Windows 7 Hangs On Startup?
Mar 10, 2011
It hangs on start up; it gets past the Bios but stays at the Windows Logo and says "Loading Windows" until I am forced to shut down. Here are my specs:
EVGA 780i mobo
3.0ghz intel duo-core processor
4 gigs of DDR2 RAM
1 TB seagate HDD
1 gig of video (Gforce 9800GT 512mb SLI)
So my computer was working perfectly fine until this happened. However, this has happened before! This same exact problem happened before, so I figured it was the hard drive so I got a new one(the one I have now).Fine, it worked for about 1 month. Then this happened... again. I do not know what the problem is. Like I said in the description if my computer does get past the windows logo and I log on, after about 10 minutes of running I freeze and have to force shut down. Then I am stuck back at the Windows Logo... I have also tried to insert the Windows CD itself and try to repair windows, but even then it still won't get past the windows logo.
View 6 Replies
ADVERTISEMENT
Jan 22, 2013
A friend asked me to take a look at her laptop. It's a Toshiba Satellite L775 with Windows 7 Home Premium. The computer starts fine until the green progress bar finishes loading. After that, a cursor appears and can be moved, but nothing else loads. F2 loads BIOS during startup, F12 loads a boot menu, and every other F key (other than F8) loads an OS selection screen. F8 does nothing. I've also tried booting from a restoration disc. The pixelized progress bar loads (slowly, as is usual when booting from a disc) but then the normal boot process continues with the same problem as before. I can't even get into Safe Mode to try and troubleshoot anything.
View 14 Replies
View Related
Nov 24, 2010
I have installed Windows 7 Ultimate on it - the OS is installed on a 64GB Kingston SSD drive. When I boot up the PC it sits at the "Starting Windows..." screen it will stay that way for probably 2 minute then you'll see the colored orbs come in and then Windows loads no problem.Putting the OS on a SSD i figured it should be incredibly fast - I mean I have Ultimate put on several other computers with HDD's and it loads faster.I'm using an ATI Radeon HD 5460 (i think thats the model) with drivers that have been fully updated. That is the only expansion slot being used.
View 3 Replies
View Related
Jun 16, 2012
I have an Acer AX1301, and when it boots, the startup repair screen comes up.The startup repair loads files, and then, sometimes, I can select input, but then it just hangs on the blue splash screen with the bird.I have left it for up to 24 hours, but it never goes to the next step.Safe mode doesn't work, and I have tried doing the repair from a Windows 7 recovery disk. No good. The first time I used the disc, it got to the point where it was searching for Windows, but seemed to hang on that.Also, if I press Alt+F10, I can get to the Acer recovery, which has 2 options, one which will completely re-install everything and clear the drive, and another that will retain user data. If I do the user data one, what will I lose on the drive? I have my files backed up, but will I have to re-install my various programs and preferences, email settings, etc., or will all of that be retained?
View 5 Replies
View Related
Mar 22, 2011
I recently did a clean install from Windows XP to Windows 7 64 bit on my computer. Setup works just fine and installs correctly. After setup is finished windows tries to startup but it hangs after the starting windows screen.
My specks are (custom computer I bought from friend)
Asus A8N SLI motherboard
AMD Athlon 64 X2 Dual 3800+
OCZ PC 3200 400 MHZ 1024 MB Dual channel (x2) memory
Zotac nvidia GeForce 210 graphics card
View 9 Replies
View Related
Aug 25, 2011
i just did fresh installation of windows 7 on my mother in laws computer and for some reason when the computer is turned on or needs to restart the computer hangs where it is supposed to be reading from cd drive, i see all lights working but it will not load to windows. if i press f8 to enter boot menu and select the hard drive it starts with out a problem.
View 3 Replies
View Related
Sep 2, 2010
I have an HP laptop with Win 7 Home Premium. When I boot with my new Wacom Intuos3 tablet plugged in (USB), the system hangs after the Windows logo loads. (Dark blue screen). I have to do a hard reset to get the computer to restart. Windows boots fine with the tablet UNPLUGGED. The tablet works if plugged in AFTER Windows is loaded. I have tried all the available drivers for this tablet. Changing the drivers didn't affect the function of the tablet or eliminate the hangup at boot. Wacom says the issue is not with their driver, but with how Windows is loading the services. I have turned off "tablet pc input" in Services; "Wacom tablet service" is turned on. (Wacom tech didn't think these services conflicted but some had posted the suggestion to turn windows tablet pc service off.) Although I can use my tablet, it's a real pain to have to unplug at each reboot.
