AMD Radeon HD 6700 Blank Screen Before Login?
Apr 1, 2012
After upgrading my existing installation to Windows 8, I realized I hated it and reinstalled Windows 7 Ultimate (deleting the old installation). Once everything was up and running, I tried installing the latest AMD drivers for it (I'm using a Radeon HD 6700). However, after I reboot and the Windows splash screen disappears (but before the Windows Login), I get a blank screen. There's not any "No Signal" that pops up on my monitor, but my mouse does show.. I can boot just fine into safe mode, then disable the drivers to boot normally. However, I can't boot normally with the drivers enabled.
View 4 Replies
ADVERTISEMENT
Dec 31, 2010
Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
View 11 Replies
View Related
Oct 4, 2010
I have Dell studio series 1558,I have two issues: After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop. When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work.
View 12 Replies
View Related
Jan 31, 2012
I started the machine today and after the welcome screen the screen becomes blank and i get a black screen for about 30 seconds.then i get the task bar and after about 10 seconds i get the desktop.
View 4 Replies
View Related
Nov 4, 2009
I originally had XP and 1 drive and I was chosen to be the guinea pig for upgrading to 7 (RTM). 7 would not install on the same partition as XP, so I partitioned my drive with Part A with xp on it and part B with 7. Over the next several weeks, I continued to move things from XP to 7 and eventually never went back to XP so it was time to get rid of that partition for good.
I deleted the Part A, expanded part B to take up the whole drive, marked it as the boot partition. Rebooting told me there was no BOOTMGR so I used the repair DVD 3 times to fix the various issues it found.
Now when I boot, I get to the login screen. I login, it takes a long time "preparing desktop", then gives me a blue colored screen with a message in the lower right corner that says "This copy of Windows is not genuine" even though it is.
I cannot use ctrl+alt+del nor ctrl+shift+esc to bring up task manager, it simply doesn't work. Booting into safe mode AND safe mode with command prompt yields the same results.
I booted to a linux distro from USB and copied the registry to look at the Shell and UserInit settings as suggested in other posts, but they are correct.
Any ideas? I really do not want to reinstall everything that I've spent the last 1.5 months installing. Update: I forgot to mention, it is not just 1 user account this happens on. It does it regardless of which account I log in with.
View 0 Replies
View Related
Sep 8, 2011
1> After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop.
2> When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work. My screen resolutions are:
Display: 1.Mobile PC Display
Resolution: 1920*1080 (recommended)
Orientation: Landscape.
View 9 Replies
View Related
Jan 18, 2013
After login, the screen said 'preparing desktop', then an ALL NEW desktop appeared with most program icons gone.black background that it would not let me change.everything was different.programs froze (malwarebytes).libraries reset. my internet program folder missing...programs loading as new installs. It was like a brand new user was on the machine. Explorer kept crashing and restarting... when it stabilized, I could see my docs folder with a padlock on it, but I could access the files. After freaking out, I did a system restore, and it seemed OK, except Symmantec was damaged and needed repaired. Nothing was found with Symmantec, Microsoft security, or Malwarebytes.
View 4 Replies
View Related
May 14, 2009
I did an upgrade from Vista Buisness 64, to Windows 7 Ultimate 64. Dell Latitude e6400, with Nvidia Quadro NVS 160M. In general, everything went quite well. Except - when I boot up, I get to the logon screen, I hit Ctrl+Alt+Delete, and I log in, then the screen goes blank. If I hit Ctrl+Alt+Delete again, I get the screen where I can switch user, change passwords, log off, etc. If I cancel this, I get blank screen again.
If I reboot in Safe Mode, all is fine. If I uninstall the NVidia driver, then reboot normal, I can log in, but the system is using Standard VGA driver. I have tried various drivers from NVidia, LaptopVideo2Go, Dell (Windows 7 - 181.71, 181.72, 185.81, 185.85, and Latest Vista driver from Dell site). I've tried installing from normal mode, safe mode, I've tried DriverSweeper, I searched the registry deleting all references to the drivers I can find...). One time I did somehow get 185.81 working - I don't know how.
It was running fine 5 five days (I did not reboot during that time, just sleep mode), then I got a blue screen, and back to the blank screen after logon on the 1st boot. I screwed with the system for another day, and finally got the Dell Vista driver to run once. Once again all was well, until I put the laptop to sleep in the docking stn, then woke it up - blank screen again.
