Dual Boot With XP Doesn't Provide Option
Oct 26, 2009
I created a separate partiton and installed Win 7 fine. It dual booted fine as well. I then renamed the old XP boot partition and this caused the PC to give NTLDR missing and wouldnt boot.
So I reinstalled Win 7 as a custom install and it all boots fine into Win 7 without providing me a dual boot option. I am not too concerned about this as eventually I was going to go completely over to Win 7 anyway
Question I have is
1) The old Win XP boot partition is viewable in explorer. Can I just reformat this and reclaim the space - I want to make sure that the PC is not looking for any files in that old partition
2) Can I delete the Windows.old folder as well
View 9 Replies
ADVERTISEMENT
Jun 17, 2011
i have both linux and windows 7 with dual boot and after reinstalling windows 7 the boot option about linux does not appear .it boots only from windows...i can fix this only by making anither partition of ubuntu for example and then everything is ok..but i have one exta partition that i dont need.
View 5 Replies
View Related
Aug 26, 2011
i have windows xp as my primary boot windows and windows 7 as my secoundary windows ,xp is on c drive and 7 is on d drive my windows xp create a problem so i install a fresh a copy of xp now my xp is working properly but dual boot option is missing that shown on startup
View 2 Replies
View Related
Nov 24, 2009
When my computer wouldn't turn on in the morning I did the usual diagnostics; unplug things one at time test with spare components etc... Any way I qucikly figured out the PSU was dead so I ordered a new one and was back up and running. However when I reassembled the computer after unplugging everything (and removing the m/b) I plugged the HDDs back into different SATA ports from which they orginally came. When I came to boot the computer up I got the error message: 'BOOTMGR missing' or it may have been 'NTLDR missing' I can't remember.
I fixed this problem by using the 7 startup repair utility. I have no problem booting into Windows 7, but I have lost the option to boot into my XP install on anther disk. I looked in the boot tab under System Configuration and the only OS showing is this Windows 7 install. So my question is this: how can I get the choice of which OS to boot back?
(I should mention that the XP install is on a different disk from the 7 install).
View 3 Replies
View Related
Jun 9, 2009
I've installed 64bit win 7 on a 2nd partion of my main drive running vista 64bit. The installation all went smoothly and loaded into win 7.
But when restarted I did't get a windows boot manager screen so i could pick if I wish to load Vista or Windows 7, instead my system just loads straight into Vista.
Do I have to enable my system to be able to see the Windows 7 install?
View 3 Replies
View Related
Oct 30, 2009
I have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
View 9 Replies
View Related
May 12, 2009
I just installed Windows 7 as a dual boot with my XPsp3. Now my Logitech Revolution VX mouse has lost all its special functions, and the Setpoint software in unable to work properly.
Any thoughts? The same thing happened when I set up Ubuntu as a dual boot - finally removed the linux.
View 0 Replies
View Related
May 3, 2012
I recently purchased this computer used. It has windows 7 ultimate (32-bit) and the computer is a custom build I think. Anyway, the option to "sleep" is there, but non-selectable. I think I've encountered this before and I installed a driver or something and it was fine. Also, the desktop themes are limited; I can't customize the aero window/taskbar theme..
View 10 Replies
View Related
Aug 26, 2011
My desktop with Win 7 Prof lets me see a Library with all my photos (in my Pictures folder), all neatly laid out in order of Date Taken.My new laptop simply says New Library when I click Windows Explorer and it appears empty.However, it tells me that MY PICTURES are already in a Library, but I simply can't find it and view all my pics.Additionally, there doesn't seem to be a DATE TAKEN option visible (although I have seen it somewhere!), instead it's DATE MODIFIED or something similar.
