System Goes To A Black Screen With A Flashing Cursor?

Feb 15, 2012

system goes to a black screen with a flashing cursor.

View 1 Replies


ADVERTISEMENT

Black Screen With Flashing Cursor?

Nov 8, 2012

I am having trouble with my Toshiba Sattelite MG45. When I turn it on, I get a black screen with a flashing cursor. I have tried the F8 method, nothing happens. Also, I am running Windows 7 with an Intel Core. I am by no means tech savy.

View 2 Replies View Related

Black Screen With Flashing Cursor On Boot Up?

Oct 5, 2011

First off I have a Dell Inspiron n7010 system running Windows 7 Home 64bit

OK the other night I shut down my system and all seemed fine until next day. I went to reboot and got the normal Dell splash screen with both the Set Up (F2) and Boot (F12) options. After the Dell screen finished it then went to load Windows, but instead I got a Black Screen with Flashing Cursor. Can't move cursor at all.

On the Dell screen I can access the Set Up (F2) bios pages. I can also access the Boot Options (F12) Page. What I can not gain access to is the Restore (F8) menus.

I did not know to make any sort of boot disk or boot repair disk so I do not have either of these and I do not know of anyone who is using windos 7 that could make me one to use. Also Dell puts the rstore on the hard drive so onlyhave a MS Works CD and a Drivers & Utilities CD l ran the diagnostics utility but forgot to plug in my computer so when it was almost done the battery must have died so will redo the test later as tired tonight as been up half the night with this issue. But for memory the first 6 of the 8 memories areas it was scanning tested fine. Will post an update later today when Iget chance to run the whole thing again!!

I know others have had this screen. Is there a solution as have spent the last day or so googling it and seems very mixed results depending on the user and their own case with this black screen w/cursor.Some have said bad hard drive (I HOPE NOT THE CASE FOR ME AT LEAST!!!) Some have said bad mother board. Some have said virus or malware Some have referenced a software update both Microsofts and also specific computer companies. So what can I do to get to my files at least to back them up that is providing the drive is OK! I do know from the boot menu my hard drive is showing in the boot menus. Does this mean that the drives OK but maybe a corrupted boot area or something?

View 9 Replies View Related

Windows 7 64 Bit Black Screen With Flashing Cursor?

Aug 15, 2012

I have an Acer aspire 5733-6607 with Intel Core i3 CPU 2.40GHz.

My mom was on it playing a game on the internet and stepped away to wash dishes when she came back it was on the black screen with the blinking cursor in the top left corner. I tried system repair disc, the recovery disc that it had me make when I first got the laptop and windows defeender offline nothing worked. I tried F8 and it goes to the black screen with acer and where I can press F2 or F12 and then back to screen with blinking cursor. I tried restoring default settings in the F2 menu also.

View 2 Replies View Related

Laptop Hanging On Black Screen (flashing Cursor Top Left)?

Aug 11, 2011

Have my Dad's Fujitsu Esprimo laptop to uninstall Searchqu, Bandoo etc for him which were causing problems. That went fine, computer shut down and tried to install Windows updates. Now won't restart.Hangs on Fujitsu screen with options for "<ESC>: Diagnostic Screen, <F2>:BIOS Setup, <F12>: Boot Menu" and Blue progress bar. Progress reaches about 75% complete VERY slowly (hour) but then hangs on black screen with white cursor in top left corner. Been like that for 2 hours now.Have tried solutions from Google - click F2 then re-setting boot order in Bios to "default order", click F12 and choose different options, tried F8 for safe mode, but F8 doesn't do anything.I don't know if it's related to Searchqu, to the updates or if it's just a creepy coincidence and the computer itself is actually broken. He doesn't have a Windows7 installation cd.

View 5 Replies View Related

Black Screen With Flashing Cursor Cannot Access Safe Mode?

Oct 10, 2012

Earlier this week my HP desktop forced shutdown while browsing the Internet using IE9. Upon reboot the HP screen loaded, afterwards a black screen with a flashing cursor appeared. I had used CTRL+ALT+DEL function in which my computer rebooted.Showed the HP screen and immediately showed the black screen with a flashing cursor. Again no mouse cursor was available. I performed a diagnostics check in which the CPU, HDD, etc. checked out, restored BIOS to factory settings, even placing the HDD as priority 1. I inserted the Windows recovery disk and attempted a start up repair, and a restore point with no favorable results. Through the recovery disks command prompt I accessed all my music and documents, so I assume the hard drive is still functioning. I'm thinking as a last resort of performing a repartitioning of my hard drive and performing a clean install of Windows 7.

