After installing Windows 7 Ultimate 64 bits, I used the option "system image" from Windows. It burned some folders and files on a DVD. Then I begun with try/error to install older software and hardware on Windows 7 or on XP mode to have an idea how this works. Now my windows is a mess. I would like to restore that image to my HD and install only the software/hardware that I learned, will work. Does it work like the Partition Images made with Symantec Ghost or Acronis True Image?
I have a windows 7 64 bit.I'm using firefox 18.0.2 and when I try saving an image the only libraries I can save to are Documents, Music, Pictures, Videos.There is no Desktop option.If I want to save to the desktop I have to go all the way to "C:UsersJustinDesktop" I can't just click "Desktop" and save it like I can with Music, Pictures, etc.
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I am attempting to run a complete system recovery (factory restore) on Windows 7 using a recovery partition. Last time I ran the recovery, I ended up having a lot of problems with system programs not being installed correctly, and with the system administrator account. Now, when I reboot and use the F8 option to bring up the boot options, I do not have an option to "Repair your computer" as I had before. I also tried rstrui.exe through the command prompt, but it only tells me that "No restore points have been created on your computer's drive. To create a restore point open System Protection."
I also checked my drives through DISKPART to make sure there were no problems with the recovery partition, but it is showing up normal. On the Windows knowledge database it said that if the system recovery options are missing, then the system is not installed with the options or they were disabled by the network administrator. Given that I had no problems accessing these the last time I ran the recovery, I'm assuming something happened with the account. I am set up with 1 user in the system, which is the administrator.
1) Re-enabling the options so that I can access the "Repair your computer" options on the boot menu.
2) Run the system recovery options without having to get into the bootup menu.
The start up repair can't fix it and I noticed that in system recovery option, the operating system says" Windows 7 on (D Local Disk" does that mean the windows directory transferred to Local Disk D? And another thing is that I can't boot the pc in cd/dvd, when i click f8 and click the CD rom the message" press any key" won't show?
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
Good Evening Windows 7 64 bit Internet Explorer 9 Today I done my firstsystem back up I used the image back up because it says it copies everything insystem including program and drivers. My C drive is 500 GB. I am backing up to aninternal hard drive. I had 170 GB to be copied but when it finished it onlyshows to be 43 GB. On the hard drive also when I put the backup DVD disk in therom and go to properties it shows ZERO on the disk. You can look at the backside of the disk and tell something has been copied to it can someone explainto me where I went wrong. I am using an internal 1 TB hard drive to back up to.If the 43GB back up is correct how you can verify that it has copied all 170GB. According to Windows help section you need a hard drive of at least thesize of your original C drive.
Been awhile since I've been around here. I'm stuck with a new problem. My desktop's OS hard drive crashed/is crashing. After testing several pieces of hardware and reseating numerous items, I got lucky and was able to boot into safe mode, once. My event viewer is full of disk errors. Pages and pages of disk errors. *Side note: Sure would've been nice if Windows would have said something */End Side note* So I have a Windows System Image and Windows Backup on a secondary drive that appears healthy. But I'm just curious what I'm looking at when my new hard drive gets here.Has anyone ever used the Windows 7 Image Backup/Restore utility? Can you use the image on a different hard drive or just when repairing the original? Will my programs be saved or just data? Just curious questions. All of my Google searches are bringing up reviews about the utility from the Win 7 RC days so I'm not real sure what I'm getting myself into here.
i have recently taken a system image of my entire system,using Windows own.Ä° would like to hear from anybody here,who has done,the same,AND restored the image successfully
I have a Dell XPS 17 laptop that has dual drives - c & d.The c drive crashed and was replaced by dell.We are now trying to do a system image recovery from the d drive.We are following How to do a System Image Recovery in Window7 from seven forums.com.url...After Selecting the System Image from the D Drive (STEP TWO, # 5 and 6), the computer prompts to create a repair disk.The only way to move forward is to create or not create the disk.In either case, it then has you restart the machine, takes you through the process again.. Step 5/6.Never gets to Step 7 to actually DO the System Recover.
