been fully updated. That is the only expansion slot being used.
I recently did a clean install from Windows XP to Windows 7 64 bit on my computer. Setup works just fine and installs correctly. After setup is finished windows tries to startup but it hangs after the starting windows screen.
My specks are (custom computer I bought from friend) Asus A8N SLI motherboard AMD Athlon 64 X2 Dual 3800+ OCZ PC 3200 400 MHZ 1024 MB Dual channel (x2) memory Zotac nvidia GeForce 210 graphics card
i just did fresh installation of windows 7 on my mother in laws computer and for some reason when the computer is turned on or needs to restart the computer hangs where it is supposed to be reading from cd drive, i see all lights working but it will not load to windows. if i press f8 to enter boot menu and select the hard drive it starts with out a problem.
I have an HP laptop with Win 7 Home Premium. When I boot with my new Wacom Intuos3 tablet plugged in (USB), the system hangs after the Windows logo loads. (Dark blue screen). I have to do a hard reset to get the computer to restart. Windows boots fine with the tablet UNPLUGGED. The tablet works if plugged in AFTER Windows is loaded. I have tried all the available drivers for this tablet. Changing the drivers didn't affect the function of the tablet or eliminate the hangup at boot. Wacom says the issue is not with their driver, but with how Windows is loading the services. I have turned off "tablet pc input" in Services; "Wacom tablet service" is turned on. (Wacom tech didn't think these services conflicted but some had posted the suggestion to turn windows tablet pc service off.) Although I can use my tablet, it's a real pain to have to unplug at each reboot.
I've recently upgraded my computer with an ASUS P6P67 Pro, Intel i5 2500K, Corsair Vengeance 8GB and Corsair TX650 The operating system is Windows 7 Ultimate 64-bit.The installation of hardware went fine, I used my WD Raptor 64GB as system drive and connected my 2 other drives.Maxtor 250GB and Samsung Spinpoint 750GB. (they will be replaced eventually)The installation of Windows 7 also went fine, no problems at all. When it was installed I could see all harddrives and I could browse them. But after I installed the drivers from the DVD from Asus and restarted the computer it hangs at the Windows logo waving. It just keeps waving for hours.When I disconnect the Maxtor and Samsung drive, it boot up correctly. I've only tried to connect them to the Intel SATA Controller. I tried to switch between the connectors but it didn't boot up.When the drives where disconnected I could resume the configuration of Win 7 and I ran Windows Update to install SP1 but still the same problem when i tried too connect the drives?I reinstalled 2-3 more times, but no. Then I changed in BIOS from ACHI to IDE on the Intel SATA Controller and reinstalled again and now it works?I updated everything in Windows and restarted it several times and it boot up every time. But I wish to use ACHI, since I'm planning to run RAID 0 I've used the latest chipset drivers from Intel and IRST as well.I need to clarify that the problem begins after the installation of chipset drivers.
my windows7 x64 will not boot completely. I get the welcome screen, with a continuous whirling circle or, sometimes, i get to the desktop, but no icons or task bar. I can't get any response from control/alt/delete to get to task manager. I have easy access to safe mode, and everything there seems normal. I have run AVAST, Malwarebytes, and a couple of other antivirus programs from safe mode, with no virus or malware identified. I have read every post in as many tech sites as I can find, and nothing seems to work. I have already tried going back to earlier restores, and am out of them.
I need to backup all my work files and reinstall Windows 7, I guess. I'm concerned that I will not have the drivers I need when I do that. I have a backup Macrium system image, but it's a year old, the external drive it's on clicks like crazy, indicating it's going bad, and I've got a LOT of work on my machine I don't want to lose. I've already beaten myself severly with a rubber hose for putting off backups and restore disks, so save that...
win 7 hangs on startup and freezes or BSOD 0x000000d1 within 1 minute usually. system runs fine if I boot to safe mode.no serious hardware or software changes around the time it started happening (that i recall) I didn't use my pc much for a few days and then the first time i noticed (around June 7th, 2012) I just logged in and there was a popup saying something like windows had recovered from an unexpected shutdown and the system was really slow and then it froze. Makes me think maybe a power outage corrupted something (i'm not on a UPS) or a windows update went badly. i tried to update several drivers in safe mode but none were succesfull. Catalyst Install Manager says: "Failed to load detection driver"sfc /scannow reported no violations perfmon /report gives me...."Error: An error occured while attempting to generate the report. The system cannot find the path specified. "My oldest system restore point says June 7th, 2012 so i did restore but it still has the problem.I built the system 1-2 years ago and haven't re-installed the OS since.
