First off I have a Dell Inspiron n7010 system running Windows 7 Home 64bit
OK the other night I shut down my system and all seemed fine until next day. I went to reboot and got the normal Dell splash screen with both the Set Up (F2) and Boot (F12) options. After the Dell screen finished it then went to load Windows, but instead I got a Black Screen with Flashing Cursor. Can't move cursor at all.
On the Dell screen I can access the Set Up (F2) bios pages. I can also access the Boot Options (F12) Page. What I can not gain access to is the Restore (F8) menus.
I did not know to make any sort of boot disk or boot repair disk so I do not have either of these and I do not know of anyone who is using windos 7 that could make me one to use. Also Dell puts the rstore on the hard drive so onlyhave a MS Works CD and a Drivers & Utilities CD l ran the diagnostics utility but forgot to plug in my computer so when it was almost done the battery must have died so will redo the test later as tired tonight as been up half the night with this issue. But for memory the first 6 of the 8 memories areas it was scanning tested fine. Will post an update later today when Iget chance to run the whole thing again!!
I know others have had this screen. Is there a solution as have spent the last day or so googling it and seems very mixed results depending on the user and their own case with this black screen w/cursor.Some have said bad hard drive (I HOPE NOT THE CASE FOR ME AT LEAST!!!) Some have said bad mother board. Some have said virus or malware Some have referenced a software update both Microsofts and also specific computer companies. So what can I do to get to my files at least to back them up that is providing the drive is OK! I do know from the boot menu my hard drive is showing in the boot menus. Does this mean that the drives OK but maybe a corrupted boot area or something?
I am having trouble with my Toshiba Sattelite MG45. When I turn it on, I get a black screen with a flashing cursor. I have tried the F8 method, nothing happens. Also, I am running Windows 7 with an Intel Core. I am by no means tech savy.
I have an Acer aspire 5733-6607 with Intel Core i3 CPU 2.40GHz.
My mom was on it playing a game on the internet and stepped away to wash dishes when she came back it was on the black screen with the blinking cursor in the top left corner. I tried system repair disc, the recovery disc that it had me make when I first got the laptop and windows defeender offline nothing worked. I tried F8 and it goes to the black screen with acer and where I can press F2 or F12 and then back to screen with blinking cursor. I tried restoring default settings in the F2 menu also.
Have my Dad's Fujitsu Esprimo laptop to uninstall Searchqu, Bandoo etc for him which were causing problems. That went fine, computer shut down and tried to install Windows updates. Now won't restart.Hangs on Fujitsu screen with options for "<ESC>: Diagnostic Screen, <F2>:BIOS Setup, <F12>: Boot Menu" and Blue progress bar. Progress reaches about 75% complete VERY slowly (hour) but then hangs on black screen with white cursor in top left corner. Been like that for 2 hours now.Have tried solutions from Google - click F2 then re-setting boot order in Bios to "default order", click F12 and choose different options, tried F8 for safe mode, but F8 doesn't do anything.I don't know if it's related to Searchqu, to the updates or if it's just a creepy coincidence and the computer itself is actually broken. He doesn't have a Windows7 installation cd.
Earlier this week my HP desktop forced shutdown while browsing the Internet using IE9. Upon reboot the HP screen loaded, afterwards a black screen with a flashing cursor appeared. I had used CTRL+ALT+DEL function in which my computer rebooted.Showed the HP screen and immediately showed the black screen with a flashing cursor. Again no mouse cursor was available. I performed a diagnostics check in which the CPU, HDD, etc. checked out, restored BIOS to factory settings, even placing the HDD as priority 1. I inserted the Windows recovery disk and attempted a start up repair, and a restore point with no favorable results. Through the recovery disks command prompt I accessed all my music and documents, so I assume the hard drive is still functioning. I'm thinking as a last resort of performing a repartitioning of my hard drive and performing a clean install of Windows 7.