View 9 Replies
View Related
Sep 14, 2011
I've recently upgraded my computer with an ASUS P6P67 Pro, Intel i5 2500K, Corsair Vengeance 8GB and Corsair TX650 The operating system is Windows 7 Ultimate 64-bit.The installation of hardware went fine, I used my WD Raptor 64GB as system drive and connected my 2 other drives.Maxtor 250GB and Samsung Spinpoint 750GB. (they will be replaced eventually)The installation of Windows 7 also went fine, no problems at all. When it was installed I could see all harddrives and I could browse them. But after I installed the drivers from the DVD from Asus and restarted the computer it hangs at the Windows logo waving. It just keeps waving for hours.When I disconnect the Maxtor and Samsung drive, it boot up correctly. I've only tried to connect them to the Intel SATA Controller. I tried to switch between the connectors but it didn't boot up.When the drives where disconnected I could resume the configuration of Win 7 and I ran Windows Update to install SP1 but still the same problem when i tried too connect the drives?I reinstalled 2-3 more times, but no. Then I changed in BIOS from ACHI to IDE on the Intel SATA Controller and reinstalled again and now it works?I updated everything in Windows and restarted it several times and it boot up every time. But I wish to use ACHI, since I'm planning to run RAID 0 I've used the latest chipset drivers from Intel and IRST as well.I need to clarify that the problem begins after the installation of chipset drivers.
View 8 Replies
View Related
Jun 14, 2012
my windows7 x64 will not boot completely. I get the welcome screen, with a continuous whirling circle or, sometimes, i get to the desktop, but no icons or task bar. I can't get any response from control/alt/delete to get to task manager. I have easy access to safe mode, and everything there seems normal. I have run AVAST, Malwarebytes, and a couple of other antivirus programs from safe mode, with no virus or malware identified. I have read every post in as many tech sites as I can find, and nothing seems to work. I have already tried going back to earlier restores, and am out of them.
I need to backup all my work files and reinstall Windows 7, I guess. I'm concerned that I will not have the drivers I need when I do that. I have a backup Macrium system image, but it's a year old, the external drive it's on clicks like crazy, indicating it's going bad, and I've got a LOT of work on my machine I don't want to lose. I've already beaten myself severly with a rubber hose for putting off backups and restore disks, so save that...
View 5 Replies
View Related
Jun 18, 2012
Explorer Hangs at startup Win 7 ultimate 64-bit and gives the following :
Problem Event Name: AppHangB1
Application Name: explorer.exe
Application Version: 6.1.7600.16385
Application Timestamp: 4a5bc9bb
Hang Signature: d5a7
[code].....
I have tried formatting, system restore, virus scan with Microsoft Security essentials..
View 1 Replies
View Related
Jun 11, 2012
win 7 hangs on startup and freezes or BSOD 0x000000d1 within 1 minute usually. system runs fine if I boot to safe mode.no serious hardware or software changes around the time it started happening (that i recall) I didn't use my pc much for a few days and then the first time i noticed (around June 7th, 2012) I just logged in and there was a popup saying something like windows had recovered from an unexpected shutdown and the system was really slow and then it froze. Makes me think maybe a power outage corrupted something (i'm not on a UPS) or a windows update went badly. i tried to update several drivers in safe mode but none were succesfull. Catalyst Install Manager says: "Failed to load detection driver"sfc /scannow reported no violations perfmon /report gives me...."Error: An error occured while attempting to generate the report. The system cannot find the path specified. "My oldest system restore point says June 7th, 2012 so i did restore but it still has the problem.I built the system 1-2 years ago and haven't re-installed the OS since.
specs
Manufacturer: Myself
OS: Windows 7 Ultimate x64
CPU: AMD Athlon(tm) II X4 635 2.91Ghz
Motherboard: ASUS M4A88TD-V EVO/USB3
Memory: G Skill 2GB X2 (4GB)
Graphics Card(s):
Two ATI RADEON HD 5700's in Crossfire
Sound Card: ASUS M4A88TD-V OnBoard sound
Hard Drives:
One 100GB Seagate Barracuda ST3100011A on ATA with Windows 7
Two 1TB Western Digital WD10evds-63u8b0's on SATA in RAID1 for storage
PSU: Corsair 850w
Cooling: ?? cpu at 55 celcius at Idle
Keyboard: Microsoft Wireless MultiMedia Keyboard
Mouse: Microsoft USB Optical mouse
Internet Speed: 18 mb/s
View 3 Replies
View Related
Jun 16, 2012
I have an Acer AX1301, and when it boots, the startup repair screen comes up. The startup repair loads files, and then, sometimes, I can select input, but then it just hangs on the blue splash screen with the bird.I have left it for up to 24 hours, but it never goes to the next step.Safe mode doesn't work, and I have tried doing the repair from a Windows 7 recovery disc. No good. The first time I used the disc, it got to the point where it was searching for Windows, but seemed to hang on that.Also, if I press Alt+F10, I can get to the Acer recovery, which has 2 options, one which will completely re-install everything and clear the drive, and another that will retain user data. If I do the user data one, what will I lose on the drive? I have my files backed up, but will I have to re-install my various programs and preferences, email settings, etc., or will al
View 2 Replies
View Related
Jul 4, 2011
I am new here so apologies for being a newbie. I have a mid ranged gaming tower from ncix. That's about 7 months old. Its a 64bit windows 7 with 12gbs ram and 1tb hard drive.I was playing Starcraft with friends earlier today when suddenly the computer restarted during the match and was unable to boot up again after the sudden restart.It hangs at a black screen with the blinking underscore.