I'm typing this msg now with the standard VGA driver. The 2 things that bother me about this driver, are only single monitor support, and the machine will not go into Hibernate or Sleep mode with this driver (not to mention the speed of the driver).
View 5 Replies
View Related
May 21, 2011
I'm having a reoccurring issue with Windows 7 that always presents itself some weeks after I install it. I've run into this issue of installing windows updates only to have a blank screen with only the cursor present after I login from boot many times and have always had to reinstall. I'm wondering why this issue keeps happening, and what I can do to fix it.Ive tried sfc /scannow /offbootdir ..... several times but it either says it will do it on the next restart (which it doesnt) or it just says it can't run it.
View 6 Replies
View Related
Dec 16, 2011
my hp laptop screen loads the desktop after 20 minitus..whats the problem??os is windows 7 home premium and 64 bit
View 1 Replies
View Related
Nov 13, 2011
Dell vostro 1000 Windows 7 Hangs after login, blank screen only cursor is shown
View 1 Replies
View Related
Mar 9, 2011
getting hp 6700 driver for windows 7
View 2 Replies
View Related
Apr 12, 2012
I'm using Windows 7 Pro. I have remove the login pw in my user account now I do not need to do the login and able to use the computer right away. But I found I am using the computer as a user not administrator. How can I skip the login screen and go straight into desktop as administrator.
View 1 Replies
View Related
Nov 26, 2011
I have an RDP Server on a windows 7 ultimate 32 bit and i would like to be able to use another system login screen to connect to this server. As in when i turn of display last local users, so that if i was to enter XXX into the username and XXX into the password and it will connect Although i wouldnt mind being able to set up roaming profiles between these systems either.
View 1 Replies
View Related
Jul 6, 2012
After leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.
View 6 Replies
View Related
Mar 28, 2012
As of about 3 days ago my Dell Inspiron N7010 (Windows 7 Home Prem 64bit) fails to boot up. It gets to the initial Windows screen before the login screen and freezes, then sends me into Startup Repair. [code] I've tried running the diagnostics and get no error codes. I've tried restore points, memory diagnostics.. pretty much everything except factory image, with no success. I have a lot of government programs installed on this laptop, so.
View 9 Replies
View Related
Dec 15, 2011
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
View 3 Replies
View Related
Sep 2, 2012
My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies
View Related
Nov 12, 2011
I have an Acer aspire 5732Z. I turn my laptop on and it shows the starting windows screen then just goes to a black screen with a cursor. I tried to do systems restore but it said that I did not have a system restore point. I cannot start in any safe mode. I have all my pictures, uni work etc., and I am terrified I've lost it all. I've only had the laptop a year.
View 1 Replies
View Related
Mar 27, 2012
Okay so lately I've noticed that my PC isn't displaying the BIOS splash screen anymore and skips straight to the Windows login screen.It didn't really bother me until today when I wanted to boot into Ubuntu and I couldn't select which OS I wanted to use.I'm pretty sure the problem isn't the BIOS itself since I unplugged all the peripherals except the speakers, removed all the RAM and the BIOS did beep repeatedly. And given enough time, I can boot into windows (and only windows ).Apparently people have had this problem before and all the solutions I've read such as "Press 'del' to go into your BIOS!" really doesn't help since I can't see anything in my BIOS menu.The only solution that made sense to me was that my CMOS battery could be dying. I haven't changed my rig since I built it in 2009. The only significant event that happened recently might be that Windows updated itself.
-PC doesn't display BIOS splash screen
-Can't see messages displayed by system
-When windows does bootup, everything runs just fine
-Haven't changed rig for ~3 years
View 9 Replies
View Related
Mar 18, 2012
While attempting to restore a previous backup of my system (with Norton Ghost 15), I got an error, and the system rebooted. Upon reboot, I get the black screen of death with just the cursor instead of the usual login screen. I have tried the following thus far: These all give me the black screen of death with movable cursor:boot in safe mode boot in safe mode with networking boot in safe mode with command prompt last known good configuration I did an initial system startup repair which went through and said it repaired it, rebooted, but no change. I did a pre-boot diagnostic test - nothing memory test - nothing tried restoring from restore point, but it says I don't have any (LIES! BLASPHEMY!) tried restoring from restore point on external disk - seemed okay, then failed. chkdsk - found some stuff, fixed it, no change. tried ctrl+alt+del on black screen of death - nothing
Now, I know that the hard drive itself is alright, that is, the information is still all there still. While I can't give you exact specs, I can tell you that I am on a Dell Studio XPS running Windows 7 home premium 64 bit. I'm at a loss as to what else to do. Despite being a black screen, with just a movable cursor, the system still appears to be running, as every few minutes, it will show the "thinking" cursor, where it shows the little circle next to the arrow.