View 9 Replies
View Related
Apr 7, 2011
i have 2 23 inch acer screen. one hdmi and one vga..i have the "turn off display" set for 15 mins but it seems the hdmi (which is the main display) only turns off as the second screen stays on.i know i can just turn off the second display with WinKey and P but sometimes i have to rush out and have work up on both screens
View 9 Replies
View Related
Mar 9, 2011
I have no choice but to try and load a program onto my Windows 7 machine that only has WinXP compatibility (well not 64-bit Windows 7 anyway) It is Samsung PC Studio for what that is worth.So my plan is to load it in XP compatible mode . The thing is there sem to be 2 parts to the program .1 is the program as such and the 2nd part is the usb drivers. I understand the procedure is to find the application file ,go to the compatibility tab and select WinXP.So my question is how do I know which are the right applications to change in this way? When I go into the folders there are quite a lot different ones . Is it really as painstaking as it seems ? I don't think when I just load the CD I am given an option to load in XP mode and when I click on the CD itself there doesn't seem to be an option to change all of the contained applications to XP compatible. Again I think I may be able to run the whole Win 7 operating system as WinXP but this seems like overkill
View 1 Replies
View Related
Sep 12, 2011
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies
View Related
Jan 14, 2012
I am trying to install a password recovery cd on laptop. I changed the order in bios but still not giving option too boot from cd. I even logged in as a guest and put an audio cd in .It didnt give option too play. I think its the cd drive. What can I do?
View 1 Replies
View Related
Feb 4, 2011
dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies
View Related
Nov 12, 2009
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
View 9 Replies
View Related
Jul 4, 2009
I had winxp sp3 and Windows 7 7127 x64 on dual boot (xp on c:/ and 7 on d:/)
I replaced xp sp3 with Windows 7 7264 x86 ...at first I couldn't login to Windows 7 7127 because the dual boot seemed to be gone. I fixed it using easybcd so now I have dual boot again for 7127 x64 and 7264 x86 .
The problem is that now when I boot 7127 it has a vista boot screen (probabbly because of easybcd not having a Windows 7 option). How can I change it back to the Windows 7 boot screen? Does anyone have any clues?
View 3 Replies
View Related
Feb 23, 2012
Compressed C: and my battery on my laptop died while this was compressing. Turned laptop back on Got the error:Bootmgr is compressed..The problem I'm having is that there is no option to boot from CD Drive. My CD drive is listed in my BIO's but when I go to boot options only my HDD is listed.
View 9 Replies
View Related
Jan 20, 2012
why my pc is not showing boot from cd option in boot time
View 1 Replies
View Related
Aug 11, 2010
I have 3 drives, C:, D:, and E:. E: is just a storage drive. XP was originally installed on the D: drive. I installed Windows 7 on the C: drive following the instructions at Dual Boot Installation with Windows 7 and XP. After installing Windows 7, I didn't get an option to boot XP so I used EasyBCD to add an XP entry to the boot menu. That worked, but after I boot into XP, if I shutdown or restart I get an error message about the Windows Boot Manager that says
"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem
...
etc
...
File: ootcd
Status: 0xc000000f
Info: an error occurred while attempting to read the boot configuration data."
Then I have to run startup repair from the Windows 7 disk. But then I just get stuck with Windows 7 and no boot menu entry for XP. If I try EasyBCD again, the same process results.
View 4 Replies
View Related
Jul 18, 2012
I am attempting a reinstall on a Toshiba satellite C655, my problem is the DVD/CD player is broken, and when I hook up an external USB DVD player and set boot options to USB, it won't recognize it and bypasses to start up screen. Am I missing something in BIOS?
View 4 Replies
View Related
Jan 6, 2009
I'm using the Windows 7 - 7000 build too.
Well, I have some questions... first, regarding the boot screen when I turn on the computer. I've installed Windows XP SP2 this way: Deleted all the partitions on my hard drive, then did two partitions from the installation program of the CD, then I installed Windows XP in one of the partitions, then I installed Windows 7 in the other partition.
So, I have two SO's running, but, when I turn on the PC only stars with Windows 7. There is no OS selection screen at the very beggining. What could be the problem?
Second, and regarding with graphics. I'm running Win 7 in a HP 530 Core 2 Duo 2GB RAM and this: "Intel Graphics Media Accelerator 950, up to 224-MB shared system memory". When I turn on the slideshow as a Desktop Background, sometimes I see weird lines and the transition is not as smooth. Also, I've installed Warcraft III Frozen Throne and when I play, I see some dark flashes and lines.
This happens because of the "beta" not handling well the GMA 950?? I'm using the drivers that came on with the Windows 7, however, I think I've updated them via Windows Update since it seems that HP and Intel are friends with Bill Gates.
View 9 Replies
View Related
May 23, 2012
My laptop recently just will not start from any boot option I select, it always freezes and when click system restore all that loads is a black screen with a cursor, other than that every other option from the boot menus I select fail too.
