I built a new rig lately.
ASUS P8Z77-v Deluxe
i5-3570K /w CM 212 EVO (not OC yet)
Asus GTX680-2GD5 /w driver 301.10
2x SSD Intel 520 120GB
2x WD 2TB Caviar Black
4x4 G.skill F3-12800CL9D-8GBSR (16Gb Total)
Seasonic 850X
Windows 7
Sometime i get a pure red screen (completely red with no text) the the system hang
I can't tell what cause because i get it whenever i surfing internet, gaming or watching movie
I bought my wife a Dell Inspiron Zino HD with Windows 7 Home Premium preinstalled about 3 years ago. It has been working well since, with a few hiccups here and there.Three days ago it started behaving really badly: it would boot normally up to the welcome screen, but when I click on one of the users icons it simply stays there with the rotating icon forever. It won't even show me the usual box to insert the password.If I boot to a safe mode (no matter which) it boots without problems, but I see nothing wrong with either the device drivers or anything else.
View 5 Replies View RelatedIt boots fine but when it gets to the windows 7 splash screen the log in box takes up to 20 mins to display. When it does display I can log in and the computer runs fine.I have tried:
- virus scan which is clean
- malwarebytes comes up with nothing
- restoring to before the problem started
But, the problems remains - up to 20 mins for the log in to appear. It is almost as if it forgets to put it up.
Two drivers do not load at start up and causes windows not to load after updating Bios in raid system. The tdx.sys and serial.sys do not load. I just get a black screen in windows. The cursor can be moved for a short while then it freezes. I have done scannow and repair a dozen times with no results. I have also done chkdsk and all of these come back ok.
View 1 Replies View Relatednew to windows 7, wanted to get into it a while back but didnt make the first betas. Got my download of the RC the other day, and am proceeding to (or trying to at least) install now.
Is it normal for the setup to sit on the back-splash window for at least 5 minutes before popping up the language selection? I thought at first something went wrong, but eventually it moved on, but now is sitting on "setup is starting" and has been there for about 5 minutes as well.
I am installing on to a freshly wiped hard drive, and it is the only one in the system.
I've had windows 7 for like 4 months now and i turned my computer on today and it was at the please wait screen for about 15 minutes so i forced shutdown by holding the power button and tried again but it will not go past the please wait screen right before the login prompt. I decided to try to run in a different mode and right now i am running in debugging services mode in which functions are limited.
View 1 Replies View RelatedSo basically over the weekend I shut my computer down because I was not going to be home. On sunday I go to turn my computer on and it hangs at the windows logo splash screen after POST. So I grab my laptop and start researching. I am able to get into safe mode with out any trouble only when I start windows normally do I run into problems. So here is what i have tried and with no success. Start up repair w/ and w/out disc, system restore, I have reinstalled windows 3 times, with 2 different versions, pro and ultimate and on first reboot I have the same problem. I flashed my bios about a year ago and have had minor issues since then that were all fixed by using krndbg and windows symbols server as a reference...
View 5 Replies View RelatedI have a desktop, custom built, that has been a nightmare since day one. Anyway, last time I brought it in for repairs they checked the motherboard and RAM- it was all fine, and they replaced my hard drive.For the past month or so, my computer will freeze or hang while I'm in the middle of working on something. I'm a photographer and it usually happens when photoshop is left sitting open for a few minutes. Firefox will freeze and so will PS and Bridge.When it freezes, nothing works. Ctrl+alt+delete will work to open the task manager, but it won't actually end any tasks when I try. I am forced to hold the power button down to shut it off. About 3 days ago I got a message upon start up saying that I needed to check disk but immediately said that it couldn't check disk due to a corruption? Stating that a recently installed software was the problem and I needed to do a system restore. I tried to do a system restore to before I installed my machforms update and it wouldn't let me! Stated that the c drive is corrupt and I need to do a check disk. So it's sending me in a circle and I can't complete either. Today, when I booted I received a lovely grey screen. This happened about 7 times before it booted normally. I tried to boot in safe mode but it froze.
View 1 Replies View RelatedFor the last month or so, my home-built Windows 7 (Home Premium) PC doesn't always hibernate properly - it just hangs at the black screen and I have to hold in the power button for at least 4 seconds to 'power off' the PC.
I have no idea why this has started to happen and sometimes it works fine. Sometimes when I boot back up I get the message that Windows has recovered from an unexpected shutdown and will notify me if a solution is available, but no other details are provided.
I've checked the Windows system logs and can see no indication of what is causing the issue when shutting down. Obviously with the screen going black I cannot see any error messages either!
Spec:
Windows 7 Home Premium 32-bit
AMD Phenom II X4 955 Black 3.2GHz
Asus M4A88TD-M EVO/USB3 Motherboard
GEIL 4GB DDR3 Black Dragon Memory
ATI Radeon HD 4250
Have my Dad's Fujitsu Esprimo laptop to uninstall Searchqu, Bandoo etc for him which were causing problems. That went fine, computer shut down and tried to install Windows updates. Now won't restart.Hangs on Fujitsu screen with options for "<ESC>: Diagnostic Screen, <F2>:BIOS Setup, <F12>: Boot Menu" and Blue progress bar. Progress reaches about 75% complete VERY slowly (hour) but then hangs on black screen with white cursor in top left corner. Been like that for 2 hours now.Have tried solutions from Google - click F2 then re-setting boot order in Bios to "default order", click F12 and choose different options, tried F8 for safe mode, but F8 doesn't do anything.I don't know if it's related to Searchqu, to the updates or if it's just a creepy coincidence and the computer itself is actually broken. He doesn't have a Windows7 installation cd.
View 5 Replies View RelatedI had an OEM version of Windows 7 Home Premium x64 installed, and one day my windows started hanging after the windows logo (when the login screen would appear). I hadn't installed or updated any drivers. After being unable to fix the problem through restoring to a system image, startup repair, etc. I reinstalled Windows 7 x64 from a clean iso (no OEM ware). This meant I was missing some drivers. I downloaded the drivers from the Lenovo website, and after installing the video driver, the problem occurred again. The system does however work fine on Ubuntu 12.10 (Linux).
Using:
Lenovo IdeaPad Y560
Windows 7 Home Premium x64
ATI Mobility Radeon HD 5730
Whenever I try to run the Kaspersky Pure anti-virus, nothing happens. I tried to uninstall it so I can reinstall it. But uninstalling the program is not possible, too. The window is just there but the green bar isn't moving for hours. So I have no choice but to forcibly close the uninstall window.How can I make this anti-virus work again?
View 2 Replies View Relatedmy kaspersky pure won't turn on and in action centre when i click "turn kaspersky pure on (important)" nothing happens it won't turn on i repaired the installation it works but after i restart it is turned off again and won't turn on and it does not even update it always stuck at 0%
View 14 Replies View Relatedupgraded to new computer i7 platform with win7 os. i have 6 other computers running xp pro. can i scrap win7 and put clone of old xp hd in new computer to run pure xp only?
View 1 Replies View RelatedWater pure on laptop and sound card is not working
View 1 Replies View RelatedI just recently installed a Samsung 830 SSD to my Gigabyte Ga-EP45-UD3R mobo. I have a q9550 cpu with 4gb of ram and a 9800GTX+ video card. I was recently running 1 mechanical drive, a WD caviar black 640gb.
I recently wanted to get more speed so I ordered that SSD and installed windows on it. I left the mechanical unplugged until it was all done being installed. I then installed some updates and turned the computer off. I plugged the mechanical drive back in and the windows loading screen came on, the screen then went black and just hangs there. The keyboard is unresponsive meaning the num lock caps lock lights do not illuminate or go off when being pressed. Then after about 2 minutes or so it just activates and all is well.