View 2 Replies
View Related
Oct 3, 2010
I just installed a retail copy of win 7 on my laptop and have been experiencing some issues. At first everything worked fine but out of the blue my desktop/folders have not been auto-refreshing. Whenever I try to delete or create a new folder I have to manually refresh to the folder in order to view it. When shutting down my laptop it takes 5+ minutes and when my desktop is loading after booting up the laptop it takes several minutes for everything to load and for the win 7 chime.
Finally, it won't allow me to update. When I try to use the windows updater it hangs for a while on "creating restoring point" (which may be normal) but then permanently hangs on installing update 1/16 at 0%. If I try canceling the update nothing happens and even when I try to shut down the laptop it attempts to install the updates but hangs on update 1/16.
From researching these issues I've realized that the auto-refresh problem is not uncommon and has something to do with a network. This may be unrelated but these problems only started to occur when I was transferring pictures via a USB stick.
View 1 Replies
View Related
May 22, 2012
Background Info: Dell laptops (E6420,E6410,XPS), Windows 7 Enterprise 64bit, Connected to AD
The laptops are intermittenly hanging at the "Please Wait" screen right before the alt + ctrl + Delete option appears. The time it hangs varies. Sometimes it can hang for 2 minutes, sometimes it could hang for an hour. So far the only pattern we could find is that it happens mainly while the computers are not connected wired to the LAN and on wireless. If we toggle the wifi off during the please wait, a few seconds-mins later it finally shows the option to login. I set the NLA service to manual startup (network list service was already set to manual as well), and it stopped doing it. I enable it, and it starts hanging on message again. It also works fine in safe mode (both networking and without).
Any suggestions or ideas? Would leaving the NLA service to manual cause any major conflicts? Are there any timeout settings we could verify?
View 8 Replies
View Related
Nov 18, 2011
I bought this Fujitsu laptop for less than a year. Its only for my school work. It takes forever to bootup, startup and it sometime hangs when I open up a program or typing.For the bootup, it takes very long time on the window logo, after that the black screen, followed by the welcome page with the loading cursor. Each of this process take a long time. For startup, its not so long but its still quite lag. For the opening up of program and typing, everytime I open up my visual studio, it will take a long time to show up and even if it showed up, it will be "not responding".So I will have to open it a second time before I can start using itWhen I am typing my codes, it will randomly hang and show that the program is not responding. I am still able to move my cursor though.
View 9 Replies
View Related
Jan 14, 2011
Ever since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies
View Related
Feb 18, 2012
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
View 1 Replies
View Related
May 17, 2011
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X2 240 Processor, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 2815 Mb
[code]....
Antivirus: The Shield Deluxe Antivirus, Updated and Enabled DISPLAY MODEL: All I got with it was mouse and power cord On Startup, I get icons for the Administrator and Standard user. Clicking on the Administrator gives me a desktop with an on-screen keyboard; the computer keyboard disabled, and a panel saying,"FAILED, The application has failed to start." Going back and clicking on the Standard User icon gets me running for the most part. Here's the BIG problem. Every time I try to install any program, the User Account Control box drops down and asks for the Administrator Password, plus the question,"Do you want to allow the following programs to make changes to your computer?" You click "Yes", but, since no one is in the Administrator office, your installation comes to a halt. This blocks "Install" and "Uninstall". I get lots of messages I need Adobe Flash Player. I've trie over and again to install it, going to Windows 32 bit, but can't uninstall my previous tries. It will always download, and that's all. I've tried to install my digital camera's CD, but can't.
View 6 Replies
View Related
Aug 17, 2010
I hate it when this happens and so far, the startup repair has always been able to fix the problem. Today, I'm not so lucky.
I'm using my other built right now coz I have to work. I don't remember what updates I did last night but I do remember the dvd drive firmware was updated.I popped in the system restore disc, start it up and the same page appears: Start with windows start up or Start windows normally. Tried both and neither one of them would bring up system restore. This built was only a month old and was hardly used so far so no system restore point was created at this point. I have files in it that I would like to keep but I can't get to them right now so a clean fresh install is needed but I can't get it up.