I am going to upgrade to Windows 8 Consumer Preview, so before doing so I backed up Windows 7 as a system image to my external hard drive. In doing so, I forgot that a system image includes all the files on the drive, which means it backed up about 700 GB worth of data. That's OK except I already had those files backed up individually, so now my external drive is basically out of space for future use. Instead, what I'd like to do, is do a system image of factory state without having to lose the files already on my drive. Is that possible? I could always go back to factory condition, and save the system image, but then I'd have to re-add all my programs and files after I get the Windows 8 upgrade completed. I'd rather not have to do that unless it's an emergency.
i just ran the Windows 7 systems image bu first time. completed and created recovery disk. message said completed.when i look at my external hard drive, the created file contains 0 bytes; this doesn't seem right to me based on previous imaging software I have used.
Using win 7 backup, I want to backup up my ssd (now its in full go). Where is the best place to back up? I have a 500gb hdd with my docs on (was my old C drive etc) is it best to back up here or to an ext hdd? Also just in case of failure I am thinking of backing up the hdd with my docs on. I have acronis true image but would rather using windows system image, because once I've done a clean install to the SSD I can restore using the system image.
I am trying to do something very similar, but not quite exactly the same as here. I hope that there might be someone here that has some tips that would be useful to what I am trying to acheive.
I just got a new system running Windows 7. I bought the "professional" version of Windows 7, so that I would be able to run "XP only" programs. I have some old software from companies that went belly up and no longer provide support. I was told that the professional version would run these programs, but I guess I didn't do my research well enough. They are not compatible.
What I would like to do now is run a dual boot between Windows 7 and XP. The difference in my case is that rather than doing a clean install of windows XP on the new partition, I would like to restore an image that I have of my old computer's drive (running XP) to the new partition on the new system (running Windows 7). Restoring to a new hardware environment shouldn't be a problem in theory, since I am using Acronis True Image Home 2011 with the add on that facilitates this.
I am assuming that the process would be the same, up until the point that the directions here say to insert the CD to install windows XP.
I recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use this image to put everything back exactly the way it was before?
I have a 1TB drive that partitioned with 120gb system and rest is a non primary/non boot data partition volume... I've never used windows 7 create system image, but want to. When I try to create a system image it insist on backing up both drives. I don't see how to deselect the data drive. Is this because I have installed something system related. on the data drive? And Finally, how will recovery of a system image works if I get a blue screen, do I need to install windows 7 again first or have a repair CD? I noticed when I started a create system image it asked me for the destination drive, no exact path on the drive, does the image have be created on the root of the destination drive?
Replaced my HD and used my Win Image BU, but Win will not start. I get the Dell screen that says Windows is loading, but then it is a blank screen.I did a second restore with same outcome. I followed System Image Recovery exactly, but cannot get that last screen to restore files I have booted from USB and from the boot disc - same results.
I took a windows system image (on anexternal HD) but then now I am not able to login into any of my user acct including admin. I tried entering my password but it keeps telling me incorrect password for both of my accounts.I have Acer windows 7 home premium laptop. Now I am completely locked out of my laptop. When I start my computer it comes straight to the screen when I have to selecta user account to enter my password. I have an admin account andthe other as normal user.
I think I have some kind of malware. I am unable to use many functions on my computer, I always get the same error message "C:windowssystem32 strui.exe. The system could not find the environment option that was entered." I can't open system restore, because I get that same error message. I think its any .exe operations that I cannot use. My malware program won't open normally but when I tried it in safe mode, it didnt find any problems.
I also tried system restore in safe mode and from the boot screen, and it told me system protection was turned off, so I tried to turn it back on and the security tab that was needed to do this was missing. I don't have the windows 7 install disc because it was a factory install. I can't install any new programs and now I keep getting error messages saying I may have counterfeit software. In the bottom right corner of the desktop it says "Windows 7 Build 7600 This copy of Windows is not genuine".