specs Manufacturer: Myself OS: Windows 7 Ultimate x64 CPU: AMD Athlon(tm) II X4 635 2.91Ghz Motherboard: ASUS M4A88TD-V EVO/USB3 Memory: G Skill 2GB X2 (4GB) Graphics Card(s): Two ATI RADEON HD 5700's in Crossfire Sound Card: ASUS M4A88TD-V OnBoard sound Hard Drives: One 100GB Seagate Barracuda ST3100011A on ATA with Windows 7 Two 1TB Western Digital WD10evds-63u8b0's on SATA in RAID1 for storage PSU: Corsair 850w Cooling: ?? cpu at 55 celcius at Idle Keyboard: Microsoft Wireless MultiMedia Keyboard Mouse: Microsoft USB Optical mouse Internet Speed: 18 mb/s
Whilst looking for a keygen for Microsoft Office 2010, I must have got a bad file.. yay. When I clicked on the app, my computer immediately went to the Startup Repair window and has been relentless. I've tried opening in SafeMode thru F8 for a system restore, no good. And attempted to start windows normally through F12.
Finally, the Startup mode is over and I'm attempting to turn it back on ... and we're right back into Startup Repair.
the Startup screen. So I went to the Startup repair tool as was recommended, but after few tries nothing has changed. So I tried to recover to previous recovery point, but also nothing. Then I tried booting to Safe mode, and I saw that during the loading process there was no file shown as succesfully loaded. I might also know what could be the cause of this problem, because yesterday when I was shutting Win down, there was a blackout so obviusly some files are corrupted.
Usually I can resolve most issues myself but this one appears to have stumped me so I am graciously turning to you in my time of need.I am unable to boot Windows 7 on my Acer Ferrari One F0200 netbook. It has Windows 7 home premium 64-bit installed but due to an unknown problem or possibly persistent virus I have been unable to boot into windows.
below is a list of things i've tried up til now:
Tried to boot in all safe mode options (failed) Tried to boot from last known good configuration(failed) Tried to system restore from all available restore points (failed) Tried multiple Startup Repairs(all failed)
"Startup Repair cannot repair this computer automatically"
Problem signature: Problem event name: StartupRepairOffline Problem signature 01 : 6.1.7600.16385 Problem signature 02 : 6.1.7600.16385 Problem signature 03 : unknown
[code]....
while writing this I managed to get a blue screen message(disabled the option to automatically restart on system failure) which had been flashing for a nano second previously.A problem has been detected and Windows has been shut down to prevent damage to your computer. it says to check for viruses on your computer remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. Run chkdsk /f to check for hard drive corruption, and then restart your computer.I had already ran the chkdsk /f before I saw this message and no files were corrupted/no bad sectors. So this is where I'm at, at my wits end hoping that I dont lose all my data.
I've been having trouble trying to get my computer to boot; I'd noticed a drop in performance (still unsure why) so decided to boot up in safe mode and poke around - it was not my original intention to install AC 5.3.0 but somehow it happened. I ran the 'deep-care' utility and everything was working fine, my computer rebooted and performed a disk check: there weren't any errors that I can remember apart from [something along the lines of] 60 reparse files. Following this my computer restarted and Windows failed to load, restarting to show me startup repair - this isn't the first time this has happened, a similar thing occurred following previous attempts at boosting speed, though before I was able to get Windows up and running using an Ubuntu installation disk... still don't understand why - no need to say that it didn't work this time. Startup repair refuses to work and my system restore points have vanished; I would try doing a repair install if I had a copy of the disk. I built the computer myself a few months back, borrowing a Windows 7 installation disk from a friend (who has now conveniently lost said disk), startup repair does tell me something about 'Problem Signatures'. [code]
I am having a problem with windows 7, when i start the computer it says loading files and then goes directly to startup repair. I cant even get into the computer in safe mode or anything else by pressing f8 when istartup. It just keeps on this startup repair loop.Its states startup repair checking for problems, it attempts repairs but then it says it cant repair this computer automatically. I have tried system restore, sytem image recovery and tried to restore the computer to its factory state. when i try that i get a error 0x4001001300001002. I didnt get any recovery disks when i bought the computer either.
I have a Sony Viao with Win 7 Home Premium and I just deleted some form of Trojan with MS Security Essentials and then I ran windows updates before I restarted the machine. Windows update installed some security updates along with Service pack 1 and IE9. Now the computer will not load Windows. It goes straight to the startup repair but cannot fix the problem. There is not restore points other that when SP1 was installed and I gives an error every time I try to restore it. I can get to a command prompt and I have tried to run sfc /scannow but it tells me there is a system repair pending which requires a reboot and then does nothing. I also tried check disk(just as a last chance) but that didn't do anything.
I get the following on boot up Launch startup repair (recommended)start windows normally Selecting either options causes it to enter an infinite loop The last thing I did while it was working was to install a HP printer, it then said restart and since then I have not been able to get pass the Launch startup repair (recommended)start windows normally stage I have tried all the options under F8 on boot, but happy to try any suggestions as I could be completely wrong or may have overlooked something.PS I have read the threads on this forum but can not seem to get it started using the suggestions.
