SFC Logs When Running From A Repair Disk?
May 9, 2011
I have a Dell notebook wiht Windows 7 64-bit that is getting a BSOD (0xF4) and I'm fairly certain is was caused by a rootkit, although I'm not 100% certain. One debugger shows wininit.exe as the culprit and another shows the kernel itself. At any rate, the system will not boot. It gets to where the login dialog is about to show and gets the BSOD. It will not boot in safemode either.Anyway, I've tested the hard drive and memory and I'm fairly certain that it is corrupted and/or rootkit files that is the problem. So I've booted to a Windows 7 repair disk and ran SFC and it tells me that files are corrupted and it can't fix them.Normally I would check the CBS.log file to see what's up, but I'm not sure where the log file is when running SFC from the repair disk. I've searched the "X" drive and the "C" drive, but there's no log files.
View 5 Replies
ADVERTISEMENT
Feb 20, 2011
Per microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
View 9 Replies
View Related
Nov 4, 2009
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
View 9 Replies
View Related
May 31, 2012
After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
View 1 Replies
View Related
May 6, 2011
yesterday it crashed when it restarted it went into system repair and everytime i restarted it went into the system repair not sure if this is relivant but i get a dos windown come up with drvload.exe so i did a hdd factory restore thinking this would clear the problem but it hasnt, now im still getting a system repair everytime i do the mircosoft updates when i restart, plus i cant open hardly any programes like firefox, add and remove programmes.Im now running a harddrive check to see if i have any bad sectors within it, have also run mcfee scan which showed no viruses.
View 6 Replies
View Related
Sep 15, 2011
I'm running windows 7, how do I repair or fix D: drivers. I cant get my disk to play, for computer concepts class.
View 5 Replies
View Related
Jan 12, 2012
My girlfriend's Dell Mini 9 netbook decided to start acting up recently. She turned it on, and it decided to run startup repair. The repair always fails for no apparent reason, and the computer shuts itself down. I tried running a startup repair from a Windows 7 repair disc. The repair from the disc claimed that it fixed issues, and yet when I started the computer up again it ran startup repair again. Its stuck in a cycle I cannot get past. I tried running system restore from the repair disc, but it always fails as soon as its finalized. asically, what the heck is wrong? I unfortunately have little software experience, the majority of what I know is hardware related.
I just ran startup repair from the disc again and read the error details. It says that the root cause is "startup repair has tried several times but still cannot determine the cause of the problem." It still says the errors were fixed. But after yet another boot-up, the repair still automatically runs and fails.etails of the failure:Startup repair cannot repair this computer automatically.[CODE]
View 6 Replies
View Related
Feb 5, 2012
I left my computer - which is an Acer Aspire One, that I purchased, refurbished, a few months ago from a local dealer and came preloaded with Windows Starter 7 - closed, but without turning it off, for a few hours while I ran out to a cafe with a friend (which I've done hundreds of times before. But, when I came back, it was frozen on the firefox tab I had open when I left. So, I figured, I'll just turn it off with the power button and turn it back on. When I did this, Windows stalled out while opening and wasn't going anywhere, and then the screen went black and it went back to the Acer splash screen and told me that Windows had failed to start and suggested I run Startup Repair. So I did, and, after about 5 minutes, it went to a blue screen with a white hummingbird and some curly bits behind it, and a slightly distorted cursor that moves on the screen when I use my keypad and hasn't moved since. That was about 20 minutes ago. I'm really stressing out, because I don't know what to do, and there are files on there that I need for work.
View 1 Replies
View Related
Jan 26, 2011
I have an issue which I need resolved. My hard drive had about 5 different partitions, one for Win7 x86, Win7 x64, Misc, Encrypted Data and Virtual Machines. The Encrypted Data partition was secured with BitLocker - The OS-partitions was _not_ secured with BitLocker. Now what happened was that I had to run the startup repair utility on my Win7 x64 installation and this completely messed up things for me. I have lost the Encrypted Data and Virtual Machine-partition.
I do not care about the VMs, but the Data contains vital information which I have not backed up yet. On top of losing the two partitions, a new partition called HP_tools re-appeared. This partition was removed when I scratched the OEM-installation approx. a year ago. I urgently need to recover this Data-partition. I do have unallocated space (between other partitions) on my hard drive, but none at the exact size of my encrypted partition.