View 2 Replies View Related

BSOD + Black Screen White Cursor + Can't Go To System Repair

Nov 11, 2012

first I was facing BSOD. So I tried going in by every type of safe mode, But it doesn't work, I just go to a black screen with moving cursor and I can't Open the Task Manager.So I tried system restore, failed with the CD. Then I tried the Grub4dos thing It failed as well. It just brings me to the black screen with white cursor.Also when I start in safe mode, it stucks at classpnp.sys and after awhile It goes to BSOD and reboots. By the way this all started when I installed a game, Dishonored.

View 1 Replies View Related

Blank Screen And Flashing Cursor?

Aug 11, 2011

my son has a toashiba satellite pro L450D-12x it goes past set up screen then to a blank screen (in black ) with a flashing line in the left corner how can i get it to load properley? before it did this it said media cable fail or something like that and i restored bios back to restore settings and it was also turning itsself off now and again.

View 12 Replies View Related

Computer Won't Start And Stuck At Flashing _ Cursor Screen

Dec 23, 2011

My computer was working fine a couple days ago and all of a sudden got a terrible Trojan that would spam me with random IE ads. So I ran ad-aware and it got rid of the problem. I went to bed relieved but woke up to my computer in a black screen with just a single cursor "_" flashing. I figured it was a fluke and restarted. same problem.

So I decided to open up the computer and check the SATA drive connections. Everything looked fine but the problem still persisted. I decided that it could just be slot number 1 and moved it to slot 3. The computer would start up and go to desktop but all of my icons disappeared and the computer would just hang if I tried to open any file or go on the internet or any program.

Obviously, it was because the SATA drive was now in a new slot?? I'm not sure. But I put it back into slot 1 and went into the BIOS setup and sure enough, it was a "not detected" for slot 1. The main HDslot.

I tried to reset the BIOS using the jumper method and it still just hangs on black screen with cursor "_" flashing...

Specs:
- windows 7 ultimate edition
- Intel duel core @ 3.2ghz
- 4gb RAM
- Asus P5Q-PRO motherboard
- geforce 8800 GTX graphics card

View 14 Replies View Related

Black Screen With Flashing Underscore?

Jul 22, 2012

I encountered this problem two days ago while using my computer (hp pavilion elite) and it sht off on it's own. I tried to restart and it won't boot windows. Just a black screen with a flashing cursor at the top. I searched all over these forums and haven't found a solution that works. So far I have done a restore point, tried to reinstall windows from a recovery disk, I've used command prompt to Fix the boot record. Diagnostics says my hard drive is fine and I can see the newly installed windows 7 on my hard drive via the recovery disk boot. But when I try to boot from hard drive it still goes black.

View 1 Replies View Related

Black Screen Flashing While Using Aero

Jan 20, 2010

when my windows 7 ultimate computer starts up, the screen flashes black, just for a second which is ok. But if i enable aero and use the aero effects then the computer screen flashes black for a second again, everytime i use any aero effect! e.g minimize, thumbnails, show desktop, open files.

I upgraded from windows vista.

my cousins also have windows 7 ultimate and they use the aero effects without any problems.
their computer has A NVIDA G-Force, but not sure about the model, although it will be quite new because they bought their computer a week ago.

is it because of my graphics card? i checked the windows 7 upgrade advisor and it said my graphics card is compatible.

my graphics card is :

VIA Chrome9 HC IGP Family WDDM, and i have a Intel Core 2 Duo E4300 @ 1.8Ghz(i've been meaning to overclock but my mobo's rubbish :$)

View 2 Replies View Related

Laptop Shows A Black Screen With A Flashing Underscore?

Nov 22, 2011

I tried to shut down my Dell inspiron when it said it needed to update some things and not to turn it off. Without realizing it I pushed the off button and now, everytime I try to turn it on it just shows the Dell logo and then the windows logo and goes to q black screen with a flashing underscore in the top left

View 3 Replies View Related

Computer Stuck At Black Screen With Flashing White Underscore?

