Connection To Networked Drives Causing 2+minute Delay On Startup?
Feb 17, 2012
I'm having a problem which seems to be network related as that's what I have narrowed it down to through forums ect. and now I need to know how to fix it! I always have good luck here and hoping to continue the trend.Problem: When Windows 7 is booting, it gets to what appears to be the Desktop but no icons are visible, only the solid background and the mouse cursor. It takes about 2 minutes for the loading process to complete from that point after taking only 18 seconds to get there. After trial and error in addition to reading other forums, I came to the conclusion that this is caused by my networked drives that are mapped to the computer. When I unplug them from the network, the entire loading process takes less than 30 seconds!Question: Is there any fix for this like possibly delaying the connection to the networked drives until I manually access them? Seems all the "answers" I found elsewhere result in editing the registry or something similar which I suppose if thats what it takes I'll do it. Just wanted to get a second opinion before I go in changing things that may or may not address the issue.
View 3 Replies
ADVERTISEMENT
Jun 15, 2011
I have a user who is logged into my domain as admin and they are able to see all of my network, but they are not able to map or see a drive share that is on another Windows 7 machine. I have double checked permissions on both the users machine and also on the other two Windows 7 machines and they are set correctly.To make this even more bizarre, I can log into my domain name as them and I am able to both map and see the drives in question. The laptop that the user is logged into can see all of the network but when they try to access the drives in question, windows tells them that it can't find the drives.
View 14 Replies
View Related
May 2, 2009
I have two XP machines as well as my dual-booted (XP Pro SP3/ Windows 7 RC 7100)
laptop - whenever I reboot my Windows 7 system it fails to reconnect the mapped network drives.
XP reconnects them without fail.
The only way I've found round it is to change the workgroup name, change it back and reboot - then it works.
This is VERY ANNOYING and such a basic problem - I've seen the problem all over the internet but no solutions.
Only MS could release an RC with such an obvious bug
View 7 Replies
View Related
Nov 1, 2011
I had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 3 Replies
View Related
Nov 1, 2011
I had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 8 Replies
View Related
Dec 29, 2011
Ok. My system's wireless connection keeps 'refreshing' itself every 1 minute. I rebooted the router a few times didnt help. The connection has 5 bars so I checked the event log, and here is what I found.Name resolution for the name teredo.ipv6.microsoft.com timed out after none of the configured DNS servers responded.I am using windows 7 ultimate 32 bit on a desktop pc with a built in linksys card.
View 3 Replies
View Related
Apr 17, 2011
I've started to experience a strange problem where my laptop seems to be completely idle before starting explorer.exe (So I have a blue desktop with only the mouse pointer) this is after login as I have it set to automatically login. I have tried various things, I have looked through Autoruns and there is nothing which I can find which would be delaying startup, I have tried removing almost everything non-essential from startup however the problem does not fix. I have also tried doing a boot trace with Process Monitor to see if any process is timing out, however nothing stands out to me as delaying explorer.exe from starting.
View 9 Replies
View Related
Sep 25, 2009
Windows 7 is booting normally and after I type my password in the login window the text 'welcome' shows up for 8 seconds or so. Then the screen fades to black. At this point, the only thing I see is the mouse pointer (which I can move). Pressing Ctrl-Alt-Del doesn't work (does not respond). This black screen lasts for about 40 seconds, then Windows finally progresses to the desktop. Before this problem occurred, Windows faded directly into the desktop after the 'welcome' text. Does anyone know how to solve this?
A while ago, I thought I had the solution to the 40 seconds delay by disabling the Workstation Service. But now I notice some things do not work anymore like filesharing via Hamachi or via standard Windows Networks, or joining a Domain. How can I fix the 40 seconds delay without disabling the workstation service?
View 9 Replies
View Related
May 6, 2011
When it came back I installed everything and whenever I start it up there is a 10 second delay before the startup animation starts. then it takes its normal course. When my bootup starts now it seems as if it has a much longer bootup than before I rmaed it and it is quite annoying seeing as I have to shut it down because it will not resume from hibernate or sleep.
View 3 Replies
View Related
Apr 4, 2012
I'm using home premium when I enter my password I press enter nothing happens it freezes then welcome screen loads for a minute this just started last week.