View 1 Replies
View Related
Jun 29, 2012
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
View 2 Replies
View Related
Aug 26, 2012
I have a Toshiba Satellite and when I launch recovery options while starting it up it goes extremely slow. If I launch it with a repair disc it still goes extremely slow. ATM, I've put the repair disc and now im just waiting to see what happens.
View 3 Replies
View Related
Feb 22, 2011
I am now trying to use another persons windows 7 home premium disk to reinstall my operating system because my computer only came with a partition devoted to windows 7 installation and has errors which must be the reason that my sfc /scannow has never worked.Now my question is this. This disk from a friend of mine is probably pirated as it is just a silver verbatim dvd that has windows 7 home premium written in blue highlighter.What I want to know is will this override my real version of windows that came with my pc
View 8 Replies
View Related
Jun 8, 2010
today i found that my windows 7 64 bit ultimate os was unable to boot.after many restart finally i used my system repair disk. disk did work and i m able to boot nowbut can anyone give me some insight about what went wrong in the first place. just dont want this type of problem in the future.
View 2 Replies
View Related
Sep 18, 2012
know if it is possible to get a general OEM repair disk for windows XP, Vista and 7, so one that will work with all OEM's? Also if such a thing does exist where I can get one?
View 6 Replies
View Related
Feb 9, 2013
I did a search in the Windows 7 forum for system repair disc and got no hits so here I am asking.I have only Windows 7 32-bit installed here so I don't have a 64-bit system with which to create a system repair disk. I do have a Windows 7 Ultimate setup disk. How can I make a Windows 7 64-bit repair disk?
View 2 Replies
View Related
Dec 17, 2010
I have a problem which I can't seem to fix. I have 2 laptops, both dvd drives are not working. I have an external Usb drive that won't work under boot up. Laptops don't recognise it until drivers are loaded.Hp pavilion dv6500 won't boot. Mbr is damaged. Can't use repair disk as won't recognize Usb drive.So I put hdd into my other laptops 2nd hdd port " Hp pavilion Dv9800 and repaired boot sector that way. Tested it on dv9800 and boots fine.Put hdd back into dv6500 and get same mbr fail message.
View 2 Replies
View Related
Nov 5, 2011
I think I must have lost Windows Installer using Revo uUninstaller and messed up the registry somehow. I'm a bit afraid to use the Win 7 repair disk 32 bit I created; I might mess things up further. I've tried to download a 32 bit installer update to no avail; it says it's not compatible with my version of Windows (Professional, SP1). Anyhow, does the Win 7 repair disk have a fix for the lost Win 7 installer? If so, I might give it a try if you can provide some guidance in doing so. I have everything backed up in Carbonite, Seagate external drive, Acronis True Image, memory sticks, etc.
View 3 Replies
View Related
Jul 24, 2012
my windows 7 program will not boot up its ask to put in repair disk is there any other way to fix it myself? how much will it cost
View 3 Replies
View Related
May 24, 2012
Is it possible to do a repair instal with any windows 7 disk????
View 4 Replies
View Related
Dec 17, 2012
I have an issue with my desktop PC. I believe I have a corrupted system file since the HDD is no longer bootable; however I have been able to remove the infected drive and install it as a slave on my HTPC. This has allowed me to backup all my important files.My question... I'd like to run a Repair on the existing Windows 7 install but I never created a rescue disk when the OS was operational. Can I create a repair disk using my Windows 7 OS off the HTPC and run it over my desktop PC? Or is the disk specific to the PC the OS belongs to.
View 5 Replies
View Related
Dec 29, 2009
I have a few errors on one of my Hard Drives that I would like to fix I have run the built in error repair program in Win 7 but still have these errors, I was wondering if there was a specific program that is free that will correct this at all. If so can anybody point me in the right direction ??
View 3 Replies
View Related
Sep 3, 2011
I have a toshiba satalite L645 its insanly slow I want to wipe the hard drive and reload but I don't have a repair disk can i download one to another computer?
View 2 Replies
View Related
Jun 29, 2012
My flash disk does not appear on my computer.
View 3 Replies
View Related
Dec 2, 2009
On the Neo Smart website, there is a link to create a emergency boot/repair disc. It's a torrent download (165MB for Win 7 64 bit), they also have the 32 bit as well as Vista 32 & 64 bit discs. It was the first time I have ever done a torrent file, so I done it on my XP laptop. And it is legal, it was said that Microsoft provided these discs. And if you have any questions about it, there is a forum as well. The website is: http://neosmart.net/blog/2009/window...-repair-disks/
The best that I could do was manually type it in, I don't know how to copy & paste or whatever it's called. I had to figure out how to do the torrent thing myself, I'm sure there are many of you who are more experienced. I did create a disc as soon as I got this PC going, but it's better to have another just in case. And I felt it would be good to share this with you all, because I've received a lot of pointers here, and if anyone gets in a jam, I hope that it's useful.
View 1 Replies
View Related
Dec 29, 2009
We just acquired a new laptop with Win7 HP preloaded. One of the first things I did was try to make a System Repair CD (Start/All Programs/Maintenance/Create a System Repair Disc). The CD burning process seemed to go normally. When I tried to run the disc, it seemed to load normally until it got to a screen with the "streaks in the sky" wallpaper and then it stopped. There were no menus, messages, or anything except the wallpaper. I made two discs using a name brand with the same result. I know disc quality used to be an issue but I didn't think this was so these days among the name brands.
View 8 Replies
View Related
Dec 17, 2012
When I recently tried to boot up my system all I could get is a blank screen. Tried to boot up using Windows 7 repair disk but it goes into a loop at the "starting windows" screen consequently won't boot up for me.
View 1 Replies
View Related
Dec 21, 2011
I have a Asus K52F laptop running Windows 7 64 bit. The laptop did not come with a Windows 7 recovery disk. Can a Windows 7 64 bit recover disk be created? When I use the term "recovery disk", I do not mean "repair disk". I already created a repair disk. But my understanding is that the repair disk can not be used to reinstall Windows 7.
View 2 Replies
View Related
Nov 11, 2011
Well I have been trying to fix this error for hours And after the system recovery scan it says there are problems with my start up options but I cant hit those buttons because the s2 keyboard I have in simply wont let me. Secondly I have ran the repair tool but it says I have to manually fix this problem so I tried using the command prompt but to my great luck again I cant get to that option because of my keyboard so I think the real question here is what do I have to do to my keyboard to land over all of the settings?
View 5 Replies
View Related
Dec 13, 2011
I periodically create a system image using an external hdd and a dvd.
I've run out of dvd's and have only got some cd-r's of 750Mb
View 9 Replies
View Related
Feb 24, 2012
I turned my computer off so it could update. It turned off correctly. The next morning, I turn on my computer, and windows starts, and then configures it's updates. After this windows restarts my computer. When the computer restarted, Windows couldn't start. I tried multiple times, but got nowhere. System restare didn't work, I got errors when trying to restore. (I have tried 2 different restore points.) Startup repair, after a few tries, finally gave me an error. It said:
Root cause found:
Bad hard disk: Bugcheck 7a. Parameters = 0xfffff8a001342c00, 0xffffffffc000009c, 0xdda0b8c0, 0xfffff900c0780000.
Every other test ran without errors. This was somehow caused by windows update, because my comp has worked perfectly until windows installed these updates.
View 1 Replies
View Related
Mar 29, 2012
I'm trying to created a posready 7 embedded image, and I want to be able to supply a system repair disc and system image with it, should the disk hardware fail for the end user.
The procedure seemed straightforward, and I'm running it straight after a fresh posready install to test it. I have 2 USB DVD drives attached, one to write the image to, and one because it needs the installation media as part of the creation process. from control panel, backup and restore, click Create a System Repair Disc Choose the dvd writer to use to create the disc and insert a blank disc, I choose E: in my case which has a blank DVD-R "Insert Windows Installation Disc", OK I put the Posready7 install DVD in the other DVD drive F: , click continue... System Repair Disc could not be created, The system could not find the path specified (0x8070003) I have tried inserting instead a Windows 7 Professional DVD at step 3, have tried with a single DVD writer, swapping discs, have tried on a couple of different posready7 installs, one with the 100MB system reserved partition and one without.
I've googled the error code and got lots of results suggesting corrupt user profiles etc, but these are new installs.
View 1 Replies
View Related