Windows 7 Hangs On Startup And Freezes Or BSOD 0x000000d1 Within 1 Minute
Jun 11, 2012
win 7 hangs on startup and freezes or BSOD 0x000000d1 within 1 minute usually. system runs fine if I boot to safe mode.no serious hardware or software changes around the time it started happening (that i recall) I didn't use my pc much for a few days and then the first time i noticed (around June 7th, 2012) I just logged in and there was a popup saying something like windows had recovered from an unexpected shutdown and the system was really slow and then it froze. Makes me think maybe a power outage corrupted something (i'm not on a UPS) or a windows update went badly. i tried to update several drivers in safe mode but none were succesfull. Catalyst Install Manager says: "Failed to load detection driver"sfc /scannow reported no violations perfmon /report gives me...."Error: An error occured while attempting to generate the report. The system cannot find the path specified. "My oldest system restore point says June 7th, 2012 so i did restore but it still has the problem.I built the system 1-2 years ago and haven't re-installed the OS since.
specs
Manufacturer: Myself
OS: Windows 7 Ultimate x64
CPU: AMD Athlon(tm) II X4 635 2.91Ghz
Motherboard: ASUS M4A88TD-V EVO/USB3
Memory: G Skill 2GB X2 (4GB)
Graphics Card(s):
Two ATI RADEON HD 5700's in Crossfire
Sound Card: ASUS M4A88TD-V OnBoard sound
Hard Drives:
One 100GB Seagate Barracuda ST3100011A on ATA with Windows 7
Two 1TB Western Digital WD10evds-63u8b0's on SATA in RAID1 for storage
PSU: Corsair 850w
Cooling: ?? cpu at 55 celcius at Idle
Keyboard: Microsoft Wireless MultiMedia Keyboard
Mouse: Microsoft USB Optical mouse
Internet Speed: 18 mb/s
View 3 Replies
ADVERTISEMENT
Jun 8, 2012
I just did some upgrades to my pc. Here are the current specs:
Motherboard: Crosshair V
CPU: AMD FX 6100
GPU: eVGA GTX 680 HC
RAM: 4x4GB Ballistix Tactical Tracer
PSU: Corsair 750Watt
OS: Windows 7 x64 Clean Install
HD: WDC-WD2500KS-00MJB0
Like it says above, this is a clean install. I have tested the RAM with Memtest86+ for 8 hours and found no errors. I have tested the HD with Seatools and found no errors. I have run Prime95 for hours without errors. I water cool my CPU and GPU and temps max at 37C.The OS constantly hangs, freezes, or whatever its called NONSTOP. Most of the time I'm able to move the mouse but can't DO anything with it. Eventually (within minutes) it comes back to life and does everything I'd been trying to do while it was frozen. I don't get much time inbetween freezes (a minute max between freezes). I've reinstalled the OS several times and no joy. At first I thought it was a bad motherboard, so I RMA'd it and it is still having the same issue. These freezes began happening well before video drivers were even installed (or any other drivers for that matter). It even does the same thing in SAFE MODE.from the EVENT VIEWER:
In the last hour: 19 Service Control Manager Error 7001
In the last hour: 44 amd_sata Warning 129 (this one always comes in pairs and always 30 seconds apart)
In the last hour: 169 Service Control Manager Information 7036
View 9 Replies
View Related
Apr 8, 2011
After i installed my HD6970 and formatted my computer, I have been experiencing something quite frustrating about my boot.
When I boot up my computer, it hangs for over 1 minute at this screen: [URL]
I have been trying to find software for boot logging but it has been useless. My Windows bootlog looked like this: Code: Microsoft (R) Windows (R) Version 6.1 (Build 7600)
4 8 2011 05:30:31.125
Loaded driver SystemRootsystem32
toskrnl.exe
[Code].....
View 9 Replies
View Related
Jan 28, 2013
I have an ssd and my windows usually boots really fast, like around 15 seconds. Recently though, I've encountered a problem where after the glowing windows icon and before the login screen I get a black screen for about 1-2 minutes. I have no idea what might be causing this and I want to fully experience my SSD's capabilities. I miss being able to reboot in a matter of seconds instead of minutes. My SSD is doing great, it doesn't seem to be failing at all, still super fast after the boot. I've tried googling it but its kind of a catch all and most things I find are windows hanging indefinitely during boot.