I am attemptin to make a backup image of my hard drive. The new Image will be complied on an external hard. The drive has a 1TB Capacity with 450 Gigs free. I am receiving an error code during the image compilation stating that there is a problem with the I/O device. I ran chkdsk and found no problems. I also switched USB ports just to rule that out. I have used this same external hard drive to image a different laptop with no issues last week. My next approach would be to try this in safe mode. When I am in safe mode, I cannot find the location of the software which windows uses to create the image. I typed the location into the address bar and it pulled up a link in the address bar which took me back to the control panel. Can anyone tell me if this is possible to do in safe mode and if not, what my next step would be. Windows error: The Operation failed due to a device error encountered with either the source or destination. If the source or destination volume is on a disk, run CHKDSK/R on the source or destination volume and then retry the operation. (0x8078012D) Additional Information: The request could not be performed because of an I/O device error (0x8007045D)?
I have a system image created in Vista with external, internal hard drive is done. i replaced internal and installed windows 7. Can i use any of the information from this system image backup? Is there anyway to read the drive and pick out some of the important files? i don't need the whole system restore but would like as much of the old info as possible.
I have 3 identical PCs with 2 partitions: C and D.I created a system image for one PC, C only.But when I restore that system image into the other 2 PCs (using Wind7 DVD), it formats both C and D and restore.The problem is that I have data on D and I don't want it to be formatted. I only want to restore the C image.
My laptop has been backing up once a week fine (except for an error about a missing file that is on the target drive, not the backup drive) for months. In the past few days, it has suddenly failed with repeated attempts to backup, it always stalls at 57% while creating a system image. I've tried a clean boot, same results. I'm backing up to a network drive (USB hard drive attached to the router), 274GB free of 458 total, and the total backup size has been pretty small as no heavy data is kept on the computer.
I have a system image on my external HDD made by Windows 7 Backup & Restore utility on my old computer. Now I am using a new machine and would like to delete my old system's system image but do not know how to properly do so.
Since I have not ran a backup yet on my new machine, there is not option for "manage space" in the backup & restore utility
i been thinking of upgrading to windows 8 but i might have to go back to windows 7 if things don't' work out as its a possibility.my question is if i return to windows 7 will making a system restore image install all my drivers i need once i go back to windows 7 going back to windows 7 with re-installation DVD
I recently had a really annoying virus which would not go away, after 7 days of fighting with it I decided the best course of action would be to format and reinstall win 7. However now my PC is super slow, I cannot open desktop items, without right clicking and selecting "Run as Admin" and even that is really slow. If I right click and select "Personalize" it hangs for ages then says "Server Execution Failed".
i have an m17 r2 alienwAre laptop.in the bios menu the sata option HCAI is selected but when the comp boots it says no operating system is found when booting for bios sata option RAID it runs fine. But the comp should be on HCAI in order to run features that a specific to that computer . I have tryed reformatting but in HCAI it on finds the second of 2 500g hard drives but the partition with the boot is on hdd1 not hdd2 . Boot up again with RAID it finds both and and I can reformat have tryed to reset the registry and have tryed using drivermax to find out if I'm missing sata drivers I've also tryed reinstalling my bios from the dell
After restoring my pc from a system image, when windows resarts, it won't boot, & I'm taken to the "startup repair" option screen. After Startup Repair is performed I get the message "Startup Repair Cannot Repair This Computer Automatically" with the following problem details:
Problem Event Name: StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown Problem Signature 04: 52 Problem Signature 05: AutoFailover Problem Signature 06: 1 Problem Signature 07: BadPatch OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033
It says that the root cause found is "A patch is preventing the system from starting" Error code = 0x490.
I created a system image on an AHCI system, then I replaced the hard drives & re-imaged the system. Now Windows won't boot in AHCI mode, it has to be it IDE mode. Why is it not booting in AHCI mode?