View 3 Replies
View Related
Aug 1, 2010
My Canon MF3240 laser printer is causing a timeout delay in Windows 7, when completing the loading of the desktop when booting (cold or warm). Long Explanation: When starting the computer, Windows will load normally to the desktop with near complete functionality. But there is a delay of 60 seconds while something tries to initialize or load. During this delay the blue spinning circle ("Working") can be seen over the Network icon in the systray, and over the Currency & Weather gadgets, and in Windows Explorer at the major headings.While the "Working" icon is showing I can open the browser and I have internet access. But I can't open task manager or use Windows Explorer until "Working" is done. The condition was first noticed after I uninstalled my old Canon MP780 printer and replaced it with an Epson Artisan 810. The Canon MF3240 was already installed before this change. I always suspected the Epson printer had corrupted something. This weekend I finally got around to removing all the printers, cleaning up, and reinstalling the printers. I reinstalled the Epson first (using correct W7x64 drivers) and all was good. Windows boots right up onto the desktop and everything is connected - no delays. Then I reinstalled the MF3240. Bang - right off - the delay condition.Now, if I unplug the USB cable for the MF3240 and boot (cold or warm) the delay goes away. What do you think is going on here? More Info: The original installation of the MF3240 was done when I first installed Windows 7. I was new to Windows 7 and there was some thrashing about to get the printer set up, I recall. I finally got it working by manually installing the drivers. These were XP-2000 drivers, best I can tell.
The driver I just installed for the MF3240 is MF3200_MFDrivers_Win_x64_us_EN_7 . I got these drivers from the Canon website for my printer, but I can't remember exactly when, but it was a while ago. I never installed these drivers before. Today, on that website, the only Windows 7 driver available is MF3200_MFDrivers_Win_x32_us_EN_7.exe ". Actually, that is the only driver for all Windows OS's. Also, the downloads above do not contain an installer package, only the .inf's and .cab's. If I knew then what I know now, I would plug in the printer, Windows would not find a driver, I will browse to the folder with the drivers, and the x64 drivers are installed. On the reinstall Windows found drivers and installed them automatically when I plugged the printer in. I had to go to the printer's properties and update the drivers to the x64 version. However, the delay condition happens in either version of the driver that I had installed.
View 5 Replies
View Related
Jan 4, 2011
My computer's operating system is Windows 7 Professional which is up-to-date and all the drivers are the latest I can find.The start up sequence is being slowed down by protracted activity on the hard disk, after the display of the Desktop, such that the only programme I have set to start at bootup is delayed by up to three minutes. This is the antivirus programme F-Prot Antivirus for Windows 6.A log obtained from msinfo32 shows the following:
System Information report written at: 01/04/11 23:29:32
System Name: TESTNET
[Startup Programs]
Program Command User Name Location
[code]....
As I do not use the Sidebar is it possible that Windows is trying to start it causing the delay? If so, how do I disable the autorun registry entries? I have no recall of how or even if I disabled the sidebar from loading.
View 9 Replies
View Related
Oct 8, 2012
My monitor remains in powersaver mode until windows logon screen comes up. This started happening a while ago and i have been putting off asking baout it. I have searched google but have found no answers. I am unable to browse bios or anything and it is really annoying. [code] Steps to reproduce problem:
1. Turn on computer
2. Monitor does not display until logon info needs to be put into windows
View 9 Replies
View Related
Mar 6, 2012
When I boot and the Windows 7 desktop appears I can't use my keyboard and mouse for about 5 seconds. As a matter of fact none of my USB-connected periphals are available at that point. I have to note that it's my first system with a lightning fast SSD. Booting Windows to the desktop takes only 10 seconds. Maybe it's just too fast for everything to initialize?
Keyboard: standard USB Logitech keyboard
Mouse: Steelseries Xai USB
Motherboard: Asus P8Z68-V Pro Gen3
View 6 Replies
View Related
Mar 23, 2012
The power went out a few days ago. When I came home, my computer was off, but it's set to turn back on when power is restored (I think 3 attempts max.). I turned it on and everything seemed normal until the "windows is starting" screen (the one with the windows logo on the black screen). I thought the computer froze after sitting there for 5-10 minutes, and I turned it off. I unplugged it for 5 minutes, then turned it back on and ran the repair wizard. It found no problems and I tried starting windows again. After 5 minutes I was going to turn it off again, but I noticed the windows logo was still animated, so I let it sit. After about 20 minutes I heard the startup sound. I came back and windows had loaded. Everything worked normally, as fast as usual, no problems at all. I shut my computer off so I could plug it into the UPS I've had for a while but never got around to connecting. When I tuned it back on, it took 20 minutes to get past the load screen again. I've had it take a couple extra minutes in the past when power was lost, but only the first time I started it back up.
