Two drivers do not load at start up and causes windows not to load after updating Bios in raid system. The tdx.sys and serial.sys do not load. I just get a black screen in windows. The cursor can be moved for a short while then it freezes. I have done scannow and repair a dozen times with no results. I have also done chkdsk and all of these come back ok.
View 1 RepliesFor the last month or so, my home-built Windows 7 (Home Premium) PC doesn't always hibernate properly - it just hangs at the black screen and I have to hold in the power button for at least 4 seconds to 'power off' the PC.
I have no idea why this has started to happen and sometimes it works fine. Sometimes when I boot back up I get the message that Windows has recovered from an unexpected shutdown and will notify me if a solution is available, but no other details are provided.
I've checked the Windows system logs and can see no indication of what is causing the issue when shutting down. Obviously with the screen going black I cannot see any error messages either!
Spec:
Windows 7 Home Premium 32-bit
AMD Phenom II X4 955 Black 3.2GHz
Asus M4A88TD-M EVO/USB3 Motherboard
GEIL 4GB DDR3 Black Dragon Memory
ATI Radeon HD 4250
Have my Dad's Fujitsu Esprimo laptop to uninstall Searchqu, Bandoo etc for him which were causing problems. That went fine, computer shut down and tried to install Windows updates. Now won't restart.Hangs on Fujitsu screen with options for "<ESC>: Diagnostic Screen, <F2>:BIOS Setup, <F12>: Boot Menu" and Blue progress bar. Progress reaches about 75% complete VERY slowly (hour) but then hangs on black screen with white cursor in top left corner. Been like that for 2 hours now.Have tried solutions from Google - click F2 then re-setting boot order in Bios to "default order", click F12 and choose different options, tried F8 for safe mode, but F8 doesn't do anything.I don't know if it's related to Searchqu, to the updates or if it's just a creepy coincidence and the computer itself is actually broken. He doesn't have a Windows7 installation cd.
View 5 Replies View RelatedI bought my wife a Dell Inspiron Zino HD with Windows 7 Home Premium preinstalled about 3 years ago. It has been working well since, with a few hiccups here and there.Three days ago it started behaving really badly: it would boot normally up to the welcome screen, but when I click on one of the users icons it simply stays there with the rotating icon forever. It won't even show me the usual box to insert the password.If I boot to a safe mode (no matter which) it boots without problems, but I see nothing wrong with either the device drivers or anything else.
View 5 Replies View RelatedSo basically over the weekend I shut my computer down because I was not going to be home. On sunday I go to turn my computer on and it hangs at the windows logo splash screen after POST. So I grab my laptop and start researching. I am able to get into safe mode with out any trouble only when I start windows normally do I run into problems. So here is what i have tried and with no success. Start up repair w/ and w/out disc, system restore, I have reinstalled windows 3 times, with 2 different versions, pro and ultimate and on first reboot I have the same problem. I flashed my bios about a year ago and have had minor issues since then that were all fixed by using krndbg and windows symbols server as a reference...
View 5 Replies View RelatedI had an OEM version of Windows 7 Home Premium x64 installed, and one day my windows started hanging after the windows logo (when the login screen would appear). I hadn't installed or updated any drivers. After being unable to fix the problem through restoring to a system image, startup repair, etc. I reinstalled Windows 7 x64 from a clean iso (no OEM ware). This meant I was missing some drivers. I downloaded the drivers from the Lenovo website, and after installing the video driver, the problem occurred again. The system does however work fine on Ubuntu 12.10 (Linux).
Using:
Lenovo IdeaPad Y560
Windows 7 Home Premium x64
ATI Mobility Radeon HD 5730
I built a new rig lately.
ASUS P8Z77-v Deluxe
i5-3570K /w CM 212 EVO (not OC yet)
Asus GTX680-2GD5 /w driver 301.10
2x SSD Intel 520 120GB
2x WD 2TB Caviar Black
4x4 G.skill F3-12800CL9D-8GBSR (16Gb Total)
Seasonic 850X
Windows 7
Sometime i get a pure red screen (completely red with no text) the the system hang
I can't tell what cause because i get it whenever i surfing internet, gaming or watching movie
It boots fine but when it gets to the windows 7 splash screen the log in box takes up to 20 mins to display. When it does display I can log in and the computer runs fine.I have tried:
- virus scan which is clean
- malwarebytes comes up with nothing
- restoring to before the problem started
But, the problems remains - up to 20 mins for the log in to appear. It is almost as if it forgets to put it up.
new to windows 7, wanted to get into it a while back but didnt make the first betas. Got my download of the RC the other day, and am proceeding to (or trying to at least) install now.