Oct 21, 2012

Today I started up my pc and after the BIOS screen (the place where you can press f8-f11 for various options) it went to a black screen with a blinking underscore in the upper left corner and stayed there indefinitely. It did this even after reboot.

I tried using the diagnostic tool and everything it tested passed (including HDD). I did this test twice and the same results were produced.

I also googled for similar problems (one topic mentioned that the op disassembling his computer and physically tapping a chip on the motherboard caused it to work) but I have no experience with taking apart my computer and i do not want to break it accidentally. I did however chance upon a topic advising him to do a CMOS reset which apparently helped that op, so i looked through the various options on the BIOS page. There was one option (f10 I think) mentioning CMOS on its fourth sub-window, so i pressed the reset option but I'm mot entirely sure if I used the right function.

I uninstalled kaspersky pure and replaced kaspersky pure for kaspersky anti-virus yesterday, dont know if this was the cause. I am using windows 7 64 bit.

View 4 Replies View Related

Acer Aspire V5431, It Won't Power Up Little Blue Light Flashing, Screen Stays Black

Dec 18, 2012

it won't power up little blue light flashing, screen stays black.

View 1 Replies View Related

Black Screen On Startup / Showing Cursor / Doesn't Go To Log In Screen

Dec 5, 2011

I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says "This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.

View 3 Replies View Related

Black Screen W/ Cursor After Windows 7 Loading Screen?

Mar 24, 2012

Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.

Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<

View 9 Replies View Related

Black Screen With Cursor Only?

Apr 29, 2012

I'm having black screen with cursor only on my laptop! I just restarted my computer because there was a message prompt from my antivirus (AVG) to restart to finish the update. When it restarted all I got was a black screen with cursor only. Same thing happens when I boot to safe mode. Start up repair and system restore cannot fix it automatically. I even tried the crtl+alt+delete. doesn't work either. I'm using dell n4010, windows 7.

View 2 Replies View Related

Black Screen With Cursor?

May 8, 2011

I have Sony Vaio which is just 1 yr old. About a week before, I installed the latest updates windows 7. When I started the windows, I was able to log into the windows. But then, the system was very slow. So, I turned down the laptop. After that, a message appeared "A disk error occurred. Press Alt+Ctrl+Del". When I press it, the same message appeared. I tried to go from the safe mode and there is a blank scree with a cursor. I cannot do anything with the cursor. No right click. No task bar and even tried pressing shift 5 times. Every step leads me to the same screen. I even tried to get to the vaio recovery for setting it into the default factory settings.

View 3 Replies View Related

Black Screen With No Cursor

May 18, 2012

i have a hp pavilion dv6z-6c00 running windows 7 home premium 64-bit and it's messed up. a week ago i let the battery run out and when starting it up again, i noticed the windows logo page was in a version close to safe mode. right after, instead of going to the log-in page, all i got was a black screen. left it like that for a while and no change. i then proceeded to restart the laptop numerous times and i still got the same thing. sometimes with a cursor but more so without. i have looked online for solutions and have read multiple incidents where it could be a problem with the start-up with my processes. yet i have not found one closely resembling my situation. some solutions recommended doing some diagnostics and memory tests to find out more info. i would try that with the built-in windows version and it would get hung up at 99%. the bios version to test memory only allowed the short version. some mentioned to go into safe mode, yet i do not even have access to the f8 menu. it just goes through the loading and keeps beeping until i let go of the key. some say to start a system recovery but when i try that, it actually loads with the regular windows logo screen but thats about it; it stays there without doing anything else. i really need help on this because i seriously don't know what else to do. i just got the laptop a couple months ago and to run into this really sucks.

View 14 Replies View Related

Black Screen With Cursor Before Log In

Mar 9, 2012

I have a Sony Vaio VPCSC laptop that I have owned for about four months. In these four months, I have experienced boot issues once before that was resolved by a lucky guess on my part. I have had the blue screen of death about four times before as well. This problem occurred when I was installing a game on my laptop. I had just agreed to the EULA when I went to go turn off my bittorrent. Just then, my computer froze, giving the familiar white-transparent screen with the circular loading cursor. I waited for it to load, and when it didn't, I went off for about thirty minute to do other things to pass the time. When I came back and it was still frozen, I manually shut off the computer. When I booted up again, the Windows Error Recovery screen appeared, after which I selected Start Windows Normally. The Starting Windows animation ran and then afterwards my screen shut off for about three seconds, came back on with solely the black screen and the cursor. After a second the brightness dimmed. I am left with the black screen and the cursor, which occasionally will be the cursor accompanied by the circular loading cursor, much akin to this [URL] but with the Windows 7 cursor. The entire time, my hard drive indicator is lit. Last night I just left the black screen running, and when I woke up, it was the BSOD.