I have been getting an alert that I have updates to windows 7, but they never seem to actually install. Tonight it didn't seem like my audio drivers were working anymore.On my other computer I realized that Custopack tools, which is a theme customization program that alters uxtheme.dll, wasn't working with the new service pack. So with this laptop I restored the default windows theme and rebooted, and got my audio back. However, I went to shut down, which would also install the update, and when I booted back up, Windows won't even start.I get past the bios, and then there's just a blinking cursor. The door on the CD-ROM works but the caps lock and num lock do not.
I'm having regarding my Dell with Windows 7 x64. Initially I got the message "Loading PBR for descriptor 2... Done". That's all it said, and did not continue to boot. I researched the error message and found many users with similar problems that solved it by booting the Windows 7 dvd and running bootrec.exe from the command prompt, so I attempted this. I tried bootrec with the /fixmbr, /fixboot, and /rebuildbcd options. After trying to fix my problem with bootrec, the "loading pbr" message no longer appears, all I get is a blank screen with a blinking cursor after the BIOS. I'm not sure what the problem or solution is at this point. I'm not sure if I've made things better or worse. I tried running chkdsk /r but it won't run, complaining that the disk is write protected. Edit: I just realized that System Recovery Options is showing "Operating system: Unknown on (Unknown) Local Disk"
Been having 9 RootKit issues popping up on our Laptop found by the AVG scan for about a month now. I wanted to just do a complete Restore to get things running normally again. Problem is I have a huge amount of pics on there that are not backed up. Been trying to come up with a quick & easy way to do it.Did a Google search the other day & read that I could use a Bridged USB-USB cable & transfer the pics to our PC. Went to Best Buy to get it & they told me that the Belkin Easy Transfer Cable would do it. Well, I attempted to run the thing last night (I don't think it was even doing what I wanted) and now the laptop will not boot at all.There was an error message (that I didn't write down) on it when I got up this morning & now all I get is a black screen with the arrow cursor on it.
Alright, so my Acer laptop has been working fine with no problems at all since i bought it about 2 years ago. This was until yesterday where i turned it on, just to see no login screen, only a black screen with a moveable cursor
I tried ctrl+alt+delete didn't work
I tried to repair windows with the repair disc through a USB, didnt work. It said that windows couldn't automaticly fix the issue, in the log it said:
I tried to restore to previous system points, but didn't have any for some reason
When i boot from the repair disc, i'm able to get into the menu where i chose OS, and found out that when i press Load Drivers, i'm able to access my HDD, where everything seems to be intact, already copied some important work stuff to a seperate HDD if *** won't get working
I turn on my computer to eventually get a black screen with white cursor that will move around. The Toshiba insignia comes up beforehand as well as the windows four square icon then it is to this black screen and white cursor. I cant seem to get the computer to boot up from Windows 7 installation disc. Sometimes I also get a BOOTMGR image is corrupt. The system cannot boot. message as well. I imagine there is a solution of sorts as it seems many people have had a similar problem. I have a freind who maybe able to fix it seeing he is a computer programmer but that is not until the end of the week.
I have purchased an OEM pc yesterday and I installed windows 7 x64 on it. Everything went great with installation. No errors or anything. But when I restarted my computer, after the motherboard splash screen a black screen with a blinking cursor top left appears and windows doesn't boot. But sometimes, especially when I wait a few minutes to turn it on it boots normally till I shut it down. It is so random.
My specs are: Motherboard: gigabyte 970a d-3 Memory: CORSAIR 4GB VENGEANCE DDR3 1600MHZ CL9(*2) CPU: AMD phenom ii x6 1100t black edition 3 .3ghz GPU: Sapphire hd 6870 1GHZ PSU:700watt OS: Windows 7 Ultimate x64
Wonder if anyone could help or provide some ideas.I'm trying to get my spare laptop to work.Every time I turn it on it just boots to a flashing cursor on a black screen.The hard drive in it is new - without windows 7 installed yet.I've tried booting from my windows 7 disk. Set optical drive to first in boot order. Just goes to flashing cursor, does not say "press any key to boot from cd" Tried booting from usb. Set usb hard drive to first in boot order. same as above.Mem test says ram is ok, reports cpu and ram amount in bios ok Laptop is hp compaq nc6320
windows 7 on my laptop will not boot it goes to the toshiba screen then black with cursor in top left. i cannot go to safe mode or startup repair because when you hold F8 or any other key it just beeps. im trying to keep from trying the factory reset.
windows 7 on my laptop will not boot it goes to the Toshiba screen then black with cursor in top left. i cannot go to safe mode or startup repair because when you hold F8 or any other key it just beeps. im trying to keep from trying the factory reset.
my son has a toashiba satellite pro L450D-12x it goes past set up screen then to a blank screen (in black ) with a flashing line in the left corner how can i get it to load properley? before it did this it said media cable fail or something like that and i restored bios back to restore settings and it was also turning itsself off now and again.