All the drivers are installed I believe, what could this be?
So now that my graphics drivers were installed the screen turns off. When I boot into safe mode the visuals look fine and it brings me to the home screen, however my usb keyboard goes inactive for about 50 seconds. The screen however continues like the search help cursor is still blinking.
It must be something to do with the Intel southbridge. I just threw the mechanical drive to the third party chipset and it runs better now
i had constant problems with win7 hanging of the shutting down screen or just after.my system is clean of malware and i have modified some registry keys but some are not there (havent been created).how do i enter new keys without screwing up the registry or is there another method of doing this?
View 4 Replies View Relatedthe issue i'm having started a few months back. When I reboot or start up after being shut down the PC shows the Asus P6T screen where i can hit delete for setup, etc. On this screen it has been staying up for a good 1.5-2+minutes. This hasn't always been the case, only the past few months. I just performed a restore and performing a quick reformat for the drive and a fresh install of windows and this is still happening. overclocked if that matters.Below is the system info, copied and pasted from my profile page.[CODE]
View 9 Replies View Relatedif i turn on computer than mouse is not working but i restart computer mouse is working
View 2 Replies View Relatedwhen i play any game or movie my pc hang after every 10mins.
View 1 Replies View Relatedin these past few days, long, 30-second hangs have been occurring increasingly frequently, with no more than a few seconds between hangs today. It starts out one program not responding at a time, then spreads to all the rest of the programs. Sometimes it's so bad that the computer ignores ctrl-alt-delete. I don't know what's causing it, but it is made more perplexing by the fact that no more than 10% of the i7-2600K cpu is being used at any time, and the programs only use 3-4 GB of 16 RAM.
View 6 Replies View Relatedmy dell laptop 500 gb harddisk, 4 gb ram, i5, window 7. it is hanging up after every 4-6 sec. now, videos and pdf files are not opening directly as before. not even scaning happaning fast. firebox is showing 'not responding' again and agian. right now, process 88, cpu 25% are showing task bar.
View 3 Replies View RelatedMy windows 7, IE 8 is freezing, hanging quite a lot lately. It happens when I click on links in emails or go from one website to another while surfing. I have only email and a website page or pages open, so shouldn't be putting a lot of demand on memory. Do security settings cause this while checking security in the background before allowing page to come up. Often my mouse also freezes so I have to wait. When I start task manager (ctrl-alt-del), it reports all applications are running; however they are not.
View 6 Replies View RelatedI'm seeing some odd issues with stanard windows services. Windows Management Interface, Security Center or Windows Update svchost.exe processes gobble up a ton of ram and nothing will execute until that svchost process is killed. This includes already open and new tabs in Chrome browser.I will post TSG SysInfo and HijackThis after I reboot. I already can't run/install either with this attempt.
View 13 Replies View RelatedI'm having a problem with installing windows 7. I start the computer and boot from my dvd-rom and it gets past the "Windows is loading files..." screen occasionally i get to the "starting windows" screen with no logo over it. other times i get a random blue screen. I've read a bunch of different forums online and none of the remedies seem to be working for me. I've tried disabling usb ports, unplugging all peripherals not necessary for the install, swapping harddrives, swapping video cards (including using the integrated),swapped psu, and messing with other bios settings.
My build is:
i5 661 3.33GHz cpu
Biostar TH55 HD motherboard
2x2GB 1333MHz Corsair Memory
600w thermaltake PSU
1TB Western Digital Caviar
500GB Western Digital Caviar
After a recent power failure at my home, I tried to turn back on my computer and I get hanged at the windows 7 logo. I tried to restart multiple times but it don't work. So I to to do safe mode but it don't work either. It gets stuck when it loading to drivers. So I tried to put in the windows 7 installation disk to try and reformat my hard drive, but even that gets hanged at the logo screen when it tries to boot up.
