i bought this new VAIO laptop, and i want to repair it but when i bought the laptop the store didn't give me the Windows 7 disk but i need to do a complete repair. But this computer also have This VIAO Factory restore setting which restore it to the original factory install software, should i use this option or something else?
View 9 Replies
After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
View 1 Replies View Relatedmake a system repair disk for another computer
View 1 Replies View RelatedI cannot create my system repair disk. My computer cannot read the dvd after I created it. Can I create a bootable usb instead?
View 1 Replies View RelatedToday I booted up my computer and got a screen saying something went seriously wrong with my computer and that I should repair it from an installation disk. I load up windows onto a USB, boot it and click the repair option. It's been about half an hour and nothing has shown up. Is it still loading or perhaps something is very wrong with my PC?
View 2 Replies View RelatedCreated it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
I am pretty sure that a virus cause this, right before my computer shut down on it's own my anti virus popped up and said that a Trojan was found but I didn't have to do anything. Then the computer shut down and when it restartrd started to load files and then go into startup repair, only it couldn't fix it. I tried a restore, but again it said that the startup files wern't there. I just quickly scanned the diagnostic details and noticed something that said "boot critical file C:CI.dll is corrupt".
View 8 Replies View RelatedI am now trying to use another persons windows 7 home premium disk to reinstall my operating system because my computer only came with a partition devoted to windows 7 installation and has errors which must be the reason that my sfc /scannow has never worked.Now my question is this. This disk from a friend of mine is probably pirated as it is just a silver verbatim dvd that has windows 7 home premium written in blue highlighter.What I want to know is will this override my real version of windows that came with my pc
View 8 Replies View Relatedtoday i found that my windows 7 64 bit ultimate os was unable to boot.after many restart finally i used my system repair disk. disk did work and i m able to boot nowbut can anyone give me some insight about what went wrong in the first place. just dont want this type of problem in the future.
View 2 Replies View RelatedI cannot get my computer to restart. It tries to restart but keeps saying that startup repair cannot repair computer automatically. I try to do a system restore but it won't let me do that either
View 1 Replies View RelatedOne day my computer decided not to load windows 7, and instead whenever i open my computer it gets to setup repair, which checks for problems automatically, and then gives the following message:Setup repair cannot repair this computer automatically
Problem Event Name: SetupRepairOffline
Problem Signature 01: 0.0.0.0
Problem Signature 02: 0.0.0.0
Problem Signature 03: unknown
Problem Signature 04: 0
Problem Signature 05: unknown
Problem Signature 06: 1
Problem Signature 07: unknown
OS Version: 6.01.7600.2.0.0.256.1
Locale ID: 1033
I have toshiba satellite P205D-S7438?
On start up a black and white gateway screen flashes followed by a startup Repair window.This gives me a pop up that says Startup Repair cannot repair this computer automatically.There is the option of sending the information to microsoft or viewing problem details.When looking at the details, Problem Signature:Problem Event Name:StartupRepairOfflineProblem Signature 01:6.1.7600.16385Problem Signature 02:6.1.7600.16385Problem Signature 03:unknownProblem Signature 04: 21200290Problem Signature 05:AutoFailoverProblem Signature 06:11Problem Signature 07: CorruptFileOS Version:6.1.7601.2.1.0.256.1Locale ID:1033Underneath the pop up box, The startup Repair window says WIndows cannot repair this computer automaticallywith the option of viewing diagmostic repair details or viewing advanced options for system recovery and support Under the advanced options, I have tried the startup repair, the system restore, the command promptchkdsk/f/rNone of which have worked Prior to this the notebook was working fine last night, I did not install anythingI ran the Farbar Recovery Scan ToolMod Edit: Removed FRST data, this is a malware tool not permitted in this forum and you have made no indication that this is a malware situation ~ Hamluis.
View 7 Replies View RelatedStart up repair cannot repair this computer automatically , I am getting this all of the time now when starting the PC ,i am sure it started when a new video card got put in but not sure?
View 2 Replies View Relatedwhen I go to safe mode and hit repair computer they say I have to use a dvd and hit repair. my dvd does not have repair on it I have trouble with startup I do not know how to use the dvd if it has no repair listed
View 9 Replies View RelatedI have no idea what was the last thing done on this computer (it is my wifes), but I do know that every now and then there has been a disc failure, checking disc startup, but it has always had a positive outcome.[CODE]
View 4 Replies View Relatedi use ubuntu OS and windows7 professional on an HP dv5 notebook, last week i made a mistake in that i removed the battery while the machine was on as i was using windows7. the time i tried to restart it again it recommended startup repair which ran but 'could not repair it automatically' i tried the f8 options but to no avail. when i run scan and memory diagnostics all are successful but the system can still boot. am able to view my data on windows through ubuntu but ubuntu can't execute windows programs. what should i do to restore windows without loosing data?
View 5 Replies View RelatedI think I must have lost Windows Installer using Revo uUninstaller and messed up the registry somehow. I'm a bit afraid to use the Win 7 repair disk 32 bit I created; I might mess things up further. I've tried to download a 32 bit installer update to no avail; it says it's not compatible with my version of Windows (Professional, SP1). Anyhow, does the Win 7 repair disk have a fix for the lost Win 7 installer? If so, I might give it a try if you can provide some guidance in doing so. I have everything backed up in Carbonite, Seagate external drive, Acronis True Image, memory sticks, etc.
