I've been looking to Reset the default windows size and position of WMP12 (in the Center of the Screen without Maximizing) the way it is used to be when we launch the WMP12 after a fresh install of Win 7. I know there might be some way to reset it's default size and postion from Regedit (Just like we can reset the Internet Explorer size and position by deleting 1 binary value from HKEY User/Software/Microsoft/Internet Explorer etc. )
Something I like and can't seem to get Win 7 to do for me. I open a window for my computer, size it and set it at the upper left of my screen. I open folders in new windows; i.e. open the D: Drive and position it next to the window I opened for my computer. Close both. When I open my computer again it is now in the position where I opened the D: Drive. How do I get specific windows to retain the size and position I set each time I open them rather then simply pick up the size and position of the last window I opened?
What is the rational (if there actually is any) of not allowing one to save window size & position (other than the last window opened)?
Without using a 3rd party program (which seems to be the norm with Win7) has someone found a way to allow saving resized windows other than the last window opened??
We are all familiar with the fact that for people who dont use a single window in explorer that windows 7 removed much functionality.Window size, position and layout is not remembered anymore. For explorer and many application windows. I've been using a program called windowmanager since windows 7 was released, but the product only sometimes works and is extremely frustrating to get it to work properly and consistently. Now that upgrades are no longer available to me I'm looking around for something else.I remember reading here a couple of years ago about another product, but I can't find it. Does anyone know of such a product? Was it something MilesAhead wrote?
So. Running XP.2 (can't run XP.3; it kills Adobe's CS2 apps, which I need). Had a spare partition. Before putting Ubuntu back on it, I figured I'd install the Win7 Ultimate that'd come (unused) with another computer.
(The install was smooth enough. The updates were slower'n snail poo. But after turning almost everything back to the Windows Classic theme, it's almost bearable. Only two of my devices were unrecognized and unsupported, and they're no surprise; the tablet's nearly twenty years old (even the manufacturer doesn't support it) and the scanner's older still.)
Installed copies of my must-have software--Office 2003 (I've had to suffer through Office 2007, and will never ever ever put it on a machine I have to work on), Photoshop and InDesign CS2, Winamp .
I got my first real exposure to User Access Levels when, the first time I ran Word 2003, Win7 wouldn't let me save the new Normal.dot. I later went and copied my much-customized normal.dot from its XP location, so the file's at least there. But: I run Word on a portrait-oriented monitor. Under XP, Word remembers the window size and position, and it's exactly where I want it, all the time. So far, every time in Win7 I've opened up an existing document, the Word window has instantly shrunk to around 40% of the size it's supposed to be.
I'm curious if this is a cling-on permissions issue with normal.dot under Win7, or a registry setting that simply hasn't gotten made (in XP, Word seemed to take care of remembering where I put and closed it by itself). Did a search, but didn't see any questions that seemed to relate to this, so I'll ask.
(I'm trying to like Windows 7, I really am. I don't much, but I'm trying. I don't mind the thought of getting a new tablet, and I've got another scanner I can use. But I really dislike having to resize my windows every time I open a document--I spend 75% of my time on the PC in Word, just writing.)
And again, I hate, loathe and despise Office 2007 and 2010. I do most emphatically not like the "death by honey and marshmallows" interface that microsoft seems to think is so great.
Whenever I open Google Chrome, it opens really close to the bottom of the taskbar, and I always have to manually drag it into the center of the screen and maximize it. How can I set it so that automatically opens in the center of the screen?
I tried to download but received a message if I did it would harm my computer. My problem happened when I had a freeze and had to force shut down. When I rebooted my screen came back up about 4 times larger and I can not get it back to normal size. I have tried to reboot, set it back to yesterday. I have checked all the drivers and they are up to date. What do I do now?
I am using windows 7 professorial for my clients . Usually this PCs are connected to Tv Screen that play some media contents .this media needs to be run under 1920x1080 resolution .sometime we my customer turn off the TV , or unplug the cable it reset the resolution to default like 1280x720 Is there any way to "lock" the screen resolution at 1920 x 1080 and not leave this up to Windows ?