Is it normal for the setup to sit on the back-splash window for at least 5 minutes before popping up the language selection? I thought at first something went wrong, but eventually it moved on, but now is sitting on "setup is starting" and has been there for about 5 minutes as well.
I am installing on to a freshly wiped hard drive, and it is the only one in the system.
I've had windows 7 for like 4 months now and i turned my computer on today and it was at the please wait screen for about 15 minutes so i forced shutdown by holding the power button and tried again but it will not go past the please wait screen right before the login prompt. I decided to try to run in a different mode and right now i am running in debugging services mode in which functions are limited.
View 1 Replies View RelatedI have a desktop, custom built, that has been a nightmare since day one. Anyway, last time I brought it in for repairs they checked the motherboard and RAM- it was all fine, and they replaced my hard drive.For the past month or so, my computer will freeze or hang while I'm in the middle of working on something. I'm a photographer and it usually happens when photoshop is left sitting open for a few minutes. Firefox will freeze and so will PS and Bridge.When it freezes, nothing works. Ctrl+alt+delete will work to open the task manager, but it won't actually end any tasks when I try. I am forced to hold the power button down to shut it off. About 3 days ago I got a message upon start up saying that I needed to check disk but immediately said that it couldn't check disk due to a corruption? Stating that a recently installed software was the problem and I needed to do a system restore. I tried to do a system restore to before I installed my machforms update and it wouldn't let me! Stated that the c drive is corrupt and I need to do a check disk. So it's sending me in a circle and I can't complete either. Today, when I booted I received a lovely grey screen. This happened about 7 times before it booted normally. I tried to boot in safe mode but it froze.
View 1 Replies View RelatedI just recently installed a Samsung 830 SSD to my Gigabyte Ga-EP45-UD3R mobo. I have a q9550 cpu with 4gb of ram and a 9800GTX+ video card. I was recently running 1 mechanical drive, a WD caviar black 640gb.
I recently wanted to get more speed so I ordered that SSD and installed windows on it. I left the mechanical unplugged until it was all done being installed. I then installed some updates and turned the computer off. I plugged the mechanical drive back in and the windows loading screen came on, the screen then went black and just hangs there. The keyboard is unresponsive meaning the num lock caps lock lights do not illuminate or go off when being pressed. Then after about 2 minutes or so it just activates and all is well.
All the drivers are installed I believe, what could this be?
So now that my graphics drivers were installed the screen turns off. When I boot into safe mode the visuals look fine and it brings me to the home screen, however my usb keyboard goes inactive for about 50 seconds. The screen however continues like the search help cursor is still blinking.
It must be something to do with the Intel southbridge. I just threw the mechanical drive to the third party chipset and it runs better now
My wife did something on her PC (she doesn't know exactly for sure what & can't explain it completely me), and now she can't boot up her PC. She says it had something to do with changing the security settings for a program she uses a lot so it wouldn't keep asking her if she wanted to launch it, and that's when it told her to restart the PC, then it wouldn't boot up anymore.When you reboot, the screen eventually goes to a black screen saying "Windows failed to start. A software or hardware error may be the cause" or something to that effect. It offers me the option to "Launch Startup Repair" or "Start Windows Normally".If I Launch Startup Repair, nothing much happens --- it says it's adding files, then it looks like Windows is about to boot up, then it goes to a black screen for a long time & nothing happens.
If I choose Start Windows Normally, it simply reboots & eventually brings me back to the same screen again.I've tried using rebooting and selecting ESC to get to the boot menu, then installing the Win 7 installation disc & selecting the DVD drive, then I select thelanguage, then I click Repair, but it sits there forever with nothing happening.I also tried an outside boot disc I found on the web & it doesn't launch.
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies View RelatedI have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies View RelatedI have recently bought a computer and I have found that when I turn it on it runs normally until after the "Resuming Windows" screen, where everything turns off and the screen goes black. It had been running well for the last few days, so this came out of nowhere.I have searched this problem and I come up with a bunch of different solutions but no one agrees. The most common reason (apparently) is my version of Windows 7 Home Premium (x64) and I need to install something or other. But I can't even get to the desktop, and no one really explains it simply. [code]
View 3 Replies View RelatedRecently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies View RelatedWhenever the Windows loadscreen passes the screen goes black and I can move a cursor around the screen. I have had this happen before and fixed it with bootrec.exe but I can't seem to get that to work this time. Safe mode has the exact same black screen problem.I have done chkdsk and sfc scannow - Didn't fix it.When I boot into Kaspersky Rescue from a USB drive it mentions that I need to shut down windows properly before continuing. I would like to do this but I can't.I have tried changing the active partition on information in some of these other threads - It didn't seem to work.All disks are healthy according to the DISKPART and Partition Wizard. I have done the HP hardware diagnostic scans and everything comes up fine.