View 7 Replies
View Related
Nov 17, 2012
I am getting BSOD everytime I boot up the computer. It will say configuring windows then crash to BSOD and say dumping physical memory. Code error is 0x000000d1. It says that Ndis.sys is involved. Top of the BSOD it says Driver_IRQL_NOT_LESS_OR_EQUAL or something. it just continues this cycle of trying to boot up followed by crashing.
I can boot up in safe mode, but not safe mode with networking. So I'm not sure how to download the latest drivers without an internet connection.
I am running Windows 7 service pack 1 on a Dell inspiron 546. I have tried booting in safe mode and running msconfig to only boot up microsoft programs, and i've disabled Mcafee security and firewall.
View 1 Replies
View Related
Jun 23, 2012
I built my pc about a year ago. I had no problems with it up until like a week ago when I started to get random bsod there mostly do to with ntoskrnl.exe., not that good with these types of issues. I actually reinstalled windows by doing a fresh install but I installed many of the same programs again so i don't know what is causing the issue.
View 3 Replies
View Related
Sep 6, 2012
I keep getting a bluescreen like every half hour, i don't know what's wrong. i teared apart my pc a few times but i can't seem to find out what's the problem.
There are a few files in the minidump that i think may cause the problem, those are:
ntoskrnl.exe (first BSOD)
-------------------------
ntoskrnl.exe
fltmgr.sys
fileinfo.sys (second BSOD
-------------------------
ntoskrnl.exe
halmacpi.dll
usbehci.sys
USBPORT.sys (third BSOD
-------------------------
I had this problem first when I had Windows XP, so I thought that installing a fresh Windows 7 may fix this problem.
View 8 Replies
View Related
May 28, 2012
I have been recieving various BSOD over the past few days. The original BSOD error 0x000000d1 which I was getting never showed up in the minidump file. Recently I have been getting the 0x0000003B BSOD which I have attached in the minidump.
View 3 Replies
View Related
Apr 4, 2012
I'm using home premium when I enter my password I press enter nothing happens it freezes then welcome screen loads for a minute this just started last week.
View 3 Replies
View Related
Aug 12, 2012
This is my gf's custom pc she built herself about 6 years ago. I has been used and abused by her siblings. It was having all kinds of problems so she had a friend look at it and clean everything inside. It was still crashing so I reformatted and reloaded the OS, trying to just get a clean start. Although, the issue of crashing has been improved through this, it is not cured.
I get BSOD while playing games, surfing the web, while sitting idle, after coming back from sleep, pretty much anytime. Sometimes I get no BSOD for hours, other times its more constant.
sometimes it says DRIVER_IRQL_NOT_LESS_OR_EQUAL
usually usbport.sys / nvlddmkm.sys
and usually 0x000000D1
View 9 Replies
View Related
Jan 27, 2013
Start computer from sleep, log into Teamspeak 3, open Play with Six and launch ArmA 2 OA ACE mod an play. But today, my computer screen freezed and I couldn't do anything except move my mouse. After doing a hard restart of my computer and getting an error(batch file f:dosmenu. BAT missing) and doing another restart and then I got a BSOD. I can only start my computer in Safe Mode.Im running Windows 7 Home Premium, Alienware M17X laptop.
View 1 Replies
View Related
Jan 8, 2012
bought a dell touchscreen inspiron one 2320, thought it would be better than my two year old dell (don't see it yet). i am an average user and i am not impressed. anyway the question is why does the monitor go black after 1 minute? i have done all the normal stuff in power options. change power saving settings, change when the computer sleeps. choose when to turn off display. turn hibernation on or off. i upload to Internet and it the shutting down makes it frustrating....
View 11 Replies
View Related
Jan 6, 2012
I recently started playing the game Guild Wars again on my Dell XPS 15 Laptop. I played for a little while and then all of a sudden I got the BSOD. I tried to play again and after about an hour the same thing happened. Now anytime I open Guild Wars I get the BSOD.The main line up at the top of the BSOD was DRIVER_IRQL_NOT_LESS_OR_EQUAL.As for my computer/computer history I am on a Dell XPS 15 with an i7-2620M @ 2.7 GHz cpu. I run dual monitors, my laptop monitor and my television that is connected to my laptop by an HDMI cable. My graphics cards are NVIDIA GeForce 540M and the intel graphics card that came with the computer. I can play any game ranging from League of Legends, Call of Duty. Black-Ops, Minecraft, World of Warcraft, Starcraft II,Counterstrike:Source,Team Fortress 2 and so on and not have any problems. It only occurs with Guild Wars. I think it may have to be because Guild Wars is an older game and it may have problems with Windows 7 64-Bit, but I wanted to see if there was something else wrong.All of my drivers are up to date and Guild Wars is ran through the Steam platform and I verified the games cache through Steam.