Attempted to run chkdsk after Windows Update failed. When I restarted computer to run chkdsk, I got the black screen with the flashing "_". No pointer, if I push crtl, alt, delete, it just attempts to reboot. No other key does anything. I have removed the battery, unplugged the computer, but still get the same results. I am unable to get any boot options when pressing F8. Unable to boot from Repair disk, either. Ran diagnostics in F12, which showed all fine
I was watching a football game on firstrowsport.eu and my computer (a hp pavilion desktop) just shut down uncommanded. I waited for it to restart, and after the BIOS screen, it just had a flashing cursor. I used the disc version of PartedMagic to get into my computer and ran the fdisk-l command. [code]
My computer was working fine a couple days ago and all of a sudden got a terrible Trojan that would spam me with random IE ads. So I ran ad-aware and it got rid of the problem. I went to bed relieved but woke up to my computer in a black screen with just a single cursor "_" flashing. I figured it was a fluke and restarted. same problem.
So I decided to open up the computer and check the SATA drive connections. Everything looked fine but the problem still persisted. I decided that it could just be slot number 1 and moved it to slot 3. The computer would start up and go to desktop but all of my icons disappeared and the computer would just hang if I tried to open any file or go on the internet or any program.
Obviously, it was because the SATA drive was now in a new slot?? I'm not sure. But I put it back into slot 1 and went into the BIOS setup and sure enough, it was a "not detected" for slot 1. The main HDslot.
I tried to reset the BIOS using the jumper method and it still just hangs on black screen with cursor "_" flashing...
I encountered this problem two days ago while using my computer (hp pavilion elite) and it sht off on it's own. I tried to restart and it won't boot windows. Just a black screen with a flashing cursor at the top. I searched all over these forums and haven't found a solution that works. So far I have done a restore point, tried to reinstall windows from a recovery disk, I've used command prompt to Fix the boot record. Diagnostics says my hard drive is fine and I can see the newly installed windows 7 on my hard drive via the recovery disk boot. But when I try to boot from hard drive it still goes black.
when my windows 7 ultimate computer starts up, the screen flashes black, just for a second which is ok. But if i enable aero and use the aero effects then the computer screen flashes black for a second again, everytime i use any aero effect! e.g minimize, thumbnails, show desktop, open files.
I upgraded from windows vista.
my cousins also have windows 7 ultimate and they use the aero effects without any problems. their computer has A NVIDA G-Force, but not sure about the model, although it will be quite new because they bought their computer a week ago.
is it because of my graphics card? i checked the windows 7 upgrade advisor and it said my graphics card is compatible.
my graphics card is :
VIA Chrome9 HC IGP Family WDDM, and i have a Intel Core 2 Duo E4300 @ 1.8Ghz(i've been meaning to overclock but my mobo's rubbish :$)
I tried to shut down my Dell inspiron when it said it needed to update some things and not to turn it off. Without realizing it I pushed the off button and now, everytime I try to turn it on it just shows the Dell logo and then the windows logo and goes to q black screen with a flashing underscore in the top left
Today I started up my pc and after the BIOS screen (the place where you can press f8-f11 for various options) it went to a black screen with a blinking underscore in the upper left corner and stayed there indefinitely. It did this even after reboot.
I tried using the diagnostic tool and everything it tested passed (including HDD). I did this test twice and the same results were produced.