View 3 Replies
View Related
Nov 16, 2009
i recently just installed a clean install of windows 7(instead of a upgrade from my vista.i got the free upgrade),now everything works fine expect when after the windows 7 splash occurs there is about a 10 second delay were the screen is just black with a cursor.
View 9 Replies
View Related
Oct 3, 2009
I've been using my laptop for a while now and had a friend install Windows 7 onto it (because i'm quite rubbish with this sort of thing) and everything has been going great until a few weeks ago.
I loaded it up one day and everything is going fine until it reaches the part where it's supposed to load the log on screen. Instead of a log on screen all i am getting is a black screen with the cursor. Now i can't give you specs to my computer or anything of the like because i simply don't have access to it but i can give as much aid as possible to help find the problem.
One of the things that happens is that when the black screen & cursor appears if i move the mouse or push any buttons the screen goes VERY dim as if i've put it into a lower power mode or i've taken out the power cable. If i push the power button to turn it off even if it's just a tap on the button the screen will go off immediatly even if the laptop is still running.
One of the green lights that i believe is showing if the hard drive is busy or not flashes during the process but after a minute or so of the black screen it'll stop flashing altogether.
I've tried all three safe modes with all the same results, F8 to system repair has given me no love with startup repair finding NOTHING wrong, memory check running through the process only for the same thing to happen and system restore has no restore points to go to.
I've looked for answers in several places and some say i have to use sticky keys to get the screen to come on but the problem is that as of last nights use i turned sticky keys off for a few minutes so i could play a game and forgot to turn them back on afterwards. I've taken a look around the net and can't find a fix to my problem. Reinstall simply is not an option under my current circumstances so i really need a favourable reply.
View 7 Replies
View Related
Nov 10, 2009
I just installed Windows 7 Professional Version on my computer, it is a high-powered desktop with good specs. My graphics card is a 1GB HD Radeon 4850. I used to have Windows Vista 64bit and it displayed with a clear screen. However, after my upgrade, now the screen is all blurry and messed up. I downloaded ATI CCC and installed the new drivers and STILL, the computer screen is so blurry.
I was really looking forward to this upgrade to Windows 7, but I feel almost forced to revert to Vista because after looking at the screen for about 5 minutes, i get the worst headache ever and my eyes strain awfully.
I use 1920 x 1080 resolution and an HDMI cable, the recommended setting. If I go down to the lower resolution like 1720 x 1000 (not sure if thats exactly what it is) it is more clear, but I lose space and I feel it is still not as clear as it was on vista.
View 0 Replies
View Related
Oct 27, 2009
well yeah used it on my windows vista it did make it faster and never had a problem(no I never bought it :P). then I upgrade to windows 7 and I ran it cleaned the error's and just screwed it up. I need to restore my registry, start up fix doesn't work and I don't have system restore on don't have a backup so I go to CMD in start up fix enter notepad look for files to restore stuff can't really find anything.
I can restore reg files by notepad I mean I tried a lot of stuff so is there any CMD command to restore registry or a reg file I can use to restore registry? tried sfc /scanow (i don't think it restore's registry only file's that are modded files that are not from Microsoft).
View 6 Replies
View Related
Jul 17, 2012
I also have an old computer with SATA hard drive running XP SP2, it is connected to samsung LCD tv, it was working properly for months but today while i was using it, the screen went blank(black) nothing showing on lcd, I tried every thing i can but of no use, even connected to other monior also but... nothing displaying, Cpu is running but when I tried to turn it off from power button it didnt response, have to switch it off from electric board.