I restarted and then tried every boot option in the advanced boot options menu. The only one that brings me something besides the black screen is system recovery. In system recovery, Startup Repair runs its course and does nothing, System Restore does nothing because I have no restore points (I know, I know, my bad), System Image Recovery cannot find any system images, Windows Memory Diagnostic simply restarts the computer, and Command Prompt works, seeing as when I click it, it opens.

So, from my own assumptions, I think my hard drive is shot, which is frustrating since I have only had this laptop for four months. I've already had two prior laptops that had hard drive crashes within the first year. I have looked at the other threads about this, yet none of them have helped me, because I do not own a Windows 7 disc, or any disc of that sort.

View 3 Replies View Related

Black Screen With Cursor?

Dec 23, 2011

I havn't booted up my computer in about 4 months. It was working fine before. Anyways the motherboard screen will come up and after that it will go to a black screen with a blinking cursor on the screen "most of the time" sometimes it's just a black screen. I can't boot into safe mode. I have made sure in the bios that the boot order is correct. I can't boot from CDrom. Is my harddrive bad and if my hard drive is bad shouldn't it still be able to boot from CDrom? that's what doesn't make sense to me.

View 9 Replies View Related

Black Screen With Cursor Only?

Nov 22, 2012

i have install software yeshield from http://yesshield.com/ ...after i restart it....my laptop have black screen with cursor only after 'welcome' screen....how to fix it....,.i recently do restore point and this is not solved my problem.

View 2 Replies View Related

Getting The Black Screen With Just The Cursor?

Jul 18, 2012

I am getting the black screen with just the cursor. I have tried to boot up in safe mode and I still get nothing. I have tried to put in my windows 7 disk and do a repair and that does not work either.

View 5 Replies View Related

Persistent Black Screen With Cursor

Feb 28, 2011

I installed Windows 7 Service Pack 1 a few days ago, and it's been running since then without any problems. However, just yesterday I fell victim to the "Black Screen of Death". I was about to pop out for a few hours, so I exited the game I was playing to turn my machine off. Despite the game being in Windowed mode, where I could happily see the taskbar, once the program closed my entire screen went black. The cursor was present, but I couldn't do anything - not even Ctrl Alt Del.

I reset the computer with the reset switch on the tower, and it loaded back into Windows without issue. Everything looked OK, so I shut it down normally. When I came back a few hours later and turned on the machine, the real problems began. Everything boots fine, including the "Welcome" screen you get from W7 just before hitting the desktop. But instead of the desktop, I get a black screen and a mouse cursor.

Fortunately, safe mode still worked, so I went straight online to search for a solution. One of the articles I read blamed SP1, and said that uninstalling it had fixed the problem for them. So, in safe mode, I uninstalled SP1. SP1 uninstalled successfully, and my desktop returned! But once everything started loading, my Avast alerted me to a possible rootkit. I opted to delete the file, and was asked to perform a boot-time scan, which I agreed to.

I restarted the machine, and Avast's boot-time scan kicked in. It found nothing. Once the scan had finished, Windows restarted and the problem returned. Black screen, mouse cursor. This seems to be a common symptom of a variety of problems, so I have tried:

- The Prevx tool released in 2009 when this problem cropped up. No joy.
- Checking that Windows isn't looking for multiple monitor displays. It isn't.
- Uninstalling the video drivers, disabling the card, and using a different card with different drivers.
- HKLM regedit to ensure there wasn't a Localhost where there shouldn't be, and that explorer.exe was correctly listed. Everything was fine.
- I've run a Malware Bytes, Spybot, and Avast scan (full, thorough) all of which found nothing.
- I've simply sat and waiting at the black screen, for 15 - 20 minutes with no activity.

