Laptop Hanging On Black Screen (flashing Cursor Top Left)?
Aug 11, 2011
Have my Dad's Fujitsu Esprimo laptop to uninstall Searchqu, Bandoo etc for him which were causing problems. That went fine, computer shut down and tried to install Windows updates. Now won't restart.Hangs on Fujitsu screen with options for "<ESC>: Diagnostic Screen, <F2>:BIOS Setup, <F12>: Boot Menu" and Blue progress bar. Progress reaches about 75% complete VERY slowly (hour) but then hangs on black screen with white cursor in top left corner. Been like that for 2 hours now.Have tried solutions from Google - click F2 then re-setting boot order in Bios to "default order", click F12 and choose different options, tried F8 for safe mode, but F8 doesn't do anything.I don't know if it's related to Searchqu, to the updates or if it's just a creepy coincidence and the computer itself is actually broken. He doesn't have a Windows7 installation cd.
View 5 Replies
ADVERTISEMENT
Nov 2, 2012
windows 7 on my laptop will not boot it goes to the toshiba screen then black with cursor in top left. i cannot go to safe mode or startup repair because when you hold F8 or any other key it just beeps. im trying to keep from trying the factory reset.
View 1 Replies
View Related
Nov 2, 2012
windows 7 on my laptop will not boot it goes to the Toshiba screen then black with cursor in top left. i cannot go to safe mode or startup repair because when you hold F8 or any other key it just beeps. im trying to keep from trying the factory reset.
View 1 Replies
View Related
Nov 8, 2012
I am having trouble with my Toshiba Sattelite MG45. When I turn it on, I get a black screen with a flashing cursor. I have tried the F8 method, nothing happens. Also, I am running Windows 7 with an Intel Core. I am by no means tech savy.
View 2 Replies
View Related
Feb 15, 2012
system goes to a black screen with a flashing cursor.
View 1 Replies
View Related
Oct 5, 2011
First off I have a Dell Inspiron n7010 system running Windows 7 Home 64bit
OK the other night I shut down my system and all seemed fine until next day. I went to reboot and got the normal Dell splash screen with both the Set Up (F2) and Boot (F12) options. After the Dell screen finished it then went to load Windows, but instead I got a Black Screen with Flashing Cursor. Can't move cursor at all.
On the Dell screen I can access the Set Up (F2) bios pages. I can also access the Boot Options (F12) Page. What I can not gain access to is the Restore (F8) menus.
I did not know to make any sort of boot disk or boot repair disk so I do not have either of these and I do not know of anyone who is using windos 7 that could make me one to use. Also Dell puts the rstore on the hard drive so onlyhave a MS Works CD and a Drivers & Utilities CD l ran the diagnostics utility but forgot to plug in my computer so when it was almost done the battery must have died so will redo the test later as tired tonight as been up half the night with this issue. But for memory the first 6 of the 8 memories areas it was scanning tested fine. Will post an update later today when Iget chance to run the whole thing again!!
I know others have had this screen. Is there a solution as have spent the last day or so googling it and seems very mixed results depending on the user and their own case with this black screen w/cursor.Some have said bad hard drive (I HOPE NOT THE CASE FOR ME AT LEAST!!!) Some have said bad mother board. Some have said virus or malware Some have referenced a software update both Microsofts and also specific computer companies. So what can I do to get to my files at least to back them up that is providing the drive is OK! I do know from the boot menu my hard drive is showing in the boot menus. Does this mean that the drives OK but maybe a corrupted boot area or something?
View 9 Replies
View Related
Aug 15, 2012
I have an Acer aspire 5733-6607 with Intel Core i3 CPU 2.40GHz.
My mom was on it playing a game on the internet and stepped away to wash dishes when she came back it was on the black screen with the blinking cursor in the top left corner. I tried system repair disc, the recovery disc that it had me make when I first got the laptop and windows defeender offline nothing worked. I tried F8 and it goes to the black screen with acer and where I can press F2 or F12 and then back to screen with blinking cursor. I tried restoring default settings in the F2 menu also.
View 2 Replies
View Related
Oct 10, 2012
Earlier this week my HP desktop forced shutdown while browsing the Internet using IE9. Upon reboot the HP screen loaded, afterwards a black screen with a flashing cursor appeared. I had used CTRL+ALT+DEL function in which my computer rebooted.Showed the HP screen and immediately showed the black screen with a flashing cursor. Again no mouse cursor was available. I performed a diagnostics check in which the CPU, HDD, etc. checked out, restored BIOS to factory settings, even placing the HDD as priority 1. I inserted the Windows recovery disk and attempted a start up repair, and a restore point with no favorable results. Through the recovery disks command prompt I accessed all my music and documents, so I assume the hard drive is still functioning. I'm thinking as a last resort of performing a repartitioning of my hard drive and performing a clean install of Windows 7.
View 2 Replies
View Related
Aug 28, 2011
Upon start up, hit F12 to run diagnostic...goes through a few check lists, then screen goes black with cursor in upper left.
