Windows 7 Default In BIOS After 30 Sec When I Boot PC
Jan 21, 2009
First off, Windows 7 is very cool; I might use it more than vista now that I got internet for it, but that will have to wait for a month or two. My first question is: when I boot up my comp, and I have to pick either vista or Windows 7 (I have Windows 7 on another partition), I usually leave the room while my comp is booting, so after 30 seconds the BIOS picks Windows 7 as the default OS because its first. I would really like to boot up my pc while doing something else, and I would love for the BIOS to pick Vista after 30 seconds instead of Windows 7 because I use Vista for games and such. Is there some way of doing that or do I have to sit around throughout the start up and manually pick Vista?
My second question seems a little picky or over the edge, but when I boot up my comp and have to pick an OS, it prints "Windows 7" while underneath it it prints out "Microsoft Windows Vista". Is there some way to add 'Microsoft' in front of Windows 7 when Im picking in the BIOS? It doesn't look as good without the Microsoft.
View 9 Replies
ADVERTISEMENT
Dec 28, 2012
I bought a Windows 8 laptop, ASUS Q500A, and reformatted it with Windows 7. I went into the BIOS and used "Restore Defaults" and now all Boot Option Priorities are deleted. Each time I boot the laptop, it automatically goes to BIOS (or UEFI). I tried inserting the Windows 7 disc so I can access Startup Repair or Command Prompt but it freezes before it could get anywhere even when I tried it with an external CD/DVD drive. I cannot get the laptop to boot to the hard drive or CD drive at all, how I can reset the boot option priorities so it will be boot to the hard drive again.
View 1 Replies
View Related
Aug 25, 2012
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies
View Related
Jan 21, 2009
First off, Windows 7 is very cool; I might use it more than vista now that I got internet for it, but that will have to wait for a month or two. My first question is: when I boot up my comp, and I have to pick either vista or Windows 7 (I have Windows 7 on another partition), I usually leave the room while my comp is booting, so after 30 seconds the BIOS picks Windows 7 as the default OS because its first.
I would really like to boot up my pc while doing something else, and I would love for the BIOS to pick Vista after 30 seconds instead of Windows 7 because I use Vista for games and such. Is there some way of doing that or do I have to sit around throughout the start up and manually pick Vista?
My second question seems a little picky or over the edge, but when I boot up my comp and have to pick an OS, it prints "Windows 7" while underneath it it prints out "Microsoft Windows Vista". Is there some way to add 'Microsoft' in front of Windows 7 when Im picking in the BIOS? It doesn't look as good without the Microsoft.
View 5 Replies
View Related
Jun 12, 2009
How to Change the Default Operating System to Start in Windows 7 ?
View 0 Replies
View Related
Oct 26, 2009
I am choosing which OS to boot by changing the boot order in my BIOS. To me, this seems clean and simple. I built 32 bit XP on one disk, then removed that disk from my system, installed a different disk, and built 64 bit Windows 7.
When both disks are installed, I change the boot order to select the OS I want, and each OS sees and can use the files on either disk.
Am I asking for trouble here, or is this as clean as I think it is? What I want is one set of user document files which can be used from whichever OS has been booted.
View 2 Replies
View Related
Jul 5, 2012
I have a Lenovo ThinkPad X60 laptop with Win7 32-bit Ultimate and an SSD (I know, I know, just go with it. I'm building a desktop soon). I could list the specs, but that's useless for this problem (I'd think).
At times (not always), when either resuming from hibernate or booting up from a shut down, the computer generally freezes at the point right after the BIOS screen. So it's just a black screen. This is before the window that says "starting up" (literally a window... the Windows logo). Whenever it freezes, it NEVER goes to the boot screen of Windows. I'm assuming this is an error with the hard drive, since the OS is on the SSD and the boot screen is from the mobo. However, this only started happening after a rather heavy fall to the ground that cracked many parts of the plastic shell on the computer. It still works occasionally when I can get it to boot up (nothing different when it boots up... same settings and everything. Spontaneous).