View 1 Replies
View Related
Mar 3, 2012
Been getting a BSOD playing League of Legends as the title says, here's the dump info.
Dump File: 030312-13665-01.dmp
Crash Time: 3/3/2012 1:20:32 PM
Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code: 0x000000d1
Parameter 1: fffff800`47ea3f5e
[code]...
This doesn't happen everytime, but it's happening enough to irritate me to no end.
View 3 Replies
View Related
Jan 11, 2012
I just finished building my computer the other day and installed Windows 7 Ultimate 64 bit edition. The install went great and the computer is amazingly fast, but I am less than impressed with the boot time. I have windows installed on two Corsair Force GT 60 GB Solid State Drives in RAID 0 configuration. The motherboard is a GIGABYTE G1. Sniper and the processor is an i7 990X. As I said, I am very impressed with the performance once the computer is on, but it takes ages to get there. I had some trouble with it stalling at the "Verifying DMI Pool Data..." for about 30 seconds each boot. That seems to have been fixed when I cleared the board and reconfigured BIOS. The problem I am having now is that when Windows begins to load, it says "Starting Windows" (right before the logo flies in). It will sit at that screen for over a minute before it starts to animate. It only takes about 5 seconds to load after the animation starts. No problems after that. It does change depending on the BIOS settings. It did not always do this. I have been messing with them so much to try to isolate what's causing it but I cannot.
View 3 Replies
View Related
Dec 11, 2012
I get the BSOD while seeding in uTorrent mutliple files. I have a stable notebook, never got an issue for years. Occasionally get some BSOD, but for reasons, now I have BSOD i cant explain for myself. uTorrent can seed for some time, but if I leave it ,i find it with the following BSOD. I doesnt do it right away, after sometime. check screenshot.
View 1 Replies
View Related
Aug 8, 2011
I'm running windows 7 pro 64-bit and whenever my asus U31F goes into hibernate and i try to system resume, it takes over 5 minutes. The screen freezes on just saying system resume for a minute or two, then as the coloured balls that come in to make the windows logo - they come in frame by frame, pausing for ages on each frame.This whole process means i have to hard reset my computer if i need it quickly and is really really starting to annoy me. Is there anything i can do???Note: On further inspection - i've realised that the drive doesn't start spinning while the screen is freezed, and then when it does that's aboutwhen they balls start to come into the screen.
View 4 Replies
View Related
Apr 10, 2012
Had one of the fake viruses on my machine and so I download and ran Malware Bytes it now appears to boot up fine but within a minute or two of being in the Windows screen it goes to a BSOD. I have booted the machine with the MSDART 7 program and have attached the dump file to see what you all think might be going on. not being able to run the utility from this site but it does not give me enough time on boot before it does the BSOD.
Make: Acer
Model: Aspire (5349-2481)
Windows 7 64-bit Home Premium
OEM install..
View 5 Replies
View Related
Feb 17, 2012
I'm having a problem which seems to be network related as that's what I have narrowed it down to through forums ect. and now I need to know how to fix it! I always have good luck here and hoping to continue the trend.Problem: When Windows 7 is booting, it gets to what appears to be the Desktop but no icons are visible, only the solid background and the mouse cursor. It takes about 2 minutes for the loading process to complete from that point after taking only 18 seconds to get there. After trial and error in addition to reading other forums, I came to the conclusion that this is caused by my networked drives that are mapped to the computer. When I unplug them from the network, the entire loading process takes less than 30 seconds!Question: Is there any fix for this like possibly delaying the connection to the networked drives until I manually access them? Seems all the "answers" I found elsewhere result in editing the registry or something similar which I suppose if thats what it takes I'll do it. Just wanted to get a second opinion before I go in changing things that may or may not address the issue.
View 3 Replies
View Related
Mar 7, 2011
I just installed a new ssd (X-25m) on a clients computer along with Windows 7 64bit and 8GB of RAM. The computer hangs for anywhere from 10 seconds to 30 seconds+ and sometimes just freezes up all together until I restart. Sometimes, it freezes icons and I can still use the mouse, and can double click to start a program, but it won't start up until it unfreezes, then everything I've opened suddenly opens all at once. Other times, even the mouse is frozen, and I have to wait 30s to a minute before I get it back.
