Receiving A Blank Screen When Loading Windows 7 64 Bit?
Jul 21, 2012
I've run into a problem that's preventing Windows 7 from loading normally. The problem starting happening yesterday, when my computer froze up while I was surfing AGV antivirusver since then, I cannot make it past the "Starting Windows" screen. Afterwards, instead of going to the "Loading" screen, my screen goes to blank.Since I could still bring up safe mode, I've tried the following things, with either no success, or Windows can't detect anything wrong:1. Performed a System Restore to a day earlier.2. Startup Repair didn't detect anything wrong.
View 2 Replies
ADVERTISEMENT
Apr 29, 2012
I've run into a problem that's preventing Windows 7 from loading normally. I'm still able to bring up windows in safe mode perfectly fine. The problem starting happening yesterday, when my computer froze up while I was surfing GameFAQs, forcing me to perform a hard reset. Ever since then, I cannot make it past the "Starting Windows" screen. Afterwards, instead of going to the "Loading" screen, my screen goes to blank, with a message that it cannot detect an input and my pc just hangs there.Since I could still bring up safe mode, I've tried the following things, with either no success, or Windows can't detect anything wrong:
1. Performed a System Restore to a day earlier.
2. Startup Repair didn't detect anything wrong.
3. WIndows Memory Diagnostic didn't detect anything wrong.
4. Performed an Error Check on my hard drive with the built-in Windows tool with auto-repair on.
5. I rolled back my video card drivers (Nvidia GTX 460) to a previous version.
View 6 Replies
View Related
Sep 9, 2010
I'm reinstalling windows 7 ultimate. I try and boot from DVD and it loads files the the screen goes blank.
View 9 Replies
View Related
Jan 29, 2012
I bought a hp laptop about a year ago and have been having a problem for the last couple days. I have windows 7 and when I go to start the laptop up it shows the HP screen then goes to the windows screen like its loading but then goes back to the hp logo and is stuck. I ran a HDD test and memory test those came back good. I tried to go into safe mode it acts like it loading then shows a blank screen. I try to do a system recovery and system restore the screen stays blank. I also took the battery out and press the power button down but that hasn't work. It's no longer under warrenty.
View 3 Replies
View Related
Oct 7, 2010
i have a dell optiplex 780 desktop computer with 160GB hard drive and 4GB ram and its a 64-bit OS , I had a windows 7 installed on it but once my couzin used it and he put on a password on thw windows and then he obviously forgot the password but anyway i couldn't get in to my user so i googled and tried some ways to crack the password but didn't work so i kept restarting my computer to try new passwords and at one point my computer just wont work after the windows logo , Now it just goes blank after the windows starting up logo , so i decided to do a new clean windows 7 (32-bit) but when i choose to boot it from the CD room and it asks me to press any button to boot from Cd or dvd and i do press but after loading the files i get a blank screen and it would just stop, i can hear the cd running and all but no display
View 2 Replies
View Related
May 5, 2010
When I try to do a clean install of Windows 7 I get the loading files white progress bar you normally get during an installation, it then goes directly to the scrolling progress bar that would normally appear before a Windows startup, and then goes to a blank Windows 7 desktop with only a cursor (that I can move).I have a computer with the following specs:[CODE]I have tried to install with every version I can get my hands on, both 32 and 64 bit. None of them are upgrade versions. I've tried installing on a fresh WD Raptor and an Intel G25 SSD. All other drives have been disconnected. I've moved my memory around and tried with one stick. My mainboard has the latest official BIOS, although there is a new beta.
I ran the Windows 7 compatibility test and didn't see anything that would cause this problem.I have searched the internet and have not been able to find a solution sonstalling Windows XP has never been a problem, just Windows 7, always with the same problem.This is one of the few times when I have not been able to look around a find an existing answer to a problem and I am stumped.
View 2 Replies
View Related
Dec 18, 2011
As of today I have been unable to download anything, when I go to download the page just goes blank and says loading, that is in googlechrome, in explorer I get to the download and it just does nothing, so I thought I would take of my AVG free and try a different antivirus (Avast) from C-net and filehippo, fool that I am, I can not down load either of them, so at present I do not even have antivirus on here,I have restored my pc.I have scanned my pc for problems emptied history and cache.rebooted my router.