I have tried:
1) Cold reboot
2) Removing battery
3) Going off only battery
4) Unplugging EVERYTHING from the computer
I have not tried chkdsk yet. Is it necessary? Also, would there be a log somewhere of what happened? It never booted into Windows.
View 4 Replies
View Related
Apr 4, 2011
We just build a new system to play around with the Intel Rapid Matrix RAID
Asus P8P67 MB + 8GB RAM+ I5 2500K + 2xWD BLUE HD SATA 6 IN SATA 0 and SATA 1 ( SETUP AS RAID Mirror)We install the Window Ultimate 64 Bit in the RAID Drive .... No problem after all the drive install We also allocate 50GB for doing a image backup (Drive F) We restart the system and goto BIOS to set the HD from RAID to AHCI ( This is the situation happen when the BIOS reset)
Supprise me the system can boot form the Drive ...... (In Device Manager .... I see two WD 1TB HD instead of one 1TB RAID Drive) But when I use Disk Manager it takes really long time to run... I can't wait for that long and shut down) On My computer I only see one HD with 4 Partitation ...
I restart the system and Goto the BIOS to reset back to RAID...and it give error..
I but the W7 Ultimate Boot disk to repair but no success.. Try to load the Backup Image .... cannot find it...
From the old time .... if the BIOS reset it will set to IDE Mode ... Then I am'not able to login to window it will come up blue screen and I just reset to RAID it will fine.... But nowadays... the New MB set Default AS AHCI...then I encounter this issue.... Lucky ... we just testing the new system now..
If I have a cooperate customer want to setup a RAID drive and suddenly Power Cut Down.... BIOS reset..
View 1 Replies
View Related
Nov 16, 2011
Windows 7 ultimate 32 bit suddenly switched off, reboot does not show on screen which reads "HDMI CHECK SIGNAL CABLE". Using ATI HD4350 fanless with heatsink connected via HDMI lead. tried another monitor using white dvi cable monitor stays blank then shows power saving mode. So that eliminates the monitor & hdmi lead. Could a duff graphics card show this error? No on board graphics. Unable to get into bios no bleeps, Windows 7 dvd no good either, all fans come on and motherboard MSI X58 on board indicator light goes from amber to green when pc turn on so m/b must be ok.
View 7 Replies
View Related
Aug 6, 2012
In the chaos of moving to a new house yesterday, a box my friend was moving ripped and a bottle of beer smashed onto my open and powered on laptop, scattering both liquid and glass everywhere. We immediately powered down and removed the battery, and placed the laptop upside down and mopped up the excess liquid from the outside as much as possible, and set it to dry upside down on a towel.My laptop is a Lenovo U330, I had my brother install Windows 7 on it for me last year, but he kept the disks so I don't have any of them.Several hours & some blowdrying later, we attempted to start up the laptop (I would have preferred to wait longer, but I needed to know if mine would work in case I needed to borrow my friend's for the week). The laptop will load the lenovo startup screen, and then flash the windows loadings screen (with the option to press f2 or f12) for a few seconds before recommending that I run startup repair. Which if I select it, will freeze after a few seconds. Usually my laptop's pretty noisy, but while the battery light flashes as if there is activity going on, there's no noise coming from it at all.
View 7 Replies
View Related
Dec 25, 2011
Sometime when i turn on the PC , all fans are running but nothing boot up no beep sound either. I have to push and hold on power butt to utrn it off then turn it on again couple time to get it to boot up but then it freez up in few min!I have try to boot in bios mode but get same problem it freez!!! when i try to do memories test it tell me i have hardware problem and again it ran memories test for 2 min then free
View 6 Replies
View Related
Oct 22, 2011
Hall drivers/updates for my new build are complete, and when i boot, the first asus bios screen comes up, then displays components (as usual), but then goes back to the first start up bios screen. This cycle happens three times before "starting windows" comes up (i have windows 7 ultimate 64-bit). I have a OCZ vertex 3 60Gb SSD, i5 2500k, asus p8z68-v pro, corsair vengeance 8gb cl8 1600mhz ram, and to get to the windows screen takes 40 seconds. Can anyone explain why it is displaying the bios start up screen three times before 'starting windows?'
View 4 Replies
View Related
May 10, 2012
I just swapped out my old motherboard since it was quite rubbish (really old packard bell m-atx board) for a brand new ASrock P5B-DE motherboard.
However after installing the board and plugging everything back in exactly where it came from on the old board, the PC cant boot into windows 7 64bit. I've tried the repair option and it doesn't work.
I've tried disabling and enabling various options in the BIOS. Also tried removing the memory and only using 1 stick then tried both sticks in different slots and that hasn't changed anything.
I've tried inserting my Win7 CD but it doesn't seem to boot from the DVD drive (will keep trying to see if it can).
System specs are:
Intel core 2 Quad Q6600 @ 2.4GHz (using Freezer Pro7 CPU cooler)
Samsung DDR2 800mhz Ram (2GB x 2)
160GB 7200RPM Hitachi HDD
ATI (XFX) 5830 1GB GPU
Zalman 500W PSU
my next point of call is to try a lower end GPU as i've still got my Nvidia GTS 250 and doesn't use any external power from the PSU.
(P.S. I'm not overly bothered about doing a clean install as i recently did one anyway and I haven't had a huge amount of programs installed on the pc since then. But if I can fix this without a clean install that would be preferable)
View 11 Replies
View Related
Oct 25, 2012
I updated the Bios from toshiba site after that my windows won't start and I can't even get to Bios setup (F2) or Boot sequence (F12). and windows get stuck as soon it starts. I can't even access to Factory Restore. I have no image. For information I am using Toshiba Qosmio X770-107
View 11 Replies
View Related
Apr 21, 2011
I already went to "msconfig" and chose my default OS. Bios still stops at the Windows Boot Manager to show me the only OS there is for me to choose/use. How can I go straight to my desktop without the Boot Manager?
View 2 Replies
View Related
Dec 19, 2012
Yesterday I was attempting to wipe my hard drive as I was putting my laptop for sale. Whilst it was wiping my laptop crashed and would not re boot properly but I was able to access the BIOS . I stupidly changed some settings following some advice on a forum I now cannot find and when I tried to re boot it stays on the philips page for around 10 minutes. None of the keys work, like F12, F2 ect. After ten minutes it give me a screen thats says 1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Status: 0xc000000fThis is how I understand it as my system is in Polish and Polish is not my first language and with technical language I am not fluent and I beleive thats how I made the mistake in the first place in the BIOS.
View 9 Replies
View Related
Dec 11, 2009
My Computer won't Boot windows 7 DVD to make a clean install, I did everything on bios to Boot from "DVD first" but It won't work but It works when you make the Windows 7 installation from Windows.
View 8 Replies
View Related
Mar 21, 2011
I'm currently running a WD 500g with Windows 7 Ultimate x64 and a Seagate 250g with Windows XP Home Edition. I recently changed my BIOS boot order from the WD to the Seagate to see if I could still run XP. Turns out I can. My problem is that now I can't load Windows 7 back up on the other hard disk.Bear in mind that I have no other OS' loaded on any other partitions, and these HDDs are separate. The Seagate is IDE and the WD is Sata.I can load perfectly fine if I set the Seagate to load, but I get the infamous "Bootmgr is missing, Press Ctrl Alt Delete to restart" error msg when I try to boot win7.