View 4 Replies
View Related
Jun 11, 2012
win 7 hangs on startup and freezes or BSOD 0x000000d1 within 1 minute usually. system runs fine if I boot to safe mode.no serious hardware or software changes around the time it started happening (that i recall) I didn't use my pc much for a few days and then the first time i noticed (around June 7th, 2012) I just logged in and there was a popup saying something like windows had recovered from an unexpected shutdown and the system was really slow and then it froze. Makes me think maybe a power outage corrupted something (i'm not on a UPS) or a windows update went badly. i tried to update several drivers in safe mode but none were succesfull. Catalyst Install Manager says: "Failed to load detection driver"sfc /scannow reported no violations perfmon /report gives me...."Error: An error occured while attempting to generate the report. The system cannot find the path specified. "My oldest system restore point says June 7th, 2012 so i did restore but it still has the problem.I built the system 1-2 years ago and haven't re-installed the OS since.
specs
Manufacturer: Myself
OS: Windows 7 Ultimate x64
CPU: AMD Athlon(tm) II X4 635 2.91Ghz
Motherboard: ASUS M4A88TD-V EVO/USB3
Memory: G Skill 2GB X2 (4GB)
Graphics Card(s):
Two ATI RADEON HD 5700's in Crossfire
Sound Card: ASUS M4A88TD-V OnBoard sound
Hard Drives:
One 100GB Seagate Barracuda ST3100011A on ATA with Windows 7
Two 1TB Western Digital WD10evds-63u8b0's on SATA in RAID1 for storage
PSU: Corsair 850w
Cooling: ?? cpu at 55 celcius at Idle
Keyboard: Microsoft Wireless MultiMedia Keyboard
Mouse: Microsoft USB Optical mouse
Internet Speed: 18 mb/s
View 3 Replies
View Related
Jan 8, 2012
bought a dell touchscreen inspiron one 2320, thought it would be better than my two year old dell (don't see it yet). i am an average user and i am not impressed. anyway the question is why does the monitor go black after 1 minute? i have done all the normal stuff in power options. change power saving settings, change when the computer sleeps. choose when to turn off display. turn hibernation on or off. i upload to Internet and it the shutting down makes it frustrating....
View 11 Replies
View Related
Jan 29, 2009
Is there a way to make a start up process start with a delay of say 30 seconds via the registry? I tried software but none of them work with win 7 beta.
EDIT: If not, Is there a way to have the start up programs start in a certain order?
View 2 Replies
View Related
Sep 26, 2011
I have a broadcom 802.11g PCI wireless card but recently it is giving me a slow connection when on a full bar signal. I then randomly goes back to running at normal speed but then cut out again and goes slow. There is nothing wrong with the connection as it works totally fine on my laptop. I tried a USB wifi adapter at that works fine giving me a fast connection. I been inside the router to make sure all the setting are fine and searched for driver updates etc. I don't think the card is damaged in anyway. I really have no idea why it is giving me such slow internet speeds but then occasionally work fine
View 9 Replies
View Related
Dec 2, 2012
So after I got my stuff all installed and things are working well, I hooked up my router to the new computer and the connection is significantly slower that it was before.
View 6 Replies
View Related
Jan 15, 2012
Earlier yesterday I was having an issue where sound was both playing through my laptop's speakers as well as the headphones I had plugged in. Not really knowing an exact way to fix this I went to the device and disabled it hoping that could temporarily solve my problem. Now, I am assuming because of this whenever I boot into Windows 7 I get to the "please wait" screen then instantly get a blue screen every time and I can only boot into safe mode. I found this thread (one or more audio service isnt running) through Google and found that this user had the same issues I was having (I am also getting the audio service error when I run the troubleshooterI believer my speakers are Realtek and when I run dxdiag I get the hardware ID of DAUDIOFUNC_01&VEN_10EC&DEV_0272&SUBSYS_1025028D&REV_1000 (I ran this dxdiag in the copy of the Windows 8 dev preview I have also installed to my hard drive)I do have the results from Windows_NT6_BSOD_jcgriff2 attached but when I ran perfmon /report I got: "An error occurred while attempting to generate the report.The system cannot find the path specified."My copy of Windows 7 Home Premium 64 bit came pre-installed on my machine which I got either 2 or 3 years ago, don't remember exactly
View 4 Replies
View Related
Aug 31, 2009
Im running Windows 7 Professional x86 final on this machine:
athlon x2 5.000+
2x2gb ddr800 dual-channel memory
ati radeon hd 4650 512mb 128bits
500g sata hd
The os is updated and all the settings of the os are on default. The settings of videocard are in performance/balanced.