Ctrl Alt Del doesn't work, neither does Ctrl Shift Esc. The only thing I can do is reset the machine to prompt a "Windows didn't load properly" screen and go into safe mode. I have one last suspicion to try when I get home from work, and that's disabling / uninstalling the audio drivers. But if that fails, I'm out of ideas.

Windows 7 Professional 64-bit
Intel i7 920
6GB RAM
Radeon 5850 HD

View 1 Replies View Related

Windows 7 Black Screen With Cursor?

Feb 19, 2012

Win7 (64 bit) will not boot into regular or safe mode, after log in I get a black screen w / cursor, and that is it. I believe the registry is corrupted. I attempted a repair with the win7 disk, that did not help.

View 4 Replies View Related

Black Screen With Blinking Cursor?

May 14, 2012

I have a sony vaio vpceb11fm laptop. the moment i turn it on i get the vaio sign and then a black screen with a flashing cursor on the top left hand corner i tried f10 to recover the system but come across the same problem.

View 2 Replies View Related

Black Screen With Cursor On Startup?

Oct 16, 2012

When I start my computer, the windows logo animation happens, and then it goes to a black screen with a cursor in the middle. I have done startup repair a few times, and the first time it did something, but now when I try it says there there are no problems. I cannot start it in safe mode either. One major problem is that there are files that I really need for a school project on this computer. So, is there anything I can do to recover the files and fix my computer?

View 3 Replies View Related

Black Screen With Cursor In Windows 7?

Jul 17, 2011

I get only black screen with mouse cursor. As mentioned in some blog I went the registry through ctrl+alt+Del key. went to winlogin and had not found on other key on shell excepting explorer.exe. Hence did not delete any keys.

View 1 Replies View Related

Windows 7 Black Screen With Cursor?

Jul 5, 2011

I have a laptop that came into my shop last week, an HP G62 with Windows 7 Home Premium 64-bit. The user needed immediate file recovery which was done without a problem, and then I went to town on fixing the issue.The customer reported a "memory error" popping up before they shut the computer down. Upon restart, Windows would only load to a black screen with the mouse cursor. I've encountered this in the past and through various methods, such as CTRL+ALT+DEL or Startup Repair, but this one has eluded me for some time.No matter what I do, I can not get anything to launch on this computer. Windows from the hard drive, Windows from the install CD, built in Startup Repair, and Windows in every single startup mode all returns a black screen with the cursor. No shortcut keys seem to do anything.

I have also connected it to an external monitor to see if that was an issue, and it wasn't. I have tried UBCD to no avail, it just doesn't start. I have tried BartPE with a Window XP Pro install and received a blue screen.I have connected the hard drive as an external and run virus and malware scans with no issues found. I have tried to run CHKDSK, but the drive hangs about halfway through. The files, however, are all accessible and able to be moved/removed, but it does not allow me to change permissions. I have heard about this being a permission error, but I have had no luck in that department.The cd-rom drive works as I have just tried Paragon Partition Manager to use the boot corrector, however, it seems to be to no avail either.MemTest turned up no errors. Just to be sure I ran it with each memory stick going solo, same results.

View 5 Replies View Related

Black Screen With Cursor Insolvent?

Apr 23, 2012

So I've read through what seems like 100s of threads about the black screen with cursor. No task manager access, same problem in safe mode and even repair mode. I have not been able to fix this and I need it fixed desperately.

This is an Asus notebook running 7 Home, 64 bit. 2 days ago I reformatted and restored the pc using the discs I made. Everything went great. I took out the HD and plugged it directly into my desktop to transfer all my files back onto it. Got everything done except music. Put the HD back in the note book and used it for 2 days. Worked fine. Took the HD back out and plugged it into my desktop again. Transferred 25gb of music into the my music folder. Put the HD back in the notebook. It started up but wouldn't open iTunes. I thought maybe I should restart it. So I restarted it and it went crazy going through what seemed like every file on the machine. Invalid security id, deleting security id, replacing security id, and so on. I left it alone for a good hour or 2. Can back to the black screen with while cursor no matter what I do. I need this computer for work.

View 4 Replies View Related

Black Screen With Cursor - Laptop?

Oct 12, 2012

I'm trying to load a system recovery disk, however I'm getting a black screen with a cursor.

I've selected the CD/DVD to be first in the BIOS. I'm having to format my HD, because the laptop would load to a black screen with a cursor.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved