Run A Windows 7 Repair Disk That Was Created On A Different PC?
Dec 17, 2012
I have an issue with my desktop PC. I believe I have a corrupted system file since the HDD is no longer bootable; however I have been able to remove the infected drive and install it as a slave on my HTPC. This has allowed me to backup all my important files.My question... I'd like to run a Repair on the existing Windows 7 install but I never created a rescue disk when the OS was operational. Can I create a repair disk using my Windows 7 OS off the HTPC and run it over my desktop PC? Or is the disk specific to the PC the OS belongs to.
My laptop is 6 months old - sony vaio. Do I require to create System Repair Disc? I have taken back up in external hard drive. Also have created windows 7 backup in three separate DVDs.
I have 2 laptops. One, a Sony Vaio has a working Windows 7 home premium OA 64 bit. And another Toshiba Satellite that HAD Windows 7 home premium OA 64 bit. The hard drive in the Toshiba went fubar and is unrecoverable. None of the sectors are readable except the partition table and SMART says that drive failure is imminent. I installed a new blank hard drive in the toshiba.Can I use my Vaio Windows 7 to get this Toshiba Windows 7 working somehow? I created a repair disc on my Vaio but I don't know what to do next for the Toshiba. No the Toshiba does not have any backup recovery disks made from it but I can make whatever discs with my Sony Vaio. I have not done system recovery on windows since the old NT days. It looks like MS made this harder than it was. All I had to do was use my install disc.
I installed win 7 Pro on a new build: Gigabyte GA-P55-UD7 + i7875 + 8Gb Crucial DDR3.Made system backup and created System Repair Disk. A few days later (and a few backups later as various software loads were made) the system crashed while I was attempting to email photos from Picasa via its link to Outlook 2007 Screen went blank and on restart neither normal nor repair start worked (latter recycled to POST continuously).So, got out the repair disk, made by this system earlier - and after keyboard choice it tells me that the "repair disc created by win 7 64 bit not compatible with this system".
This maching was turned off and unplugged while owner went on vacation.On return it just goes to the auto repair parocess every power up.Went to DOS prompt and the drive with windows on it was given the letter D, the system partition was given C.I tried bootrec /rebuildbcd and /fixboot to no avail. Then I assigned the windows partition to C and the system partition to D and tried again to no avail.I have removed this drive and scanned it on another PC as a secondary drive and found nothing other than cookies with Malwarebytes, SuperAntiSpyware as well as nortons. I also looked for rootkit with TDSSkiller. After renaming cbs.log I looked in D;windowslogscbs after doing a sfc /scannow process for the repair log and there was none created. I looked on the system boot drive "C" but of course there was no windows folder so I created a windows/logs/cbs folder to see it it might be created there, it wasn't.This appears to not be due to a bug but maybe a shutdown while it was in hibernation or something like that.
I have been trying to format a partition I created on my harddrive for my laptop. I booted from a disk into a program called GParted (live CD version). I used this to format the partition I created. Then, once I had finished attempting this task, my lack of expertise in computing took it's toll. I chose the option to create a disk label on the partition. I mistook this operation for something innocuous. It gave me a warning of some sort, which I ignored since I didn't think would be a problem since the recently formatted partition would be empty. This operation took a few seconds (30 or so) and once completed the drive map above said 685 GB unallocated space (or the size of my entire hard drive). I was very scared at this point so I restarted my comp and booted to hard drive and all I get is a blank screen and a mockingly blinking cursor. Now I am trying to see what my factory recovery disk can do for me. Using the windows recovery console I have attempted to repair this. Looking at the details, it runs a few tests. then sees that there is no valid partition, and tries to repair the partition. I restart and nothing has changed. Reattempting the repair just does the same thing and doesn't have any visible affect. Although it looked bad at this point there is some good news. In the recovery console I have attempted to load drivers from the other recovery disk. When the window opens to browse the disk I am able to navigate to the other drives (that I thought were gone) and it seems that all my system and personal files are still intact. I rebooted into GParted and it seems that the original hard drive is visible again and intact. However, I still can't boot!