View 1 Replies View Relatedadvent roma 3000 is not starting, when I turn it on, only black screen and the sound of movement, which comes on and off.
View 4 Replies View Relatedhis problem started with XP and I decided to upgrade to win 7 pro.
My PC has a black screen on wake up more times than not. Wake up is set for a login screen normally. My settings are screen saver after 10 mins then send screen to sleep in 20 mins, no hibernation mode, rest machine remains alive, runs 24/7 normally.
I have swapped the power supply and graphics card with ones that work in the same model PC and no joy.
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
View 3 Replies View RelatedMy computer has a problem with crashing while playing a video in full screen. When it crashes the screen turns black while the speakers give out a buzzing noise. Everything is unresposive the only solution is to turn it off with the power button. It happens in any full screen video online or offline and even visualizations from windows media player and iTunes, but only in full screen. I don't think it's overheating either because sometimes it takes 30 mins to crash and other times it will crash immediately when put in full screen. *I've tried setting it back to factory settings thus reinstalling windows. *All the directx features are working with no reported problem there.* I don't think it's a memory issue in the computer, as my specs are:
Windows 7 64-bit
Processor: intel core i5 3.20 GHz
Ram: 8 GB
Graphics card: NVIDIA GeForce GT 220
Graphics card memory: 0.5 GB
Any other ideas?
I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.
View 3 Replies View RelatedI just upgraded to Windows 7 on my Toshiba Satellite Special Edition laptop that came with Vista 64bit and the other night i downloaded iTunes 10 and told me to restart my machine so I clicked ok and then my laptop shut off and when it came back on the Toshiba screen came up as usual but seemed to stay on longer than normal then it goes to a black screen with a underscore that blinks for a few moments then becomes solid. Ive tried to use the "F" keys to get different boot options because i have the windows 7 ISO disc and a ubuntu disc that I could use but whatever i try my laptop wont process it just does the same thing over and over again and bever proceeds to the actually boot up windows.
View 7 Replies View RelatedI have a Toshiba laptop running windows 7. It has been running like a well oiled machine since the day I got it.I turned it off to watch TV, then when I turned it back on, the screen shows the Toshiba screen for about 1/4th of a second and then goes black.If I hit F8, F10, or F12 nothing shows up.
View 2 Replies View RelatedWhile attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
i have an HP Pavillion dv7 with windows7. It is less then 3 months old. Problem- Yesterday the screen went black while i was watching a video, but the sound kept going. so i restarted the computer, and the screen works until you get to the login screen it goes black again. SO i called customer service at hp, and we worked on it for an hour.THe one thing that seems to work is when i go to the device manager, uninstall the display adapters, and restsart in normal mode, then i go and reinstall the ATI device thing in the recovery manager, but everytime after i reinstall the ATI display device thing, it ends up going black a little while later again. lol
View 3 Replies View RelatedRecently my Satellite M305-S39052 was upgraded from Vista to Windows 7 Pro. Everything works fine except for a couple of things; the machine will not restart and even though the buttons on the keyboard are lit, the screen goes black and will not finish the restart sequence. Besides that, after a Windows Update, the pointer will not move and then I have to shut down. After starting in safe mode and doing a System Restore, everything works except for the restart and the Windows Update.
View 7 Replies View RelatedToday i noticed that after my windows 7 logon screen i get a black screen with only my mouse pointer on it. i already tried restoring to a day before the problem but same thing happens. what can i do to fix it? seems to me that the problem started after i installed hotspot-shield i guess it cameout with some driver installer but i dont know which ones
View 9 Replies View Relatedabout a month ago my pc started having errors at bootup. it would get as far as the desktop, then freeze the desktop, allowing me to still use my mouse but i couldnt select anything and the system would hang. After restarting on average about 5 times it would then work and my pc would run perfectly. about 2 weeks ago i had a blue screen crash that mentioned something about the display drivers. (i was using a radeon 4870) i figured this, with the startup problem must be my graphics card on its way out. one day i started my pc and was greeted by my 1st 'black screen' with cursor and decided enough was enough and took out my graphics card, leaving only the on board graphics (radeon 4250). my pc worked fine for a few days and i decided to try and work out if the problem was software of hardware related so i reinstalled my 4870 card. this immediatly booted me to the black screen with cursor so strait away i took it out again.
View 7 Replies View Related