View 7 Replies
View Related
Nov 6, 2012
I'm running Windows 7 Home Premium.As I brought my computer out of sleep mode the computer had crashed with the screen showing vertical, multicolored lines that vaguely resembled gray.I had to hard restart my computer and after the splash screen, the login screen with all the users never appears, nor does my cursor.Nothing is on my screen except a faint glow indicating that it's active.
View 2 Replies
View Related
Oct 4, 2012
I got a bad virus on my computer about a week ago. I decided to use my windows 7 installation disc to reformat my disk drives and reinstall windows 7. The installation goes smoothly and I am able to login to windows. But after I install drivers and updates, then restart the computer, I get the "starting windows" screen with the swirling logo. I can hear the chimes that sound when I get to the login screen, but the screen is black. I can make the cursor appear by moving the mouse, but I cant do anything else. I never created a system restore disc, so I dont have that to help me.I have done some tinkering and will tell you what did not work so far.First, like I said, I used the windows 7 install disc to reformat my disk drives. Then, I reinstalled windows. I installed the updates for my graphics card and motherboard. When I restarted, I got the black screen. I restarted the computer and used F8 to do a system repair. This detects no problems. I tried to use the "startup repair" on the windows installation disc. This does not recognize a problem. I have tried it several times. Same result. Next, I tried to use the repair options on the windows install disc. I went to command prompt and typed in: bootrec.exe /fixmbr, bootrec.exe /fixboot, and bootrec.exe /RebuildBcd. (An interesing note: When I used the RebuildBcd command, it said that it detected 0 windows installations.) After the first time I did that, I tried the startup repair and got my first and only error message: "Startup repair cannot repair this computer automaticaly". I checked the details and it said "Problem event name: StartupRepairOffline". If you need the rest of the details, I can provide them. But I tried the repair again, and there was apparently no problem. Yet, still got the black screen.I then reformatted again, deleted both drives, and made new ones. I tried to install windows again, and I can get to my desktop.(One thing I noticed is that before I install updates, the computer is saying that my monitor is a "Generic PnP monitor on standard VGA graphics adapter". I dont know much about computers so this may be normal before installing the graphics card updates.)This time, I was connected to the internet and tried to install the system updates first. After all 120+ updates installed, I restarted and got the black screen again.I decided to use the install disc again to reformat, delete, and recreate the hard drives. This time I tried to install windows on the second hard drive (Disk 1) Again, the install went smoothly. I started installing the graphics card and motherboard drivers, but this time it told me that my disk drive D needed to be formatted before use. I reformatted it (this took MUCH longer than the format option on the install disc), installed the drivers, and restarted. I still cant get into the login screen. Finally, I used the install disc to reformat, delete, and recreate the disk drives. This time I installed windows on the first hard drive (drive 0) again and got to the desktop. Now I tried to install the motherboard drivers first, then restart. I did this and was able to restart and get back to the desktop. Next, I installed the graphics card dirvers, and then restarted. Black screen again.
Here are my computer specs:
Windows 7 64bit OEM
EVGA P55 FTW motherboard
EVGA GTX570 graphics card
Intel i5-760 processor
Intel patriot 8gb ram
View 14 Replies
View Related
Sep 20, 2011
I booted Windows 7 a few minutes ago, and saw what made me think something might have happened relating to my graphics card. Right before the log-on screen came up, I saw a lot of flickering/static, which I thought was really odd because the PC is connected to the monitor with a digital signal (DVI). The computer froze, at this point and I had to reboot. I'm posting from the same PC, so needless to say the reboot worked.
View 3 Replies
View Related
Jul 15, 2012
So I download an update for my ati radeon HD 4350 (AMD Catalyst) And it seemed to work fine before when i installed it but i turned in my computer this morning and ot seemed to work fine but after a few minutes my computer just went to a black screen. so i restarted my computer same results, so i booted in safe mode and decided to explore the problem. At first I attempted to uninstall and reinstall the update but when i tried to uninstall it failed and the message "failed to load detection driver" or "couldn't detect system specs" or something along those lines. So i tried to run a game and it wouldn't open. I think i may of somehow broke my graphics card?
View 1 Replies
View Related
Oct 3, 2009
I have a Toshiba laptop with an ATI Radoen 3100 Graphics adapter onboard. with windows 7 32 bit and 64 bit, I get the blue screen of death. what can I do about it?
View 5 Replies
View Related