I do have one option that is unnattractive to me. I have considered reinstalling windows to the partition I created, then once in the OS I could backup all my files to an external device, then redo everything from scratch. However, I am concerned that in the process of installing Windows 7 that I might everything for real. Maybe someone could affirm or repair my paranoia about this? However, I don't want to do this because I have been setting up this laptop for the last 2 weeks and I really don't want to spend the next 2 weeks doing it all over again (although it wouldn't be so bad if i could recover all my downloads and personal files).
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
I installed MagicDisk awhile back because I was trying to mount a copy of memtest. Anyways, I ended up uninstalling MagicDisk, but the virtual cd-rom drive it created stayed behind.However, every time my computer either boots or even wakes up from sleep mode, windows automatically reinstalls the drivers and re-enables the virtual cd-rom drive. where to find the registry files I have to delete to tell my windows installation that I don't want that drive anymore?
After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
I am now trying to use another persons windows 7 home premium disk to reinstall my operating system because my computer only came with a partition devoted to windows 7 installation and has errors which must be the reason that my sfc /scannow has never worked.Now my question is this. This disk from a friend of mine is probably pirated as it is just a silver verbatim dvd that has windows 7 home premium written in blue highlighter.What I want to know is will this override my real version of windows that came with my pc
today i found that my windows 7 64 bit ultimate os was unable to boot.after many restart finally i used my system repair disk. disk did work and i m able to boot nowbut can anyone give me some insight about what went wrong in the first place. just dont want this type of problem in the future.
I think I must have lost Windows Installer using Revo uUninstaller and messed up the registry somehow. I'm a bit afraid to use the Win 7 repair disk 32 bit I created; I might mess things up further. I've tried to download a 32 bit installer update to no avail; it says it's not compatible with my version of Windows (Professional, SP1). Anyhow, does the Win 7 repair disk have a fix for the lost Win 7 installer? If so, I might give it a try if you can provide some guidance in doing so. I have everything backed up in Carbonite, Seagate external drive, Acronis True Image, memory sticks, etc.
We just acquired a new laptop with Win7 HP preloaded. One of the first things I did was try to make a System Repair CD (Start/All Programs/Maintenance/Create a System Repair Disc). The CD burning process seemed to go normally. When I tried to run the disc, it seemed to load normally until it got to a screen with the "streaks in the sky" wallpaper and then it stopped. There were no menus, messages, or anything except the wallpaper. I made two discs using a name brand with the same result. I know disc quality used to be an issue but I didn't think this was so these days among the name brands.
When I recently tried to boot up my system all I could get is a blank screen. Tried to boot up using Windows 7 repair disk but it goes into a loop at the "starting windows" screen consequently won't boot up for me.
I have a Asus K52F laptop running Windows 7 64 bit. The laptop did not come with a Windows 7 recovery disk. Can a Windows 7 64 bit recover disk be created? When I use the term "recovery disk", I do not mean "repair disk". I already created a repair disk. But my understanding is that the repair disk can not be used to reinstall Windows 7.
Well I have been trying to fix this error for hours And after the system recovery scan it says there are problems with my start up options but I cant hit those buttons because the s2 keyboard I have in simply wont let me. Secondly I have ran the repair tool but it says I have to manually fix this problem so I tried using the command prompt but to my great luck again I cant get to that option because of my keyboard so I think the real question here is what do I have to do to my keyboard to land over all of the settings?
i bought this new VAIO laptop, and i want to repair it but when i bought the laptop the store didn't give me the Windows 7 disk but i need to do a complete repair. But this computer also have This VIAO Factory restore setting which restore it to the original factory install software, should i use this option or something else?
I've got a CyberPower desktop computer which has worked great for over a year now. I was having some problems with my hard drive and so I started to attempt to improve it by first doing a disk check and then disabling some programs launching when the computer starts, making sure not to touch the Microsoft ones. Now when I start my computer I'm greeted with a message from the windows boot manager saying "Windows failed to start. A recent hardware or software change might be the cause" the status is "0xc000000f and the info is "The boot selection failed because a required device is inaccessible". The major problem that I'm having is that when I put in the CyberPower disc which contains Windows 7, it seems to just ignore it! What can I do?