View 6 Replies
View Related
Dec 19, 2012
I am currently facing some problems in loading webpages from browsers. I have tried every browsers with me like Firefox, IE and Chrome. But every time i enters an url, it loads the url( as i can see the title bar showing the website title) but the browser shows the blank page. So it does suggest that my internet connection is in good shape since the page title loads.
View 3 Replies
View Related
Jul 6, 2012
After leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.
View 6 Replies
View Related
Mar 24, 2012
Recently, my computer starts up windows and after the loading screen it just sits at a black screen forever with a cursor and it doesn't even make it to the log in screen. I have tried safe mode with the same results. What I've Done So FarTried to Repair Startup with Windows DVD Tried to use sfc /scannow at boot (Says pending changes and needs to restart) Tried logging into my Ubuntu partition and virus scanning (None found) Tried copying Reg Files from Regback into config while I was in Linux Tried to Repair Install (But I can't log into Windows ) Tried to bootrec /fixmbr /fixbot /RebuildBcd (Which destroyed my dual boot linux grub, but I was desperate. And still nothing) Interestingly though, after I do /RebuildBcd command it says something like "Found Windows Installations: 0" Tried to System Restore (Gave me an Error, wouldn't you know) At this point I'm not to confident that this can be fixed. If anyone has any ideas I'm willing to try. Or if you have any snazzy suggestions on how I could fix it using another computer, I have a different Windows Pro x64 computer that I can put the HD in if there's someway I can save my data/fix it/repair install from there. I just don't know how.
Edit: I finished the chkdsk and there were no bad sectors, though it did give me a message "Failed to transfer logged messages to the event log with status 50."I did a Windows Defender Offline scan with no viruses and I'm currently scanning with Kaspersky Rescue disk. I don't believe it is a virus, I think it's a corruptregistry at this point. I had just cleaned my registry with CCleaner before the shutdown that led to this >.<
View 9 Replies
View Related
Dec 31, 2010
Everything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
View 11 Replies
View Related
Oct 4, 2010
I have Dell studio series 1558,I have two issues: After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop. When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work.
View 12 Replies
View Related
Sep 4, 2011
When computer starts is says windows is starting and then just get blank screen with cursor.
View 1 Replies
View Related
Sep 30, 2012
After I turn on my laptop Dell starts and it says her resuming windows and then goes to a blank screen with my cursor. I removed the battery and held the power button but don't know what else to do. I don't have a restore disk. I'm running windows 7.
View 6 Replies
View Related
Aug 13, 2012
I seem to have a odd issue with my laptop. Sometimes when i boot into windows there would be a blank screen with a mouse cursor after the starting windows screen. I would have to wait for approximately 5 minutes for it to show up my logon screen. I've been having this issue since the start of the year and have attempted to solve it but they have been unsuccessful. Things i've tried:Reformat Windows (Did it 4 times)Purchasing a SSDReduced the start-up items(barely any)?
View 14 Replies
View Related
Jan 31, 2012
I started the machine today and after the welcome screen the screen becomes blank and i get a black screen for about 30 seconds.then i get the task bar and after about 10 seconds i get the desktop.
View 4 Replies
View Related
Sep 8, 2011
1> After Powering on the laptop and inputting the password for login to Windows 7, I get a black screen with the Mouse cursor active. In the background the login seems to have happened but I don't get to see the Desktop.
2> When i open any program or web page, e.g. yahoo messenger, the messenger/webpage display is very small, i had to manually enlarge it to view properly, i tried changing my screen resolution, but didnt work. My screen resolutions are:
Display: 1.Mobile PC Display
Resolution: 1920*1080 (recommended)
Orientation: Landscape.
View 9 Replies
View Related
Jul 18, 2012
I opened up my PC to move the front audio cable so that it wasn't sitting on the graphics card (was causing EM interference).When I tried to reboot, my computer now gets to the windows loading screen, then stops outputting video - so the monitor goes blank and eventually turns off. Windows continues to load in the background as I can hear the startup sound play.