View 3 Replies View Relatedmy windows 7 program will not boot up its ask to put in repair disk is there any other way to fix it myself? how much will it cost
View 3 Replies View RelatedIs it possible to do a repair instal with any windows 7 disk????
View 4 Replies View RelatedI have an issue with my desktop PC. I believe I have a corrupted system file since the HDD is no longer bootable; however I have been able to remove the infected drive and install it as a slave on my HTPC. This has allowed me to backup all my important files.My question... I'd like to run a Repair on the existing Windows 7 install but I never created a rescue disk when the OS was operational. Can I create a repair disk using my Windows 7 OS off the HTPC and run it over my desktop PC? Or is the disk specific to the PC the OS belongs to.
View 5 Replies View RelatedWe just acquired a new laptop with Win7 HP preloaded. One of the first things I did was try to make a System Repair CD (Start/All Programs/Maintenance/Create a System Repair Disc). The CD burning process seemed to go normally. When I tried to run the disc, it seemed to load normally until it got to a screen with the "streaks in the sky" wallpaper and then it stopped. There were no menus, messages, or anything except the wallpaper. I made two discs using a name brand with the same result. I know disc quality used to be an issue but I didn't think this was so these days among the name brands.
View 8 Replies View RelatedWhen I recently tried to boot up my system all I could get is a blank screen. Tried to boot up using Windows 7 repair disk but it goes into a loop at the "starting windows" screen consequently won't boot up for me.
View 1 Replies View RelatedI have a Asus K52F laptop running Windows 7 64 bit. The laptop did not come with a Windows 7 recovery disk. Can a Windows 7 64 bit recover disk be created? When I use the term "recovery disk", I do not mean "repair disk". I already created a repair disk. But my understanding is that the repair disk can not be used to reinstall Windows 7.
View 2 Replies View RelatedWell I have been trying to fix this error for hours And after the system recovery scan it says there are problems with my start up options but I cant hit those buttons because the s2 keyboard I have in simply wont let me. Secondly I have ran the repair tool but it says I have to manually fix this problem so I tried using the command prompt but to my great luck again I cant get to that option because of my keyboard so I think the real question here is what do I have to do to my keyboard to land over all of the settings?
View 5 Replies View RelatedI've got a CyberPower desktop computer which has worked great for over a year now. I was having some problems with my hard drive and so I started to attempt to improve it by first doing a disk check and then disabling some programs launching when the computer starts, making sure not to touch the Microsoft ones. Now when I start my computer I'm greeted with a message from the windows boot manager saying "Windows failed to start. A recent hardware or software change might be the cause" the status is "0xc000000f and the info is "The boot selection failed because a required device is inaccessible". The major problem that I'm having is that when I put in the CyberPower disc which contains Windows 7, it seems to just ignore it! What can I do?
View 4 Replies View Related-Product: Sony VAIO factory install Win 7 (x64)
-Issue: windows failure / factory restore attempted and failed / Win will not load
-Other: purchased Win 7 repair disk via C.Net on my IPhone
-New issue: transfer said files using "Win system recovery options via USB
getting a USB mouse or keyboard to work while using a Windows 7 system repair disk. My USB mouse seems to mostly be the problem. The keyboard works most of the time, so why doesn't the USB mouse work
View 3 Replies View RelatedRandomly, my computer is no longer able to boot from my OCZ Agility 3 SSD. By randomly, I mean it was working just fine this morning, but no longer. I can't remember if I changed or updated anything.
Well I then went and inserted the Windows 7 repair disk. A list pops up saying to select my OS, but nothing is listed. I selected load drivers, and I'm able to navigate to the ssd successfully and view all of the files. I even plugged it in to the computer I am using now and was able to back up the more important documents in case I will need to do a reinstall. (I would rather not though).The repair utility doesn't fix the problem, and I navigated this forum and many others trying to find similar problems to mine.
Windows 7 Ultimate 64-bit
AMD Phenom II X4 965
Galaxy GeForce GTX 460
16 GBs Corsair RAM
I do have two other hard drives on the system that I use for general programs and another for raw video storage.They are disconnected now, so I don't see how they would affect the problem.
I'm writing about my brother's Samsung R780 laptop (running Windows 7 64 bit), which recently stopped working. When he starts the computer, he gets the following error: "Windows Error Recovery." Searching around online led us to create a system repair disk on my laptop (which also runs Windows 7). When we boot with the disk in the drive, a prompt asking for our language (which is greyed out so we can't change it) and our keyboard (which we can change) appears. Without changing the keyboard option, we press 'next' and then it freezes. We've also tried the 'repair your computer' option in the Advanced Boot Options, but it also freezes.
View 1 Replies View RelatedI have had Win 7 installed for a while now).
Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERSCLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05: AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.2.0.0.256.1
Locale Id: 1033
know if it is possible to get a general OEM repair disk for windows XP, Vista and 7, so one that will work with all OEM's? Also if such a thing does exist where I can get one?
View 6 Replies View Related