Hard drive, motherboard, etc. all inclusive in monitor.
View 3 Replies
View Related
Jun 30, 2011
My daughter was using my MSI laptop and when she tried to start the computer all that came up was a black screen with the cursor in the upper left corner. She selected the restore option which came up because the other options would not do anything. Is there any possible way to recover my files, pics, etc. or is it just gone now?
View 4 Replies
View Related
Oct 22, 2011
My dell inspiron 537 decided to completely stop working it has a blank screen with a blinking cursor in the left corner Alls I wanna do is get into the start up menu only options I get are f2 and f12 which are useless.
View 2 Replies
View Related
Nov 22, 2011
I tried to shut down my Dell inspiron when it said it needed to update some things and not to turn it off. Without realizing it I pushed the off button and now, everytime I try to turn it on it just shows the Dell logo and then the windows logo and goes to q black screen with a flashing underscore in the top left
View 3 Replies
View Related
Oct 12, 2012
I'm trying to load a system recovery disk, however I'm getting a black screen with a cursor.
I've selected the CD/DVD to be first in the BIOS. I'm having to format my HD, because the laptop would load to a black screen with a cursor.
View 1 Replies
View Related
Dec 1, 2011
I'm trying to boot up this HP laptop that shows a black screen with a blinking cursor after the HP logo. I've tried using a windows 7 recovery disc to repair start up.I've restored the computer to an earlier date that it was working correctly. I've ran every test in the computer's built in diagnostics, and every single one has passed, and no errors in any part of the system were reported. Also, the computer will not start up in safe mode or anything like that.
View 8 Replies
View Related
Feb 16, 2012
Black Screen with cursor? When I switch my laptop on it comes up with a black screen with just the cursor in the top left, this happens before I get to any login screens etc, It's like its wanting to boot a CD but there;s no CD/DVD in the rom! Even when I have put one in, it still hasn't worked..I've looked on lots of forums but none have helped. The only thing that works is F2 that takes me to InsydeH20 Setup Utility & F12 Boot menu.But they dont help! I've tried the usual F8 for safe mode but no such luck, nothing happens, still the same black screen with cursor!
View 2 Replies
View Related
May 12, 2012
Been having 9 RootKit issues popping up on our Laptop found by the AVG scan for about a month now. I wanted to just do a complete Restore to get things running normally again. Problem is I have a huge amount of pics on there that are not backed up. Been trying to come up with a quick & easy way to do it.Did a Google search the other day & read that I could use a Bridged USB-USB cable & transfer the pics to our PC. Went to Best Buy to get it & they told me that the Belkin Easy Transfer Cable would do it. Well, I attempted to run the thing last night (I don't think it was even doing what I wanted) and now the laptop will not boot at all.There was an error message (that I didn't write down) on it when I got up this morning & now all I get is a black screen with the arrow cursor on it.
View 14 Replies
View Related
Jan 15, 2013
Today I tried to boot up my laptop but I am stuck at a blinking cursor on a black screen. To make matters work my keyboard doesn't work either so I can't use F2 or F12 before it boots to the black screen.
View 9 Replies
View Related
Jan 14, 2013
Just today i read a post stating that java has a bad virus. Know that i ran a malwarebites scan and it found 1 harmful item and i deleted the item. After restarting my computer from a prompt, my lenova v570 laptop now turns on with a black screen and a movable cursor right after the windows "welcome screen".
ctrl + alt + delete does not work
I have tried in safe mode and it turns on properly. So, i tried to do what others sujjested on other forums, which was to " roll back my graphics driver" after that, nothing has change.
View 6 Replies
View Related
Aug 11, 2011
my son has a toashiba satellite pro L450D-12x it goes past set up screen then to a blank screen (in black ) with a flashing line in the left corner how can i get it to load properley? before it did this it said media cable fail or something like that and i restored bios back to restore settings and it was also turning itsself off now and again.
View 12 Replies
View Related
Jun 16, 2012
its 1 year 7 months old it starts goes to windows error recovery after choosing start windows normally it then goes to black screen and moveable cursor
View 2 Replies
View Related
Dec 23, 2011
My computer was working fine a couple days ago and all of a sudden got a terrible Trojan that would spam me with random IE ads. So I ran ad-aware and it got rid of the problem. I went to bed relieved but woke up to my computer in a black screen with just a single cursor "_" flashing. I figured it was a fluke and restarted. same problem.
So I decided to open up the computer and check the SATA drive connections. Everything looked fine but the problem still persisted. I decided that it could just be slot number 1 and moved it to slot 3. The computer would start up and go to desktop but all of my icons disappeared and the computer would just hang if I tried to open any file or go on the internet or any program.
Obviously, it was because the SATA drive was now in a new slot?? I'm not sure. But I put it back into slot 1 and went into the BIOS setup and sure enough, it was a "not detected" for slot 1. The main HDslot.