Computer Setup:
Gigabyte GA-EX38-DS4 Motherboard
Intel Core 2 Duo E8400 CPU
Gigabyte 670 GTX Factory OC GFX Card
4GB RAM (I think XMS2)
500GB Samsung Spinpoint F3 7200rpm HDD
Corsair 650W modular PSU
Linksys PCIE wireless card (can't remember model)
Things I have tried:
1) Booting into safe mode (works fine, can view the desktop etc.)
2) Booting into low resolution mode (doesn't work, same issue)
3) Booting into safe mode, un-installing the graphics card, booting into normal mode and reinstalling drivers for graphics card (doesn't work, same issue)
4) Trying a different PCI-E slot (doesn't work, same issue)
5) Trying a different output on the graphics card (doesn't work, same issue)
6) Hard CMOS reset (doesn't work, same issue)
7) Trying a different graphics card (even worse, didn't get any video out even at BIOS screen - can't guarantee card is working as I don't have a second machine to test with but it was working the last time I used it a couple of months ago. Second card was ATI rather than Nvidia so shouldn't be using same drivers).
Things I intend to try but haven't had time:
1) Plugging into a different monitor (heard some people mentioning it may be to do with the monitor drivers not reporting max screen settings properly, I could find any windows 7 x64 drivers for my monitor as its so old but I do have a TV I can test with)
View 9 Replies
View Related
Oct 12, 2012
I let computer downlod updates for windows 7 and then when I hit restart like it said I had to for updates to be complete the screen went blank and the computer justs sits with a black screen. Because it is a laptop I can't power it off and when I try to hit the power button nothing happens. How do I get the computer to start again?
View 2 Replies
View Related
Dec 7, 2012
I recently used one key recovery for my lenovo laptop, after restoring, the windows logo is shown but after that my system goes into blank screen mode although the audio can be heard. But when i try with safe mode then i am able to see the screen, what can be the issue??
View 2 Replies
View Related
Sep 19, 2012
i recently got a new dual-monitor desktop built by a friend and it worked fine for the first week or so. a few days ago it started getting hectic whenever i tried to turn it on, in that it would frequently do one of two things:
1) the screens would both go black and post "no signal"
2) both screens would freeze in place and it would recognize no actions aside from turning the desktop off the "no signal" issue only appears when attempting to log in or right after turning the computer on, whereas the screen-freezing would happen at any given time, whether it be logging onto the computer, checking facebook, or playing diablo iii. it currently takes me 3-4 attempts to get it running properly each day. everything in the computer is new, so it shouldn't be a problem with bad cables connecting the monitors to the tower or the ports that the cables are connected to. i've tried moving the cables to different ports on the tower, and it doesn't really seem to be affecting the problem. nothing is out of place or unscrewed inside the tower, so it's probably a software issue. the same friend that built the computer suggested that i get the latest nvidia drivers since the most recent ones were available on the 14th, whereas my current nvidia drivers are slightly older. i tried downloading the most recent one, but then i received the screen-freezing problem. whenever i attempt to download anything video-related online, the comp simply freezes up again. i can play Internet videos and diablo iii fine, just not download anything significant off the internet. my friend tried working with the comp as well, but he's at his wit's end and suggests that we get outside help in diagnosing the problem, so he recommended this site.
computer specs are as follows:
windows 7 ultimate (service pack 1)
intel core i7 cpu
64-bit os
x2 gtx460 video cards
12.0 gb of ram
View 6 Replies
View Related
Nov 18, 2012
I did a clean windows 7 installation after formatting my Hard drive the installation went clean i noticed that after switching my computer it takes me directly to " starting windows " and then to " Login screen " but in my previous installation i use to get,As shown in the picture, the black screen showing microsoft corporation logo with green bar and i am not getting the same in my new installation what went wrong.
View 8 Replies
View Related
Oct 27, 2009
It simply disables display.
My screen goes blank right after the glowing windows logo.
This is a fresh install.
It's an ATI card. Brand new. It was working (for 2 weeks) on vista perfectly.
I understand that there is an issue with ATI catalyst control center.
with all due respect, I can't load a driver if my screen is disabled.