The problem was found in counter-strike 1.6 and Urban Terror 4.1 (its a quake3 mod).
In desktop, without gaming or something else, i see that the mouse has some kind of delay (almost nothing here).
During the gameplay i get lag and slow fps...
I disabled the "DESKTOP COMPOSITION" and the problem was not solved but its better with this crap disabled.
I wanna know if you can tell me if there is some config, drive issue, or something else to make it works without this option disabled.
Im thinking in some option on regedit to make desktop composition stop lagging the opengl games.
Does anybody knows how to solve it without disabling the desktop composition?
I like the face of windows 7 and don't wanna loose it for a game too old.
View 1 Replies
View Related
May 2, 2012
Dell Inspiron 1545.
Windows 7 Home Premium, Service Pack 1
Pentium Dual-Core CPU T4200 @ 2.00GHz
4.00 GB
64-bit Operating System
This error keeps coming up and keeps making startup time very lengthy or not at all.
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 30/04/2012 21:11:10
Event ID: 351
Task Category: Standby Performance Monitoring
Level: Error
[Event Log] .......
I tried editing the register and I tried updating my drivers (no yellow triangles) but nothing has worked?
View 5 Replies
View Related
Dec 31, 2010
Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
View 11 Replies
View Related
Mar 8, 2012
Three Computers on a home network. Desktop in Office (Windows 7) . Wife's Laptop (Windows 7). My laptop ( Vista unfortunately). Norton Security Suite and all three. I have a network setup and a Homegroup established.
Everything was setup and working so that I could share files between all three. My wife was able to open a desktop file make changes and save it back to the desktop computer.
All of that changed. Now we get a message when trying to save the file. "You do not have permission to save in this location. Contact the administrator to obtain permission".
I have given the entire "MY Documents" sharing permission to everyone. I have checked everything. I have looked over all kinds of forums and nothing has worked.
I am to the point of doing a complete reinstall of Windows 7 on my Desktop.
View 5 Replies
View Related
Nov 10, 2012
After starting up windows, it becomes inaccessible for 2 or 3 minutes and got the internet connection icon loading in the taskbar, it may caused by a program that needs internet connection while startup or after startup. So I want to know which program needs internet connection while startup or after startup and how to block it from using internet connection.
View 1 Replies
View Related
Dec 14, 2012
I have a notebook that is connected to ADSL modem via Ethernet cable.I don't know how it happened but at a certain moment after I rebooted it, my network connections started looking like this:I have an extra unidentified network and at the start up my notebook tries to connect to it and fails.So I have to manually disable and enable Local Area Connection for it to start working and things look like they should:This happens every time I start up Windows.
View 4 Replies
View Related
Jan 31, 2013
I am a student worker and I am having a problem with a small project that I'm working on. I have a user that wants one of our computer labs to have his networked printer added into the list of available printers. The Printer is a Brother HL-5250DN, and I already have the .inf driver. I have written a script but it does not seem to work. I am replacing the printers IP address with a generic loopback.
View 1 Replies
View Related
Jan 6, 2009
I have an HP 3330 MFP on a computer running Vista. I am trying to add it as my printer on my laptop running Windows 7. I can see the printer listed on the Vista computer but when I try to make it my printer it just tries to connect forever. Any suggestions?
View 3 Replies
View Related
May 20, 2011
I have a desktop running Windows Vista Home Premium and I connect to it via the built in vpn client with Windows 7 Home Premium. I can access shared files a folders but, I have it set up where I can access flash drives and CD drives over VPN. Just tonight this has stopped working. I have all the right permissions set up and it still says network resource not accessible. This morining, I did not log on to the server I just started it up. Could me not able to access shared flash drives and CD drives because I am not logged in on the server end? I will try to logon later tonight when I go back to the server.
View 2 Replies
View Related
Nov 11, 2011
I have two Windows 7-64 computers on ethernet. The other computer has four physical hard drives, one partition each, C, D, E & F, all shared, and with "Everyone" given full access on the Security settings.i can write files from my computer to that computer's drives C, E & F with no problem, but whenever I try to write a file to that computer's D drive, I get a popup window titled "Destination Folder Access Denied", with an error stating, "You need permission to perform this action". (I get analogous messages if I try to delete a folder, etc.)I can read from that drive fine, and I can transfer files to it using UltraVNC.I've gone through all the sharing and security properties of that drive, and I believe they're all identical to the other drives that cause no problems when I write to them.
View 1 Replies
View Related
