Boot Priorities And Paths Deleted After BIOS Reset To Default?
Dec 28, 2012
I bought a Windows 8 laptop, ASUS Q500A, and reformatted it with Windows 7. I went into the BIOS and used "Restore Defaults" and now all Boot Option Priorities are deleted. Each time I boot the laptop, it automatically goes to BIOS (or UEFI). I tried inserting the Windows 7 disc so I can access Startup Repair or Command Prompt but it freezes before it could get anywhere even when I tried it with an external CD/DVD drive. I cannot get the laptop to boot to the hard drive or CD drive at all, how I can reset the boot option priorities so it will be boot to the hard drive again.
We just build a new system to play around with the Intel Rapid Matrix RAID
Asus P8P67 MB + 8GB RAM+ I5 2500K + 2xWD BLUE HD SATA 6 IN SATA 0 and SATA 1 ( SETUP AS RAID Mirror)We install the Window Ultimate 64 Bit in the RAID Drive .... No problem after all the drive install We also allocate 50GB for doing a image backup (Drive F) We restart the system and goto BIOS to set the HD from RAID to AHCI ( This is the situation happen when the BIOS reset)
Supprise me the system can boot form the Drive ...... (In Device Manager .... I see two WD 1TB HD instead of one 1TB RAID Drive) But when I use Disk Manager it takes really long time to run... I can't wait for that long and shut down) On My computer I only see one HD with 4 Partitation ...
I restart the system and Goto the BIOS to reset back to RAID...and it give error..
I but the W7 Ultimate Boot disk to repair but no success.. Try to load the Backup Image .... cannot find it...
From the old time .... if the BIOS reset it will set to IDE Mode ... Then I am'not able to login to window it will come up blue screen and I just reset to RAID it will fine.... But nowadays... the New MB set Default AS AHCI...then I encounter this issue.... Lucky ... we just testing the new system now..
If I have a cooperate customer want to setup a RAID drive and suddenly Power Cut Down.... BIOS reset..
Okay so i recently bought a new desktop computer and i left it on over the night and in the morning it was frozen, so i popped out the battery and waited 5 min and then i put it back. Now when i start it up either i get the white and black screen with 2 options, to start windows normally or to run system repair, it fails with repairing and restoring. And sometimes when i start it the windows 7 thingie with the like 4 orbs who create the flag just freezes and a blue screen with white text comes up for 1 sec and then it reboots and i get to the black and white screen with those options that i mentioned before.
First off, Windows 7 is very cool; I might use it more than vista now that I got internet for it, but that will have to wait for a month or two. My first question is: when I boot up my comp, and I have to pick either vista or Windows 7 (I have Windows 7 on another partition), I usually leave the room while my comp is booting, so after 30 seconds the BIOS picks Windows 7 as the default OS because its first. I would really like to boot up my pc while doing something else, and I would love for the BIOS to pick Vista after 30 seconds instead of Windows 7 because I use Vista for games and such. Is there some way of doing that or do I have to sit around throughout the start up and manually pick Vista?
My second question seems a little picky or over the edge, but when I boot up my comp and have to pick an OS, it prints "Windows 7" while underneath it it prints out "Microsoft Windows Vista". Is there some way to add 'Microsoft' in front of Windows 7 when Im picking in the BIOS? It doesn't look as good without the Microsoft.
My wife reset our old laptop to factory settings before we gave it away. She has now discovered that she has not transferred 6 months off videos from our daughters lives which was stored on the laptop. These were not backed up as I was away working. Is there any way we can recover these videos? The operating system was vista.
The HDD password was set by mistake in the Insydeh20 BIOS and i don't know what it is. The computer is a Toshiba Satellite laptop. This is a REGISTERED password on the HDD that was set using the BIOS.
I am using windows 7 professorial for my clients . Usually this PCs are connected to Tv Screen that play some media contents .this media needs to be run under 1920x1080 resolution .sometime we my customer turn off the TV , or unplug the cable it reset the resolution to default like 1280x720 Is there any way to "lock" the screen resolution at 1920 x 1080 and not leave this up to Windows ?
So, we have multiple computers that the wireless capability stops working randomly and can be fixed by going in to the BIOS and resetting it to the defaults.
I have an HP G60 Laptop, I have made the factory default reset discs, but when i boot the first one up it tells me that my hard drive has insufficient space to perform reset.how to fix this without getting a new hard drive?