I have an HP G60 Laptop, I have made the factory default reset discs, but when i boot the first one up it tells me that my hard drive has insufficient space to perform reset.how to fix this without getting a new hard drive?
I have a dual monitor setup. After making some changes to the orientation/positioning of the 2 monitors, I've noticed that a lot of windows are now partially or even completely offscreen. This is especially problematic with MDI programs (programs that have sub-windows inside them, like Photoshop's dialog boxes and palette panes), as there's no way to interact with the offscreen inner windows and bring them back onscreen.
How can I reset absolutely all window positions of every single program? The registry modifications at Folder View Settings - Reset All to Default fixed Windows Explorer and a tiny handful of other programs, but not even WMP and Notepad were fixed.
I have spent the last couple of hours going through each GPO setting to disable as many features for my kids account on Windows 7 ultimate. I saved the file as kids.msc. The only issue is that I want to be able to clear these settings when needed, so that i can fully access the features. I could not find any options in GPO that allows you to reset the settings back to default...
does anyone here know how to set a default folder size, so that every window opened will display my folders the same size? i like the bigger folders and would like to set it for the entire system, instead of having to continually reset it every time i open a new folder.
I just mess around with IE9 and Windows Live Mail. there's a "reset" button in IE9 that I could reset everything back to factory preset but how about Live Mail?
I've been trying to find a way to change the default icon size in Windows 7. My machine defaults to 'small' icon size, but I prefer the 'large' one, in just about every case. Instead of needing to manually change the size for each individual folder, is there a way I can set 'large' to be the default for all folders? I couldn't find anything in the control panel and haven't been able to find anything about setting a default size yet.
Installed 7 yesterday. All went well. This am window would only open to half size. In Vista we could fix this by opening a link by right click and asking the link be opended in a new window and then X it out. It would then recall that size as the default. This does not seem to work in 7. Simply re sizing it up and over is not working.
I recently did a clean install of Windows 7. I had run into an issue where certain UI elements would ignore DPI changes. Eventually, text looked like this:
Not exactly ideal. I couldn't find a solution, so I was forced to do reinstall. Instead of using my pre-SP1 disc, I created a slipstream DVD. Despite RT Windows 7 Lite giving me an error at the end of the burning process, Windows installed fine... for the most part. See, the default window size is too wide. Whereas windows typically default at something closer to 4:3, mine are closer to 16:9. It's a minor issue, sure, but I'm worried it's a symptom of a bigger problem.
Thinking something got goofed up during the install, I found and applied a registry edit that resets window properties. After relogging, the issue still persisted. Does SP1 use wider windows by default or is there something else going on?
I bought a Windows 8 laptop, ASUS Q500A, and reformatted it with Windows 7. I went into the BIOS and used "Restore Defaults" and now all Boot Option Priorities are deleted. Each time I boot the laptop, it automatically goes to BIOS (or UEFI). I tried inserting the Windows 7 disc so I can access Startup Repair or Command Prompt but it freezes before it could get anywhere even when I tried it with an external CD/DVD drive. I cannot get the laptop to boot to the hard drive or CD drive at all, how I can reset the boot option priorities so it will be boot to the hard drive again.
I'm using Outlook 2010 (MS Office Profesional Plus 2010) under Windows 7Enterprise.When openig attachments (in this case, Word documents) fom e-mail messages in Outlook, the default window size for the attahments is small. Is there some way (registry hack?) to set the default window size for an attachment to an e-mail message?I've tried opening a sample attachment, resizing the window, and closing it by holding down Crtl while clicking on the red "x" at the top right
I recently purchased a new laptop which came complete with Windows 7 o/s. One real problem for me is that the print size on incoming emails and all web sites is smaller than on my old XP o/s. explain in simple abc terms, if possible (I am a silver surfer!), how I can permantely enlarge the print. On XP there was an item to click termed 'increase zoom level' (I can't find something similar on Win 7) but I don't want to be having to do that all the time.