I also googled for similar problems (one topic mentioned that the op disassembling his computer and physically tapping a chip on the motherboard caused it to work) but I have no experience with taking apart my computer and i do not want to break it accidentally. I did however chance upon a topic advising him to do a CMOS reset which apparently helped that op, so i looked through the various options on the BIOS page. There was one option (f10 I think) mentioning CMOS on its fourth sub-window, so i pressed the reset option but I'm mot entirely sure if I used the right function.
I uninstalled kaspersky pure and replaced kaspersky pure for kaspersky anti-virus yesterday, dont know if this was the cause. I am using windows 7 64 bit.
I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
I'm having black screen with cursor only on my laptop! I just restarted my computer because there was a message prompt from my antivirus (AVG) to restart to finish the update. When it restarted all I got was a black screen with cursor only. Same thing happens when I boot to safe mode. Start up repair and system restore cannot fix it automatically. I even tried the crtl+alt+delete. doesn't work either. I'm using dell n4010, windows 7.
I have Sony Vaio which is just 1 yr old. About a week before, I installed the latest updates windows 7. When I started the windows, I was able to log into the windows. But then, the system was very slow. So, I turned down the laptop. After that, a message appeared "A disk error occurred. Press Alt+Ctrl+Del". When I press it, the same message appeared. I tried to go from the safe mode and there is a blank scree with a cursor. I cannot do anything with the cursor. No right click. No task bar and even tried pressing shift 5 times. Every step leads me to the same screen. I even tried to get to the vaio recovery for setting it into the default factory settings.
i have a hp pavilion dv6z-6c00 running windows 7 home premium 64-bit and it's messed up. a week ago i let the battery run out and when starting it up again, i noticed the windows logo page was in a version close to safe mode. right after, instead of going to the log-in page, all i got was a black screen. left it like that for a while and no change. i then proceeded to restart the laptop numerous times and i still got the same thing. sometimes with a cursor but more so without. i have looked online for solutions and have read multiple incidents where it could be a problem with the start-up with my processes. yet i have not found one closely resembling my situation. some solutions recommended doing some diagnostics and memory tests to find out more info. i would try that with the built-in windows version and it would get hung up at 99%. the bios version to test memory only allowed the short version. some mentioned to go into safe mode, yet i do not even have access to the f8 menu. it just goes through the loading and keeps beeping until i let go of the key. some say to start a system recovery but when i try that, it actually loads with the regular windows logo screen but thats about it; it stays there without doing anything else. i really need help on this because i seriously don't know what else to do. i just got the laptop a couple months ago and to run into this really sucks.
I have a Sony Vaio VPCSC laptop that I have owned for about four months. In these four months, I have experienced boot issues once before that was resolved by a lucky guess on my part. I have had the blue screen of death about four times before as well. This problem occurred when I was installing a game on my laptop. I had just agreed to the EULA when I went to go turn off my bittorrent. Just then, my computer froze, giving the familiar white-transparent screen with the circular loading cursor. I waited for it to load, and when it didn't, I went off for about thirty minute to do other things to pass the time. When I came back and it was still frozen, I manually shut off the computer. When I booted up again, the Windows Error Recovery screen appeared, after which I selected Start Windows Normally. The Starting Windows animation ran and then afterwards my screen shut off for about three seconds, came back on with solely the black screen and the cursor. After a second the brightness dimmed. I am left with the black screen and the cursor, which occasionally will be the cursor accompanied by the circular loading cursor, much akin to this [URL] but with the Windows 7 cursor. The entire time, my hard drive indicator is lit. Last night I just left the black screen running, and when I woke up, it was the BSOD.
I restarted and then tried every boot option in the advanced boot options menu. The only one that brings me something besides the black screen is system recovery. In system recovery, Startup Repair runs its course and does nothing, System Restore does nothing because I have no restore points (I know, I know, my bad), System Image Recovery cannot find any system images, Windows Memory Diagnostic simply restarts the computer, and Command Prompt works, seeing as when I click it, it opens.
So, from my own assumptions, I think my hard drive is shot, which is frustrating since I have only had this laptop for four months. I've already had two prior laptops that had hard drive crashes within the first year. I have looked at the other threads about this, yet none of them have helped me, because I do not own a Windows 7 disc, or any disc of that sort.