Things I've tried- all Windows Updates, and updated all chipset drivers for the mobo (MSI P6N SLI Platinum)
View 1 Replies
View Related
Mar 7, 2011
I just installed a new ssd (X-25m) on a clients computer along with Windows 7 64bit and 8GB of RAM. The computer hangs for anywhere from 10 seconds to 30 seconds+ and sometimes just freezes up all together until I restart. Sometimes, it freezes icons and I can still use the mouse, and can double click to start a program, but it won't start up until it unfreezes, then everything I've opened suddenly opens all at once. Other times, even the mouse is frozen, and I have to wait 30s to a minute before I get it back.
Things I've tried- all Windows Updates, and updated all chipset drivers for the mobo (MSI P6N SLI Platinum)
View 5 Replies
View Related
Dec 22, 2011
At various, seemingly random points throughout using the computer, Windows 7 simply freezes or locks up. No BSOD or error code is given, it simply becomes completely unresponsive. The only means I have of shutting down/restarting is to hold the power button and force it to turn off.Using 32 bit Windows 7 Professional Downloaded and clean installed over XP Home a couple weeks ago Computer is an eMachines T3104 with a AMD Sempron 3100+ processor - circa 2005 In an effort to combat old hardware with the new Windows 7 and freezing, I upgraded to 2GB RAM, 430 watt PSU and an AGP 8x video card (Jaton 3DFORCE FX 5200TV) I tried to update the BIOS (currently Phoenix-Award 6.00PG) today. That program hangs up while Windows 7 continued to work. I'd love for it to be fully operational. It is not used for any gaming - online or otherwise. I use it for internet and school work (Microsoft Office, Adobe Acrobat, etc)
View 2 Replies
View Related
Mar 10, 2011
It hangs on start up; it gets past the Bios but stays at the Windows Logo and says "Loading Windows" until I am forced to shut down. Here are my specs:
EVGA 780i mobo
3.0ghz intel duo-core processor
4 gigs of DDR2 RAM
1 TB seagate HDD
1 gig of video (Gforce 9800GT 512mb SLI)
So my computer was working perfectly fine until this happened. However, this has happened before! This same exact problem happened before, so I figured it was the hard drive so I got a new one(the one I have now).Fine, it worked for about 1 month. Then this happened... again. I do not know what the problem is. Like I said in the description if my computer does get past the windows logo and I log on, after about 10 minutes of running I freeze and have to force shut down. Then I am stuck back at the Windows Logo... I have also tried to insert the Windows CD itself and try to repair windows, but even then it still won't get past the windows logo.
View 6 Replies
View Related
Jan 22, 2013
A friend asked me to take a look at her laptop. It's a Toshiba Satellite L775 with Windows 7 Home Premium. The computer starts fine until the green progress bar finishes loading. After that, a cursor appears and can be moved, but nothing else loads. F2 loads BIOS during startup, F12 loads a boot menu, and every other F key (other than F8) loads an OS selection screen. F8 does nothing. I've also tried booting from a restoration disc. The pixelized progress bar loads (slowly, as is usual when booting from a disc) but then the normal boot process continues with the same problem as before. I can't even get into Safe Mode to try and troubleshoot anything.
View 14 Replies
View Related
Sep 27, 2012
Ill try to make this short and simple, i had same pc for around 3 years now, finally managed to ruin my first win 7 instalation by being lazy, that resulting in long needed reinstall, no problem there,But after everything was done, my pc started randomly freezing for around 1-5 mins ( depends, usually around 3 mins ) then it just comes back alive like nothing happened, sometimes video driver crashes My first thought was that my hdd finally dying on me, but after numerous test found nothing wrong on any of them and freezes doesnt always occur on hdd usage i ruled that out, some googling blamed it on new video drivers, got other ones, same, still freezing, reseted my bios to default, still same, sometimes i can turn on a game and play 2 hours straight and nothing will happen, next time i can startup movie and it will freeze 2 times in 5 mins, already reinstalled coddecs and video players i am just running out of ideas here, never had this issue before, using same windows 7, same install, same pc and all of my drivers/programs are same ones i used
View 11 Replies
View Related
Nov 24, 2010
I have installed Windows 7 Ultimate on it - the OS is installed on a 64GB Kingston SSD drive. When I boot up the PC it sits at the "Starting Windows..." screen it will stay that way for probably 2 minute then you'll see the colored orbs come in and then Windows loads no problem.Putting the OS on a SSD i figured it should be incredibly fast - I mean I have Ultimate put on several other computers with HDD's and it loads faster.I'm using an ATI Radeon HD 5460 (i think thats the model) with drivers that have been fully updated. That is the only expansion slot being used.