View 9 Replies
View Related
Jul 31, 2010
I have installed Windows 7 and then I installed Linux on an other partition of the Hard Disk now I wanted to install windows XP for some project work, I removed the linux (ubuntu) and installed the XP on the same partition. The problem is that I am not able to see the option to boot Windows 7.
View 5 Replies
View Related
Sep 25, 2012
I have ASUS PC (model: P5MG-ZX). I want to install windows 7. How to make a proper boot setup. I tried many times but failed to set my boot setup. I tried to install windows through USB but pc starts normally. It's not showing me the option "press any key to boot from CD/DVD".
View 8 Replies
View Related
Jan 6, 2013
i have tried boot from cd option from bios but nothing happened the option boot from cd does not when i tried to install windows 7
View 2 Replies
View Related
Feb 12, 2013
I formatted the drive that i had installed ubuntu on (it was installed in windows, not in a separate partition). But it still gives me the option to boot into ubuntu when i start the computer.
View 7 Replies
View Related
Jun 30, 2009
I installed Win 7 sometime around Feb, a dual boot with Win XP. But when I upgraded Win XP to Vista, the option for Win 7 disappeared on the boot screen, and the system would boot straight into Vista. So, I used the Startup repair option from the Win 7, and after rebooting it showed the boot screen with W 7, and Vista. But, after I "repaired" it, Win 7 seems to have lost the Win 7 startup screen. It now shows the "Starting Windows" from Windows Vista, then the Win 7 "welcome" screen.
I realize it's not much of a problem, but is there any way I could get the Win 7 startup screen back?
View 1 Replies
View Related
May 8, 2009
I had Windows 7 7057 & XP running Fine, Dual Boot was working fine
On The Same Disk but different partition:
c: / Windows 7 7057
d: / XP
To install the Windows 7 RC 7100 i've formatted the c: partition and installed on it.
No problems at all during installation. Windows 7 RC is running Fine.
XP is lost, so i've tried to add it to the boot options using EasyBCD 1.7.2, FAILED. Then running as ADMINISTRATOR bcedit.exe:
i've done this:
Heres my boot "overview" takem from EasyBCD
bcdedit /create {ntldr} /d "Windows XP"
bcdedit /set {ntldr} device partition=D:
bcdedit /set {ntldr} path
tldr
bcdedit /displayorder {ntldr} /addlast
When i restart the Boot options appears Windows 7 and Windows Xp
But when i choose the XP option and Hit the enter key, the system immediately restarts.
View 6 Replies
View Related
Oct 2, 2011
Occasionally, as this PC is booting up, it asks if I want to Start Windows Normally. I press enter for this. However, if I don't do anything, because I am out of the room, it still goes ahead after 15 seconds. In this case, though, I can't operate any of the programs that come up on Windows 7 home edition. When I click on my Firefox browser for example nothing happens. I then have to reboot the PC (switching it off and on) and make sure I'm in front of the PC to press enter when this message comes up. Then all the programs run as normal. Is there any way of stopping it asking me?
View 9 Replies
View Related
Jan 2, 2010
I have Win XP 32 bit on my old drive. I buy Win 7 full retail and a new HD. I set bios to boot from cd etc. Win 7 starts up. It shows the 2 drives, so I select new drive...no problems. It starts install. I leave it to do its stuff.When I come back its up and all ok.I dint get any option to boot from XP. The drive was listed as "SYSTEM" but not old Windows or anything.
Also ASUS chipset drivers dont work and they were listed as 7 drivers.I tried Vista drivers but it normally shuts down and restarts. Nothing.
View 9 Replies
View Related
Apr 16, 2012
My old monitor has problems turning on, I can leave it on for 30hrs before it decides to display a picture, or I can manipulate it by unplugging the DVI cable from the back, but sometimes even that takes a few tries. It's off warranty and for reference it's a Samsung SyncMaster 226BW.So I bought a new monitor and I have it plugged in using HDMI, but a problem I get is that when both monitors are plugged in the HDMI has no display until it gets to Windows, so I cannot see the boot process of my PC, because my old monitor as explained above has problems turning on. Was a hindrance today when I was tinkering with my SSD and had to go to BIOS, and frankly I'd like to be able to see in case anything goes wrong, like a BSOD or Windows update etc.
View 5 Replies
View Related