-Product: Sony VAIO factory install Win 7 (x64) -Issue: windows failure / factory restore attempted and failed / Win will not load -Other: purchased Win 7 repair disk via C.Net on my IPhone -New issue: transfer said files using "Win system recovery options via USB
getting a USB mouse or keyboard to work while using a Windows 7 system repair disk. My USB mouse seems to mostly be the problem. The keyboard works most of the time, so why doesn't the USB mouse work
Randomly, my computer is no longer able to boot from my OCZ Agility 3 SSD. By randomly, I mean it was working just fine this morning, but no longer. I can't remember if I changed or updated anything.
Well I then went and inserted the Windows 7 repair disk. A list pops up saying to select my OS, but nothing is listed. I selected load drivers, and I'm able to navigate to the ssd successfully and view all of the files. I even plugged it in to the computer I am using now and was able to back up the more important documents in case I will need to do a reinstall. (I would rather not though).The repair utility doesn't fix the problem, and I navigated this forum and many others trying to find similar problems to mine.
Windows 7 Ultimate 64-bit AMD Phenom II X4 965 Galaxy GeForce GTX 460 16 GBs Corsair RAM
I do have two other hard drives on the system that I use for general programs and another for raw video storage.They are disconnected now, so I don't see how they would affect the problem.
I'm writing about my brother's Samsung R780 laptop (running Windows 7 64 bit), which recently stopped working. When he starts the computer, he gets the following error: "Windows Error Recovery." Searching around online led us to create a system repair disk on my laptop (which also runs Windows 7). When we boot with the disk in the drive, a prompt asking for our language (which is greyed out so we can't change it) and our keyboard (which we can change) appears. Without changing the keyboard option, we press 'next' and then it freezes. We've also tried the 'repair your computer' option in the Advanced Boot Options, but it also freezes.
Here is a summary of my problem: 1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot. 2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed. 3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more. 4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERSCLASSPNP.SYS" 5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline Problem signature 01: 6.1.7600.16385 02: 6.1.7600.16385 03: uknown 04: 21201099 05: AutoFailover 06: 2 07: Corrupt Volume OS Version: 6.1.7600.2.0.0.256.1 Locale Id: 1033
know if it is possible to get a general OEM repair disk for windows XP, Vista and 7, so one that will work with all OEM's? Also if such a thing does exist where I can get one?
I did a search in the Windows 7 forum for system repair disc and got no hits so here I am asking.I have only Windows 7 32-bit installed here so I don't have a 64-bit system with which to create a system repair disk. I do have a Windows 7 Ultimate setup disk. How can I make a Windows 7 64-bit repair disk?
I have a Dell notebook wiht Windows 7 64-bit that is getting a BSOD (0xF4) and I'm fairly certain is was caused by a rootkit, although I'm not 100% certain. One debugger shows wininit.exe as the culprit and another shows the kernel itself. At any rate, the system will not boot. It gets to where the login dialog is about to show and gets the BSOD. It will not boot in safemode either.Anyway, I've tested the hard drive and memory and I'm fairly certain that it is corrupted and/or rootkit files that is the problem. So I've booted to a Windows 7 repair disk and ran SFC and it tells me that files are corrupted and it can't fix them.Normally I would check the CBS.log file to see what's up, but I'm not sure where the log file is when running SFC from the repair disk. I've searched the "X" drive and the "C" drive, but there's no log files.
I have a problem which I can't seem to fix. I have 2 laptops, both dvd drives are not working. I have an external Usb drive that won't work under boot up. Laptops don't recognise it until drivers are loaded.Hp pavilion dv6500 won't boot. Mbr is damaged. Can't use repair disk as won't recognize Usb drive.So I put hdd into my other laptops 2nd hdd port " Hp pavilion Dv9800 and repaired boot sector that way. Tested it on dv9800 and boots fine.Put hdd back into dv6500 and get same mbr fail message.
I have a few errors on one of my Hard Drives that I would like to fix I have run the built in error repair program in Win 7 but still have these errors, I was wondering if there was a specific program that is free that will correct this at all. If so can anybody point me in the right direction ??