Whenever I play a video file (.wmv, mpg, etc) or audio (.mp3), MP starts out at the last size it "remembered." But when it opens the file and starts playing it, the window gets really small, like a default size and makes it difficult and annoying to re-size it to an appropriate size. Most annoying is MP becomes smaller such that the volume control on it disappears to just being a toggle for mute. Is there any way to change the default size of MP?
I changed it was because I tried to optimize (my mistake) by reducing it. My router is set to 1365 MTU manually after a support tech from Linksys asked me to change it for a previous problem. I used the "netsh interface ipv4 set subinterface "Wireless Network connection" mtu=nnnn store=persistent" command to change it around to find what MTU Windows uses automatically. It was set at 1500 (for both LAN and WLAN). I set the WLAN to 1365 to see how it would perform, didn't see a noticable change I believe so I switched back. Now I see a slight lag when loading sites. I also compared the time against another pc that I did not tamper with (which by default was set to 1500) and that one worked normally.I fear I may have overridden Windows defaults for handling MTU since after manually setting it to 1500 (was originally 1500 when it was untouched) it lags a little. For the time being I set it to 1365 to get the performance that I normally got with default settings.
My question is if it's possible to get the original performance back with the MTU set back to what it was originally (1500)?Also I learned my lesson and won't be trying to change settings without first making sure they are completely reversible. Also I'd like to do this without using System Restore.
I have a laptop that i often connect to a tv screen. When i am just using the laptop screen i keep the dpi value to its normal default setting, but inceease it when i connect it to the tv so things are easier to read. When i disconnect from the tv and go back to the laptop screen everything is too big bevause of the increased dpi,i set it back to its default settings.However when i do this everything is rediculously small and sometimes impossible to read. Even setting a larger dpi from this point creates text that is too small. I cant go higher from this point because it also makes my windows too big. Does anyone know how i can get back my normal text size with a default setting of 100% dpi?
Here is an image of my desktop. The gadget size is big, the taskbar is big, the close restore minimize button size is big, how should I restore them to default size?
I suddenly started seeing this ugly font (see images below) on many webpages.I think this issue began right around the time I installed some other fonts, but I am not sure. Initially, I figured it was a Chrome thing but have since confirmed the issue extends to IE and Firefox, leading me to believe this is a Windows issue. By the time I tried to revert the changes via System Restore, it was too late (restore only went back a few days; maybe I need to adjust settings there?).I tried to reset the default font but Windows does not seem to respond to that. When I click "Restore to default font settings" the button greys out but nothing else happens. No dialog box and no change in the issue.
Now, just 3 days ago It started the BSOD issue.I realize that my GPU was the cause of this issue. When playing games or open 3d applications the temp goes 30C to 72C (In 15 seconds) then 82C - 85C constant (in about 30 seconds).Now I've been using MSI afterburner to check my temps and at fulload my GPU will be at 62-72C max temperature but now it's 10C even higher then before. No, I haven't fiddled with the voltage I set the GPU voltage to 1.037v which is the safest (been running this almost 8 months!). The GPU is the GTX 560ti.Is there a way to set the GPU on default settings or reset GPU settings in cmd or other professional way. I have uninstalled the drivers, uninstalling GPU, disabled GPU, disabled PCI-E slot and so on by using device manager and the issue still persist. Yes, I also have clean the GPU perfectly and still the temperature goes up to 82 seconds at 30seconds-45seconds. Yes, I have checked everything is set correctly and so on, I am a PC Tech.
Is the GPU damaged? Yes I have looked at this thread: Stop 0x124 - what it means and what to try Mainly, I know its the GPU straight away, I tried checking old drivers, new drivers, another GPU overclocked software such as GPU tweak and EVGA Precision. I am thinking it's the GPU is damaged or the PCI-E is damaged (I have another PCI-E slot on my system and the issue still there). It might be the PCI-E frequency? but it's set to 100 which it meant to be, I just hope is software related because I don't have the money to buy a new card. Did the dump files help?