View 4 Replies View RelatedMy window 7 Ultimate OS is hanging after logining into to. After desktop and Task Bar appears nothing more works. Even Ctrl+alt+del also not appears. After a long break it says "Failure to Display security and shutdown options". i have gone through all the options from F8 repair options since 3 days. Opened in safemode and checked the event viewer. i found many errors in it but don't know which is causing this problem. after checking all i found this may be responsible and searched it on google and taken what ever measures they said and got an advance from login screen to desktop and taskbar appearance and hanging there (present situation). Error: Session "ReadyBoot" stopped due to the following error: 0xC0000188, event ID:3, Source: Kernel-Event Tracing.i was able to get into safemode.I have a backup at the time of installation after which i have so many updates and softwares installed. If backup is restores 10s of software installation i loose. and esp. i want restore IE, Chrome and Firefox pages to restore. I have done restore point use (only 1 i have). Tried "last known good configuration", disabling some services incl. readyboot. no use.
View 9 Replies View RelatedRecently, about every 1 in 3 or 4 times that I boot up my computer, Windows (7 Ultimate, no SP1) goes through the normal startup screen, but upon arriving at the desktop, no icons/Explorer/taskbar appear, nor does the cursor- it's almost completely frozen, just showing the desktop background. The only response I can get is via Ctrl+Alt+Del, which just brings me to a black screen, and Esc brings me back to the blank desktop, that's it. I don't have to hard reset to shutdown, if I just press the power button once, the desktop will fade to black (like a normal shutdown), and just turn off correctly (no unexpected shutdown messages or Kernel Power errors) after a while. It seems to be occurring increasingly often.I have not seen the problem occur in safe mode- however, because the problem does not occur every time, it could just be that I've only booted in safe mode on occasions when it wasn't going to do it.Looking at Event Viewer, the most consistent error I get in relation to this is WMI Event 10:
"Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected."Now, for this error, obviously the online help for that event suggests that the fix is to update permanent event subscriptions with the WMI Event Registration tool, but I'm very unfamiliar with WMI and such things, and while I'm sure I could figure it out given time, I'd rather solve this sooner rather than later, and I'm not getting anywhere with that program. Additionally, I ran WMI Diag, which came up with a large number of errors.
Other possibly related errors include:Event 1002 (though this is described as an unimportant, self-fixing error, which I can confirm, but it continually reappears, even though it's being fixed in between): The IP address lease 10.1.1.7 for the Network Card with network address 0x001F337767D6 has been denied by the DHCP server 10.1.1.1 (The DHCP Server sent a DHCPNACK message).Event 7001: The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error: The dependency service or group failed to start.Event 11: The driver detected a controller error on \Device\Harddisk7\DR7.
[code]......
I seem to be having issues with Mozilla Firefox. I think the issues revolve around the latest version, It will stop responding and do it several times in a row. I end up having to kill the process entirely from task manager. [code]
View 2 Replies View RelatedBought lots of cheap RAM, so I thought I'd upgrade from my current 32-bit Vista to 64-bit Windows 7 Ultimate. Easier said than done. Since my DVD drive is busted, I opted to do a USB install using win2flash.
I got to the stage where I had to set up my user account and home share password, but when it rebooted after that, it gets to the Verifying DMI Pool Data and hangs. There are no other HDDs attached, only the primary SATA HDD. The faulty DVD is disconnected. I'm only using 2GB RAM for the install.
Now I can't even get it to boot from the USB...I've selected 'removable drive' on the boot priority list, but with the USB plugged in, it doesnt detect it.
I got me a new 1TB HD and Windows 7 Pro 64 bit (not USB install, actual new DVD. I was trying to install it. The initial parts were painfully slow but they worked.I got to the part where it Copies Files. Then it goes to Extracting Files and it stayed at 0% for about an hour (before I gave up). I could still move the mouse and I clicked on cancel (and then it did very little again).
View 1 Replies View Related
