I have Dell studio series 1558,I have two issues: After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop. When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work.
I started the machine today and after the welcome screen the screen becomes blank and i get a black screen for about 30 seconds.then i get the task bar and after about 10 seconds i get the desktop.
1> After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop.
2> When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work. My screen resolutions are:
Display: 1.Mobile PC Display Resolution: 1920*1080 (recommended) Orientation: Landscape.
I'm having a reoccurring issue with Windows 7 that always presents itself some weeks after I install it. I've run into this issue of installing windows updates only to have a blank screen with only the cursor present after I login from boot many times and have always had to reinstall. I'm wondering why this issue keeps happening, and what I can do to fix it.Ive tried sfc /scannow /offbootdir ..... several times but it either says it will do it on the next restart (which it doesnt) or it just says it can't run it.
Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
I originally had XP and 1 drive and I was chosen to be the guinea pig for upgrading to 7 (RTM). 7 would not install on the same partition as XP, so I partitioned my drive with Part A with xp on it and part B with 7. Over the next several weeks, I continued to move things from XP to 7 and eventually never went back to XP so it was time to get rid of that partition for good.
I deleted the Part A, expanded part B to take up the whole drive, marked it as the boot partition. Rebooting told me there was no BOOTMGR so I used the repair DVD 3 times to fix the various issues it found.
Now when I boot, I get to the login screen. I login, it takes a long time "preparing desktop", then gives me a blue colored screen with a message in the lower right corner that says "This copy of Windows is not genuine" even though it is.
I cannot use ctrl+alt+del nor ctrl+shift+esc to bring up task manager, it simply doesn't work. Booting into safe mode AND safe mode with command prompt yields the same results.
I booted to a linux distro from USB and copied the registry to look at the Shell and UserInit settings as suggested in other posts, but they are correct.
Any ideas? I really do not want to reinstall everything that I've spent the last 1.5 months installing. Update: I forgot to mention, it is not just 1 user account this happens on. It does it regardless of which account I log in with.
After upgrading my existing installation to Windows 8, I realized I hated it and reinstalled Windows 7 Ultimate (deleting the old installation). Once everything was up and running, I tried installing the latest AMD drivers for it (I'm using a Radeon HD 6700). However, after I reboot and the Windows splash screen disappears (but before the Windows Login), I get a blank screen. There's not any "No Signal" that pops up on my monitor, but my mouse does show.. I can boot just fine into safe mode, then disable the drivers to boot normally. However, I can't boot normally with the drivers enabled.
After login, the screen said 'preparing desktop', then an ALL NEW desktop appeared with most program icons gone.black background that it would not let me change.everything was different.programs froze (malwarebytes).libraries reset. my internet program folder missing...programs loading as new installs. It was like a brand new user was on the machine. Explorer kept crashing and restarting... when it stabilized, I could see my docs folder with a padlock on it, but I could access the files. After freaking out, I did a system restore, and it seemed OK, except Symmantec was damaged and needed repaired. Nothing was found with Symmantec, Microsoft security, or Malwarebytes.
I did an upgrade from Vista Buisness 64, to Windows 7 Ultimate 64. Dell Latitude e6400, with Nvidia Quadro NVS 160M. In general, everything went quite well. Except - when I boot up, I get to the logon screen, I hit Ctrl+Alt+Delete, and I log in, then the screen goes blank. If I hit Ctrl+Alt+Delete again, I get the screen where I can switch user, change passwords, log off, etc. If I cancel this, I get blank screen again.
If I reboot in Safe Mode, all is fine. If I uninstall the NVidia driver, then reboot normal, I can log in, but the system is using Standard VGA driver. I have tried various drivers from NVidia, LaptopVideo2Go, Dell (Windows 7 - 181.71, 181.72, 185.81, 185.85, and Latest Vista driver from Dell site). I've tried installing from normal mode, safe mode, I've tried DriverSweeper, I searched the registry deleting all references to the drivers I can find...). One time I did somehow get 185.81 working - I don't know how.
It was running fine 5 five days (I did not reboot during that time, just sleep mode), then I got a blue screen, and back to the blank screen after logon on the 1st boot. I screwed with the system for another day, and finally got the Dell Vista driver to run once. Once again all was well, until I put the laptop to sleep in the docking stn, then woke it up - blank screen again.
I'm typing this msg now with the standard VGA driver. The 2 things that bother me about this driver, are only single monitor support, and the machine will not go into Hibernate or Sleep mode with this driver (not to mention the speed of the driver).
I'm using Windows 7 Pro. I have remove the login pw in my user account now I do not need to do the login and able to use the computer right away. But I found I am using the computer as a user not administrator. How can I skip the login screen and go straight into desktop as administrator.
I have an RDP Server on a windows 7 ultimate 32 bit and i would like to be able to use another system login screen to connect to this server. As in when i turn of display last local users, so that if i was to enter XXX into the username and XXX into the password and it will connect Although i wouldnt mind being able to set up roaming profiles between these systems either.
After leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.
As of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
After I turn on my laptop Dell starts and it says her resuming windows and then goes to a blank screen with my cursor. I removed the battery and held the power button but don't know what else to do. I don't have a restore disk. I'm running windows 7.
I seem to have a odd issue with my laptop. Sometimes when i boot into windows there would be a blank screen with a mouse cursor after the starting windows screen. I would have to wait for approximately 5 minutes for it to show up my logon screen. I've been having this issue since the start of the year and have attempted to solve it but they have been unsuccessful. Things i've tried:Reformat Windows (Did it 4 times)Purchasing a SSDReduced the start-up items(barely any)?
I opened up my PC to move the front audio cable so that it wasn't sitting on the graphics card (was causing EM interference).When I tried to reboot, my computer now gets to the windows loading screen, then stops outputting video - so the monitor goes blank and eventually turns off. Windows continues to load in the background as I can hear the startup sound play.
1) Booting into safe mode (works fine, can view the desktop etc.)
2) Booting into low resolution mode (doesn't work, same issue)
3) Booting into safe mode, un-installing the graphics card, booting into normal mode and reinstalling drivers for graphics card (doesn't work, same issue)
4) Trying a different PCI-E slot (doesn't work, same issue)
5) Trying a different output on the graphics card (doesn't work, same issue)
6) Hard CMOS reset (doesn't work, same issue)
7) Trying a different graphics card (even worse, didn't get any video out even at BIOS screen - can't guarantee card is working as I don't have a second machine to test with but it was working the last time I used it a couple of months ago. Second card was ATI rather than Nvidia so shouldn't be using same drivers).
Things I intend to try but haven't had time:
1) Plugging into a different monitor (heard some people mentioning it may be to do with the monitor drivers not reporting max screen settings properly, I could find any windows 7 x64 drivers for my monitor as its so old but I do have a TV I can test with)
I let computer downlod updates for windows 7 and then when I hit restart like it said I had to for updates to be complete the screen went blank and the computer justs sits with a black screen. Because it is a laptop I can't power it off and when I try to hit the power button nothing happens. How do I get the computer to start again?
I recently used one key recovery for my lenovo laptop, after restoring, the windows logo is shown but after that my system goes into blank screen mode although the audio can be heard. But when i try with safe mode then i am able to see the screen, what can be the issue??
HP G60 laptop, after the unit has been on for 10min or more it has a random issue with the display going blank. If you move the mouse the display comes back as long as the mouse is moving. Stop moving the mouse the display goes blank. Sometimes if you let it sit awile it will start working again. It is now so bad the computer is not useable. It has McAfee protection and I run system fix it utilities 11.
I'm trying to install Windows 7 on my PC again, and came to a blank screen after the reboot. I have the PC hooked up to a TV using the S-Video output on my graphics card, and suspect that win 7 is using the DVI port instead. There is no way at the moment that I can use the DVI port because I don't have a monitor that supports it.
is there a way around this so I can use the S-video output for the rest of the installation?
I'm trying to install Windows 7 on a new SSD, my old hard drive crashed. My video card is an onboard ATI Radeon HD 4250. Initial setup works fine, but when the computer reboots it comes back up blank. I'm already running two monitors, one VGA and one DVI, and safe mode doesn't work either, I've tried booting from a flash drive and a dvd with exactly the same results.
I am using windows 7 ultimate on my samsung laptop. today I tried to install ubuntu in dual boot mode with my windows 7. I installed ubuntu 12.04 on e drive( mounted as ext 4) and 1.5 gb of swap partition..the installation went smooth but when I restart I get a blank screen with crusor blinking?
The computer goes blank right after Windows starts up as it's supposed to go to the login screen, and the cursor was the only thing to appear. My answer to everything is to basically reinstall Windows 7 and start over, but after inserting the disc, begining the installation, and going through most of the motions....after Windows restarts again the screen goes black. Before I tried to reinstall Windows I was able to use the computer in Safe Mode, but after the reinstallation failed I can't reach safe mode. I can't seem to find a way to finish the installation.
I've run into a problem that's preventing Windows 7 from loading normally. The problem starting happening yesterday, when my computer froze up while I was surfing AGV antivirusver since then, I cannot make it past the "Starting Windows" screen. Afterwards, instead of going to the "Loading" screen, my screen goes to blank.Since I could still bring up safe mode, I've tried the following things, with either no success, or Windows can't detect anything wrong:1. Performed a System Restore to a day earlier.2. Startup Repair didn't detect anything wrong.