I've been looking to Reset the default windows size and position of WMP12 (in the Center of the Screen without Maximizing) the way it is used to be when we launch the WMP12 after a fresh install of Win 7. I know there might be some way to reset it's default size and postion from Regedit (Just like we can reset the Internet Explorer size and position by deleting 1 binary value from HKEY User/Software/Microsoft/Internet Explorer etc. )
1. Installed Acer Power Management Utility V6.00, It is located in programAcer, but it can not be run from Start. Because it is not there. (I do not know how to index it and let it show in Start menu.
2. CmosPwd 5.0 does not work in Windows 7 64bit version.
3. The cmos coin battery seems located under the keyboard. It is difficult to move three latches locking it.
I have a dual monitor setup. After making some changes to the orientation/positioning of the 2 monitors, I've noticed that a lot of windows are now partially or even completely offscreen. This is especially problematic with MDI programs (programs that have sub-windows inside them, like Photoshop's dialog boxes and palette panes), as there's no way to interact with the offscreen inner windows and bring them back onscreen.
How can I reset absolutely all window positions of every single program? The registry modifications at Folder View Settings - Reset All to Default fixed Windows Explorer and a tiny handful of other programs, but not even WMP and Notepad were fixed.
I have spent the last couple of hours going through each GPO setting to disable as many features for my kids account on Windows 7 ultimate. I saved the file as kids.msc. The only issue is that I want to be able to clear these settings when needed, so that i can fully access the features. I could not find any options in GPO that allows you to reset the settings back to default...
I just mess around with IE9 and Windows Live Mail. there's a "reset" button in IE9 that I could reset everything back to factory preset but how about Live Mail?
I run windows 7 since the first day of release and i can't figure out how to set up network priorities. I was trying to start a virtual lan in order to use for gaming. Anyway in order to do that i have to set the virtual lan at high priority...
So apparently Win 7 changes the process priorities for certain apps depending on whether or not they are in the foreground. This is causing problems for me and forcing some of my apps to play catch up once they are back to the foreground.
I've done some research and apparently the OS does this to conserve system resources, which is well and great, but is there no way to lock a process at a certain priority level regardless of whether or not its visible? If not, is there a way to disable this feature entirely?
First off, Windows 7 is very cool; I might use it more than vista now that I got internet for it, but that will have to wait for a month or two. My first question is: when I boot up my comp, and I have to pick either vista or Windows 7 (I have Windows 7 on another partition), I usually leave the room while my comp is booting, so after 30 seconds the BIOS picks Windows 7 as the default OS because its first.
I would really like to boot up my pc while doing something else, and I would love for the BIOS to pick Vista after 30 seconds instead of Windows 7 because I use Vista for games and such. Is there some way of doing that or do I have to sit around throughout the start up and manually pick Vista?
My second question seems a little picky or over the edge, but when I boot up my comp and have to pick an OS, it prints "Windows 7" while underneath it it prints out "Microsoft Windows Vista". Is there some way to add 'Microsoft' in front of Windows 7 when Im picking in the BIOS? It doesn't look as good without the Microsoft.
I suddenly started seeing this ugly font (see images below) on many webpages.I think this issue began right around the time I installed some other fonts, but I am not sure. Initially, I figured it was a Chrome thing but have since confirmed the issue extends to IE and Firefox, leading me to believe this is a Windows issue. By the time I tried to revert the changes via System Restore, it was too late (restore only went back a few days; maybe I need to adjust settings there?).I tried to reset the default font but Windows does not seem to respond to that. When I click "Restore to default font settings" the button greys out but nothing else happens. No dialog box and no change in the issue.
There are still doubts about what the possible and legal upgrade paths are for Windows 7.
Definitions:
1) Upgrade: to move from Windows XP or Windows Vista to Windows 7.
2) Custom or Clean Install: wipes the previous installation and install Windows 7 anew. Does not preserve user files.
3) In-Place Upgrade: upgrades from specific versions of Vista to specific versions of Windows 7, preserving user files and programs.
4) Upgrade version: Windows 7 license for those who own a valid license of XP or Vista
5) Full retail version: Windows 7 license to install on any PC, independent of previous installations or ownership. Can be reinstalled on other computers (when activated the previous installation is no longer valid)
6) Full OEM version :Windows 7 license to install on one PC, independent of previous installations. Can only be re-installed on same computer and hardware setup
Upgrade paths:-
The chart below shows in what situations one can perform an in-place upgrade (e.g. from Vista Business to Windows 7 Professional) without the need to migrate files or programs, and the situations when one needs to do a Custom (Clean) Install and replace the data in the target disc. This is the case for all Windows XP owners or Windows Vista Starter. In this case you will need to migrate your personal files and reinstall your programs in a separate process.
I recommend to use Windows Easy Transfer for this, this program will organize your files per user making the migration easier.
Q.: I have a Home Premium version of Vista and want to migrate to the Professional version of Windows 7. Do I have to buy a full version?
A.: No. If you own a valid Vista license you are eligible to using an Upgrade Version of Windows 7. In this scenario you will need to do a Custom (Clean) install
Q.: I have Windows Vista Business but I don’t need all those features. I intend to migrate to Windows 7 Home Premium. I don’t want to buy the expensive Full Version to perform a version downgrade. Do I have to?
A.: No. If you own a valid Vista license you are eligible to using an Upgrade Version of Windows 7, independent of what versions you are coming from or migrating to. In this scenario you will need to perform a Custom (Clean) install
Q.: I built a computer and want to install Windows 7. I read that you can use an Upgrade disc to install on a blank hard drive. Am I allowed to do that?
A.: If you own a previous version of Vista or XP, even if it is installed in that machine or not, you are entitled to use the Upgrade version. You will need to stop using that license after installing Windows 7.
If you do not own a previous license, it is technically possible to install Windows 7 in a blank drive from the Upgrade disc, but is it not legal, it is a violation of Windows 7 EULA.
Reference: Clean Install with a Upgrade Windows 7 Version
Q.: I have Windows Vista Ultimate 32-bits and want to migrate to Windows 7 Ultimate 64-bits. Do I need to do a Clean install or can I perform an in-place upgrade?
A.: A Clean Install is required when migrating from 32 to 64 bits or vice-versa, independent of the initial and target versions,.
Q.: Is there a way to perform an In-Place upgrade for situations where the upgrade path does not allow it? For example, from Windows Vista Home Premium to Windows 7 Professional.
A.: Yes, you can do that by changing installation files on the Windows 7 package. Only recommended for experienced users and you will be on your own, Microsoft does not support this (although it is not illegal)
Q.: The Windows XP I am running was an upgrade from Windows 2000. Am I allowed to upgrade to Windows 7?
A.: Yes. Your upgraded XP is a valid Windows License.
Q.: I am running the RC, can I upgrade that to the commercial version with an upgrade disc?
A.: Technically yes, the RC will be recognized as a previous OS and the install process will proceed. On the other hand, the RC is a free evaluation version and does not qualify as a valid license for upgrade. You need to have a valid license not to violate the EULA, even if not installed (e.g. the valid Vista or XP you had before installing the RC).
More information can be found on this tutorial: Clean Install with a Upgrade Windows 7 Version
Q.: I recently bought a computer that came with Vista installed. Will I get a free upgrade to Windows 7?
A.: Please contact the manufacturer. It depends on what they were offering when you bought the computer. Here is the list of participating manufacturers, according to Microsoft: Windows:
Q.: I bought a retail version of Vista on or after June 26, 2009, I heard I can upgrade it for free, is that correct?
A.: If you acquire a qualifying Windows Vista retail packaged product between June 26, 2009 and January 31, 2010 you are eligible to receive the corresponding Microsoft Windows 7 product upgrade for the cost of shipping and handling ($9.99). Please allow 6-8 weeks (pending inventory availability).
Q.: I installed and activated the 32-bit version of Windows 7 which came in the retail box. I don’t want to use that, I want the 64-bit version. Can I remove that and install the 64-bit version and legally activate it?
A.: The key allows you to install one instance of either x86 or x64. Since you wiped the x86 you will have one other instance (tks to Garysgold for the info)
Additional References:
Please make sure to read these excellent tutorials regarding installation and setup: http://www.sevenforums.com/tutorials/?filter[3]=Installation%20and%20Setup
This blog gives a good pictorial explanation of the allowed upgrade paths:
Microsoft SMB Community Blog : Regardless of what any hack says, a Windows 7 Upgrade is an Upgrade. What you need to know.