I'm running a custom PC with a Gigabyte GA-X58A-UD3R mobo
nVidia GeForce GTS450
Seagate 250g Windows XP
Western Digital 500g Windows 7
6g RAM
i7 940 processor
View 1 Replies
View Related
May 20, 2012
I built a new gaming PC about a month and a half ago and its been running fine up until now. I turned it on a couple of days ago and Win 7 was freezing up. The mouse cursor was a blue wheel and I couldn't click or do anything. I couldn't even access the command line and ctrl+alt+del didn't work either. At this point it did boot up in safe mode. I powered it down and now it won't boot past BIOS. I reseated everything and checked all the connections and everything seems good.
View 3 Replies
View Related
Oct 28, 2012
I have a desktop using a Gigabyte GA-Z68X-UD3H-B3 (revision 1) motherboard. Using the Gigabyte @Bios utility, I updated the Bios to F12. After rebooting as @Bios suggested, I can no longer get Windows to boot. I've noted the following:
1) I have issue accesing the Bios setup. Sometimes I can access it, sometimes I cannot;
2) When I am able to access the Bios, I can confirm the disk Boot Priority, however it's is now showing the drives as SCSI (I only have SATA drives);
3) There is a new setup screen displayed after the Gigabyte logo screen shows. This screen now shows 'Serial ATA AHCI, Version iSrc 1.20E.
Copyright (c) 2003-2008. Intel Corporation.
**This version supports only Hard Disk and CDROM drives. **
Please wait. This will take a few seconds.
Then shows Controller/Bus/Function/Port/Device and lists all harddrives. At the end of the drive list it shows 'AHCI Bios installed'
4. After step 3, it shows the prompt 'Loading Operating System' - the boot hangs at this point.I DID backup the existing Bios before updating it. I have not gone in and copied that file to a floppy to try and flash the Bios using the backup (don't know if this is possible).
View 3 Replies
View Related
Sep 9, 2012
I have a Crucial M4 SSD that I'm running windows on and another hard drive I store other files and programs on, lately I've been having problems with windows crashing and upon restarting, my computer will automatically attempt to boot from the other hard drive unless I physically unplug it and the M4 is the only drive plugged in (when I select boot priority in BIOS the SSD is not a listed option to boot to.) Then if I do unplug the other HD and start windows from the SSD, I'm having problems with windows crashing, a couple times I got a blue screen that stated windows crashed and it shut down to save data. I'm not sure if this SSD is taking a dump on me or if I have a problem with windows?
View 1 Replies
View Related
May 14, 2011
I am trying to install ubuntu from a pendrive...I need to know how can I enter into BIOS in windows7 to change the boot order.
View 7 Replies
View Related
Feb 8, 2013
I was running Windows 7 ultimate x64 on my system (specs below), and I usually let my computer go into hibernate as it does that automatically after some time of system inactivity. Usually it will boot back up with no problem but then last week I tried to boot it up, it crashed and said system error.. I can't remember everything it said as it was obviously coded; since then I haven't been able to bring up the same warning screens.
Instead what happened was I reinstalled windows 7 on the same drive, formatted and all, and after installation it would finalize my settings, etc. After which, it would do a final reboot and, after bios goes, the computer hangs on a command prompt type screen with just a flashing underscore. Asking my family members, they proposed it might be a hardware issue so I bought a new hard drive (Seagate Barracuda 1tb.. not sure if that matters) and tried installing windows on that drive; same exact problem.
I also tried different combinations of RAM with my board, including just one stick of RAM, tried taking out the video card, tried taking out the sound card, etc. No dice. So my dad took his drive from his computer, that has an install of VISTA x64, and I plugged it into my computer and it worked perfectly. Conversely, I plugged my drive with the Windows 7 install into his computer and it also worked perfectly. We tried playing around with a few settings in the BIOS, etc. but nothing gives.
SPECS:
MOBO: Intel DP45SG
Chip: Q6600
Ram: Hynix 2x2gb and 2x1gb kingston
Vid card: Zotac GeForce GT 610
Sound: Creative X-Fi Xtremegamer
BIOS: Should be up-to-date, irregardless it ran Windows 7 before
View 1 Replies
View Related
Dec 28, 2011
My friend recently gave me his HP desktop to take a look at. It came with phenom II quad core processor, 8gb of ddr3 ram, a 1.0 TB WD sata hdd, an integrated geforce nvidia 9100 graphics card, and a 300W psu. When I first turned it on, it booted up to the HP logo and froze there not allowing me to enter the BIOS. After resetting the BIOS I was able to get a slight way into the Windows 7 installation. I tried hooking up the hdd as an external to another desktop and it seemed to be working fine.
I deleted all partitions and reformatted it and tried again, same issue. I've tried with a second hard drive, which i know works, and it also gave the same freezing problem. I've also tried using a different psu which got me a little further into the installation but eventually froze and gave me 0x00000e9 hardware error. With no hard drive at all, it can boot a few times but will eventually freeze up at the logo screen, which led me to believe it might be an overheating problem.
I applied thermal paste to both the cpu and gpu heatsinks and on the first boot it froze during installation with the next few resulting in the same logo screen freeze. I've also realized the gpu heatsink is extremely hot to the touch and at one point, after numerous reboots, the display wouldn't even show. I don't wanna jump to the conclusion that the gpu is fried and buy a new motherboard without consulting anyone.
View 13 Replies
View Related
Feb 20, 2012
Okay so i recently bought a new desktop computer and i left it on over the night and in the morning it was frozen, so i popped out the battery and waited 5 min and then i put it back. Now when i start it up either i get the white and black screen with 2 options, to start windows normally or to run system repair, it fails with repairing and restoring. And sometimes when i start it the windows 7 thingie with the like 4 orbs who create the flag just freezes and a blue screen with white text comes up for 1 sec and then it reboots and i get to the black and white screen with those options that i mentioned before.
View 8 Replies
View Related
May 3, 2012
I updated the bios to the latest version on a gigabyte GA-Z68X-UD3H-B3, using @bios application in windows. I have two disks in a RAID1 All was working fine but upon boot i was getting a message about enabling ACHI. Stupidly curiousity got the better of me and I eventually I said Yes. The next time i turned off i couldn't boot to windows. I went into the bios and noticed that the SATA was set to ACHI, but the bios still saw my RAID volume set up and everything appeared Normal, so i changed this setting to RAID.
it still wouldn't boot to windows - giving some message about not having access to the drive. i tried using the windows install disk but that gives error messages about RECENV utility not working, use chkdsk. it does show a drive as a volume D: (not C: interestingly) I have tried running repair and that doesn't work. I have tried chkdsk/r and that didn't help. In fact that degraded the Raid so i had to rebuild it, and now that is running Normal.
I also can't see any of my restores when i use the install disk.
I don't want to do a reformat and start again as there is data on there that is newer than my last backup.
So the options i am considering
1. remove the disks - place one of them in an external usb case and try to extract the data to save it - not sure if this is possible? and then do a clean install or try the below.
2. can i go back to the previous bios version? is that just a case of power off everything and remove the CMOS battery? and power back on?
3. go through with a new install of win 7 but don't format the drive and see if it just corrects any bad files.
View 5 Replies
View Related
Jul 19, 2012
I changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
View 3 Replies
View Related
Jul 19, 2012
I changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
View 1 Replies
View Related
Nov 7, 2010
So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
View 6 Replies
View Related
Sep 28, 2009
I have xp 32bit and 7 64bit on a dualboot and 7 is the default, however I want to change that.
View 7 Replies
View Related
Apr 2, 2012
My Acer Aspire 5820tz laptop will not work. The keyboard does not respond. The laptop sometimes goes to the Boot Manager when turned on, the boot manager flickers and is uncontrollable. Other times it gives off a loud violent beep sound. Once it went to login but the keyboard would not work so i could not login.
View 2 Replies
View Related