View 9 Replies
View Related
Jul 27, 2012
i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies
View Related
Dec 14, 2012
windows 7 startup repair on every boot but after startup repair hibernate works. How to fix?
View 1 Replies
View Related
Feb 11, 2011
My hp dv3t has been giving a message about checking a disk for consistency every time I reboot(ed) for about a week now, but today it froze after the countdown reaches zero (for bypassing the procedure)�nothing I do can get it past this step. What do I do? I tried booting from Safe Mode, it listed a bunch of drivers but then froze.I'm using W7 64-bit Home Premium.
View 3 Replies
View Related
Mar 15, 2011
Trying to disable some of the bloatware that came with my HP G62, as well as disable unneeded auto-updates, and have been blocked from doing so.Ran msconfig, startup entries... Unchecked, hit "apply" and they just become checked again. (Ran as administrator on admin account)Tried "Tuneup Utilities." Same effect.Have been trying to disable Yahoo Messenger from starting and it just keeps on starting.I have unchecked the startup box in the pref dialog of the prog.Is my admin account not really admin? (No other accounts on the computer)
View 8 Replies
View Related
Nov 17, 2012
Windows 7 Home Premium x64 will hang after the "Starting Windows" logo, showing only a black screen, forcing me to hold down the power button.Windows will boot in safe mode and will boot if I disable my video card from Device Manager.I have run hard drive and memory diagnostics without any errors showing up.I did not change anything before the problem began occuring.I've already tried restoring to the initial system image from Lenovo OneKey Recovery (I'm using an IdeaPad Y560) and using the Windows System Restore, as well as updating drivers and BIOS.Attached are my event logs in administrative view from today (The problem has been occuring for a week or two, however, I don't have access to logs from that time), in which I reinstall my drivers and attempt to install a download manager in safe mode among other things.
View 8 Replies
View Related
Mar 7, 2011
I just installed a new ssd (X-25m) on a clients computer along with Windows 7 64bit and 8GB of RAM. The computer hangs for anywhere from 10 seconds to 30 seconds+ and sometimes just freezes up all together until I restart. Sometimes, it freezes icons and I can still use the mouse, and can double click to start a program, but it won't start up until it unfreezes, then everything I've opened suddenly opens all at once. Other times, even the mouse is frozen, and I have to wait 30s to a minute before I get it back.
Things I've tried- all Windows Updates, and updated all chipset drivers for the mobo (MSI P6N SLI Platinum)
View 1 Replies
View Related
Mar 14, 2011
New hard drive, new install of windows 7. Machine freezes without warning, Sometimes after 2 hours, sometimes after 2 days. When frozen, unable to CTRL ALT DLT or Start / shut down.How to diagnose root cause and solution?
View 4 Replies
View Related
May 6, 2010
I am trying to upgrade from Vista Home Premium to Win 7 Ultimate using a DVD bought at retail. The upgrade process hangs while Gathering programs and settings, always at the 86% mark. Yesterday it hung at 6:00 PM and I let it run overnight -- at 9:00 AM next day it was still hung. No error message, no shutdown, just sitting there waiting.Following suggestions from various sources I have tried working from an empty start folder in Vista, and from a clean boot in Vista. Neither made any difference. I have turned off antivirus and taken down the firewall. My system is approved for upgrade by MS. I have tried starting the upgrade program from Vista safe mode and by booting from the DVD, but was not allowed to continue. I have done everything suggested by MS as a prelude to upgrading.My computer is a Dell Inspiron 530.
View 7 Replies
View Related
Aug 28, 2010
Windows 7 Professional 64bit When I try to perform a restart, the computer goes into oblivion. Drive light flickers a bit but I've let it rest over an hour and it didn't restart. Have to press the reset button. Otherwise everything seems OK. I've run deep scans with Malwarebytes and Kaspersky and no warnings?
View 4 Replies
View Related
Mar 7, 2011
I just installed a new ssd (X-25m) on a clients computer along with Windows 7 64bit and 8GB of RAM. The computer hangs for anywhere from 10 seconds to 30 seconds+ and sometimes just freezes up all together until I restart. Sometimes, it freezes icons and I can still use the mouse, and can double click to start a program, but it won't start up until it unfreezes, then everything I've opened suddenly opens all at once. Other times, even the mouse is frozen, and I have to wait 30s to a minute before I get it back.
Things I've tried- all Windows Updates, and updated all chipset drivers for the mobo (MSI P6N SLI Platinum)
View 5 Replies
View Related
Nov 13, 2012
I have a problem with my laptop (A Sony Vaio VPCEB4J0E) Basically, whenever I tell it to shut down, it doesn't actually do so and only closes Windows explorer so I'm left looking at my desktop whilst nothing happens.
View 4 Replies
View Related