View 3 Replies
View Related
Jun 16, 2012
I have an Acer AX1301, and when it boots, the startup repair screen comes up.The startup repair loads files, and then, sometimes, I can select input, but then it just hangs on the blue splash screen with the bird.I have left it for up to 24 hours, but it never goes to the next step.Safe mode doesn't work, and I have tried doing the repair from a Windows 7 recovery disk. No good. The first time I used the disc, it got to the point where it was searching for Windows, but seemed to hang on that.Also, if I press Alt+F10, I can get to the Acer recovery, which has 2 options, one which will completely re-install everything and clear the drive, and another that will retain user data. If I do the user data one, what will I lose on the drive? I have my files backed up, but will I have to re-install my various programs and preferences, email settings, etc., or will all of that be retained?
View 5 Replies
View Related
Mar 22, 2011
I recently did a clean install from Windows XP to Windows 7 64 bit on my computer. Setup works just fine and installs correctly. After setup is finished windows tries to startup but it hangs after the starting windows screen.
My specks are (custom computer I bought from friend)
Asus A8N SLI motherboard
AMD Athlon 64 X2 Dual 3800+
OCZ PC 3200 400 MHZ 1024 MB Dual channel (x2) memory
Zotac nvidia GeForce 210 graphics card
View 9 Replies
View Related
Aug 25, 2011
i just did fresh installation of windows 7 on my mother in laws computer and for some reason when the computer is turned on or needs to restart the computer hangs where it is supposed to be reading from cd drive, i see all lights working but it will not load to windows. if i press f8 to enter boot menu and select the hard drive it starts with out a problem.
View 3 Replies
View Related
Jan 6, 2010
After recently building a custom PC, I am doing a clean install of Windows 7 (64 bit) and all goes well through the installation process (loading, expanding files, etc) except when after the 2nd restart when it starts up for the first time. It freezes or hangs on the black “starting windows” screen (the one with the new colored windows logo).
I have tried installation a number of times, including with a bare bones configuration (2 Gb RAM, 1 HDD, 1 DVD Drive, GPU, and all other peripherals disconnected) and still the same thing happens. I have also tried the process using the VGA cable instead of the DVI.
I was able to successfully install XP after failing to install Win7, so I don't think my HDD is bad. I am also using a PS/2 Keyboard
System:
CPU: Intel Core 2 Quad (Q9650) 3Ghz/1333Mhz/12MB
MBoard: Asus P5K-E
GPU: Sapphire HD 2600XT
HDD: 2 x WD 640 Gb 7200/32MB/SATA 3.0Gb/s (Caviar Black WD6401AALS)
RAM: Mushkin 4Gb DDR2 SDRAM (2 x 2Gb)
PSU: Antec NeoPower HE550w (ATX 12v)
OS: Windows 7 Ultimate (64 bit) OEM system builder pack
All components were purchased new from Newegg. I also have some peripherals: 2 DVD drives, Multi card reader, extra USB, firewire ports, wireless LAN card (although I disconnected those for the initial install attempt).
Any help or advice would be greatly appreciated. I am really at a loss to figure this one out. Could it be something to do with my video card driver? (Do I need to install that in the BIOS?)--I can see everything fine on my monitor though.
View 3 Replies
View Related
Sep 2, 2010
I have an HP laptop with Win 7 Home Premium. When I boot with my new Wacom Intuos3 tablet plugged in (USB), the system hangs after the Windows logo loads. (Dark blue screen). I have to do a hard reset to get the computer to restart. Windows boots fine with the tablet UNPLUGGED. The tablet works if plugged in AFTER Windows is loaded. I have tried all the available drivers for this tablet. Changing the drivers didn't affect the function of the tablet or eliminate the hangup at boot. Wacom says the issue is not with their driver, but with how Windows is loading the services. I have turned off "tablet pc input" in Services; "Wacom tablet service" is turned on. (Wacom tech didn't think these services conflicted but some had posted the suggestion to turn windows tablet pc service off.) Although I can use my tablet, it's a real pain to have to unplug at each reboot.
View 9 Replies
View Related