View 9 Replies
View Related
Dec 21, 2012
HP G60 laptop, after the unit has been on for 10min or more it has a random issue with the display going blank. If you move the mouse the display comes back as long as the mouse is moving. Stop moving the mouse the display goes blank. Sometimes if you let it sit awile it will start working again. It is now so bad the computer is not useable. It has McAfee protection and I run system fix it utilities 11.
View 2 Replies
View Related
Mar 28, 2011
I'm trying to install Windows 7 on my PC again, and came to a blank screen after the reboot. I have the PC hooked up to a TV using the S-Video output on my graphics card, and suspect that win 7 is using the DVI port instead. There is no way at the moment that I can use the DVI port because I don't have a monitor that supports it.
is there a way around this so I can use the S-video output for the rest of the installation?
View 3 Replies
View Related
Feb 23, 2012
I'm trying to install Windows 7 on a new SSD, my old hard drive crashed. My video card is an onboard ATI Radeon HD 4250. Initial setup works fine, but when the computer reboots it comes back up blank. I'm already running two monitors, one VGA and one DVI, and safe mode doesn't work either, I've tried booting from a flash drive and a dvd with exactly the same results.
View 9 Replies
View Related
Sep 15, 2012
I am using windows 7 ultimate on my samsung laptop. today I tried to install ubuntu in dual boot mode with my windows 7. I installed ubuntu 12.04 on e drive( mounted as ext 4) and 1.5 gb of swap partition..the installation went smooth but when I restart I get a blank screen with crusor blinking?
View 4 Replies
View Related
Jun 15, 2010
The computer goes blank right after Windows starts up as it's supposed to go to the login screen, and the cursor was the only thing to appear. My answer to everything is to basically reinstall Windows 7 and start over, but after inserting the disc, begining the installation, and going through most of the motions....after Windows restarts again the screen goes black. Before I tried to reinstall Windows I was able to use the computer in Safe Mode, but after the reinstallation failed I can't reach safe mode. I can't seem to find a way to finish the installation.
View 6 Replies
View Related
Dec 8, 2012
two day ago i turned on my pc as usual. But it did not boot, instead i got a black screen with blinking cursor, so is there any way to make my pc recover from this issue.
I've tried the f8 , it has No effect I even re installed the os but it does not work.. It does all installation work asks for my name and pc name . Then it does the video and perfomance testing . Then it restarts and i again get the blank screen with blinking cursor.
View 2 Replies
View Related
Dec 13, 2009
I was on my Compaq V2310US laptop and noticed it was running slow, so I decided to run chkdsk just for the heck of it. It appeared to freeze at around 33%(but now I dont think it did), so I turned it off. I restarted it, noticed that it just stayed at 33% for awhile and left it this time. Now when I start windows 7 ultimate, it says "starting windows" then boots to a blank screen. No welcome screen or anything.
The mouse pointer is there and my wlan button and capslock work, but the mute sound button doesnt respond. If I boot in safe mode, CLASSPNP.SYS is the last file to load and I get the same black screen problem. Im wondering why theres no AGP440.SYS.
I have the ATI M200 chipset and when I updated it awhile back, my PC did the same thing, however I was able to go into safemode and uninstall it. I got another option to update it a week later(which made windows aero work) saying the driver was for windows 7 and it worked. My advanced options are limited to the 3 safe modes and normal mode. Startup repair didnt do anything.
View 3 Replies
View Related
Jun 25, 2012
I have had an issue the past week with my computer both loading and shutting down and I also have an issue with hiccups during gaming...
I have downloaded Malwarebytes and Superantispyware to see if I have also attempted to update all my drivers via windows 7 option
computer specs:
Intel Core 2 Quad Q6600 not overclocked
2x 2GB Mushkin Enhanced Redline DDR2 Ram
2x 2GB corsair DDR2 Ram
EVGA Superclocked GeForece GTX 560 Ti
EVGA Nvidia nForce 750i SLI
Antec High Current Gamer 900w PSU
Western Digital Raptor 160GB 10000RPM (Dont remember exact one)
Windows 7 64-bit Home Premium
View 1 Replies
View Related