I tried to reset the BIOS using the jumper method and it still just hangs on black screen with cursor "_" flashing...
Specs:
- windows 7 ultimate edition
- Intel duel core @ 3.2ghz
- 4gb RAM
- Asus P5Q-PRO motherboard
- geforce 8800 GTX graphics card
View 14 Replies
View Related
Jul 22, 2012
I encountered this problem two days ago while using my computer (hp pavilion elite) and it sht off on it's own. I tried to restart and it won't boot windows. Just a black screen with a flashing cursor at the top. I searched all over these forums and haven't found a solution that works. So far I have done a restore point, tried to reinstall windows from a recovery disk, I've used command prompt to Fix the boot record. Diagnostics says my hard drive is fine and I can see the newly installed windows 7 on my hard drive via the recovery disk boot. But when I try to boot from hard drive it still goes black.
View 1 Replies
View Related
Jan 20, 2010
when my windows 7 ultimate computer starts up, the screen flashes black, just for a second which is ok. But if i enable aero and use the aero effects then the computer screen flashes black for a second again, everytime i use any aero effect! e.g minimize, thumbnails, show desktop, open files.
I upgraded from windows vista.
my cousins also have windows 7 ultimate and they use the aero effects without any problems.
their computer has A NVIDA G-Force, but not sure about the model, although it will be quite new because they bought their computer a week ago.
is it because of my graphics card? i checked the windows 7 upgrade advisor and it said my graphics card is compatible.
my graphics card is :
VIA Chrome9 HC IGP Family WDDM, and i have a Intel Core 2 Duo E4300 @ 1.8Ghz(i've been meaning to overclock but my mobo's rubbish :$)
View 2 Replies
View Related
Jun 16, 2011
Two drivers do not load at start up and causes windows not to load after updating Bios in raid system. The tdx.sys and serial.sys do not load. I just get a black screen in windows. The cursor can be moved for a short while then it freezes. I have done scannow and repair a dozen times with no results. I have also done chkdsk and all of these come back ok.
View 1 Replies
View Related
Sep 17, 2011
For the last month or so, my home-built Windows 7 (Home Premium) PC doesn't always hibernate properly - it just hangs at the black screen and I have to hold in the power button for at least 4 seconds to 'power off' the PC.
I have no idea why this has started to happen and sometimes it works fine. Sometimes when I boot back up I get the message that Windows has recovered from an unexpected shutdown and will notify me if a solution is available, but no other details are provided.
I've checked the Windows system logs and can see no indication of what is causing the issue when shutting down. Obviously with the screen going black I cannot see any error messages either!
Spec:
Windows 7 Home Premium 32-bit
AMD Phenom II X4 955 Black 3.2GHz
Asus M4A88TD-M EVO/USB3 Motherboard
GEIL 4GB DDR3 Black Dragon Memory
ATI Radeon HD 4250
View 6 Replies
View Related
Mar 19, 2012
have Windows 7 Home edition on a HP dv4 series laptop. Couple of days back I was browsing through a website suddenly the the windows was shutdown. I assumed it was some virus workWhen I try to restart windows it is taking me upto the HP boot options then I get a blank screen with a cursor at the top left corner.The following did not work,1) Booting via the recovery disk2) Booting via recovery hard disk3) I created a USB boot with Ubuntu and even the USB is not getting detected
View 1 Replies
View Related
Oct 21, 2012
Today I started up my pc and after the BIOS screen (the place where you can press f8-f11 for various options) it went to a black screen with a blinking underscore in the upper left corner and stayed there indefinitely. It did this even after reboot.
I tried using the diagnostic tool and everything it tested passed (including HDD). I did this test twice and the same results were produced.
I also googled for similar problems (one topic mentioned that the op disassembling his computer and physically tapping a chip on the motherboard caused it to work) but I have no experience with taking apart my computer and i do not want to break it accidentally. I did however chance upon a topic advising him to do a CMOS reset which apparently helped that op, so i looked through the various options on the BIOS page. There was one option (f10 I think) mentioning CMOS on its fourth sub-window, so i pressed the reset option but I'm mot entirely sure if I used the right function.
I uninstalled kaspersky pure and replaced kaspersky pure for kaspersky anti-virus yesterday, dont know if this was the cause. I am using windows 7 64 bit.
View 4 Replies
View Related
Sep 8, 2009
I was installing Windows 7 onto my laptop (previously vista) and install seemed to run smoothly (went past asking about. PC name, network etc) but after it said it was preparing for first startup, nothing boots. After restarting.. besides the startup Acer screen, there is only a black screen with a blinking underscore at the top left. Whats happening :S?
I've tried F2 and running a setup but it just shows me some specs and such
Btw it has 2.0 Ghz + 2GB ram x__x
View 2 Replies
View Related
Dec 18, 2012
it won't power up little blue light flashing, screen stays black.
View 1 Replies
View Related
Dec 5, 2011
I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies
View Related
Mar 24, 2012
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
View 9 Replies
View Related
